Not enough memory to complete this remote panel operation

I am developing my application in cFP 2000. I am using remote panel to view and operate the application. I am able to view the front panel from a host PC on the network for the first time through Internet Explorer (IE6). If I close the IE and then try to access the remote front panel, I get the error "Not enough memory to complete this remote panel operation" What could be the reason for this error. Please help me solve this problem. Thanks in advance.

I agree with Jonas suggestion re: RT Engine Info.
I beileve use need the following line in your LabVIEW.INI file to get that option.
targetmeminfo=true
I threw together a VI that tracks memory usange vs time VI that has preved quire helpful. I will attach this Vi along with a llb that I pulled down of this site somewhere. They have some supprt VI that are required.
What I suggest you do is fire this VI up and watch how your memory behaves. What you will see (hopefully) is memory useage that converges on some constant level. When you open FP via LV-RT or the web served FP's, there will be spikes in memory usage. When these remote FP are closed, the memory usage will drop-off.
If the memory usage keeps climbing, you have a problem!
NOW LE
T ME STOP and acknowledge that you may have some difficulty in trying to use the Get RT Engine info or using my utility if you really are out of memory. Let me suggest that you start by opening and running my utility first. If your code will not run and load with my utility running, don't give up! Try targeting the application and building the VI on the cFP 2000 and setting it to auto-boot. I have found that the compiled vesrions use a much smaller foot print than the development versions. Start your app by ressetting it and then target the cFP unit. You then load and start the utility I attached.
I have successfully deplyed app's that would only run as built app's on the cFP's. The cFP is very good at making you very aware of how you are using memory. THey are just a little tricky to work with. They make you appreciate the luxury of working with the cFP 2020's.
Post your code, and I'll take a look if you like.
Ben
Ben Rayner
Certified LabVIEW Developer
www.DSAutomation.com
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
GetMemoryStats.vi ‏66 KB
MemoryExample6_1.llb ‏85 KB

Similar Messages

  • Not enough memory to complete this remote panel operation (LAN)

    Hi, the problem is, when i try to view or control an application thru a simple LAN, at my work, i recibe the message "Not enough memory to complete this operation"... but both PCs are very closely... So,
    are there limitations related to the amount of data involving in this kind of comminications?, my app process data acquired by a 4472 dsa PXI card, and then show results thru typical graphics...
    Also, i have noted when i perform "control tasks", they have a bad effect on my app (in the server machine), in terms of performance.
    The problems of excessive memory consumption can be avoided, when we used conventional PCs ?  and, ¿The monitoring and the control affect my application performance? 
    Thanks in advance.
    JFT

    Hi Ankita, i will read that document now...
    I work with a conventional PC and a PXI (8175). The problem is when i try to see the remote front panel thru a LAN, my application and the Remote Panel crashes, and the messages is "Not enough memory to complete this remote panel operation....". So, my question is, if it is posible to  avoid this kind of problems? or remote panels are limited to a little apps... My App acquire a lot of data (thru a DSA 4472 daq) and then it process and shows that data without problems until remote panel is activated.
    Sorry my english... and thanks anyway
    JFT

