Not displaying tax value in condition tab in PO
Dear MM experts,
I have a problem in condition tab in PO, I have applied a tax code (input tax) in the invoice tab, the tax (or condition) value is calculating and showing in the tax details.
But i am not getting the tax value in condition tab and the condition value is showing zero in item condition details.
Whats the process required to tax (or condition) value in condition tab in PO.
Plz help me to overcome this problem.
Thanks in advance
Prasant Sekhar
Hi,
Create the condition record throgh trx MEK1.
it will appear in Invoice tab not in Conditions..
The COnditions in Condition Tab will come through Pricing procedure..
Thx
Raju
Similar Messages
-
Hi,
I have applied a condition for Sorting in ascending order as Top % and 100 for the selected Key Figure.
However, the report does not display Zero values for the key Figure after sorting.
How can i take care of this limitation?
Regards
ShwetaHi Shweta,
if u r using condition for ascending then ur zeroes should come in that range , if it not then u have to increase your value limit . But this will depend on your requirement ..
Regards.. -
Display extra values not displaying extra value
Hi,
I have a SQL query that returns a LOV. I have "Display Extra Values" set to Yes. However, I don't see my "extra value" in the Select List. ?? Yet, when I check the session state, the value in the session state is the extra value. So how come I don't see it in my Select List?
Thank you.This is from the on-line docs:
To define a value that does not display in the list of values:
a) From Display Extra Value, select Yes.
The extra value is used if the actual column value is not part of the LOV. In that situation, the actual value is shown. If you do not display extra values, you may end up with the wrong value and unintentionally update your data incorrectly.
b) In Null Value, specify the value that displays.
c) If you have not selected a Named LOV, enter the query used to display a select list in the LOV Query field.
Hope that helps.
Thanks,
Joe -
Net value on condition tab in a STO
Dear Guru's
I have manage to get the valuation price displayed in the STO PO condition tab in condition P101.
I've also managed to get the P101 condition to display in the net value field in the condition tab when pressing the "update price" button in the condition tab.
However, how do I the condition P101 to display in the net value field automatically?
I have it done in our old 4.7 system but do not know how I did it
Thanks in advance,
ThomasMissed a transport
-
Wants to change value in Condition Tab ( ZOTL ) of PO
Dear Expert,
I was created subcontracting PO with item category L. In condition tab I put value 10,000 for other charges by mistake I want to change that value 1,000.
PO quantity is 1000 and I did GR of 600 material quantity for that purchase order.
Is there any possibility to change condition value without reverse back GR ?
or any other condition in which I cancel the value in difference ?
or any other way to settle that PO and invoice payment ?
Please provide the solution.
Thanks,
Farrukh khanHi,
only solution is without cancel or revese GR is to do Credit memo for that vendor.
Thanks & Regards
Suresh -
Dynamic Select List not displaying correct value
Hi there!
I have a page with a dynamic repeat region.
As I press one record I get up all the details based on id on an edit page.
The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
All the other values are correct, also the values in the repeat region on index page,
but the value from the Select List on edit page is just displaying the initially selected item.
Have tried using SELECT DISTINCT in the SQL statement, but no luck.
Any other ideas?
Cut and paste from form:
<select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
<option value="Ev" selected="selected">Ev</option>
<option value="Fv">Fv</option>
<option value="Rv">Rv</option>
<option value="Kv">Kv</option>
</select>
Recordset
<%
Dim rsAs
Dim rsAs_cmd
Dim rsAs_numRows
Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
rsAs_cmd.ActiveConnection = MM_LabCon_STRING
rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
rsAs_cmd.Prepared = true
rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
Set rsAs = rsAs_cmd.Execute
rsAs_numRows = 0
%>
Regards,
Christian
DWCS5 | .Asp | MS AccessOk, here goes the top down approach...
