Not enough memory to save file.
I am getting this message when I try and export an AI file as .psd file. Illustrator is the only app open on a new 24" iMac running 10.5.4. The illustrator file itself is only about 5 mb. Yet . . .I get the message "Not enough memory to save file." Any thoughts, gang?
I know this is an old thread, but anyone trying to export large files out of Illustrator CS5 (maybe even CS6 and CC) still face this "not enough memory" challenge.
To summarize the above comments, this is what worked for me...
1. Using Windows 7 or Windows 8, and Illustrator CS5
2. Close Illustrator (if open)
3. Right click the Illustrator application > Properties > Compatibility (tab)
4. "Run this program in compatibility mode for:" > Windows XP (Service Pack 3)
5. "Run this program as an administrator" (optional, but recommended)
6. Apply (or "OK")
7. Open Illustrator > Open your Illustrator file
8. File > Export > (DO NOT CLICK SAVE YET...)
9. (File Save Dialog Box) > At the bottom of the dialog box, tick to select "Use Artboards" > Range "1"
10. (name your file) > "Save"
11. (Photoshop Export Options) > Select color mode > Select Resolution > Select "Flat Image" > Select "Anti-Alias
12. Click "OK"
Doing everything above allowed me to save a very large Illustrator file as a 300ppi RGB Photoshop file and avoid the "Not enough memory..." problem.
I hope this helps, but as usual: your mileage may vary... Shalom!
Similar Messages
-
Exporting from Illustrator to Photoshop: Not Enough Memory To Save File
Exporting from Illustrator to Photoshop: Not Enough Memory To Save File
I have plenty of memory (6 GB) and the files I try to export are not very big (some less than 5 MB). Yet, I keep getting the above message: Not Enough Memory To Save File
Any suggestions?
Many thanks!Up-thread, John Joslin mentioned that "memory" is more than RAM. It is RAM, Virtual Memory, Scratch Disk, and is also governed by the allocations for your Adobe programs (in this case).
The first thing that I would explore is the Windows Virtual Memory (Page File) settings. This ARTICLE might give you some tips.
Also, see this ARTICLE on setting up a computer for an editing session. It's geared more towards doing video editing, but applies to PS work too.
Then, go to Edit>Preferences in both PS and AI, and check the allocation of your memory. Too often, people run that up, and then they starve the OS, or any other programs.
Good luck,
Hunt -
Not enough memory to save this file
hi ,
im doing a artwork with a size of 210" x 72" and 4 layers in total ( the size is actually half of the actual print size which is 420" by 144" ). But whenever i want to export the ai file to psd , the error prompting ' Not enough memory to save this file ' appears. I've changed my primary scratch disks frm Startup to C:\ ( which is ard 100gb ) but the error still exists. Is there anyone who could help me ? Need to send the works for print next week but i need to export this file to photoshop to do extra effects and changes.theres around 88gb left on my drive and my ai file is juz 1.84mb.
the settings for export is as follows :
Resolution - 72dpi ( as my workfile is being done to a scale of 50% , i used a lower dpi )
Options - Write layers with max editability
Anti-alias unchecked
Embed ICC profile checked -
Illustrator CS5 Error - "Not enough memory to save the file"
Hey guys,
I'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".
I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it... any suggestions?
Thanks, Steve.Sad to say I'm running into the same problem with a 40KB file.....
(download the following file and use it)
http://upload.wikimedia.org/wikipedia/commons/8/8c/2.4_GHz_Wi-Fi_channels_%28802.11b%2Cg_W LAN%29.svg
File -> Open
Modify the file slightly:
doubleclick the image
remove the channel 14 info (the text block "14" & "2.484", the T shaped path, the dotted half circle path)
drag a square around the "Channel", "Center Frequency", "(GHz)" text blocks and hold left shift and press the left arrow until the selected items are tighter to the rest of the image
select the bold base line, grab the right middle point to shrink the line (dragging from right to the left) until 'intersect' shows up, then release
click the top left "Back One Level" arrow 2 times so that you are back to the top level (out of isolation mode)
File -> Export -> Choose PSD
Export Options (all default settings)
Color Model RGB
Medium (150ppi)
Write Layers
Preserve Text Editability
Maximum Editability
Antialias
Click OK.....
