'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Similar Messages

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Re: Column is not getting displayed in the BI report

Hello Gurus,
I have developed a BI report with more number of parameters.
Case 1:
When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
Case 2
I tried to put the blank column as parameter, The Program works with out displaying that column data.
I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
I have checked the code, Parameter description, length, Template and data definition.
Please help.
Thanks,
Sreekanth

Hi ,
For that column did u changed any alias name in the query...
check ur template once by loading the xml data...
check that column form field that matches with the xml tag or not..
Thanks,
Ananth

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

SAP Fields not getting displayed on the BDT screen

Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
Shiva

Hi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Footer Not Getting Displayed IN OO ALV

HI Experts,
I am using OO ALV and wish to display a footer for it.
but the footer is not getting displayed.

Footer for each page means you should use the EVENT END_OF_PAGE this will trigger , but not in display, but when you print the report it will work.
Footer at the end_of report then you have to use END_OF_LIST event.
BCALV_TEST_LIST_EVENTS
check the above program to test the events.

How to get header in the ALV report

Hi
I want to print header in the ALV report.But i am not getting that.Plz see my program it is getting error and also not printing header.If there is any error means plz give me the solution.In this program there is an error.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: heading        TYPE slis_t_listheader,
      wa_header      TYPE slis_listheader,
     events         TYPE slis_t_event.
data: l_string type c.
data: ivariant(1) type c,
      itvariant like disvariant,
      w_variant like disvariant.
initialization.
REPORT_ID = SY-REPID.
PERFORM pgm. "F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
*PERFORM init.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
   DEFINE ls_fieldcat.
   add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname    = &1.
    ls_fieldcat-outputlen    = &2.
    ls_fieldcat-seltext_l    = &3.
     ls_fieldcat-emphasize = &4.
    append ls_fieldcat to lt_fieldcat1.
    clear ls_fieldcat.
END-OF-DEFINITION.
    ls_fieldcat 'VBELN'           '10'     'Sales Order Number'.
   ls_fieldcat 'POSNR'           '6'        'SO Item'.
    ls_fieldcat 'MATNR'           '13'      'Material No'.
m_fieldcat1 'NETWR'           '13'        'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
I_CALLBACK_PROGRAM                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
   IS_LAYOUT                         = I_LAYOUT
   IT_FIELDCAT                       = lt_fieldcat1
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =   ITVARIANT
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
   I_SAVE              = ivariant
CHANGING
   CS_VARIANT          = itvariant
EXCEPTIONS
WRONG_INPUT         = 1
NOT_FOUND           = 2
PROGRAM_ERROR       = 3
OTHERS              = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM pgm. "F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.
*regarding logo and header,,,,
*first store the logo in T-code OAOR, then call that in your report.....
*data: heading        TYPE slis_t_listheader,
     wa_header      TYPE slis_listheader,
    events         TYPE slis_t_event.
To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading.                              " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,'dbcnt' TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
     i_logo             = 'ENJOYSAP_LOGO'
      it_list_commentary = heading.
CLEAR heading.
ENDFORM.                    "top_of_page
*to execute top-of-page you have to create events.
*for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
                         INTO ls_event.
IF sy-subrc = 0.
    MOVE formname_top_of_page TO ls_event-form.
    APPEND ls_event TO p_events.
ENDIF.
ENDFORM.                    " create_event

