Not displaying Actual cost Line Items for Order

Hi Gurus,
Recently we did patching from SPC6 to SPC8. After patching we noticed that could not able to see displaying Actual cost Line Items for Order from work order.
System is not throughing error message when I double cline on line item at Plan/Actual Comparison screen in work order cost tab.
We can able to see the same from KB01 with out any problem. I have attached the details.
Could any one suggest me please. Appreciate your thoughts
Regards,
Srini

Hi Paul,
I have implemented this note and get it sorted out.
Thank you for support.
Regards,
Srini

Similar Messages

  • KOB1 - Display Actual cost line items for Orders

    Hi All
    A production order has been settled. When the actual cost line items are displayed for the said production order in KOB1, there are multiple line items related to the production order that gets displayed.
    The issue we are facing is, in one of the line item, the accounting document has one credit (Consumption a/c) and two debits (one debit is to inventory a/c and another debit is to price difference a/c). However in the report, in the offsetting GL column only one GL code (price difference gl account a/c) but appears with the entire amount.
    Ideally two separate line items needs to be displayed with respective line items. Is this a flaw in SAP.
    Can anybody throw some light on this and help me.
    Regards
    Prasanna

    this is may be config issue.
    can you explain with accounting entries for said line items and offsetting GL for each line?
    regards.
    ashok

  • Additional Data On Actual Cost Line Item for Orders. Possible?

    Is it possible to show on display of Actual Cost Line Item for Orders the cost center for both settled and not yet settled? As for now we can only view the cost centers that are already settled. Please see attached file for a snap picture of the display.
    Thank you in advance.

    Hi,
    How this would be possible? If the document is not yet settled, then cost centre is unknown. Of course, it is stored in settlement rule, but no actual posting was done yet.
    Regards,
    Eli

  • FM for Actual cost line items for orders.

    HI EXPERTS,
    I was working on Actual cost line items for orders / Internal orders of an employee.
    standard program RKAEP000 is present through TCODE KOB1.
    I want some customization of report, so debugged the program and found that its using a FM 'K_LINE_ITEMS_SELECT_AND_LIST' to calculate internal orders.
    But the FM has used REUSE_ALV_* and displaying output itself.
    the requirement is to customize the output display .
    I searched with K_LINE_* and found some other function modules too.
    K_LINE_ITEM_CHECK                                                                               
    K_LINE_ITEM_APC_SIGN_GET                                         
    K_LINE_ITEM_GET_CONTEXT_MENU                                     
    K_LINE_ITEM_GET_TOOLBAR                                          
    K_LINE_ITEM_LOGICAL_KEY_GET                                      
    K_LINE_ITEM_TECH_SETTINGS_SET                                    
    K_LINE_ITEM_VALUE_TYPES_GET                                      
    K_LINE_ITEM_VALUE_TYPES_SET                                                                               
    K_LINE_ITEMS_ACT_GRID                                            
    K_LINE_ITEMS_SELECT                                              
    K_LINE_ITEMS_SELECT_AND_LIST                                     
    K_LINE_ITEM_ACT_CALL_WITH_DATA                                   
    K_LINE_ITEM_ACT_DATA_GET                                         
    K_LINE_ITEM_CM_CALL_WITH_DATA                                    
    K_LINE_ITEM_DEV_CALL_WITH_DATA                                   
    K_LINE_ITEM_PLN_CALL_WITH_DATA                                   
    K_LINE_ITEM_PROCESS_UCOMM_ACT                                    
    K_LINE_ITEM_STEERING_GET                                                                               
    Can anybody tell which FM should i use so that result i will get in an internal table?
    or suggest any other methods
    Thanks in Advance.
    Lucky

    I also had the same requirement and used function module K_LINE_ITEM_ACT_DATA_GET
    this function is calling K_LINE_ITEMS_SELECT_AND_LIST function with  I_NO_DISPLAY parameter
    and returning the result.
    Already they are in same function group,
    I wrote this for future requirements of people  after 4 years of this thread

  • Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

    Hi,
    When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
    - Buildings
    - PC & Small Applications
    On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
    Could you please help!
    Thanks,
    - Deki

