Not getting Selection(Prompt) option for the WebI Query.
Hello Experts,
I built WebI query for the custom query of SAP BI.I am not getting an selection or prompt for the WebI Query even though there is a selection in BI Query.If i develop WebI report for the standard query of the Bex i am getting selction options.
Please suggest how can i do this.
Thanks in Advance,
Shiva Kumar G.C
Hi Shiva,
Where in the Query Designer are the selections defined?
Selections defined under Characteristic Restrictions should show up when you run the webi report.
Additional selections created under Default Values won't show running a webi report (that is just an additional filter on the data retrieved from the data warehouse).
Regards,
Harry
Similar Messages
-
"could not get an output file for the document (error RWI 00314)"
Hi
We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
Can some one please suggest any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
Thank's for your helpHi Sreeram,
Earlier i also faced same kind of problem.
To solve this kind of problems you need to shutdown the server.
second thing is when patches missed that time also you will get this kind of problem.
check j2ee connection is it properly working or not?
Regards,
samar reddy. -
Getting best possible look for the web!
I am using Compressor for compressing my footage for the web. When I export out of FCP my footage looks nice and crystal clear however when I compress the footage then upload to the net its not as nice looking as it was. Now I recently bought a Compressor DVD Tutorial by Ripple Training Series. I pretty much knew just about everything on that DVD. I did try some suggestive settings that have made somewhat of a difference but its not crystal clear like many videos I see uploaded to DVXuser. The settings below might be okay it might just be the hosting site I have my videos on. Currently I am using www.sharkle.com
Here are some settings I use:
Compression Type - Sorenson Video 3
Frame Rate 15
Key Frame Every 75 frames
Quality - Medium
Restrict Data to 400kbps (this is for DSL modems) around 1500 for cable modems
Audio
Q Design Music 2
Channels = Stereo
Sample Rate = 48k
Streaming = Fast Start
Geometry
320x240
If anyone sees anything that I should change or try out differently please let me know. Again I am using Compressor and can also compress using Quicktime as well.
Here is a link to the latest video I completed for the web:
http://www.sharkle.com/video/78755/
I am not sure if SHARKLE is recompressing the footage. If it is then thats why its not as good of quality.Their making a FLV file from your sent in video.
Push your video back up to a high quality movie and send that in to them.
What you have sent in has all been squeezed highly with compression. Then they take and further compress it in the FLV format. Double compressing...not good. -
I have used keynote to create a banner with transitions.
It plays OK on the web but doesn't play on the iphone or Ipad, unless i hit the control panel.
I configured it for loop and self playing and that works fine in Chrome and Safari with no control panel visible.
What can I do to resolve the problem and get it to work on iphone and ipad?This is the Mac discussion, I believe you need the iOS Discussion.
-
Force index not getting picked up while running the SQL Query
Hi All,
We are facing an issue with one SQL Query. We have created a custom Index and we are using that index in our query by using the following syntax:
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
Where
ol – Table Alias Name
XXEXH_ORDER_LINES_N2 – Index Name
But still the index is not getting picked up in the Explain Plan.
If any one of you have faced a similar issue then please let us know how you had resolved it.
Appreciate your help.