In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
<div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
<div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
The actual javascript function that is contained in the 108.js file is:
function showHideDiv(objThis, inBool){
var divid = "div" + objThis.id.substring(3);
if (inBool) {
ShowDiv(divid);
else {
HideDiv(divid);
That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
function ShowDiv(divid){
eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
function HideDiv(divid){
eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
Hope this helps. -
Setting DAQ channel by property node does not display the value
I am writing a configuration VI to set channel selection and calibration parameters for an SCXI chassis. I store a default setup in a configuration (ini) file and read that file automatically when the VI is called. The value from the file are set by property nodes using the "Value" property. The values from the file do not display in the DAQ channel selection rings, but the numerical calibration values do display correctly. When I click the down arrow in the channel rings, the correct value displays.
This behavior exists both in LabView and app-builder EXEs. Also, if I change the property nodes for the DAQ channels to local variables, it works. The Value (signaling) property doesn't cause them to display
properly either. Why can't I use the property node?I don't understand exactly what you are trying to do.
Please upload a simple VI to demonstrate the behavior you are describing. Remember also to attach the .ini file.
Best regards,
Philip C.
Applications Engineer
National Instruments
www.ni.com/ask
- Philip Courtois, Thinkbot Solutions -
Filter not displaying all values
When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
Is there a setting I am missing?I think that your description of the problem doesn't help a lot. Are you using interactive reports?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Pivot table not displaying the values correctly
Hi,
I have created a pivot table in which i am using 2 tables. I pulled columns from table A and one column from table B in the measures section to get the grand total. All the rows are comming fine but, its not returning any values for tableB's column(if i pull it into measures).
If the column stays under rows section, the report is comming out fine.
I need the total to be displayed in the report.
Can some body help me with this.
ThanksHi David,
i have set the column's aggregation to sum, and it is comming out correctly in the grand total, how ever, i have some of the coulmns which i am taking the %
col3= (col2/col1)*100
col1- aggregation set as Sum, col2 and col3 is set as default
The values for col3 are comming finr in report , where as it is not returning correct value for garnd total row.
ex: row w--- col1 col2 col3
row1-----6630 1130 17.04
row2 6114 994 16.26
total 23317 3739 56.40(should be 16.2..)
For col3 it is calculating like this(3739-total of col2/ 6630 -first row of col1 *100)
Instead of taking total , it is taking the first row.
I tried different aggregations, but was still unable to get the correct value. Can you please let me know if i am missing anything.
Can we define custom aggregations.
Thanks
Gayatri
Edited by: user12589255 on Aug 3, 2011 2:55 PM -
Loupe not displaying color values Aperture 3.4
I've been having issues with the color value feature of the loupe disappearing although 'display color values' is checked. It will stop working after I've been using it for a few hours without incident. Sometimes fix itself if I quit Aperture, most of the time this doesn't work. All of the loupe's other functions seem to work normally, even as the color data is not displaying. I have the issue while tethering and while editing/reviewing. I use the color value feature often, so it's pretty obnoxious.
Camera is compatable, and all my software is up-to-date.
Thanks for your help!What is your MacOS X version? Your profile signature (PowerBook, Mac OS X (10.4.11)) cannot be right, if you are using Aperture 3.4.
Testing with Aperture 3.4.3 on MacOS X the color values will vanish, when I do not use the "Use Centered Loupe" option. With the "Centered Loupe" the values will always be shown. How is your Loupe set?
Regards
Léonie -
Crystal Report V9 do not display decimal value HELP!
<p>I have a field in Informix data type is Decimal(6,2)</p><p>when i used the field in the report, the decimal is not displayed</p><p>example: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!</p>
<p>have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.</p><p>have tried the formula as well but still doesnt work.</p><p>any other possible solutions, pls help, thanks.</p>
-
PC report S_E38_98000088 does not display periodic values
Dear colleagues,
In ECC6.0/new GL we are trying to use report S_E38_98000088 to display Actual/Plan values for a specific month/period, but it looks like the system will always show a cumulative value since the beginning of the fiscal year.
