Not resolving domain names

So I just installed a clean CLI install of Arch and I am having a networking issue. I have dhcpcd installed and working but for some reason I cant resolve domain names. When I say go to google or something using lynx it will not work, but if I use the IP adder of google it works fine. This is for every website I go to. Sometimes it will work but more oftain then not it wont. I know its not my router or the DNS because I have other computers on the same network that work just fine. Also insted of my network card being eth0 its enp0s11 insted. What is going on here?

AndrzejL wrote:
Did You added lets say
nameserver 208.67.222.222
nameserver 208.67.220.220
as root to Your
/etc/resolv.conf
file?
I would try disabling IPV6 by adding those two lines:
#disable ipv6
net.ipv6.conf.all.disable_ipv6=1
as a last two lines in the:
/etc/sysctl.conf
(do not forget to leave one - last line - empty) as root and then saving the file and rebooting.
Recently there is some network interface naming problem. Search the forum for similar cases.
Regards.
Andrzej
Edit... Trilby - You beat me to it... Congrats .
Ill try this Someone told me about the other nameservers and I tried that but I would save the file then cat it to see if it save right it reverted back to the old nameservers. O_o also Trilby its not much of an issue I was just like lolwut when I saw that.

Similar Messages

DHCP Not Resolving Domain Name

Ok, I am needing some help here. I have Two 2008 Dc's and We have one Server 2012 which is running DHCP service. The two 2008 dc's are running DNS server. For some reason the pc's are getting the correct dns and wins servers under ipconfig /all but if
i try to ping the domain which is ping.intalh.org it resolves to an older dns server that is not in production. Our servers are resolving fine since they are static, wireless pc's are fine as well. Just wired pc that are dhcp. Any suggestions?

Hi,
According to what you described, it seems that everything is all right. Can you post more detailed information, such as the result of “ipconfig /all” and “nslookup ping.intalh.org” from a client?
When you execute “nslookup ping.intalh.org”, confirm whether the client is using the right DNS server.
If the client is using the right DNS server, but it gets the wrong target ip, I think there is something wrong with you DNS server. You may check the DNS server for further troubleshooting.
We would be happy to help you as soon as we have the detailed information.
Steven Lee
TechNet Community Support

"Database Log In Failed - TNS could not resolve service name"

Hello.
I have an installation of Oracle 10g Release 2 (10.2) for Microsoft Windows (32-Bit) using WinXP Pro on my computer.
I have also installed the compantion CD on the same machine (In a separate home directory) so that I can use PL/SQL.
I have searched through the forum threads but haven't found any similar problem. The solutions that fixed other peoples problem don't seem to be applicable to mine.
I have created a user 'antagning' and some tables and also some PL/SQL procedures that compile fine. When I request
http://localhost:7777/pls/projekt/firsttest
(firsttest is the procedure. doesn't take any params)
I get the famous
Database Log In Failed
TNS could not resolve service name
Verify that the TNS name in the connectstring
entry of the DAD for this URL is valid.
This is my DAD file:
<location /pls/projekt>
SetHandler pls_handler
PlsqlDatabaseUsername antagning
PlsqlDatabasePassword antagning
PlsqlDatabaseConnectString ORCL
PlsqlAuthenticationMode Basic
PlsqlErrorStyle DebugStyle
</location>
and my tnsnames.ora looks like: (there is only one on the machine so there is no conflicting setups I think)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =
localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
finally, this is my sqlnet.ora:
# sqlnet.ora Network Configuration File: c:\oracle10g\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I haven't set any default domain because the database runs on my local computer and not on a microsoft server in a domain. Is that correctly concluded?
I get an OK message when I ping my TNS with "tnsping orcl" (Maybe that information is not relevant in the context)
My webserver is started and is running fine (I think). If I request:
http://localhost:7777/pls/projekt (without any procedure name)
I get the message that no procedure is specified to run so I get some sort of answer from the webserver, so far so right.
When I log in using sqlplus with my own created user account I have to leave the database field empty or the login will fail. If I specify the field with the string orcl
the login will fail. Does that imply that something is not quite right? Maybe that hasn't got anything to do with the failure message.
/Fredrik