DB version:10.2.0.4
Apps version: 11.5.10.2.0
Thanks.The query and plan are given as:
SELECT
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
ol.header_id,
ol.line_id,
ol.line_type_id,
ol.flow_status_code,
ol.last_update_date,
ol.inventory_item_id,
ol.ship_from_org_id,
oh.order_number,
ttv.NAME,
msib.segment1,
msib.item_type,
fl.segment1 || '-' || fl.segment2 || '-' || fl.segment3 || '-' || fl.segment4 current_loc,
ship_to.country
|| '-'
|| NVL (ship_to.state, ship_to.province)
|| '-'
|| DECODE (ship_to.county,
NULL, ship_to.city,
ship_to.county
|| DECODE (ship_to.country,
NULL, NULL,
'-' || ship_to.city
) new_loc,
mmt.transaction_type_id,
mtt.transaction_type_name,
DECODE (mil.segment1,
UPPER ('Field%'), 'PLEASE VALIDATE FIELD LOCATION',
hou.country
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.region_2
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.region_1
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.town_or_city
) rma_loc,
ship_su.attribute1 oper_loc,
msib.organization_id --SC#5878
,fa.asset_number --SC#5878
,fdh.code_combination_id --SC#5878
,fa.asset_id parent_asset_id
FROM fnd_flex_values_vl ffvv,
fnd_flex_value_sets ffvs,
mtl_item_locations mil,
--hr_organization_units_v hou,
hr_organization_units o,
-- hr_lookups l,
-- hr_lookups l2,
hr_locations hou,
hr_locations_all_tl lot,
mtl_transaction_types mtt,
mtl_material_transactions mmt,
hz_locations ship_to,
hz_cust_acct_sites ship_cas,
hz_cust_site_uses ship_su,
hz_party_sites ship_ps,
fa_distribution_history fdh,
fa_locations fl,
fa_additions fa,
mtl_system_items_b msib,
oe_transaction_types_tl ttv,
oe_order_headers oh,
oe_order_lines ol
WHERE ol.org_id = TO_NUMBER (fnd_profile.VALUE ('ORG_ID')) --SC#5878
AND ol.flow_status_code = 'CLOSED'
AND TRUNC(ol.last_update_date) BETWEEN '01-SEP-2010' AND '31-OCT-2010'
AND ol.header_id = oh.header_id
AND ol.line_type_id = ttv.transaction_type_id
AND ol.inventory_item_id = msib.inventory_item_id
AND ol.ship_from_org_id = msib.organization_id
AND msib.item_type = 'REN'
AND SUBSTR(fa.asset_number,1,DECODE(INSTR(fa.asset_number,'-'),0,LENGTH(fa.asset_number),INSTR(fa.asset_number,'-')-1)) = msib.segment1 -- SC#11824 / added for fetching all assets with any suffix/ on 20-JUL-2011 by MPRAKAS
AND fdh.asset_id(+) = fa.asset_id
AND fdh.location_id = fl.location_id(+)
AND fdh.date_ineffective IS NULL
AND ol.ship_to_org_id = ship_su.site_use_id
AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_ps.location_id = ship_to.location_id
AND mmt.inventory_item_id = ol.inventory_item_id --added new condition
AND mmt.organization_id = ol.ship_from_org_id --added new condition
AND mmt.trx_source_line_id = ol.line_id
AND mmt.transaction_quantity > 0
AND mmt.transaction_type_id = mtt.transaction_type_id(+)
AND mtt.transaction_type_name(+) = 'RMA Receipt'
AND o.organization_id(+) = mmt.organization_id
AND mil.inventory_location_id(+) = mmt.locator_id
AND ffvs.flex_value_set_name = 'HCCA_AFF_LOCATION' --added new condition
AND ffvv.flex_value_set_id = ffvs.flex_value_set_id(+)
AND ffvv.flex_value(+) = ship_su.attribute1
AND ttv.LANGUAGE = 'US'
AND (ol.ordered_item_id IS NULL OR ol.ordered_item_id > 0)
AND NVL (ol.ship_to_org_id, 1) > 0
AND NVL (hou.location_id, 1) > 0
AND o.location_id = hou.location_id(+)
AND NVL (hou.business_group_id, NVL (hr_general.get_business_group_id, -99)) = NVL (hr_general.get_business_group_id, -99)
AND hou.location_id = lot.location_id
AND lot.LANGUAGE = USERENV ('LANG')
AND (fa.asset_id = fa.parent_asset_id OR fa.parent_asset_id IS NULL)
Plan
SELECT STATEMENT ALL_ROWSCost: 4,065 Bytes: 958 Cardinality: 2
125 CONCATENATION
62 NESTED LOOPS OUTER Cost: 3,140 Bytes: 479 Cardinality: 1
59 FILTER
58 NESTED LOOPS OUTER Cost: 3,139 Bytes: 441 Cardinality: 1
55 NESTED LOOPS Cost: 3,131 Bytes: 420 Cardinality: 1
52 NESTED LOOPS OUTER Cost: 3,130 Bytes: 390 Cardinality: 1
49 NESTED LOOPS OUTER Cost: 3,128 Bytes: 377 Cardinality: 1
46 NESTED LOOPS Cost: 3,127 Bytes: 351 Cardinality: 1
44 HASH JOIN Cost: 3,126 Bytes: 342 Cardinality: 1
42 NESTED LOOPS Cost: 2,443 Bytes: 324 Cardinality: 1
40 NESTED LOOPS Cost: 2,443 Bytes: 315 Cardinality: 1
38 NESTED LOOPS Cost: 2,443 Bytes: 306 Cardinality: 1
36 NESTED LOOPS Cost: 2,443 Bytes: 298 Cardinality: 1
33 NESTED LOOPS Cost: 2,442 Bytes: 268 Cardinality: 1
31 NESTED LOOPS Cost: 2,441 Bytes: 259 Cardinality: 1
28 NESTED LOOPS Cost: 2,438 Bytes: 238 Cardinality: 1
