Not gettting the list of interfaces for BPM in integration directory

Hi Gurus,
I am trying to create receiver detrmination and interface determination for my BPM. When I select my BPM as communication component, I am not getting the list of abstract interfaces under outboutnd and inbound interfaces category.
What might be th reason? I have tried by re importing the BPM in directory. But no use.
Regards,
Reyaz

Let's say your scenario is :
Sender --> BPM --> Receiver.
Double click on your sender business system and go to Other Attributs tab. Check if the Software Component in which you created your objects, is present there or not. If not then go to SLD and and add the Software Component Version to your Business System.
And then in ID from menu Environment --> Clear SLD Data Cache and then you can try it again.

Similar Messages

Why is Fireworks CC not in the list of apps for download

Fireworks is not on the list of apps that I can buy. Why?

My Mac meets all requirements.
13-inch, Mid 2013 Macbook Ai, 1.3 GHz Intel Core i5, 4 GB 1600 MHz DDR3, Intel HD Graphics 5000 1024 MB
I have been using the trial version of CS 6 until it expired.
I also use InDesign CC, Photoshop CC, Dreamweaver CC and Illustrator CC.

Create UDF for table not in the List of tables

Hi all,
I know that my question maybe easy or been asked before, but I couldn't find the answer.
To create a UDF in SAP B1 version 9.0 you should go Tools -> Customization Tools -> User-Defined Fields - Management...
which is ok and working perfect. but my question is:
If I want to create UDF for a table not in the list of tables there what should I do? I need to create 2 UDFs for table OMRC [Manufacturers], and can't find it in master data tables.
anyone had this issue before?
EDIT : Is it good to add the field by using sql server? I know it's possible, but will it be visible in SAP
thank you
Message was edited by: Samira Haroun

Hi Samira,
There is noit a simple link for this, I advise you to study the documentation for TB1300 SBO Development Certification.
Ypu should also have knowledge of .net, and C# or VB, because you have to make a small program/addon to add the fields
Kind regards
Ad Kerremans

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

Need a lens correction for Canon zoom 8mm-15mm f4/L, it's not in the list of lens in LR

Need a lens correction for Canon zoom 8mm-15mm f4/L, it is not in the list of lens in Ligthroom
and how can I ad it?

It's available with ACR 8.4RC, so I would imagine that it will be available with LR 5.4RC/5.4. Just when that will be, is not known by anybody outside of Adobe. Hopefully soon.

It appears that my desktop Aspire Z5801 is not on the list for an available update to Windows 10?

Any yet my 8 year old Sony laptop is?My big screen desktop is 4 years old ..still so diappointed on finding this.Hope further updates are coming to make comaptible for those not "on the list?"

Geoshar18,
Your system is not listed as an eligible model on the Acer website but that does not mean your system will not support the upgrade itself. What that means is Acer will not be uploading Windows 10 drivers to our support website for your system.
According to Microsoft you have to meet these requirements for your system to support the upgrade:
Processor: 1 gigahertz (GHz) or faster
RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Free hard disk space: 16 GB (32-bit) or 20GB (64-bit)
Graphics card: Microsoft DirectX 9 graphics device with WDDM driver A Microsoft account and Internet access
I have upgraded a couple systems here that are not on the list and they are working fine, if that helps.

Aspire V5 471P, also not on the list for Windows 10

I have an Aspire V5 471P, also not on the list. Is there any reason for these exclusions? What options do we have? Seems kind of strange that some of us should be penalized for no apparent reason. I bought my model at an Office Depot, no different than any other Acer models that might be bought in large chain retail stores. I've loved previous Acers I've had, but this one has been problematic since the beginning. Now I may not be able to upgrade and will be stuck with terrible Windows 8.1? Please advise.
[subject line edited to reflect new topic]

So nearly every Aspire V5 model but mine is in need of new drivers but mine isn't? I find that kind of difficult to believe. This is par for the course though now I think with Acer--minimal support, if any. I'll have to spend time going to websites of each of the hardware components to see if it'll work, look for chipset drivers, etc., just because Acer had decided that some of its customers are simply out of luck. I'll replace this computer as soon as it's financially possible since it has been problematic literally since Day 1 (had to call support). This is my third Acer--there will be no fourth. Hopefully I'll be able to go with Apple and avoid this Microsoft/PC manufacturer nonsense altogether. Microsoft AND Acer should be ashamed of the quality of their products over the past couple of years...

