Not getting any output when running the Webservice through Xacute
hai all,
I am using a transaction as web service to be called in another transaction in the same server. I can see the output of the web service in the tracer, when I execute it in the BLS. But if I run the same transaction via xacute query I am not getting any output. I had read in one of the threads that reference document has to be assigned. I tried doing that also, but no luck. Can somebody pls. throw some light on how to use reference document & whether it is required in my case?
Thanks,
vidhya
Hai Rick,
thanks for the hint i have used document and row actions now iam gettting output through xacute...
thanks,
vidhya.
Similar Messages
-
My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.
Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.
-
Im not getting any sound when i select a track and put it in the arrange area
Im new to pro logic,, when i select a track and put it in the arrange area,, im not getting any sound when it plays.. I can hear it play in the list of samples, but not when its in the arrange area,,, help meeeeee
Are you putting the file on an instrument channel rather than an audio channel? That's one possibility. The track could be muted is another.
-
not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi
Solution may be found if you search in the "More Like This" section over in the right column.
-
I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?
1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg -
my ipad2 is asking old id password, when i go to forget password link for that id then I am not getting any mail to reset the same. Please help how can i remove or change the old id.
You cannot remove or change the old ID. This is Find My iPhone Activation Lock. You need to recover the credentials for the Apple ID originally used to activate the iPad.
Check your spam and junk folders. -
"could not get an output file for the document (error RWI 00314)"
Hi
We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
Can some one please suggest any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
Thank's for your helpHi Sreeram,
Earlier i also faced same kind of problem.
To solve this kind of problems you need to shutdown the server.
second thing is when patches missed that time also you will get this kind of problem.
check j2ee connection is it properly working or not?
Regards,
samar reddy. -
I'm not getting any sound when i play a video; HP pavilion dv7 Windows 7
I'm not getting any audio when I try to play a video, such as youtube; I have an HP pavilion dv7....op sys is Windows 7; Funny thing is that when my brother signs in under his User ID, he gets audio, but I don't when I'm the user. I've checked all of the on/off audio mute buttons that I know of.
what can you suggest?Is it just sites like YouTube? Can you play music files-mp3/cd ,hear Windows system sounds,etc?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
I'm not getting proper output as per the Program
Hi Experts,
As i'm executing my ALV report regarding Customer Invoice on Production client I'm not getting proper output as per the program but when i execute the same report on Development client i'm getting proper output.
Can anybody tell me how can i resolve this problem on production client?
Actually i've updated my report on my old report but still i'm getting old output of my report on production client, Program is showing updated code but at execution i'm getting old output.FORM Z_CREATE_FIELD_CATALOG.
I_FCAT-FIELDNAME = 'BUKRS'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '00006'.
I_FCAT-SELTEXT_L = 'Comp.Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'BELNR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Document No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'KUNNR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Customer Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'NAME'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Customer Name'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'GJAHR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000005'.
I_FCAT-SELTEXT_L = 'Fscl.Yr'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'KOSTL'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000008'.
I_FCAT-SELTEXT_L = 'Cost Center'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'XBLNR'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000016'.
I_FCAT-SELTEXT_L = 'Invoice No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'SGTXT'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Item Text'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'BUDAT'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Posting Date'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'MWSKZ'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '0000010'.
I_FCAT-SELTEXT_L = 'Tax Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'TAXTXT'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '0000015'.
I_FCAT-SELTEXT_L = 'Tax Description'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'G/L Account'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Net Amount'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT2'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Tax G/L No.'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR2'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Tax Amount'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT1'.
I_FCAT-HOTSPOT = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Freight G/L No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR1'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Freight Amount'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'GROSS'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Gross Amount'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-cfieldname = 'PSWSL'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'PSWSL'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-OUTPUTLEN = '000004'.
I_FCAT-SELTEXT_L = 'Curr.'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
LS_SORT-UP = 'X'.
LS_SORT-FIELDNAME = 'BELNR'.
APPEND LS_SORT TO I_SORT.
CLEAR LS_SORT.
LAYOUT-ZEBRA = 'X'.
ENDFORM. -
After ios5 update, I am not getting any sound when I play music.
After ios5 update, I am not getting any sound when I play music (iphone speakers or headphones). I get sound from games, previewing songs in iTunes, etc. Any idea why? I've resynced and shut down my phone and that didnt help.
iPhone 4Beer,
is that when you want to play music over the air (airplay) like BT headset or something?
because i am facing the below issue in my car.
the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls. -
I am not getting any notifications when I use my card
I'm not getting any notifications when I make purchases with my primary card
Select the card under Settings > Passbook & Apple Pay and ensure that Card Notifications is on. This option is not present for Debit Cards.
-
I am trying to reset my password for apple id. I entered my d.o.b. tells me info doesn't match. I tried reseting through email but am not
getting any emails to reset it. HELP!Go to the Apple ID Security site from http://support.apple.com/kb/HT5699 or call the AppleCare support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team...either can help you reset your questions/answers.