25 NESTED LOOPS Cost: 2,437 Bytes: 207 Cardinality: 1
22 NESTED LOOPS Cost: 2,436 Bytes: 194 Cardinality: 1
19 NESTED LOOPS Cost: 2,435 Bytes: 184 Cardinality: 1
16 NESTED LOOPS Cost: 2,433 Bytes: 168 Cardinality: 1
13 NESTED LOOPS Cost: 2,432 Bytes: 154 Cardinality: 1
10 NESTED LOOPS Cost: 2,430 Bytes: 126 Cardinality: 1
7 NESTED LOOPS Cost: 2,427 Bytes: 102 Cardinality: 1
4 NESTED LOOPS Cost: 779 Bytes: 34,028 Cardinality: 724
2 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
3 TABLE ACCESS FULL TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 777 Bytes: 13,756 Cardinality: 724
6 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 3 Bytes: 55 Cardinality: 1
5 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 1
9 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1
8 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1
11 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
15 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1
14 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1
18 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1
17 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1
21 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1
20 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1
24 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 13 Cardinality: 1
23 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
27 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1
26 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1
30 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 3 Bytes: 21 Cardinality: 1
29 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N1 Cost: 2 Cardinality: 1
32 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
35 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_LOCATIONS_ALL Cost: 1 Bytes: 30 Cardinality: 1
34 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_PK Cost: 0 Cardinality: 1
37 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1
39 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
41 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
43 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263
45 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
48 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1
47 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1
51 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1
50 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1
54 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1
53 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1
57 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6
56 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6
61 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1
60 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1
124 NESTED LOOPS OUTER Cost: 925 Bytes: 479 Cardinality: 1
121 FILTER
120 NESTED LOOPS OUTER Cost: 924 Bytes: 441 Cardinality: 1
117 NESTED LOOPS Cost: 916 Bytes: 420 Cardinality: 1
115 HASH JOIN Cost: 915 Bytes: 411 Cardinality: 1
113 NESTED LOOPS OUTER Cost: 231 Bytes: 393 Cardinality: 1
110 NESTED LOOPS OUTER Cost: 229 Bytes: 380 Cardinality: 1
107 NESTED LOOPS Cost: 228 Bytes: 354 Cardinality: 1
104 NESTED LOOPS Cost: 225 Bytes: 330 Cardinality: 1
102 NESTED LOOPS Cost: 224 Bytes: 321 Cardinality: 1
99 NESTED LOOPS Cost: 222 Bytes: 293 Cardinality: 1
96 NESTED LOOPS Cost: 221 Bytes: 263 Cardinality: 1
93 NESTED LOOPS Cost: 220 Bytes: 253 Cardinality: 1
90 NESTED LOOPS Cost: 218 Bytes: 237 Cardinality: 1
87 NESTED LOOPS Cost: 217 Bytes: 223 Cardinality: 1
84 NESTED LOOPS Cost: 216 Bytes: 192 Cardinality: 1
81 NESTED LOOPS Cost: 210 Bytes: 137 Cardinality: 1
78 NESTED LOOPS Cost: 28 Bytes: 118 Cardinality: 1
75 NESTED LOOPS Cost: 22 Bytes: 97 Cardinality: 1
73 NESTED LOOPS Cost: 22 Bytes: 88 Cardinality: 1
71 NESTED LOOPS Cost: 22 Bytes: 79 Cardinality: 1
69 NESTED LOOPS Cost: 22 Bytes: 71 Cardinality: 1
66 NESTED LOOPS Cost: 19 Bytes: 58 Cardinality: 1
64 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1
63 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
65 TABLE ACCESS FULL TABLE HR.HR_LOCATIONS_ALL Cost: 17 Bytes: 30 Cardinality: 1
68 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 3 Bytes: 13 Cardinality: 1
67 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_UNITS_FK3 Cost: 1 Cardinality: 5
70 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1
72 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