Has anyone resolved the problems with using TNSFormat?
As is, I want to move to a shared server setup and to do that I want to use TNSFormat and point to a tns entry which is setup for IPC+Shared connection.
But the Oracle Home that has the Oracle HTTP Server (from the companion CD) does not have SQL*net installed and does not seem to understand TNS.
I have TNS_ADMIN setup, I have ORACLE_HOME_LISTENER poiting to the DB Home.
for the OHS home, using "sqlplus login/pw@ipcshared" works, but "tnsping ipcshared" does not, since tnsping does not exist in the OHS home.
I cannot install SQL*Net from the CD1, since it requires a dedicated/new home and does not want to install in the OHS Home.
The only format that works in a dedicated OHS Home setup is ServiceNameFormat.
Any help or input would be very helpful.
Regards
ps. This is a redhat linux setup.
Message was edited by:
Oli_t

TNS: could not resolve service name

ERROR: ORA-12154: TNS: could not resolve service name
does any1 know what this means...and how to overcome this problem
username : scott
passwd: tiger
host string: myora
i have personal oracle8i in d:\oracle
and d2k in d:\d2k
it connects with the SQLPlus
however with d2k when i try to connect it gives the above error
message.
does any 1 know a solution to the problem...

Hello,
First of all, If you are using PO8i and D2k as a front end
on single machine,no need of specifying Connect String. You can
connect using scott,tiger. If still it is giving problem,try
this one.
Open TNSNAMES.ORA file from folder NET80/Admin in your PC
using NOTEPAD. Look there entry for myora. If it is there,Check
SID,IPAddress or remove word "World" from there. See E.g
ora816 = -- Your connect string
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 10.0.0.3) -- IP address
(Port = 1521)
(CONNECT_DATA = (SID = ora816) -- Database SID
Hope it will work...
Adi

ORA-12154: TNS:could not resolve service name

Hi Guru's
i applied Maintainacepack 3480000 patch on my application for upgrading 11.5.7 to11.5.10.2, after completion of patch, I run the autoconfig it has given bellow error, please anybody can help me, i need to finish my task immediately, please provide me the solution.
autoConfig Profile Phase
Running Profile Process 1 of 1 for CLN_TOP
Executing script in InstantiateFile:
/sgmtemp/prodcomn/admin/install/MSBEP004_dcpsr006osm/clnadmprf.sh
script returned:
clnadmprf.sh started at Sun Feb 17 06:24:13 WST 2008
The environment settings are as follows ...
ORACLE_HOME : /sgmtemp/prodora/8.0.6
ORACLE_SID :
TWO_TASK : msbep004
PATH : /sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodappl/fnd/11.5.0/bin:/sgmtemp/prodappl/ad/11.5.0/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip::/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip:/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14/jre/bin:/usr/java14/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/sgmtemp/prodappl/bin:/usr/bin/X11:/sbin:/usr/lpp/pd/bin:.
LD_LIBRARY_PATH : /sgmtemp/prodora/8.0.6/network/jre11/lib/aix/native_threads:/sgmtemp/prodappl/cz/11.5.0/bin:/sgmtemp/prodora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib
Executable : /sgmtemp/prodora/8.0.6/bin/sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Feb 17 06:24:13 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve service name
clnadmprf.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
thanks

Please Apply "Patch 5985992 - TXK AUTOCONFIG ROLLUP PATCH Q (JUL/AUG 2007)", run AutoConfig, and check then.