  • Not enough memory to complete this operation windows 8

    Hi All,
    I have a problem whith a built executable where at random intervals I get a windows dialogue saying "Not enough Memory to complete this operation"
    I have searched through the forums and although there are similar posts I have not been able to get rid of this message by trying several things.  My project is a cRIO which connects and disconnects using the STM messenger service.  The HOST computer is a Producer consumer design pattern, the crio is a producer consumer with the producer being incoming TCP IP messages essentially.  The windows 8 machine shows no signs of running out of memory.  There is plenty available (8GB) and during normal execution the program is only using roughly 200MB and is stable.
    Some of the things I have tried from reading similar threads but have had no luck.
    Put a delay in TCP Send function from the cRIO (1mS).
    Disabled all writing to files for polled data / results.
    Run in windows 7 and XP compatibility mode and as administrator.
    Move whole executable into my Documents after suspecting file permissions.
    Made whole of install directory full access permissions.
    Disabled firewall and uninstalled anti Virus as its not connected to T'internet.
    Monitored cached data and disk writes using perfmon.
    Monitored Threads and seem stable.
    This build was also tested on a windows 7 machine and has been run overnight with no problems.  the executable also runs on my development machine with no problems.  The windows 8 machine has no NI max installed (Just the RT engine), the windows 7 does along with VISA drivers etc.
    When the "Not Enough...." Dialogue appears the exe hangs untill the prompt is removed.  Once the dialogue is removed the TCP Queue then catches up with Queued data so I know that there are no queues increasing in size (It has happily stored all polled data from an overnight run and then dequeues all this information to the front panel no problem)..
    Build PC:
    Windows 7 (64 bit) - LabVIEW 2013 (32 bit) full development.
    Target PC (with error message)
    Windows 8 (64 bit) - LabVIEW 2013 RTE (Installed from an installer built on machine above using recommended settings)
    Other Test Target (With no problems)
    Windows 7 64 bit - LabVIEW 2013 RTE, MAX and VISA Installed.
    Is there any way to debug this some more??  Where might I find this information in the windows event logs / perfmon etc??
    Many Thanks in advance
    Craig
    10 years+ LabVIEW experience.
    LabVIEW 2012

    Hi craigc,
    Good job with the current troubleshooting status!
    A couple of things though:
    • Have you tried building the application on the same Windows 8 machine? Does it have the same issue then?
    • Did you try increasing the Virtual Memory usage? Even though this should not haveany  influence if you are using a 64bit machine, it might still be worth a try. There's a tutorial how to do it on Windows 7 here and it should not be very different from Windows 8.
    • You have mentioned that you used perfmon. What exactly did you measure and what results did you log? 
    • Do the pop-ups show up in complete random manner or is there a pattern?
    • What about increasing the delay in TCP Send? I assume you have followed the latter suggestion from this forum post?
    Thanks!
    Mark N
    Applications Engineer
    National Instruments UK & Ireland

  • Im getting an not enough memory to complete this scanning operation error

    I am using a WIA-HP CLJ CM1312 Scanner with Adobe Acrobat 9 Standard Version 9.4.6
    This machine is Windows XP with 3gigs of RAM and plenty of HDD space....
    When I try to make a color copy at a Resolution of 1200DPI I get an error saying that - "There is not enough memory to complete this scanning operation."   It only works at 600DPI
    I dont understand why I am getting this error.  I would have thought my upgrade to 3gigs of RAM would have fixed this error.  

    1200 dpi can actually mean a lot of memory.
    See if the steps under "error messages when scanning" releated to data transfer mode on this page help: http://kb2.adobe.com/cps/325/325262.html

  • Not enough memory to complete this operation

    hi everybody
    i've seen a lot of posts under this heading but could not be able to find out regarding my problem
    when i am trying to open host vi from a project explorer window , after loading about 8500 dependencies (sorry if use wrong word), its starts giving error "not enough memory to complete this operation"
    plz tell me what type of memory is this message telling about?
    regards
    aqib

    How many VIs are in your entire project? Did this problem just start? Are you upgrading to a new version of LV? Can you open smaller pieces of the entire application?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • PDF error - not enough memory to complete this operation.

    A friend with I think LION has this error when they hit print and then save as PDF on a single 1 page doc.
    PDF :  SORRY - not enough memory to complete this operation....
    Any ideas how to fix this?

    Hi,
    not sure - this is the default funtion in osx - when you hit cmd print - then lower left "SAVE AS PDF"
    hope that helps...
    Q is there a way to reset the default app?