74 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
77 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 6 Bytes: 2,667 Cardinality: 127
76 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N2 Cost: 2 Cardinality: 127
80 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 182 Bytes: 19 Cardinality: 1
79 INDEX RANGE SCAN INDEX APPS.HCCA_HZ_CUST_SITE_USES_ALL_N1 Cost: 1 Cardinality: 489
83 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 6 Bytes: 55 Cardinality: 1
82 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 4
86 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1
85 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1
89 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1
88 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1
92 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1
91 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1
95 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1
94 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1
98 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1
97 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1
101 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1
100 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
103 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
106 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1
105 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1
109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1
108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1
112 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1
111 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1
114 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263
116 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
119 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6
118 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6
123 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1
122 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1 -
Issue with not getting mail in sost for the PR Approvers
Hi all,
I have the following requirement
Currently, requisitioner receives workflow email notification each time the PR has been released. If a PR has 3 approvers, the requisitioner receives 3 identical emails. The problem is that from the email alone, the requisitioner does not know if the PR has been fully released or not. After the first email, requisitioner may try to create the PO when in fact the PR is not fully approved yet.
The case here is when the requisition is created, the mail is sent to first approver to release the requisition and when the first approver releases, mail is sent to next approver and so till all the approvers approve, finally after all the approvals it is sent to requisitioner.
For this I have created an activity GET PR status where i am checking the condition based on release indicator.
When the release indicator is '2' then the final notification is sent to the requisitioner.
The process is working fine in dev system. When there are three approvers and all the approvers have same mail Id when i create the requisition and release manually in me55, I am able to see the mail in sost. This is actually done after running the batch program. But when the approvers have different mail Id's im able to see in swia but not in sost.
Any help is appreciated.
ThanksHi rick,
My bad, I have assessed the issue differently.
Yes im sending a single mail to the requisitioner after all the approvals.
But the issue here is after the requisition is created, the first mail is going to the first approver. When the approver releases, the mail that has to go to next approver is shown in swia.
Now when i run the batch job, it has to appear in sost. But, it is not.
The whole process actually working fine in DEV system but in QAS, it is not.
Is is showing the following message when i manually release the order and tested
Status
StatusText
Cannot process message; no node determined for [email protected] -
HT201263 My itouch does not have an update option for the os
I am trying to set up icloud and it says I must have 5.0 on my device bt the itouch does not have the software update option shown it the directions on the apple website.
Connect to your syncing computer and start iTunes. From the summary screen, check for updates. If you have a 2nd generation iPod, it can not be upgraded beyond 4.2.1.
-
Can not get JSP to work for the first time.