    Hi Murali,
    I have one depreciation expense account (P/L Account) which is also a cost element.
    During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
    Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
    - Buildings
    - PC & Small Applications
    Any thoughts on why the above aren't showing?
    Thanks!  I really appreciate your help!
    - Deki

  • Actual cost line items for orders (KOB1)

    Hello everyone,
    I need to pull a certain field for an order to the
    Actual cost line items for orders report (KOB1), but the field is not available when I
    go to the change layout. Can someone let me know how I can have this
    field listed?
    Thanks in advance for your reply.
    Daniel Nicula

    Hi Christian,
    Ok, so I would need some ABAP support for this right? I was hoping to do it myself.
    But, the strange thing is that the field that I would like to bring in my layout is available in 2 clients in the same system and not in all the clients. I have one client in which this field is not available.
    How can that be possible?
    Bye!

  • Table where i see actual cost line item for order (KKBC_PKO)

    Dear.
    Using transaction KKBC_PKO i can see the actual cost line item for order.
    In which table I see these data ?
    Thanls

    Hi,
    check COEP (CO actual line items) the objectnumber is OR+the order number.
    Best regards, Christian

  • Table where i see actual cost line item for order (KRMI)

    Dear.
    I need to know the table of every single document number of a cost element that I see in the actual cost line item for orders using transaction KRMI.
    Thanks
    Moderator: Please, search SDN

    Hi
    Refer the field Object No (OBJNR) in COEP.. In your case, the OBJNR would be ORXXXXYYYYYYYYYYY, where OR means Order, XXXX = Contr Area and YYYYYYYY = Int Order No with preceeding zeroes
    Qty is also recorded in COEP
    BR,Ajay M

  • Actual cost line items for network

    Hello all,
    is there a way to display actual cost line items for networks? I have tried the following ways:
    - CJI3
    - KOB1
    When entering only the network number, the error message KB422 is displayed (No line items were selected). When entering the WBS number to which the network is attached the costs are displayed.
    Any ideas? Thank you!
    Regards
    Christian

    Christian Philipp wrote:
    H
    > When entering only the network number, the error message KB422 is displayed (No line items were selected).
    There is no actual posting against the network exists.
    Christian Philipp wrote:
    When entering the WBS number to which the network is attached the costs are displayed.
    after running double click the document number and check the account assignment whether it is to WBSE or to Network activity. It will clear your doubt.

  • Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

    Hi Gurus,
    I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
    When i execute the report for a cost element  510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
    My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
    Kindly adivce

    Try to look if there is any filtering criteria applied in the report to which you drill-down.
    The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

  • Display Variance line items for Orders

    Hello Sapients,
    I am trying to execute Transaction code KOB3 (Display Variance line items for Orders) ( /n > Accounting> Controlling > Product Cost Controlling > Cost Object Controlling > Product Cost by Order > Information System > Reports for Product Cost by Order > Line Items > KOB3 )
    But for some reason I do not see any thing.
    Your Advise is greatly appreciated.
    Thanks and Regards
    Ravi

    There is no problem with Authorization.
    And i am checking for the correct cost elements and prorcess orders.
    Not only KOB3 but also the related reports are not working (viz: GR55-> 7KV9)
    thanks and Regards
    Ravi

  • Internal Order - KOB1 - Actual Cost Line Item Report

    Hi Friends,
    I need to understand how the KOB1 Report - Actual Cost Line Item works.
    As per my understanding when ever there is cost posted with assignment to Internal order this report should reflect the amount.
    We have a PO with account assignment to Internal order and Asset.
    When Goods Receipts is posted the with posting key 70, the report is reflecting the amount.
    When Invoice Receipt is posted KOB1 report is not reflecting this amount.
    There is one Invoice receipt posted with  entry
    31 Dr
    70 DR
    86 Dr GR/IR
    and the 70 debit amount is coming in the report.
    So can any one please tell me does this report show all the entries with IO assignment or when posting key 70, 75 ,80,81 are used.
    And also is GR considered as cost posting or IR considered.
    This issue has been pending from 3 months.
    Appreciate your help.
    Thanks
    Satish

    The KOB1 line item report will show you any expense account posted to that order.
    Basically you are the order collecting the cost. During the invoice receipt, the expense account are not involved, except in cases of a price difference.
    The vendor account credit and debit to GR/IR are not concerned with the order.