-
Hi
Creating an application to analyze .dmp files - all working well except this odd issue
If I open command prompt and enter this command:-
kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
Then it works and shows me all the output I need (shown at bottom of post)
If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
Dim myprocess As New Process()
myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
myprocess.StartInfo.UseShellExecute = False
myprocess.StartInfo.RedirectStandardOutput = True
myprocess.StartInfo.CreateNoWindow = True
myprocess.Start()
TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
Output when run from cmd prompt:-
C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
1: kd> kd: Reading initial command '!analyze -v;q'
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: afa99150, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
MODULE_NAME: mfehidk
FAULTING_MODULE: 82e3e000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
GetPointerFromAddress: unable to read from 00000000
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
afa99150
FAULTING_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
STACK_COMMAND: kb
FOLLOWUP_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: mfehidk+377d7
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: mfehidk.sys
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwner
quit:
output when run in my app:-
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
Darren RoseTry it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process. If you notice there is a "-C" before the Filename and Arguments in this example. The "-C"
tells the cmd to execute the commands and then close itself. You can also use a "-K" which tells the cmd to execute the commands and keep itself open. Being you are not showing the cmd window you don`t want to keep it opened because the
user can`t close it so, that is why i used "-C".
I don`t have the program so, you can just experiment to see what it does. Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
Dim p As New Process
With p.StartInfo
.FileName = "cmd.exe"
.Arguments = "-c " & filepath & args
.UseShellExecute = False
.CreateNoWindow = True
.RedirectStandardOutput = True
End With
p.Start()
TextBox1.Text = p.StandardOutput.ReadToEnd
End Sub
If you say it can`t be done then i`ll try it -
I have a new iphone5. I have it poweredoff and plugged into the wall, but I am not getting any charging icon. Any ideas?.. Bill Steed
You will not get anything on the screen as your iphone is powered off.
Ideas for what? -
Not getting any signal out from the NI9472 cRIO
I want to generate PWM signal from the NI9472 in cRIO.
I made a vi which (I think) should generate the pulse in the DO0 port.
but when I measure DO0 with oscilloscope, I get nothing out from it. (The LED comes up in NI9472 that channel 0 is active)
Is there anything I am doing wrong here? (I attached the project and block diagram in jpg)
Thank you so much.
Attachments:
PWM.zip 100 KB
121.jpg 54 KBHi hinewwiner,
Overall, your implementation looks good. I think it might be worth your while
to look at two other examples of PWM I found on our website which may be more
efficient and more accurate. Another important thing to not about the 9472 is
that it must have an external power supply connected to it for any output to occur.
If you do not have any supply, the channel may be switching (and thus the
channel LED will show activity,) but you will not see any change in output
voltage. Also note that the LED should be off when the channel is not switched,
and on when it is switched. So if you run your PWM at a slow enough speed, you
will see the light turn on when the pulse is high and off when the pulse is low
(at the rates shown in your attached project, your eye will probably not be
able to discern a change.) It may also be helpful for you to describe exactly
what the LED is doing to get a better idea of whether the code has stopped in a
channel closed position, or if it is simply changing very fast.
Another slight possibility is that the unit has experienced an over current
condition. Because the module has automatic over current protection, if it is
exposed to a current greater then 13A, the unit will open the channel switch
and wait for a reset. This may have occurred, and the activity light will still
show normal operation. To ensure that this condition is removed, simply reset
the channel, or disconnect and reconnect the external power supply.
For testing purposes, it may also make sense to simplify your VI by removing
the case structure, start button, stop button and outside while loop. You can
then simply start the VI in your real time controller, and stop the VI using
the abort command given in your real time code.
Here are two great resources for creating PWM functions in FPGA.
Developing a PWM Interface using LabVIEW FPGA
Pulse Width Modulation Example DAQ Personality
Sincerely,
Asa Kirby
Applications Engineer
National Instruments
Message Edited by Asa_K on 05-20-2008 12:22 PM
Asa Kirby
CompactRIO Product Marketing Manager
Sail Fast!
Maybe you are looking for
-
When logging on to my apps on my I phone 3 when I try to download an app an it sends me to my credit card info and it is all stored. And has been but now it keeps telling me my cvv# on back of my card is wrong! I of course know it is not wrong but it
-
Formatting the Multi-Valued Parameter Selection in report builder 3.0
Hi All, I have a field from a data set and i assigned it to a parameter that selects multiple values. But i want to format(i need only substring of that field value) the data set field value for the user to select those values. I build a report datas
-
Hi I just turned on my computer and i got a message saying "cooling fan not operating properly, computer will shut down in 15 sec-don not recommend using computer it can damange files or corupt harddrive. Do i just have another cooling fan installed
-
I have video clips from a digital camera that I'm trying to put into a movie in imovie. When it opens in quicktime it has sound and runs fine but when I import it into imovie it runs but with no sound. Do I have to export it as a different file? Any
-
When I insert a music CD, it will not play and ejects the CD. On system preferences, I choose the option to open iTunes when a music CD is inserted, but it changes itself to "ignore".. In iTunes, on my preferences, I selected to begin playing when a