This is my first attempt to write JSPs. When TOMCAT attempts to render my first java server page TOMCAT reports the following two errors:
org.apache.jasper.JasperException: Unable to compile class for JSPerror: Invalid class file format in C:\j2sdk1.4.0_01\jre\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
C:\Program Files\Apache Tomcat 4.0\work\Standalone\localhost\JobEntry\HeadingExample$jsp.java:0: Class java.lang.Object not found in class javax.servlet.GenericServlet.
package org.apache.jsp;
I am on an XP box, running jwsdp-1_0_01, j2sdk1.4.0_01, and TOMCAT 4.04.You might want to try downloading a newer Tomcat Version 4.1.18 works well. Follow the URL below. I have tried this version with the SDK 1.4 in the past, without problems. It might be that your older version of Tomcat just doesn't like the 1.4 SDK. Would take 5 minutes max on a decent http connection to DL and install.
http://jakarta.apache.org/site/binindex.cgi -
I am not getting any sound notification for the FB....iphone running on 6ios....
i got losts of post ...coz many users are getting same pblm.....can apple solve it asap...
Try going to setting and go down to facebook. See if you can change anything there. If you can't then go to Sounds(in settings) and try looking for facebook there. i havn't had this problem but that is about the right steps to solving it
-
There is an update for iTunes but I'm not getting a pop-up for the download.
Hi there: Apparently, there is an update to iTunes available; however, when I go to retrieve it, the pop-up for download doesn't appear. I checked my settings in both Mozilla (preferred) and IE and they seem to be fine to allow such a pop-up but nothing's happening. Any thoughts?
Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.
-
The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.
my os is windows 7. elements 12 worked fine for many months then save for the web stopped working
-
I wish to set a repeat for an event but I do not get a customise option on my iphone 4s so cannot set the third monday of the month - only day, weekly 2 weekly monthly or annually - how do I resolve the problem ?
Week Cal uses the calender database already on your phone. It's just a different front end.
-
Process for adding a boolean option to the web service API
Hey guys,
Here's a little background:
I'm currently working on adding an optional "strict" mode to some of the unmarshalling functions in SchemaMarshaller that will throw exceptions when receiving bad data for certain fields, and also improving the date handling while I'm at it (I want null instead of mangled dates when receiving bad data when strict mode is off).
This is for my benefit at the moment as I'm tired of spending time debugging Flex code when XFire and Oracle are spitting out rubbish (like empty xsd:DateTime nodes, DateTimes in xsd:Date nodes, etc) - but I'm sure other people would like to use it too while we don't have a response validator, so I'd like to do it in a way that I can submit as a feature request (with patch) on Jira.
My questions are about the procedure for stuff like this- where should this option be made public in the API, and who would I talk to about it? Or would it be best for it to always be strict? - That's how I'd like it :) Perhaps it should just log errors when it encounters bad data?
This is the first thing I'd like to "add" to the SDK rather than a simple bug-fix, so I just want to do things in a kosher manner. Sorry if I come across like a total noob :)
Cheers,
-Josh
"Therefore, send not to know For whom the bell tolls. It tolls for thee."