  • AEGP Plugin MediaIO Plugin:MediaIO2 error:0x4 not enough memory to complete this encoding (5027::12)

    I am working on a video project in After Effects CS4 (with Trapcode Particular preset) that's 2:12 minutes long on a Windows 7 operating
    system. I'm finished editing for the most part, but everytime I put the video in Render Queue it renders the video for a few seconds (sometimes minutes) and then stops with this message appearing: "After Effects logged one error: AEGP Plugin Media IO Plugin: MediaIO2 error: 0x4 not enough memory to complete this encoding (5027::12)". After I closed this message I checked the part of the video that did render was where I saved it to be as a normal file on my Desktop. I made this video with 2 compositions: 1 for the actual importing and editing and the 2nd for the rendering and thinning it out (this is because when I import the footage from my camera it's always very wide in after effects) There is nothing particularly abnormal about the video, not very heavy or anything and most of it isn't animated, just film. The size of the source material for the video is about 4.0 to 8.7MB.   
    Computer's Processor: Intel(R) Core(TM)2 CPU  T5500 @ 1.66GHz
    Computer's RAM: 2.00

    First of all, CS4 does not work well with non-production codecs like MP4. Use the Adobe Media Encoder (or something similar) to convert your footage to a production codec (Cineform, DNxHD, Quicktime with the Photo JPEG codec or Quicktime with the PNG codec).
    Second, you're running AE on a system with only 2 GB of RAM? Good heavens, man - no wonder it ran out of memory! Upgrade that to 4 if at all possible. (Upgrade to much more than that if you have a 64-bit OS and plan to upgrade AE ever. Although, on a machine as old and slow as that, you might be better off getting a new machine if you want to do anything serious in AE.)
    Third, what's your exact version number of AE? You should be on 9.0.2 if I recall correctly.
    Fourth, your video shouldn't be looking weird in AE. It's probably misinterpreting the pixel aspect ratio of your footage. Fix the interpretation and you shouldn't have to have a separate comp for changing its size.

  • Cannot load large CSV files in SignalExpress("Not enough memory to complete this operation" error)

    Hi guys,
    I'm new here and just  have browsed
    some of the related topics here regarding my problem but could not seem
    to find anything to help me fix this problem so I decided to post this.
    I currently have a saved waveform from an oscilloscope that is quite
    big in size(around 700MB, CSV file format) and I want to view this on
    my PC using SignalExpress. Unfortunately when I try to load the file
    using "Load/Save Signals -> Load From ASCII", I always get the "Not
    enough memory to complete this operation" error. How can we view and
    analyze large waveform files in SignalExpress? Is there a workaround on
    this? 
    Thanks,
    Louie
    P.S.>I'm very new to Signal Express and haven't modified any settings on it. 

    Hi Louie,
    Are you encountering a read-only message when you tried to save the boot.ini file? If so, you can try this method: right-click on My Computer >> Select "Properties", and go to the "Advanced" tab. Select "Settings", and on the next screen, there is a button called Edit. If you click on Edit you should be able to modify the "/3GB" tag in boot.ini. Are you able to change it in this manner? After reboot, you can reload the file to see if it helps.
    To open a file in SignalExpress, a contiguous chunk of memory is required. If SignalExpress cannot find a contiguous memory chunk that is large enough to hold this file, then an error will be generated. This can happen when fragmentation occurs in memory, and fragmentation (memory management) is managed by Windows, so unfortunately this is a limitation that we have.
    As an alternative, have you looked at NI DIAdem before? It is a software tool that allows users to manage and analyze large volumes of data, and has some unique memory management method that lets it open and work on large amounts of data. There is an evaluation version which is available for download; you can try it out and see if it is suitable for your application. 
    Best regards,
    Victor
    NI ASEAN
    Attachments:
    Clipboard01.jpg ‏181 KB