POOF! ERROR!
"Not enough memory to save the file"
note: saving as .ai file before exporting doesn't solve the problem
My Environment:
Adobe Illustrator 15.0.2
Win7x64 SP1
6GB free RAM (8GB installed)
55GB Free HDD space (256GB total, it's a SSD)
4GB pagefile
Please try the test method provided for yourself and advise, thank you -
Not enough memory to open file NOKIA 6120
Hi !
I have nokia 6120. I have also sandisk micro sd card (mobile premiere) with 1GB storage. I transfered a flash movie of 20Mb and another one of 11Mb into the card memory. I tryed to play it with flash player that is installed on the phone. When i select to play it from the file manager , it gives me a error: not enough memory to open file. On the phone i have 11 Mb of memory ow, but the movie is located on the sd card. I dont know why it gives me this error. I think its mean that i even cant play any of the other videos from the card ... for example a divx or avi movie !???
Anybody have the same problem ? I hope that there is a fix for this otherwise i have a big card that I cant use for such storage.... that will be a big shame.
RegardsI deleted some game and gain 1MB of Ram. Yes its quite low...strange. I need to check some friend phone which have the same type. I think that more stuff installed on phone means less ram memory available, although only some of them are rally active in stand by or none of them...I asked another friend if he have the same problem. I dont know exactly what is the model of his phone, but i now he have a symbian 3rd phone s60...the first one of this s60 3rd generation. He have the same problem when talking about opening the swf videos. I think that the phone try to fill the whole movie into his ram and then play it....so it doesnt work. When opening the avi videos..using smart movie player for symbian...no problems at all. Also using the original real player works ok, but the real player that is integrated does not support avi formats. It support mp4 format and some other. The smart movie player support avi formats, divx, xvid, mp4... I chose smart movie player because it has more functionalities then nokia real player. try it.
More info: http://www.lonelycatgames.com/?app=smartmovieMessage Edited by m4dj on 25-Nov-200709:54 PM
Regards -
CS3: Not enough memory to place file?? (Vista 64 bit) SOLVED!!
For whomever this helps, I fixed my "Not enough memory to place file" problem (running Vista 64 Bit with lots of ram).
After trying everything else (checking cache files, deleting preferences file, uninstalling nearly all fonts, increasing virtual ram on machine, etc.), I solved it by right clicking the launch icon, and then in the compatibility tab checking the "Run this program in compatibility mode for:" box and then choosing the XP OS from the drop down list.
Oddly though, I have a nearly identical Vista 64 bit machine running the same Illustrator CS3 and this has no problems (without the need for this fix).
Add this to your list of things to try.YES! viveredesign is my new hero.
Adobe, your programs drive me nuts some days.
Windows 7 / 64 bit -
"not enough memory to place file" in CS3 - Huh??
Can't seem to find anything about this anywhere. User is trying to place PSD file into an AI document. When he does this, a dialog box pops up asking him which way he wants it placed (as an object or flatten document). When he chooses either option, he gets an error that there isn't enough memory to place the file.
This just started happening out of nowhere. Any ideas?? Can't be the RAM on his Mac, as he has 6GB.Checki the Scratch disk I bet they are using the start up disk and they have good percentage of it loaded with files ad stuff. If it just started happening that is a good indication that they save one too many files to that disk.
Select a different disk with lots of room as the scratch disk and then restart AI. -
'Not enough Memory' to export file to Photoshop
I have a 1.2 MB file done in Illustrator that I can't export to Photoshop. I used a distort filter on the solid background and there are tons of points. Also, the file is 26" by 14". Other than that layer, it's not complex. I have 8GB ram and am using a Mac Pro 2x 3.2GHz. Should this be a problem? Even if I take out the complex layer and delete it, it still won't save.
What resolution are you exporting to? 26˝ × 14˝ at 300 ppi is a pretty big file. 131,040,000 bytes for a one-layer CMYK file. More layers means multiplying that size.