:: Josh 'G-Funk' McDonald
:: 0437 221 380 ::
[email protected]Hey Josh,<br /><br />I'm swamped at the moment but appreciate your interest and your<br />contributions to Flex and WebServices thus far. I'll try and get some<br />time to look into your specific request and what you're hoping to do at<br />the code level, but to answer your question about test cases, you should<br />consider the NIST testsuite for XML Schema datatypes.<br /><br />BlazeDS has historically maintained the WebService implementation, so it<br />appears their test case for NIST based schema tests starts out here (and<br />refers to many data type test cases in the /nist subdirectory).<br /><br />http://opensource.adobe.com/svn/opensource/blazeds/branches/3.0.x/qa/app<br />s/qa-regress/testsuites/flexunit/src/tests/flexunit/xml/NISTXMLSchemaTes<br />t.as<br /><br />Pete <br /><br />________________________________<br /><br />From: [email protected] [mailto:[email protected]] On Behalf Of Josh<br />McDonald<br />Sent: Tuesday, July 08, 2008 8:21 PM<br />To: [email protected]<br />Subject: Re: Process for adding a boolean option to the web service API<br /><br /><br />A new message was posted by Josh McDonald in <br /><br />Developers --<br /> Process for adding a boolean option to the web service API<br /><br />Yeah I knew it'd have to be somewhere outside of SchemaMarshaller, as<br />it's [ExcludeClass] anyway so end users don't see it, nor is it<br />documented in the api docs. Just wasn't sure where it should be. I'll<br />have a think about it some more when I get some down time to work on it,<br />but webservice was where I was thinking it should be too. Didn't think<br />about having it settable on operation as well though, so thanks for that<br />:)<br /><br />Anybody know a good source of valid values for various XSI types (date<br />and DateTime mainly) for testing purposes? Or even who I should contact<br />to get access to that sort of thing? I assume the W3C will take 6 months<br />to answer me, and the answer will be "buy our $10,000 compliance testing<br />suite" or something along those lines.<br /><br />-Josh<br /><br />On Wed, Jul 9, 2008 at 9:46 AM, Matt Chotin <[email protected]><br />wrote:<br /><br /><br /> A new message was posted by Matt Chotin in<br /> <br /> Developers --<br /> Process for adding a boolean option to the web service API<br /> <br /> I think for a top-level user option I would put the new option<br />on the mx.rpc.soap.Operation class (I think that's the name). You'd<br />then have that propagate through to the underlying schema classes as<br />they are used. I'd then also add an option to the WebService class<br />itself, and basically in the Operation it should see if it has its own<br />value set and if not check the value on the WebService. We do this for<br />a couple of other flags too I think.<br /> <br /> End users in general wouldn't look at any classes other than the<br />WebService and maybe the Operation classes, so asking them to set<br />options on the schema classes themselves probably wouldn't work.<br /> <br /> Matt<br /> <br /> <br /><br /><br /><br />-- <br />"Therefore, send not to know For whom the bell tolls. It tolls for<br />thee."<br /><br />:: Josh 'G-Funk' McDonald<br />:: 0437 221 380 :: [email protected] <br /><br /><br />________________________________<br /><br />View/reply at Process for adding a boolean option to the web service API<br /><a href=http://www.adobeforums.com/webx?13@@.59b5be89/1> <br />Replies by email are OK.<br />Use the unsubscribe<br /><a href=http://www.adobeforums.com/webx?280@@.59b5be89!folder=.3c060fa3> form<br />to cancel your email subscription.
-
I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spellingYou will have to contact support by web chat to figure out any such issues.
Mylenium -
Can we disable the anti-alias option for the quick selection tool?
Can we disable the anti-alias option for the quick selection tool?
I can deselect it with the magic wand but not with the quick selection. Any ideas?
thanks,
DominikI don't think you can, but in the refine edge dialog you can use the contrast setting to get rid of most of the anti-alias.
MTSTUNER
Maybe you are looking for
-
Support for slow macbookpro 3.06 ghz 10.7.5
Hi all, my macbookpro is been running slow and having problems for a while now, I've reached the point where it makes it really difficult to work, perhaps the fact that I've a large amount of data on my disk could be parlty the problem. I noticed ano
-
READER 8.2 crashes under MAC OS Leopard
Since I've updated my MAC OS to Leopard (10.5.2) Acrobat reader crashes after few seconds - without any reason: Even in case nothing is done by a user it crashes. Any Hints?
-
How can I establish a Context? - compatibility issue.
I have a situation where it is necessary to invoke a method on a stateless SessionBean that resides in WLS 6.1.2 from a client application class that resides externally on WLS 5.1.0. Everytime I try to establish a context (whether to try and access a
-
How do i get hpeprint to work with print app from eurosmartz?
How do i get hpeprint to work with print app from eurosmartz?
-
Best way to Drape patterns in Illustrator
Hello, I am working with some patterns, and I am trying to get them to follow the contour of my objects. For example, if I had a sock and I want my stitch pattern to follow the sock where it curves around a bend, and have the strokes stretch, when th