IFS 9 : TNS:could not resolve service name

Hello,
I have this message when Trying to connect in Java to IFS 1.2 :
oracle.ifs.common.IfsException: IFS-21008: Unable to connect to
iFS service
java.sql.SQLException: ORA-12154: TNS:could not resolve service
name
I have been developing with IFS 1.16 for a while but now I have
to upgrading to IFS 9 (1.2). To set up my development
environment I did the same thing that I did for the version 1.1.6
1-     Copying all Jar from D:\oracle\ora90\9ifs\lib and I had
them to my classpath
2-     Copying the folders under D:\oracle\ora90\9ifs\settings
to have access to the IfsDefault.properties. file.
3-     I got the new JDBC driver and Oracle Client 9 on my
developer station.
IfsDefault.properties is pointing to the right TSN. When I test
my TSN (orcl) with the SQL+ it works just fine. I tried to use a
Invalid Ifs Service Name instead of IfsDefault too see if I got
a different error message and no, I got the same error. It looks
like the environment doesn’t find the IfsDefault.properties
file ?
Any Idea of it could be ?
There is the code that I use to connect :
LibraryService service = new LibraryService();
CleartextCredential cred = new CleartextCredential
(username, password);
ConnectOptions options = new ConnectOptions();
options.setLocale(Locale.getDefault());
options.setServiceName(repository);
options.setServicePassword(repositoryPass);
_ifsSession = service.connect(cred, options);
// Doit mettre explicitement le Admin flag dans la
Session
DirectoryUser user = _ifsSession.getDirectoryUser();
_ifsSession.setAdministrationMode(user.isAdminEnabled
_logger.info("user " + user +" is now connected to
Ifs " + repository + ", " + _loggedUserCounter + " connected.");
Thank you

Looks like your TNSnames is not properly configured .. Did you
try to do a sqlplus from the command prompt to see if you can
connect to SQLPlus ??

Fundamental Problem: ORA-12154: TNS:could not resolve service name

Hello,
I am faced with a fundamental problem:
ORA-12154: TNS:could not resolve service name
I can say with a high level of confidence that the TNSNAMES.ora configuration file is not the problem. My peer is using the exact same file with no issues. I am using the TOAD database utility to connect to the db host. Also, I have ORACLE_HOME defined and the file is located in /network/ADMIN.
Any ideas?

Hello,
Make sure your toad looking into right tnsnames.ora; also try this from command line after adding following entry to your tnsnames.ora.
sqlplus username/password@ECDEV
ECDEV =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (PROTOCOL = TCP)
        (HOST = rscdd01) --> you can try ipaddress of your server name as well
        (PORT = 1521)
    (SDU = 8192)
    (CONNECT_DATA =
      (SERVICE_NAME =ECDEV)
      (INSTANCE_NAME=ECDEV)
)Edited by: OrionNet on Dec 23, 2008 2:22 PM

MSDAORA,IIS,ORA-12154: TNS:could not resolve service name

Hi All,
I have a Web Service that coded in VS2008, using ORACLE DB(9i).
At a time the application working fine and I can access and do everything with database.
Some other time database server is down for scheduled maintenance. If I try to run the application at this point of time it will raise err "ORA-12154: TNS:could not resolve service name".
When i reset iis it start to work fine for a while.Then same problem occurs again.
My connection string is connectionString="provider=MSDAORA.1;data source=***;user id=***;password=***;"
is there any solution?
i tried that;
If theire is multiple copies of OCIW32.dll you have to make sure that there is only one copy of OCIW32.dll which should be in /Bin folder of the oracle home folder.
Add the IUSR_machine name account and the IWAM_machine name account to the Oracle home folder. Give both accounts full control.
Create empty file tnsnames.ora in same directory as aspnet_wp.exe,

Hi,
The issue doesnt make much sense on the surface at least. 12154 means the client couldnt figure out what you were referring to with your Data Source= entry. If the database was taken down, I'd expect an "oracle not available" or some other sort of error, as the client should have still be able to resolve the entry at least, even if the database wasnt up at the time.
What do you mean by "When i reset iis it start to work fine for a while.Then same problem occurs again."? The same problem meaning you get 12154 when you take the database down? Or you get 12154 without a db restart?
Are you using TNSNames.ora for client naming resolution, or something else (ldap, for example)?
Greg

