Not saving Display Performance...

Every time I close and then later return to a CS5 document the Display Performance returns to Typical. I have selected High Quality but when I save and close the document this is lost and I am forced into resetting it each time.
This was not the behavior of my foamier InDesign version.
Is there a control/preset I am missing? I looked in Preferences and some other areas but found nothing that seemed to set the Display Performance for the document.
Thanks in advance.

Look again...it's a preference setting.
Bob

Similar Messages

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

6303i - display settings not saved!

Hello - I have updated my 6303i to the latest firmware from the nokia site.
Everything works fine but now any chance I make to my display settings (e.g. wallpaper) are not saved, i.e. the change is being populated until the next reboot of the device. Once I rebooted the device, all my display settings changes are lost and e.g. I am back with a device with no wallpaper.
Any idea what is going on?
thanks

The problem came back a while after installing 10.10.2.
However, it does seem to have been fixed by 10.10.3. Hooray.

My whole document comes out as low res when I export to PDF, even the indesign file also now low res. Tried changing display performance, but that's not helping.

My whole document comes out as low res when I export to PDF, even the indesign file also now low res. Tried changing display performance, but that's not helping.

Are your links up to date? What settings did you use?

TS2529 I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

First backup the old phone to iTunes using right mouse click then backup after that restore from backup on the new device .

Saved entry not getting displayed in calendar

Hello,
We are trying to update calendar with a new entry, it get save.
But when we try to look into Calendar, it is not getting displayed anywhere. Also tried for other days, but the same result appearing.
Please advise on this.
Thanks & Regards,
Jayashri

check if you have enabled "Group Calendar Options" for your calendar view.
To check this, go to the "Title, description and navigation" settings page for the calendar (this is the first option under "General Settings" on the List Settings page), In the "Group Calendar Settings" sections, set it as "No"
--Cheers

Downloads of updates not saving, no prompts or icons in the Application folder-how do I ensure updates are saved?

I am following the instructions to download v 6 but receive no prompt to move the Firefox icon to the applications folder. I have done that anyway, but it's not saving-the latest version is July 11. I then get reminders to update all the time-what am I doing wrong?
I am working on a Mac laptop

A lot of people panic when they see Photoshop displaying differently from other software. But that's normal and expected. Here's what happens:
1. Photoshop is color managed and performs a document profile > monitor profile conversion when it displays. So whatever the document profile is, Photoshop will display correctly - unless you have CM policies set to "off" (...!)
2. Other applications, including many web browsers, aren't color managed and will just send the file numbers directly to the display. This distinction is extremely important, because there will be a slight difference. Again, that's normal. Photoshop is right and the other apps are wrong.
3. Without color management, it all hangs on how your monitor displays color. Most monitors are so close to sRGB that any sRGB file will display roughly correctly. This is why sRGB is the de facto web standard: it can live without color management. And that's why you should always convert web material to sRGB. Yes, that's the Edit > Convert to Profile option. You can also use Save For Web to do this if you check the appropriate boxes.

RZ20 PerformanceAttributes not saved

Hi everyone,
I have a SolMan system being used for monitoring file and processes.
The problem is when i change the threshold values (in CCMS : performance attribute) of an individual MTE, these changes are not saved.
When i restart the server where the sapccmsr client is installed (or restart the service sapccmsr itself), all the performance attributes are reset to default and all my monitoring customization is lost.
However, i noticed that all the changes i have made are saved in RZ21>MTE-Specific properties. It create a new MTE in this list each time I rechange the threshold values when the server restart.
Thanks for your help and sorry for my english
Aurelien

Hi
In SAP the all the properties of the MTE saved as property varient, Normally if you change the properties in using RZ20, that saved with the active property varient.
but if you do it via RZ21 then you can choose the property varient which you want to take (set of MTEs), once had done you can change the value and make that as the active varient,you could see the list of property varient in RZ21,properties section
Properties assigned to MTE classes
Properties assigned to attribute groups
MTE-specific properties
under "property varient" > display overview. Choose the varient and change the status. Make that varient as active.
restart the service and check again. The varient should be the one which you set as active while change.
the step by step guide is below [http://help.sap.com/saphelp_smehp1/helpdata/en/12/49e54f427c3247b9a65cef77288d69/content.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/12/49e54f427c3247b9a65cef77288d69/content.htm]
Please try
Jansi