If all else fails, you can copy/paste the Illustrator file into Photoshop as a smart object or just open the Illustrator file in Photoshop. If you need to retain layers, then use the Smart Object option and hide or delete layers as needed for each of several copy/paste repetitions. I suggest adding a surrounding object on a new layer below all other layers for registration.
For a four-layer file, add a fifth layer (we’ll call it “Layer 5”) at the bottom and draw a white rectangle the size of the artboard. Hide all but Layer 4 and Layer 5, select all, Copy, switch to Photoshop, Paste as Smart Object. Back in Illustrator, hide Layer 4, show Layer 3, Select All, etc. Repeat until all is copied over. In Photoshop, all the layers should be aligned, since they are all the same size. You can double-click on the disk icon in the Layers panel to edit each Smart Object in Illustrator and delete or hide Layer 5. Back in Photoshop rasterize all layers. -
Not enough memory to open file
I am unable to open a 1.7 mb file in photoshop 6. I had it opened about 3 weeks ago but made no changes. I downloaded a new copy of the file thinking my version was corrupted but no luck. I am running windows xp, 2.8 ghz celeron and just installed an additional 2gb of ram. Naturally, photoshop is the only program i had running after a restart aside from the minimal startup windows nonsense. Short of buying a mac or the latest version of photoshop, what can I do?
Many thanks for any input.
On a side note, I am able to open a 4.8 mb companion file to the one in question. Both are .psd files.Just for giggles, are you updated to Photoshop 6.0.1?
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
If that does not work, consider trying to open the file in GIMP (http://www.gimp.org) or any other image editing program that supports your image filetype. -
Illustrator show not enough memory to open file,
but the file is only under 200k, my PC config is 16G Win 7, 1TB HD
no, the file is OK, I have test when the PC after restart, illustrator can open it one, but after open the same file, close then reopen the file by illustrator, it fail again, only have open the same file with illustrator, do not have open any program
-
Not enough memory to save AI as PSD - CS4
Win 7 64 8GB , tried anti-aliased on and off, checking "Use Artboards - all and range 1 (only one artboard) when I zoom out there is a lot of checkered area, this file is set to dv widescreen.
I have only found the one thread on this and have tried all.
I am creating a simple line wiring diagram to be used in a DVD, I was advised to export it to Photoshop to render for better clarity on screen.
Any ideas would be appreciated.
Thanks
DennisThanks for the response Russell, I have tried that and I don't see any difference in the quality of a tiff from AI vs Acbt., there is a noticeable difference exporting from AI to Photoshop then to Premiere.
Dennis -
Not enough memory to export? CS4
Hi all
I wanted to export a 7 mg ai to a flattened, RGB 300 dpi .psd and got a 'not enough memory to save file' message. If this were an older machine or the .ai file was huge and the assigned scratch disk small I'd agree, but I'm thinking it must have something to do with a .tif file that was placed in the document.
This is the second time I've ever placed art, so bear with any ignorance, please. The original .tif file is 2.5 mgs and then needed to be reduced considerably and to keep the file size down I chose to link it instead of embedding. Bad idea?
Or is there something else that might cause this problem? Thanks for any advice.
EAFirst I will address the misconception of a 7MB being a small file when you want to export to say tiff or psd at only 300 ppi is actually at 8.5 x 11 inches is 64 MB 20x24 is 164 as 8 bit if it is being exported as cmyk add four layers and with content and it gets much larger. So 7MB is not an accurate way of describing what you are exporting better to give the dimensions and number of layers and complexity of the part does it have for instance paths with lots of points does it use a lot of symbols.
Also do you have a scratch disk other than the startup disk, does it have a lot of free space, is it fragmented?
What about your hardware, system and plug ins? -
"Could not complete the Save As command because there is not enough memory (RAM)"
I'm trying to save a file and an error keeps popping up saying ""Could not complete the Save As command because there is not enough memory (RAM)". I'm using Adobe Photoshop CS5 Extended. I have no other windows open. I checked the RAM allocated to Photoshop, in the Preferences > Performance tab, and I have tried it at 60% (980 MB) and 90% (1483 MB), still with no luck. I tried Purging the undo, clipboard and history with no help either.
I read a couple of other posts that were similar to this and people suggested " resetting the preferences as described in the FAQ." but is there any way to do this without closing Photoshop?