  • Building an Executable - Not Enough Memory to complete this operation

    I am trying to build an executable from my project, it is quite a large program.  During the build, within the 'initializing build' phase, I get the error message 'not enough memory to complete this operation'.  I have a decent PC running XP and 4GB ram. LabVIEW is using about 1.2GB of ram when the problem occurs.
    This is an application that I've been working on for some time and I have experienced similiar problems before.  To get round it I have added the /3GB switch to the boot.ini file.  However that is no longer working, it complains of a problem loading a dll which seems to have only started happening since moving to LV2012.
    Does anybody have any experience with solving this problem please? It is a bit of a showstopper for me at the moment.
    Thank you,
    Martin

    Hi Martin,
    Adding the 3GB switch is a solution which should still work on your system. 
    I'm a little confused, is the system still complaining about not having enough memory? Or is it just the dll problem?
    And is the error message occuring during the build, or when trying to run the .exe?
    The dll in question is associated with DAQmx. 
    If it is a runtime problem rather than a build problem, it may be that you haven't included the DAQmx driver on the target machine, in which case the answer lies in this document: http://www.ni.com/white-paper/5406/en
    If I've misunderstood, please clarify the exact issue which is currently occuring, and we can continue to troubleshoot.
    Ian S
    Applications Engineer CLD
    National Instruments UK&Ireland

  • Error on running LV application-not enough memory to complete this operation

    Hi,
    Developed an application for multi plot graph.
    The graph is having around 25 plots and and its fetching many records from the database for the pltting purpose.
    This LV application is a module of a VB real time application which is running always on the PC.
    Now when the user tries to plot the graph...some times he is getting an error message as the following
    "not enough memory to complete this operation"
    What are the reasons for such an error message and how do i eliminate this error?

    LabVIEW cannot allocate the memory needed to complete the task at hand.
    Prevent data copies of large datasets.
    Reduce the amount of data in your graphs. (Not all point can be seen as individual points, if the scale is from 0-1000 you can plot 1000 points, but with the scale 0-1000000 you can also have 1000 point instead of 1000000 and see almost no difference.
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • "Not enough memory to complete this operation" with Shared Variable

    I have a sizeable cluster (over a megabyte on disk) that I'd like to send over a shared variable.  When I try to set the data type of the shared variable as the cluster I get the message "Not enough memory to complete this operation" (see attached image) and the LabVIEW dialog goes into its edit-mode state.  Has anyone seen this before?
    Thanks,
    Robert C. Mortensen
    Certified LabVIEW Architect
    Certified LabVIEW Embedded Systems Developer
    Endigit
    Attachments:
    Not enough memory.PNG ‏22 KB

    Duplicate Post.

  • My TCP/IP connection return randomly a "Not enough memory to complete this operation"

    I have a program running a data acquisition loop on a PC. (PIII 700, 128 Meg RAM). This program send all the data reads from the system to a UI in another PC via a TCP/IP connection.
    Everything works fine.. but, sometime, I receive a message "not enough memory to complete this operation". This is ramdom and cannot always be reproduce. I run often days without this problem and he show up 2 or three times the next day.
    The memory usage in the system is constant and the number of handles used is also constant. I am using LV run-time version 5.1.1. I cannot upgrade to 6.X for many reasons.
    Can somebody has any idea of the cause of this message. I only see one message like thi
    s in the previous post and it doesn't looks like been solved.
    Thanks,
    Stephane