Hi,
   Find below code for your question, you may get some idea,,
*& Report ZACTIONGRIDPRACTICE
REPORT ZACTIONGRIDPRACTICE.
*data declarations.....
TYPE-POOLS SLIS.
TABLES : T529T ,PA0000.
data : gd_repid type sy-repid.
DATA : LD_COLOR(10) TYPE N.
DATA : GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV.
Data: is_fieldcat TYPE slis_fieldcat_alv.
DATA : GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : GD_DATUM TYPE DATUM.
DATA : BEGIN OF WA_TABLE,
                MASSN TYPE T529T-MASSN,
                MNTXT TYPE T529T-MNTXT,
                userg type userg,
                TOTAL TYPE I ,
                begda type begda,
                endda type endda,
                april type i,
                SLNO TYPE I,
                  LINE_COLOR(4) TYPE C,
                END OF WA_TABLE,
                IT_TABLE LIKE TABLE OF WA_TABLE.
data : april type i.
DATA : TEMP TYPE C.
data :    LT_PA0000 TYPE TABLE OF PA0000,
          LT_PA0000_T typE TABLE OF PA0000 with header line.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
        WA_FCAT LIKE LINE OF IT_FCAT.
DATA : IT_EVENTS TYPE SLIS_T_EVENT,
        WA_EVENTS LIKE LINE OF IT_EVENTS.
        wa_events-form = 'HEADER'.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
APPEND WA_EVENTS TO IT_EVENTS.
PERFORM HEADER.
DATA : SLNO TYPE I.
DATA : lv_output      TYPE dats.
CALL FUNCTION 'ZHR_RE_BE_CALC_START_DATE'
EXPORTING
    id_daberi   = sy-datum
IMPORTING
    ed_date_cor = lv_output.
select-options...
selection-screen BEGIN OF BLOCK B WITH FRAME TITLE TEXT-003.
select-options : s_date for sy-datum OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B.
lv_output = sy-datum - 27.
INITIALIZATION.
S_DATE-LOW = lv_output.
S_DATE-HIGH = SY-DATUM.
S_DATE-SIGN = 'I'.
S_DATE-OPTION = 'BT'.
APPEND s_date.
*AT SELECTION-SCREEN ON S_DATE.
*SELECT MASSN INTO TABLE IT_TABLE FROM PA0000 WHERE BEGDA IN S_DATE.
*SELECT STATEMENTS....
start-of-selection.
SELECT   t529t~MASSN t529t~MNTXT INTO TABLE IT_table FROM T529T where SPRSL EQ 'E' and t529t~massn in ('10','13','16','20','28','30','45','01','03') .
DATUM IN S_DATE.
PERFORM LAYOUT.
loop at it_table into wa_table.
LD_COLOR = 2.
LD_COLOR = LD_COLOR + 1.
if LD_COLOR = 8.
LD_COLOR = 1.
endif.
concatenate 'C' '1' '11' into wa_table-LINE_COLOR . "='C410'.
modify it_table from wa_table.
endloop.
LOOP AT IT_TABLE INTO WA_TABLE." = 'C410'.
select massn from pa0000 into table lt_pa0000 where begda in s_date and massn = wa_table-massn.
*write : / sy-dbcnt. gt s_date-low and endda lt s_date-high
*DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
move sy-dbcnt to wa_table-total.
READ TABLE lt_pa0000 INTO LT_PA0000_T WITH KEY MASSN = wa_TABLE-MASSN BINARY SEARCH.
DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
MOVE LV_LINES to wa_TABLE-TOTAL.
MODIFY IT_TABLE FROM WA_TABLE.
MOVE SY-TABIX TO WA_TABLE-SLNO.
MODIFY IT_TABLE FROM WA_TABLE.
REFRESH : LT_PA0000_t.
CLEAR : LV_LINES.
ENDLOOP.
loop at it_table into wa_table.
SELECT MASSN FROM PA0000 INTO TABLE lt_pa0000 where begda between '01.02.2008' and '20.02.2008'.
MOVE SY-DBCNT TO   WA_TABLE-APRIL.
MODIFY IT_TABLE FROM WA_TABLE.
*endloop.
*PERFORM STATEMENTS...
PERFORM FCAT USING '1' 'MASSN' 'ACTIONCODE'.
PERFORM FCAT USING '2' 'MNTXT' 'ACTION TYPE'.
PERFORM fcat USING '3' 'TOTAL' 'TOTAL'.
DEFINE m_fieldcat.
    is_fieldcat-fieldname = &1.
    is_fieldcat-hotspot = &2.
    is_fieldcat-seltext_m = &3.
    is_fieldcat-col_pos = &4.
    is_fieldcat-outputlen = &5.
    is_fieldcat-hotspot = &6.
    append is_fieldcat to it_fcat.
    clear is_fieldcat.
END-OF-DEFINITION.
   m_fieldcat 'SLNO' '' Text-012 '1' '17' ''.
m_fieldcat 'MASSN' '' Text-010 '2' '40' ''.
m_fieldcat 'MNTXT' '' Text-009 '3' '50' '' .
m_fieldcat 'TOTAL' '' Text-011 '4' '10' 'X'.
m_fieldcat 'april' '' Text-013 '5' '10' 'X'.
*FOR DISPLAYING THE RECORDS...
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = gd_repid
IS_LAYOUT = GD_LAYOUT
I_CALLBACK_USER_COMMAND           = ' '
   I_GRID_TITLE                      = 'REPORT'
   IS_LAYOUT                         = gd_LAYOUT
   IT_FIELDCAT                       = IT_FCAT
   I_SAVE                            = 'X'
   IT_EVENTS                         = IT_EVENTS
TABLES
    T_OUTTAB                          = IT_TABLE.
**&      Form FCAT
*FORM FCAT USING   FP_COL_POS
                 FP_FIELDNAME
                 FP_SELTEXT_M.
WA_FCAT-COL_POS = FP_COL_POS.
WA_FCAT-FIELDNAME = FP_FIELDNAME.
wa_fcat-seltext_m = fp_seltext_m.
APPEND WA_FCAT TO IT_FCAT.
ENDFORM.
*&      Form HEADER
      text
--> p1        text
<-- p2        text
form header .
DATA : IT_HEADER TYPE SLIS_T_LISTHEADER,
        WA_HEADER LIKE LINE OF it_header.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'ACTION TYPE REPORT'.
APPEND WA_HEADER TO IT_HEADER.
wa_header-typ = 'S'.
wa_header-key = Text-022.
CONCATENATE s_date-low+6(2) '.'
               s_date-low+4(2) '.'
               s_date-low(4)
               temp
               '.     TO      .'
               s_date-high+6(2) '.'
               s_date-high+4(2) '.'
               s_date-high(4)
               INTO wa_header-info SEPARATED BY space.
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = IT_HEADER
      I_LOGO             = 'HRRU_51050061'.
*select single bstkd into CORRESPONDING FIELDS OF gt_vbkd
*from vbkd where vbeln = rt_outtab-vgbel
*and posnr = '000000'.
*rt_outtab-bstkd = gt_vbkd-bstkd.
ENDFORM.                    " HEADER
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
GD_LAYOUT-NO_INPUT = ''.
gd_layout-colwidth_optimize = ''.
gd_layout-totals_text = 'TOTALS'(201).
gd_layout-info_fieldname =      'LINE_COLOR'.
ENDFORM.                    " LAYOUT

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Comas(,) are not getting displayed in the output while using OO ABAP

Hi All,
I am using ABAP objects to display the ALV report in which there is a requirement to output Quantity fields. The Quantity fields are getting displayed without comas ','. Please help me in getting back the comas in the output.
Eg:
Below logic is used in my program.
Class name: cl_salv_form_layout_grid
Code:
obj_footer->create_text(
        row    = v_row_cnt
        column = v_col_cnt
        text   = Quantity).
Expected output:
39,545.000
Current Output:
39545.000
Thanks in advance for your help.
Thanks & Regards,
Siva.

Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

'@' not getting displayed in the ALV report

Similar Messages

Maybe you are looking for