ORA -ERR :Tns could not resolve service name

Hi,
I am tring to get into sql plus. As the oracle is pre installed and as donot know the system password, I am tring to login as Scott/tiger and host string as 'ORCL'.
I am getting the following error.
ORA-12154 :
Tns could not resolve service name
Is there any way to find the Host string name through any of the installation files.
Please suggest.
Badrinath

Hi,
Open the tns file ( available at oracle_home/network/admin/tnsnames.ora). I do not know what your oracle_home name is. Usually it is oracle/ora81/ under c: or D: or where ever you installed Oracle. Go thru the file. You will find the service name. Use that while logging. If you want to login to ORCL, it has to be there in tns files name otherwise Oracle cvan not resolve the name.
Good luck
Krishna Priya
null

ORA-12154: TNS:Could not resolve service name. (WIS 10901).

HI Gurus, we have the following scenario...
Weu2019ve installed Busines Objects EDGE 3.1 SP3.
The server of this installation is MS Windows Server 2003 Enterprise Edition SP2, Intel ® Xeon Enterprise TM CPU 2.80 GHz 6.5 RAM.
In the Server we have SAP R/3 Installed over a DB Oracle 9i Enterprise Edition Release 9.2.8.0.
We installed all BO bundle with successful and we can use the Designer Tool for create universe. In the creation of the universe, we created a connection to the database of the SAP R/3 System and the test runs well, we save and export the universe to CMS. Then, we used that universe in the WebI tool of the suite installed in the server, and it runs well (we call the universe, selected fields of the table, and after run the query, it gives us registers of the DB).
After all this, we open the InfoView and used the WebI and execute the same universe and the same steps. And when we execute the query the following error occurs .
A database error occured. The database error text is: ORA-12154: TNS:Could not resolve service name. (WIS 10901)
The connection to DB is through Designer and we use ODBC Oracle to create the Universe with the Client type and we used super user system, validated previously OK.
Any suggestion for this error?.
Thanks.
Betto.
Edited by: Alberto Magaña Chávez on Jul 9, 2011 7:44 PM

Make sure there are no syntax errors in the TNSNAMES.ORA file, look for unmatched parentheses. Also check the SQLNET.ORA file.
Is the environment is clustered, if so then make sure you have the ODBC connection in all the servers.

EMS error - could not resolve the name of the server

Hi.
Log on to Exchange 2013 server (CAS)
Try to run EMS on this server and get this error:
...The WinRM client could not process the request because it could not resolve the name of the server.
Nslookup FQDN of this exchenge server -all ok.
What happend? Two weeks ago, all worked.
Thanks.

Hi,
To narrow down the cause, I recommend the following troublwshooting:
1. Change another admin account to try to open the EMS on CAS server.
2. Try to empty your local DNS cache by ipconfig/flushdns
3. Try to Disable WinHTTP proxy by running : netsh winhttp reset proxy
4. Refer to the following article to resolve the WinRM error:
http://blogs.technet.com/b/exchange/archive/2010/12/07/resolving-winrm-errors-and-exchange-2010-management-tools-startup-failures.aspx
if you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

URGENT :: ORA-12154: TNS:could not resolve service name

Hi All,
I am connecting to the db using oracle thin driver in java. I am invoking a SOAP call and after getting the response, i am inserting the response(gen. a pdf file) into my DB. I am using a static connection. I have to insert 130 pdf's in DB. After processing 120 pdf's, the following error has occurred,
ERROR DBUtil - ORA-12154: TNS:could not resolve service name
java.lang.NullPointerException
     at com.elsevier.cds.ew.DBUtil.insertPDF(Compiled Code)
     at com.elsevier.cds.ew.GenerateSoapRequest.generateSOAPCall(Compiled Code)
     at com.elsevier.cds.ew.EOffprintLoad.processPDFFiles1(Compiled Code)
     at com.elsevier.cds.ew.EOffprintLoad.init1(Compiled Code)
     at com.elsevier.cds.ew.EOffprintLoad.<init>(EOffprintLoad.java:138)
     at com.elsevier.cds.ew.EOffprintLoad.main(EOffprintLoad.java:987)
ERROR GenerateSoapRequest -
ERROR DBUtil - ORA-12154: TNS:could not resolve service name.
The checked the oracle listener status. It was UP.
Can anyone help me in this issue.
Thanks,
Rag

Hello,
Make sure that the service which you have specified in jdbc for making connection with oracle, exists in TNSNAMES.ORA file. You will find this file at different locations in 8i and above. So, better search for it. And add you service name in it. Example services is given in this file itself. So, take help from them.

