NOT ALLOWED TO INSTALL!!!

I downloaded the iTunes software 8.0.1,
* I'm trying to install the software.
* I uninstalled the old version.
* I ran Registry Doctor.
* I rebooted the computer.
"There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
And it uninstalls iTunes afterwards.
What's up? I can't update my iPhone without iTunes!

Uhp. I fixed the problem. Nevermind.
It took using "Windows Install Clean Up" utility and deleting all the installation notes on my computer.

Similar Messages

  • Not allow to install AE & Pr on Leopard?

    Hi All,
    I am using OSX Leopard 10.5.8 right now. Yesterday I tried to install Adobe CS5 Master Collection, and I found that I couldn't install Adobe After Effects CS5 and Adobe Premiere Pro CS5 (which are both 64-bit based) (The main installer hid the options of AE and Pr) . I checked the system requirements again, and it showed that there shouldn't be a problem to install these programs on Leopard.
    Can anyone help me to solve this problem? Please please please!
    Valent

    AMD Phenom(tm) II X4 945 Processor4 GB DDR2 - 800ATI Radeon HD 4870 1024 MB1920x1080x32
    Date: Mon, 3 May 2010 04:09:29 -0600
    From: [email protected]
    To: [email protected]
    Subject: Not allow to install AE & Pr on Leopard?
    Please provide ALL available info about your hardware:  processor, RAM, video card, display resolution etc.
    >

  • Safari does not allow to install USB drivers downloaded from certain websites

    Safari does not allow to install USB drivers from http://www.flymaster.net/Products/LIVE/tabid/143/Default.aspx
    I don't know what to do to allow downloads from www.flymaster.net to be installed.

    Welcome to Apple Support Communities
    Can you download the driver properly or the error happens while the driver is being downloaded? As you are saying that you can't install the driver, check this website > http://support.apple.com/kb/HT5290

  • I wanted to watch a BNN video on my iphone 4, but I was told I needed Adobe Flash Player. Adobe says Apple does not allow to install Flash Player on iPhones. Any suggestions?

    I wanted to watch a BNN video on my iphone 4, but I was told I needed Adobe Flash Player. Adobe says Apple does not allow to install Flash Player on iPhones. Any suggestions?

    See if BNN has an app in the app store or do without.
    Adobe does not make a flash player for ipod/ipad/iphone and likely never will.
    You can do a forum search and find coutless posts on this.

  • Desktop manager does not allow to install 5.0 Firmware

    Hi all,
    i got following problem. I try to upgrade several 9000 and 8900 to FW-Versions 5.0.0.190 or higher.
    The Desktop-Manager recognizes the installed Firmwares and shows them BUT marks them with an asterisk.
    Then it states
    "only users with an activ subscription the the Blackberry-Service are allowed to install this BB Device Software."
    Can anybody help me with that problem ?
    By the way: it worked once or twice , but now, on any PC i install the Desktop Manager and the Firmware Files this error occurs.
    Greetings from Munich, germany,
    Markus

    The device you are upgrading must have an active connection to a BlackBerry Data Plan.
    You will see this message if you do not have a data plan on their BlackBerry and they try to use Desktop Manager 5.0 to upgrade to BlackBerry Device Software 5.0 or greater.  Sometimes you will see this error if the user has never turned on the mobile network on their device so that might be all that is needed to work around this.
    This is a new requirement of RIM for devices upgrading to OS 5
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MacBook Pro 10.8.5 not allowed to install server software - needs 10.9.

    Brand new MacBook Pro updated software to 10.8.5 but will not let me install server software because it says I have to update to 10.9.  I don't see how to do that anywhere.  New Mac user
    Thanks for any help.
    This is a new laptop I am helping setup for a school.  it needs the server software to run configurator that will control a couple of ipads for the children.  Cant seem to get past this first step of trying to install server software.
    Thanks
    Jason

    Open up the  App Store from the Apple logo. In the Featured tab search for OS X Mavericks under Top Free. This is 10.9. Click on the Free Upgrade option which should update the Mac to 10.9 which will hopefully allow Server to run.