We enter the following on the selection screen:
Currency type: 10
Company code: XXXX
Account number: XXXXXXXX
Ledger: 0L
Controlling area: XXXX
Plan version: 1
Fiscal year: 2011
From Period: 4
To period: 4
Profit Center: XXXXXXX
But when we execute the report, and srill down to the line item level, we see that the report picks up all posting in 2011 instead of 04.2011 only.
The same happens if we try to execute the report for 12.2010 - it will select all postings in 2010.
Anyone knows why is it working like that and how can I display a specific period?
Many thanks,
Yoel.Shalom yoel,
this is not a bug.
Please bear in mind that this report shows cumulative values
for Balance Sheet accounts.
The calculated keyfigure BILWERT (Balance Sheet Value) behaves in
different ways for balance sheet and for P+L accounts. For balance sheet
accounts it always provides you with cumulated values. For example
for period 6 to 6 it will show cumulated value for periods 1 - 6 plus
balance carry forward value.
The BILWER is calculated like:
BILWERT = WERTB + WERTE,
WERTB - Balance sheet accounts value
WERTE - Income statement account value
But if an account is a P+L statement account, you will see the
real period balance value for the particular period range. It means,
that for period 6-6 you will see value for the single period 6. For
period 1-6 you will see cumulated value for period range 1 - 6 without
balance carry forward.
The report behaviour is dependent on your Financial Statement Version
(FSV) and how the particular accounts are valuated.
It means the following:
~~~~~~~~~~~~~~~~~~
1) All accounts assigned to the nodes "Assets" and "Liab+Equity" are
taken as balance sheet accounts and cumulated values are provided
for those accounts by report S_PL0_86000028 (and other GL reports)!!
2) All accounts which are not assigned within the FSV at all are
considered as balance sheet accounts and cumulated values are
provided by GL drilldown reports.
3) All accounts which are assigned OUT of "Assets" and "Liab+Equity"
nodes within particular FSV are taken as Profit and Loss acounts and
period values are provided for them in the GL drilldown reports
The original settings (which you can see under T-cd: FS00) has no
influence on it when using the FI-GL drilldown reports.
Please take into account the note 1154817 and the documentation
to OB58 and RFBILA00 how should define the correct FSV structure.
That is the design and usage of the hierarchy of the Financial Statement
Version and key figure.
There is no error in the standard system
br, Guido -
Off setting account not displaying any values in FBL3N AND FBLL03
Hi Experts,
We did customization and assigned Customer ,Vendor ,plant fileds as special fields in customization client ,which same are appearing in FBL3N and also FBLL03 but without any value.
I post an entry
Rent account Dr
To Vendor account.
If i select Rent account in FBL3N GL line item display ,there is no value updated in vendor filed.Please help me
Rgds
Suma ManiHi,
In the Standard FBLxN it is not available.
These are the steps required to have it available:-
Contra Account in FBLxN
Transaction FIBF
Menu>Settings>Products> of a customer.
New Entry:-
Product = RFPOS
Activ = Set Flag
Save
Menu>Settings>P/S Function Modules> of a customer
New Entry
Event = 00001650
Product= RFPOS
Module = Line_Items_Get_GKONT
Regards,
Amit -
Parent Child Dimension Not displaying Name value.
I have a parent Child attribute in my dimension. It show the correct ID value in the reports but when I change the value from the NameColumn to be something else it still only shows the ID value.
I have an identical case in another dimension and it is working correctly. However this dimension for some reason does not seem to work and I believe they are built the same way I must be missing something. I have tried to show the OrgNodeID
and tried to display the OrgNodename but neither displays all it displays is the intdimParentOrgNodeID.