  • Plan cost line items for cost centers report

    Hello,
    I am displaying the report: Plan cost line items for cost centers and when I display the details of a line item it appears a document number, where could I display this document?
    I have tried to display it in FB03 transaction but it seems not to be this kind of document.
    On the other hand in the field Business transaction it appears RKP6, what is the meaning of this field?
    Thank you very much

    Hi Beatriz Amezua ,
    For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
    RKP6 means "Planning Activity Dependent Costs"
    Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups --  Display Groups
    Srikanth Munnaluri

  • Filtering only the Actual cost line items resulted by confirmations in DP91

    Hi,
    I have DIP profile and in that Material Determination Charactersitic is Activity Type.
    In DP91 system is pulling  the following cost line items
    1.ACTUAL cost Line items resulted due to confirmations of operations and in this ACTIVITY TYPE will be there.
    2.ACTUAL cost Line items resulted due to OVERHEAD and in this ACTIVITY type will not be there.
    Since Activity type is not there for the OH line items,its throwing Material Determination Error.
    One option is filter the line items based on Cost element category using exit . But is there is any option in standard way for not considering  the OVERHEAD line items in DP91 RUN.  Pl suggest.
    Regards
    SB

    SB,
    You'll need to add a Characterisitic to your DIP Profile which allows to to selectively filter the overheads.
    Try the cost element (if its different from the confirmation c/e)
    PeteA

  • Project Actual Cost Line Items (CJI3) - Need Invement Profile Key also

    Hi All,
    We are trying to execute the report "Project Actual Cost Line Items" through Transaction Code CJI3.
    We need Invement Profile Key also in the out report of CJI3.
    Is there any Standard SAP report to get Invement Profile Key as well along with normal CJI3 output.
    Please let me know in case you find any such Standard SAP report.
    Thanks in advance for your help.
    Regards,
    Srinivas

    Hello Sreekanth
    Thanks for your input. Yes it is working now after posting cost under same CE as what I have maintained in Base of costing sheet on required WBS..
    I was under impression that the cost lying in cost center can be pulled out indepedantly on WBS through costing sheet  based upon percentage mentioned in overhead.However I am observing now that the cost posted on WBS is taken as base amount to calculate overhead.
    In my case, Eur 100 cost is posted under primary cost element 652100 on WBS and Eur 2000 cost is posted on Cost center under same Cost element Actually I am required to pull out some percentage of cost Eur2000 on cost center to WBS. However,
    currently it is taking Rs 100 (posted on WBS) as basline cost and calculating overhead over it and posting it to WBS again under overhead cost element.
    Can we handle this through costing sheet or for that Assessment distribution is must?  May I expect the answer.
    Best Regards
    Adwait

Maybe you are looking for

  • How to call a private method in a JFrame

    I have a Frame which has some properties like its size, bgcolor plus other parameters, as instance variables. There is a button on the Frame with the caption : "set properties". When one clicks on that button, a new frame should appear via which a us

  • How do i Call an a method on and object that is a parameter

    I have thee code as below. I want to call the method setValue and set the value and pass it a String. i want it called on the jobject param1. What do i need to call todo that given the below code. JNIEXPORT jobject JNICALL Java_PassObjectAndDoSomethi

  • Slow moving item question

    Hi, I have the following requirement. "Show all customers who have no sales in any given time period" I have implemented as per the following link http://help.sap.com/saphelp_nw04/helpdata/en/3a/d1603d13b5c72ee10000000a114084/frameset.htm I have used

  • Filter plugin. Problem after change image depth.

    Hi All ! I already wrote filter plugin it work fine but only for image depth 8bit, after i change image depth on 16 or 32 bits I getting error msg box from photoshop. I try change on 'destination.colBits = 8' or 'destination.colBits = pChannel->depth

  • SCDPM 2012 R2 Backup with Exchange 2013 SP1 CU6 DAG

    Hi, Correct me if I'm wrong. DAG setup as follow, 1. Server1\MBX01 (Active) 2. Server2\MBX01 (Passive) DPM 1. Select Full for Active 2. Select Copy for Passive We always select active copy so that logs can be purge.  On the other hand, if we select b