I can't loose this file, so any help woudl be appreciated.I'm sorry to hear it locked up on you, and with only a GIF saved (which is probably useless). Perhaps I should have suggested Select All / Copy first.
As far as what went wrong... It might be helpful to know some of the specifics:
What operating system are you running?
Do you see any errors in the Windows error logs corresponding in time to this problem, and if so, what are the specifics?
Do you have Photoshop updated to 12.0.3?
What video card do you have, and do you have updated video drivers?
Is OpenGL enabled in Edit - Preferences - Performance?
What kinds of operations did you do since you started the session of Photoshop that ultimately went bad?
What other applications were you running?
What kind of computer is it (specifically, can you install more RAM)?
It might not be possible to pinpoint just what went wrong, but perhaps we could make some general suggestions that might help.
-Noel -
Photoshop error: could not complete the save command because there is not enough memory
This happens occasionally and it makes me crazy, causing me to lose hours of work! I have lots of ram remaining. I have no plugins installed, windows 8. Please see below for system information:
================
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 16304 MB
Free memory: 12478 MB
Memory available to Photoshop: 14591 MB
Memory used by Photoshop: 90 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Middle Eastern and South Asian
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1200, right=3840
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 765M/PCIe/SSE2"
gpu[0].RendererID=4577
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.2723"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20130912000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="4.2.1"
gpu[0].OCLBandwidth=4.89598e+010
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.30 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number: 90970903167992058536
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Tevi\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 476.9G, 364.2G free
D:\, 931.5G, 396.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/10/29-11:47:16 79.548223 79.548223
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/10/25-12:15:59 5.0.24 79.547804
AdobePDFL.dll PDFL 2013/10/29-11:47:16 79.508720 79.508720
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPFiles.dll Adobe XMP Files 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPScript.dll Adobe XMP Script 2013/10/29-11:47:16 79.154911 79.154911
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/10/29-11:47:16 79.548223 79.548223
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50) 1.000000
ARE.dll ARE 2013/10/29-11:47:16 79.548223 79.548223
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/10/29-11:47:16 79.548223 79.548223
BIBUtils.dll BIBUtils 2013/10/29-11:47:16 79.548223 79.548223
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/10/29-11:47:16 79.548223 79.548223
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/10/30-13:12:12 79.546835 79.546835
FileInfo.dll Adobe XMP FileInfo 2013/10/25-03:51:33 79.154511 79.154511
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2013/10/29-11:47:16 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/10/29-11:47:16 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/10/29-11:47:16 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.2.0.36