  • Two issues: Mail dotcom is now telling me to enable java in my browser and firefox has issues w/duckduckgo search engine. I am not allowed 2 instal DDG n search

    2 issues: After a windows update on 5 10 2012, maildotcom says I need to enable java in my browser, when as far as I can tell, it is.
    Second issue is, I am not able to add duckduckgo as my preferred search engine. I get a pop up in search tool add-ons that says "sorry, you need a Mozilla based browser to install a search plug in."
    Why and how can these irritations be fixed?

    '''''<u>NoScript</u>'''''<br />
    *To add a site to the NoScript "whitelist" ('''always allow''') --> when on the site, click the NoScript icon and choose "Allow ''site''"; the site will be placed on the NoScript Options > Whitelist (non-italicized).
    *If you click "Temporarily allow ''site''", the site will be allowed during the Firefox current session (until you close/exit Firefox) and will be placed on the NoScript Options > Whitelist (italicized) and will be removed from the whitelist when you close/exit Firefox.
    *NoScript Whitelist --> click the NoScript icon, choose Options, click the Whitelist tab
    '''''<u>DuckDuckGo</u>''''' (you probably would want 1 & 3 or 2 & 3)<br />
    #This adds a DDG '''toolbar''' and says it adds the "''encrypted (HTTPS / SSL) version of DuckDuckGo in your '''search bar'''"'' --> https://addons.mozilla.org/en-US/firefox/addon/duckduckgo-ssl/
    #You can '''add only an item to the Search Bar''' (without a toolbar) by choosing one of the items here --> http://mycroft.mozdev.org/search-engines.html?name=duckduckgo&opensearch=yes
    #You can '''change the Location Bar search''' (replacing the default Google search) by following these instructions --> http://ilias.ca/blog/2012/03/how-to-make-firefox-use-duckduckgo/
    This DDG page says there is some problem installing DDG plugins but does not explain the problem or who is responsible for fixing the issue
    *http://help.duckduckgo.com/customer/portal/articles/216441-firefox
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • EPM system Installer 11.1.2.2 is not allowing to install all Products

    Hi All,
    I am trying to Install EPM system 11.1.2.2 in Solaris machine, but in the Product Selection it is allowing to select only "Foundation Services" and all other Product Components are disabled.
    Note:
    EPM System Prerequisites check is showing that all prerequisites are okay.
    This is the New Installation and no existing EPM installation is there in this box.
    Have used the same assemblies in other Solaris box and it is working fine there. Please advice what can be the prospected reason for it.
    Thanks in advance.
    Regards,
    Abhay

    Hi,
    Have you extracted all the product components assemblies to the same folder from where you are launching the installTool.cmd/.sh?
    The products that are grayed out is because you don't have zip files or assemblies extracted to that folder??
    So try extracting all the product components zip files to the folder and then launch the installtool.cmd/.sh.
    I am sure that you will then be able to select and instakll the products ..
    Regards,
    Sourabh

  • Not Allowed To Install Adobe Reader 9

    I'm using a G4 eMac with 640 megs of RAM running Mac OS 10.4.11. According to the system requirements, I should be able to install Reader 9 with no problem.
    Download of the install package went fine.
    I'm able to open the Adobe Reader 9 install, but then I get a message saying
    "Adobe Reader 9 cannot be installed on this computer.
    Make sure your system meets the requirements."
    Help.

    Thanks for responding quickly. It's definitely the Mac installer package (it's called "AdbeRdr90_en_USi386.pkg", and it does open up. And I downloaded it via the Adobe site, which asks which version of Mac OS is being used, prior to even allowing a download.

  • 10.7.1 Lion not allow to install scanner Microtek ScanMaker 5900

    Why does not recognize the scanner?