How can I download aps. I am asked to sign in and use my credit card even for free aps, but my country is not on the list of stores. Please help

I have a apple account, but when I try to download apps, I need to submit my credit card, and my country is not in the list of countries. I tried using the default of USA, but it is invalid. Please help

Due to various laws and regulations, you can't purchase/download anything from the U.S. iTunes store unless you are a U.S. resident. Your credit card must have a billing address in the U.S. in order to do so.

When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?

When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?

babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis.

IDOC number is not in the list

Hi,
I am creating an inbound delivery using IDOC. The message type is DESADV and basic type is DELVRY01. After I have populated the control and data tables, I processed them using IDOC_WRITE_AND_START_INBOUND. I have generated the IDOC number after executing the program. The problem is, when I go to WE02, the idoc number is not the list. I am not sure if the IDOC I generated is successful or not. Does it have something to do with the FM that I used. I set a custom process code that will call the FM IDOC_INPUT_DESADV1. Please advise. Thanks in advance.
Lalyn

Hi Arun,
Thanks for the reply. But the IDOC number is not in the list and I can't access it WE19. Do you have any other Function module that I can use to process the IDOC in ABAP? The Function module should be the one to call the FM IDOC_INPUT_DESADV1 to create an inbound delivery. That's what I think causes the error. Thanks.
Lalyn

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

How to set up sms sending on yosemite if my country (Kyrgyzstan) is not in the list of supported countries? thanks

how to set up sms sending on yosemite if my country (Kyrgyzstan) is not in the list of supported countries? thanks

hello guys, i live in lebanon too and i was so frustrated by this. however i found the solution. when setting up icloud keychain, before creating a password for the keychain press on advanced options and choose not to create a password. you will ahve to use your account password to activate keychain on other device. this will bypass the sms confirmation

The following remoteapp program is not in the list of authorized programs.

Hi,
Iam in a pickle at the moment.
My RDS 2012 R2 environment was working successfully previously, arrived from holiday and it is not longer working.
My setup:
**RDS01 ( Session Host and Connection Broker Roles )
**RDS02 ( Web Access, Gateway and Licencing Roles)
The Problem i am facing is, after successfully login to the RDWeb page, lunching the remoteapp i get the following:
1st Get Certificate mismatch ( name in the certificate RDS02.mycompany.local is not trusted )
2nd Hit YES and the following message "Windows cannot start the RemoteApp program. The following RemoteApp program is not in the list of authorized programs: WinWord"
It happens whether i do connect externally.
Internally the SSO does not work ( i did check my certificate and it is installed )
If i run the script Set-RDPublishedName and change it from remote.mycompany.com to RDS01.mycompany.local
1st Certificate name mismatch ( requrested pc RDS01, name in the certficate remote.mycompany.com )
2nd Hit Yes and the app works
It happens whether i do connect internally or externally.
Any help will be very appreciated.
cheers
Elton

Hi Elton,
It sounds like the DNS lookup is resolving to the wrong ip address. When the RD Gateway (RDS02) looks up remote.yourcompany.com to connect to your broker/RDSH it should resolve to the ip address of RDS01, but it appears it is resolving to RDS02 instead.
I recommend you use Set-RDPublishedName to change the name back to what is was before (remote.yourcompany.com) and verify that your DNS settings are correct. For example, if you log on to RDS02 and try to ping remote.yourcompany.com it should try to
ping the internal ip address of RDS01, since that is your connection broker.
-TP

Not gettting the list of interfaces for BPM in integration directory

Similar Messages

Maybe you are looking for