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/10/30-13:12:12 79.546835 79.546835
ScriptUIFlex.dll ScriptUIFlex 2013/10/30-13:12:12 79.546835 79.546835
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.2.1 (14.2.1 x001)
Accented Edges 14.2.1
Adaptive Wide Angle 14.2.1
Angled Strokes 14.2.1
Average 14.2.1 (14.2.1 x001)
Bas Relief 14.2.1
BMP 14.2.1
Camera Raw 8.3
Camera Raw Filter 8.3
Chalk & Charcoal 14.2.1
Charcoal 14.2.1
Chrome 14.2.1
Cineon 14.2.1 (14.2.1 x001)
Clouds 14.2.1 (14.2.1 x001)
Collada 14.2.1 (14.2.1 x001)
Color Halftone 14.2.1
Colored Pencil 14.2.1
CompuServe GIF 14.2.1
Conté Crayon 14.2.1
Craquelure 14.2.1
Crop and Straighten Photos 14.2.1 (14.2.1 x001)
Crop and Straighten Photos Filter 14.2.1
Crosshatch 14.2.1
Crystallize 14.2.1
Cutout 14.2.1
Dark Strokes 14.2.1
De-Interlace 14.2.1
Dicom 14.2.1
Difference Clouds 14.2.1 (14.2.1 x001)
Diffuse Glow 14.2.1
Displace 14.2.1
Dry Brush 14.2.1
Eazel Acquire 14.2.1 (14.2.1 x001)
Embed Watermark 4.0
Entropy 14.2.1 (14.2.1 x001)
Extrude 14.2.1
FastCore Routines 14.2.1 (14.2.1 x001)
Fibers 14.2.1
Film Grain 14.2.1
Filter Gallery 14.2.1
Flash 3D 14.2.1 (14.2.1 x001)
Fresco 14.2.1
Glass 14.2.1
Glowing Edges 14.2.1
Google Earth 4 14.2.1 (14.2.1 x001)
Grain 14.2.1
Graphic Pen 14.2.1
Halftone Pattern 14.2.1
HDRMergeUI 14.2.1
IFF Format 14.2.1
Ink Outlines 14.2.1
JPEG 2000 14.2.1
Kurtosis 14.2.1 (14.2.1 x001)
Lens Blur 14.2.1
Lens Correction 14.2.1
Lens Flare 14.2.1
Liquify 14.2.1
Matlab Operation 14.2.1 (14.2.1 x001)
Maximum 14.2.1 (14.2.1 x001)
Mean 14.2.1 (14.2.1 x001)
Measurement Core 14.2.1 (14.2.1 x001)
Median 14.2.1 (14.2.1 x001)
Mezzotint 14.2.1
Minimum 14.2.1 (14.2.1 x001)
MMXCore Routines 14.2.1 (14.2.1 x001)
Mosaic Tiles 14.2.1
Multiprocessor Support 14.2.1 (14.2.1 x001)
Neon Glow 14.2.1
Note Paper 14.2.1
NTSC Colors 14.2.1 (14.2.1 x001)
Ocean Ripple 14.2.1
Oil Paint 14.2.1
OpenEXR 14.2.1
Paint Daubs 14.2.1
Palette Knife 14.2.1
Patchwork 14.2.1
Paths to Illustrator 14.2.1
PCX 14.2.1 (14.2.1 x001)
Photocopy 14.2.1
Photoshop 3D Engine 14.2.1 (14.2.1 x001)
Photoshop Touch 14.0
Picture Package Filter 14.2.1 (14.2.1 x001)
Pinch 14.2.1
Pixar 14.2.1 (14.2.1 x001)
Plaster 14.2.1
Plastic Wrap 14.2.1
PNG 14.2.1
Pointillize 14.2.1
Polar Coordinates 14.2.1
Portable Bit Map 14.2.1 (14.2.1 x001)
Poster Edges 14.2.1
Radial Blur 14.2.1
Radiance 14.2.1 (14.2.1 x001)
Range 14.2.1 (14.2.1 x001)
Read Watermark 4.0
Reticulation 14.2.1
Ripple 14.2.1
Rough Pastels 14.2.1
Save for Web 14.2.1
ScriptingSupport 14.2.1
Shake Reduction 14.2.1
Shear 14.2.1
Skewness 14.2.1 (14.2.1 x001)
Smart Blur 14.2.1
Smudge Stick 14.2.1
Solarize 14.2.1 (14.2.1 x001)
Spatter 14.2.1
Spherize 14.2.1
Sponge 14.2.1
Sprayed Strokes 14.2.1
Stained Glass 14.2.1
Stamp 14.2.1
Standard Deviation 14.2.1 (14.2.1 x001)
STL 14.2.1 (14.2.1 x001)
Sumi-e 14.2.1
Summation 14.2.1 (14.2.1 x001)
Targa 14.2.1
Texturizer 14.2.1
Tiles 14.2.1
Torn Edges 14.2.1
Twirl 14.2.1
Underpainting 14.2.1
Vanishing Point 14.2.1
Variance 14.2.1 (14.2.1 x001)
Variations 14.2.1 (14.2.1 x001)
Water Paper 14.2.1
Watercolor 14.2.1
Wave 14.2.1
Wavefront|OBJ 14.2.1 (14.2.1 x001)
WIA Support 14.2.1 (14.2.1 x001)
Wind 14.2.1
Wireless Bitmap 14.2.1 (14.2.1 x001)
ZigZag 14.2.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Adobe Exchange
Kuler
Installed TWAIN devices: NONEI've also purged undo and history, and still no luck. I tried doing Save as... and attempted to duplicate layers to a new file, and even tryied to "convert to smart object", but everything I try throws the not enough memory error.