    Microtek is famous for not providing drivers so that their old scanners can work with newer operating systems.  The last time I upgraded the teachers' computers in my schools 300 Mircotek scanners insgtantly became trash  I don't buy them any more.  won't waste taxpayers' money.

  • Usd wifi expander (Asus) driver not allowed to install

    i download drivers for usd wifi expander (Asus)  usb-N13 B1but the pc not permitted to open because of the follow remark "installer.pkg can't be opened because it is from an unidentified developer. please assist.

    Why are you using an extender with Keynote?

  • Resolution (1024x600) does not allow to install Media Manager. Alternativ​e available?

    GDay,
    I've tried to install the Media Manager on my new netbook, which has a max resolution of 1024x600. Media Manager requires 1024x768. It comes up with a warning and closes the installation process.
    is there a way around it?
    Appreciate any advice.
    Cheers.

    I have temporarely solved my problem. I got the Media encoder CS6 folder out of my trash bin and put it back in the apps folder along with the CC version and everything works like a charm.
    Thanks anyway!

  • HT200189 Updated 10.9.1 but will not allow me to install VPN Update

    Updated OS X to to v. 10.9.1 and restarted computer twice, but will not allow me to select a destination for VPN Update for OS X Server software; error says "VPN Update for OS Server can't be installed on this disk (MacIntosh HD). This volume does not meet requirements for this update.
    I also updated OS X Server from the App Store to latest 3.0.1. and still does not allow me to install the VPN update.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Having a problem with noises and mouse jumping, tried to reinstall and computer will not allow me to select the correct install icon.  Sends me to xcode install

    my kids computer began acting up this spring...so I shut it down. 
    Would not stay turned off, various noises almost continually, jumping highlights, etc.
    Decided to reinstall os x snow leopard.  insert disc and icon appears.  then 3 icons with x in a column.
    automatically highlights middle icon and will not allow me to select one above.  Says install xcode.
    not what i want to do. 
    any help?

    What model iMac do you have?
    What version of Mac OS is it running? If you don't know, try to give approximations on when it was set up and whether it was ever updated so we can take our best guess.
    How are you trying to boot from the install disc? Your description of 3 icons with x in a column' leads me to believe that you aren't booting from the install disc, but rather you are inserting the disc after booting from the OS that is installed on the hard drive. If that is what is happening you'll see something like this, although it will vary depending on the actual version of the Install Disc that you have and how you've chosen to view the files (icon, list, column, etc).
    What happens if you restart the system with the Install Disc inserted, then quickly hold down the 'c' key so that the system attempts to boot from the Install Disc. Do you still experience the same issue?

  • I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

    Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
    I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

    The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

Maybe you are looking for

  • IMessage not working for one recipient, but is for others

    I recently restored my iPhone 4 from an iCloud backup (I accidentally deleted 2.5 years worth of messages from my fiancee that I didn't want to lose).  Now, I can use iMessage with everyone except for my fiancee.  I've tried several other people, and

  • My iPad adapter doesn't work

    My adapter only seems to work with one outlet in my house. It didn't have this problem before today. Any ideas why?

  • Move automation data  at same time  in differenct tracks?

    hi , anyone here can give me some sugesstion ? I want to move the automation data in different track at same time but i cannot find how to make it . I have 7 tracks all written automation volumn data , and now I want to move them all 3 db down in som

  • Create Spoolrequest for PO

    Hi, I have a question how to create a spool request for a sapscript PO form. In my case I want to write a program which sends a PO via Email. For this I need to create a spool request for the mail to convert it to PDF and send it out. Converting to P

  • How to get a list of deleted VMs

    Hi Everyone, I am trying to generate a list of all VMs that have been deleted/removed in a particular SCVMM Cloud within a specific period of time (i.e. YTD).  For example, I use a PowerShell Script to generate a list of all VMs that have been provis