ABAP - BDC transaction not saving changes to records

I am trying to write my first ABAP code using BDC recording. Essentially I would like to flag the "Final Delivery" field (EKPO-EGLKZ) for a range of documents by recording transaction MASS.
The code runs without errors - but the changes are not saved. I have run the code in "Processing Mode: A" (Display all screens) and the program successfully loops through each record & saves the updated fields. When I look at the documents in ME23N the changes have not been saved.   Running the MASS transaction manually results in the changes being successfully saved so I can rule out any data validation issues.
Does anyone know why the changes refuse to save when running the code below?
I have considered trying to use BAPI_PO_CHANGE instead of BDC, but I am new to ABAP and I thought the BDC code would be less complex.
report Z_MASS_REMOVE_FDI_DCI
       no standard page heading line-size 255.
include bdcrecx1.
TYPES: BEGIN OF ty_tab,
MASSOBJTYP(7),
MASSVARNAM(7),
DOCNO(9),
ITEM(1),
END OF ty_tab.
DATA : it_tab TYPE STANDARD TABLE OF ty_tab.
DATA : wa_tab TYPE ty_tab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'X:\STO.TXT'
* FILETYPE = 'ASC
has_field_separator = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
END-OF-SELECTION.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-MASSOBJTYP,
wa_tab-MASSVARNAM,
wa_tab-DOCNO,
wa_tab-ITEM.
PERFORM open_group.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MASSSCREEN-OBJECT'
                              wa_tab-MASSOBJTYP.
perform bdc_field       using 'MASSSCREEN-VARNAME'
                              wa_tab-MASSVARNAM.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEXT'.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_field       using 'MASSFREESEL-LOW(01)'
                              wa_tab-DOCNO.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(02)'.
perform bdc_field       using 'MASSFREESEL-LOW(02)'
                              wa_tab-ITEM.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CRET'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FDAE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSMSGLIST' '0300'.
perform bdc_field       using 'BDC_CURSOR'
                              'REOML-MSGTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EXIT'.
perform bdc_transaction using 'MASS'.
ENDLOOP.
PERFORM close_group.

Where is BDC_INSERT.
If u use OPEN and CLOSE_group u need to use INSERT_GROUP also to update in database.
A session will be created and u nedd to run the Session in Sm35 in order to update the database.
Edited by: Ranjith Kumar on Sep 18, 2008 6:41 AM

SQL Profiler running trace - where do the rows go if not saved to file

When SQL Profiler trace is running, there are thousands of rows generated and shown in the trace window. Since I am only looking for deadlocks, I am not saving them. Are they just discarded, else where do all those rows go? I really don't want to fill
up the log file.

From your description, it seems you are running Profiler while saving events to a file. All of the displayed events are also written to the file. If you don't need events other than deadlocks, you should not include those in the trace to begin
with.
Be aware that a Profiler trace can significantly degrade server performance when many events are captured. If you must capture a large number of events (or run a trace continuously), I suggest a server-side trace (or Extended Events file target)
instead. This will allow SQL Server to stream data directly to the trace file without the Profiler tool overhead. You can script the Profiler trace for server-side tracing from the Profiler File-->Export menu. Save and customize the
script (file name, max file size, etc.). You can view the trace file(s) using Profiler or fn_trace_gettable.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Message is not getting displayed.