ORA-12154 TNS could not resolve service name error

Hi
I'm having trouble connecting to database throug sql*plus.I'm able to connect through TOAD but getting 'ORA-12154 TNS could not resolve service name error' when trying to login through sql*plus using same credentials .
I tried running sqlplus through command prompt,but when i enter the user-name i'm getting ORA-12203:TNS:unable to connect to destination.
Can someone help me with this error.
Thanks.

It would probably give you an idea where to start looking. You need to make sure that you have the correct .ora files needed for establishing connections. I don't know if your service desk just does the installation but no setup or if they also do the setup configuration. You can also try doing the setup on your own to check. You can use net easy config.

Can not add domain name Error Protected word / inappropriate language

Can not add domain name Error Protected word / inappropriate language
Provide your Domain name :
pragatiassociates.com
Nature of Services provided: It located in India, Punjab. Its a new firm which will be focus on supplying products to Educational Institutes in and around Punjab
Problem: While trying to register domain on domains.live.com it gives error that it contains a protected word or inappropriate language.
The website is first phase version page has been hosted. Domain was purchased on 1-Mar-2014. Please help on priority as I need the mail solutions at the earliest.
Posted query on Microsoft answers no reply even after 4 days.
http://answers.microsoft.com/en-us/outlook_com/forum/oadmincenter-ocustomdom/can-not-add-domain-name-error-protected-word/1322a218-3ad2-451c-a774-ae700465f9c4?tm=1394076201617

Saurav S --
Does your post have anything to do with Project Online, an enterprise project management application? If so, please elaborate. If not, please repost your question in a more relevant user forum. Hope this helps.
Dale A. Howard [MVP]

Oracle 9i "TNS:could not resolve service name" on 64-bit OS

I have a 32-bit .NET 3.0 application that can run on 64-bit OS using WOW64. When I connect to the database on 32-bit OS with 9i (9.2.0.1) client, everything works fine. However, if I install the same client on 64-bit OS (assuming that it would run using WOW64) and run the application, I get "TNS:could not resolve service name" error.
To make sure that it's not something with configuration, I've installed both clients in the same directory on 32-bit OS and 64-bit OS, and copied the same tnsnames.ora and sqlnet.ora files. I can also connect to the database without a problem on 64-bit OS using SQL Plus. The error only occurs when connection is made via the application, which uses .NET oracle client. The only main difference is that on 64-bit OS, 64-bit version of .NET 3.0 is installed.
Does anyone have an idea why I am getting this error?
[tnsnames.ora]
TRADMIN.ASCINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.253.57.44)(PORT = 1521))
(CONNECT_DATA =
(SID = TRADMIN)
(SERVER = DEDICATED)
[sqlnet.ora]
# SQLNET.ORA Network Configuration File: D:\Oracle\Ora92\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DEFAULT_DOMAIN = xxx.yyy.zzz
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
[tnsping on 32-bit OS]
Used parameter files:
D:\Oracle\Ora92\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.253.57.44)(PORT = 1521))) (CONNECT_DATA = (SID = TRADMIN) (SERVER = DEDICATED)))
OK (640 msec)
[tnsping from 64-bit OS]
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.253.57.44)(PORT = 1521))) (CONNECT_DATA = (SID = TRADMIN) (SERVER = DEDICATED)))
OK (590 msec)

Hi, paste in this post your tnsnames.ora and sqlnet.ora files and give us a example tnsping for test your alias database.
Good luck.
Regards.

Not resolving domain names

Similar Messages

Maybe you are looking for