My dimension table looks something like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID)
intDimParentOrgNodeID
intOrgNodeName
In the Propertys I have set
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumn = tbldimOrgNode.intOrgNodeID
Parent-child values
=NonLeafDataVisible
=*(Direct)
=
=ParentIsBlankSelfOrMissing
=(none)
Ken CraigI have been pulling my hair out for days to find this and what I finally found that resolved this shocked me and I am still not sure why it would matter. You can see below my table and then dimension info. Although I agree my OrgNode ID attribute
is really not needed in AS and could be removed. In places where that is used we could instead rename the key column Dim OrgNode ID to OrgNode ID. However why the key attribute must have the name column set to intOrgNodeID
instead of just using the Key value of intdimOrgNodeID is what I am lost at.
Outside of this parent dimension I have never seen issues with this. I want to say sometimes in the past I have seen duplicates if I use the surreget key to display the actual ID so I have normally left that as a key and just added another attribute
to house the actual ID, like I did below.
Can someone explain to me this and what is the best suggested practice here.
My table is like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID from source and used by customers)
intDimParentOrgNodeID (ID used for parent child (it is the Parent intOrgNodeID surreget
key intdimOrgNodeID))
intOrgNodeName (Source Name)
My AS dimension is like below
Dim OrgNode ID
AttributeHierarchyVisible=False
KeyColumns = tbldimOrgNode.intDimOrgNodeID (Integer)
NameColumns= tbldimOrgNode.intDimOrgNodeID (Integer)
OrgNode ID
AttributeHierarchyVisible=True
KeyColumns = tbldimOrgNode.intOrgNodeID (Integer)
NameColumns= tbldimOrgNode.intOrgNodeID (Integer)
OrgNode Hierarchy ID
Usage=Parent
AttributeHierarchyVisible=True
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumns= tbldimOrgNode.intOrgNodeID (WChar)
Change I had to make was this
Dim OrgNode ID
From NameColumns= tbldimOrgNode.intDimOrgNodeID (Integer)
to
NameColumns= tbldimOrgNode.intOrgNodeID (Integer)
Ken Craig -
MM Pricing Condition Type values in Condition Tab updation while CHANGE PO.
Hi,
The process of PO creation and PO change is through inbound IDOC posting.
I created a PO with configured MM pricing procedure.
While creating PO, the PO is created as required with different Condition Type value break-ups [PBXX, Discount, Surcharge etc] in the PO as required via Inbound IDOC processing.
While CHANGING the same PO, the Condition Type break-ups [i.e. pricing related values] in the PO are NOT changing in the PO via Inbound IDOC processing.
What needs to be done to update the Condition Type break-ups in the PO while changing PO through IDOC processing process?
This problem is not occured while manual / on-line changing of PO valueS and saving the PO & exists through IDOC processing method ONLY.
Thanks in Adv,
RKHi
Try this function module
FM RV_CHECK_CONDITION_VALUE
Regards
Hareesh Menon
Maybe you are looking for
-
How the heck do I install windows on my eMac?
Okay, by the topic heading you all know I'm a serious newb when it comes to anything Mac-related, but I've been messing around in the PC environment for a long time. A friend donated this eMac so I can familiarize myself with how Macs operate, and al
-
Itunes can't work because of old bonjour??
i don't know why my itunes can't work sometimes it can, sometimes it can't i keep install and uninstall itunes almost everyday i tried to uninstall itunes before i install the new one, but i can't get rid of Bonjour. i remove all the programs and fil
-
Dear all, After receiving stock,from COGI how to post the stock against process order. Regards Rajasekaran
-
Transformation in Process Flow
hi I am using owb 11g and i am seeing some existing code which has been built by some one. In Process Flow, i couldn't see any Procedure name and their parameters, Could you some one let me know where i can find those stuff in 11g. thanks
-
OO ABAP is a must or not for Module Pool
Hi all, I want a valuable suggetion from you. Is Object Oriented ABAP Programming is a must for Module Pool Programmer not. Because, I think I am preti much confident abt Module Pool but not in OO ABAP. Please help me out my doubt. Thanks & Regards