    Hi Dave,
    I cannot give you any source for the error message. My homemade error manager give me an error 2 after this message box in my TCP/IP command server in... pointing to a vi where I call only TCP write, TCP read and a encryption decoding (a loop appllying logical operation on all the bytes of the message to generate a magic number.)
    This error, has we discuss in a previous e-mail we exchange can be only a side effect. I don't know. I have not test my program on Win 9X. I don't have any license of the OS in the buiding. Even if than solve the problem, I can trust 9X OS. Probably the same for you if your application is critical.
    I wonder if you can provide the kind of instrumentation you are interacting with. My list is the following:
    VXI card HP 1413, (VISA layer and configuration DLL from HP)
    VXI card HP 1415, (VISA layer and configuration DLL from HP) [disable]
    GPIB/ENET100 (VISA) [diseable]
    PCI Ballard ARINC card (Ballard DLL) [disable]
    ENET connection with the TCP/IP layer... not the socket one.
    I am running from a VXIpc-872 from NI in a NI VXI chassis. I have try to different VXI controller (with different CPU speed) and also with an HP chassis. Same result. [Diseable] mean the code is not called. I run with the minimal system I can support 1 VXI Card and 1 SCP and still the same problem happen.
    Does you, Melissa G and Eric Dalaire (on the other thread) have the same type of hardware?
    If my assumption is good, the AI Continious Scan is probably using DMA? Do they? I also use DMA in my VXI access. Do you use DMA too Dave?
    Stephane

  • 24 GB of RAM but still "not enough memory to complete this operation"

    Hello Everyone
    I have an application running on Windows 7, 24 GB RAM, 64 bit computer. I am using Labview 2011, 32 bit and trying to acquire images from a camera. Although I have 24 GB of RAM but while acquiring, the physical memory usage goes upto 8 GB and after that I receive the "not enough memory to complete this operation" message. Any help on how it can be corrected.
    Thanks
    Chauhan

    Hi,
    We are developing an application with Labview 2011, 32 bit, to accuire images at 100fps. Aplication will run in another computer with more than 8GB of RAM (probably 32GB), without having Labview installed, it will only run the exe file. So our questions are:
    we will found also the 8GB limitation?
    If so, the solution could be to buil the application with LV 2011 64bit?
    aditional information will be apreciated.
    Regards,
    Marc.

  • Aparición pop-up "Not enough memory to complete this operation" con mismo vi en un PC si y en otro no.

    Hola, tengo un problema durante la ejecución de un VI. Cuando ejecuto este VI en mi PC puedo tomar hasta 800.000 muestras sin ningún problema, pero cuando ejecuto el VI en el PC donde tiene que trabajar normalmente aparece el mensaje "Not enough memory to complete this operation". Este mensaje aparece indistintamente cuando por ejemplo ha tomado 14000 muestras como cuando ha tomado 30000. En principio los dos PC tienen similares características, por lo tanto no acabo de entender porque en uno de ellos aparece este problema. Por lo que he leído es por un problema de falta de memoria, pero nose si puede haber otra razón. El VI toma muestras de un adquisidor de datos Agilent y de un enfriador criostatico Haake, va guardando estos datos en varios ficheros y a su vez los grafica en varias gráficas.
    ¿Cuál puede ser la razón por la cual en dos ordenadores, en principio con las mismas caracteristicas, en uno aparece este problema y en otro no?
    ¿Puedo solucionar de alguna forma esto para que pueda trabajar en el PC que actualmente aparece el problema?
    Muchas gracias.

    Não importa quanto de memória o PC possui, mas o quanto ela está fragmentada. Quando você aloca um array na memória a área deve ser contígua e se não for possível ele irá avisar a falta de memória.
    Tente alocar toda a memória que necessita no começo da execução e não redimensionar o array no meio da execução.
    Tente utilizar buffers menores. Se estiver convertendo os dados para texto, como CSV, divida o array em pedaços menores, converta  e escreva em arquivo pedaço a pedaço.
    Espero ajudar.

  • Error "not enough memory to complete this operation"

    Hi, I  develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer​.zip)
     from crio and then displays them on  7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of  measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please.  Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
    Attachments:
    Project fo 2 PC.zip ‏108 KB
    Project for crio.zip ‏114 KB
    Error.JPG ‏14 KB

    Hi Mike,
    Mike23 wrote:
    Hi, I  develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer​.zip)
     from crio and then displays them on  7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of  measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please.  Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
    It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points!  Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
    Cheers!
    "Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Maybe you are looking for