My system shows me using 3.7G/15.9G
12.2 available
6.3G/35.5G committed
I also have 2 very large scratch disks available (with hundreds of available gigs), including a very fast SSD, and standard 7200 disk. -
Message "Could not save because there is not enough memory (RAM)"
Running Mac OS9.2.2 Suddenly start to get and error message " An error occured saving the enclosure "file name" Not enough memory" when trying to save an attachment in Microsoft Outlook. Same thing with Adobe Photoshop - when trying to save an any new file - message "Could not save because there is not enough memory (RAM)".
Already Tried:
During several freezes, suddenly my mac stop recognize any extensions. When used Microsoft Outlook and tried download an attachment got an error message type 3. So I create a new set in extensions manager and get ride of Type 3 error, but get a new error message "Not enough memory" when try to save an attachment, or "Not enough RAM" - when try to save an EPS file in Adobe Photoshop.
In Outlook ("Get Info" section)changed memory size:
Suggested Size: 7168 K
Minimum Size: 16000 K
Preferred Size: 16000 K
In all mailboxes - there are not that many messages and they are not heavy at all, I checked them all before. And I rebuilt/compressed Outlook database - holding Option while restarted Outlook...
Adobe Photoshop - started acting weird at same time. Even if I want to open a file through the menu: File - Open - it gives me the same message.
Who has any clue - please help!!!Hi, Mike -
I have Outlook Express's Preferred memory allocation set to 45000K, and don't have any problems with attachments. Don't be afraid of increasing OE's Preferred memory allocation (nor IE's, either - I have that set to 65000K).
How large is the Messages file used by the account you're using in Outlook? You can examine that file here - (hard drive) >> Documents >> Microsoft User Data >> Identities >> (account folder, either the default "Main Identity" or one you've created) >> Messages.
It seems that the Messages file grows with each email received; but does not shrink when an email is deleted. Over time, especially when lots of attachments are involved, that file can get huge.
One way to help it not get too big is to -
• delete attachments after copying them to the desktop. In case you're not familiar with the easy way to copy an attachment to the desktop - select the email so it opens; click the small triangle next to the legend "Attachments" between the upper pane and the lower pane in Outlook's main window; drag the attachment from the list out onto the desktop. It will be extracted and copied to that location. Once that has been done you can delete the attachment from the email with which it arrived.
• after purging your emails of unneeded emails and attachments, compact the file. To do that, quit Outlook if it is running. Then hold down the Option key and start up Outlook. A splash screen will appear asking if you want to compact its database files - click yes. Follow the prompts.
Compacting OE's database can also fix some instances of a damaged database that can't be used.
If you could answer a few more questins, perhaps we can offer additional suggestions -
1) How much RAM do you have installed? That means the physical RAM, not counting Virtual Memory in use, if any.
2) How full is your hard drive - how big is it, how much free space is left unused?
3) When was the last time you rebuilt the desktop file?
Maybe you are looking for
-
Obtaining the " #text " string in a nodeList !!!!
hello guys, i just have a bizarre problem, i'm getting the #text string in a nodeList whereas this string does not exist in any of the .xml files. here is my function: private Vector<String> getClassAttributs(Document doc) String nN=""; N
-
How can I get a dual layer DVD+R to burn properly?
I can not get a dual layer DVD+R to burn properly. The disk pops out before it's finished, usually at the end of the multiplexing stage. iDVD seems to think the disk is still burning for about 20 more minutes although the box says "done". I tried i
-
Floating objects drop during review
Im layering images using this technique: <style type="text/css"> <!-- #box {border:1px solid; width:500px; height:600px;position:relative;} #topimage {position:absolute; top:50px; left:50px; z:index:10;} #bottomimage {position:absolute; top:0; left
-
okey i have tried calling apple support no one will help me i stayed on the phone waiting an HOUR!! i tried turning my phone off and restarting it.. deleting pictures!! everything!!
-
How to disable Specific Enterprise Features
Hi experts, I am trying to work on a script that will disable the 9 EE specific features as outlined in the following link: http://www.oracle.com/technetwork/middleware/bi-foundation/obi-se1-11g-wp-187262.pdf Although this link shows you how to disab