Hi all,
I have a form with KEY_COMMIT Trigger with the code below:
DECLARE
cls_date DATE;
Duration NUMBER;
int_rate NUMBER(3,2);
PA_AMT    NUMBER(10,2);
TRMS      NUMBER;
I_RATE    NUMBER(4,2);
pl_id ParamList;
usernm VARCHAR2(20);
OLD_FDR_NO NUMBER;
BEGIN
PA_AMT:=:KEC_FDACCT_MSTR.AMOUNT;
TRMS:=SUBSTR(:GROUP_TYPE,1,2);
commit_form;
SELECT INT_RATE INTO I_RATE FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
DUARATION_DTL(PA_AMT,TRMS,I_RATE);
message('3- I want this message to be displayed.This is not getting displayed');
message(' ');
SELECT sap_code INTO :KEC_FDACCT_MSTR.sap_code FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
commit_form;
END;
In the above code, you can find DUARATION_DTL(PA_AMT,TRMS,I_RATE);
DUARATION_DTL is a Procedure which is coded in the Program Unit with the below code.
PROCEDURE DUARATION_DTL(PAMT NUMBER,QTR NUMBER,RATE NUMBER) IS
.........SOME variables declared..........
BEGIN
SOME IF ELSE statements
SOME INSERT statements
SOME UPDATE statements
COMMIT;
message('FDR No Saved Successfuly'||:KEC_FDACCT_MSTR.ACCT_FD_NO);
message('');
END;
When I run the form, Message('3') that is the message marked is not getting displayed.
Only the message in procedure DUARATION_DTL that is in green is getting displayed.
Can you let me know why?
Is there anything i should do to display this message,
Or is it because its buggy??
Help me please.
Thank You.
Oracle Forms 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production

Hi AW, I actually don't want to display that message.
I want to know why is that message not getting displayed??
Is that because of the following Triggers??
Trigger:ON_MESSAGE:
if MESSAGE_CODE = 40400 then
message('FDR information saved successfully.');
message('');
else
message(MESSAGE_TEXT);
end if;
Trigger:ON_ERROR:
if ERROR_CODE = 40202 then
message('This field cannot be blank');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 41800 then
message('List of values is not available for this field.');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 40401 then
null;
else
message(ERROR_TEXT);
message(' ');
RAISE form_trigger_failure;
end if;
These above mentioned triggers are present in the form.
Is it because of these triggers , that the message is not getting displayed??
If yes, can you tell me why?

WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

HII All,
i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
       WA-EMP_NO = 123.
        WA-EMP_CO = 'A'.
        WA-EMP_N = 'APOORV'.
        APPEND WA TO IT_TAB.
AT SELECTION-SCREEN.
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
        APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
        WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
        LOOP AT IT_TAB1 INTO WA1.
        WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
        ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
          WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.
Plz help me..
Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
Code tags added and please dont use Caps-Lock.

HI,
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
WA-EMP_NO = 123.
WA-EMP_CO = 'A'.
WA-EMP_N = 'APOORV'.
APPEND WA TO IT_TAB.
* AT SELECTION-SCREEN.                 "Comment this
START-OF_SELECTION.                     " Add this
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
LOOP AT IT_TAB1 INTO WA1.
WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.

Form not getting displayed in sap b one

I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.

Option Strict Off
Option Explicit On
Friend Class frmEmployee
    Private WithEvents SBO_Application As SAPbouiCOM.Application
    Private objForm As SAPbouiCOM.Form
    Public Sub New()
        MyBase.New()
        '// set SBO_Application with an initialized application object
        SetApplication()
        LoadFromXML("frmEmployee.xml")
        'LoadFromXML("MySimpleFormxml")
        '// Get the added form object by using the form's UID
        objForm = SBO_Application.Forms.Item("F_4")
        '// Show the loaded Form
        objForm.Visible = True
        '// Saving the Form as an XML file
        '// although it already exist as an XML file
        '// it is good for practice
        'SaveAsXML(objForm)
    End Sub
    Private Sub SetApplication()
        '// Use an SboGuiApi object to establish connection
        '// with the SAP Business One application and return an
        '// initialized appliction object
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        '// by following the steps specified above, the following
        '// statment should be suficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        '// connect to a running SBO Application
        SboGuiApi.Connect(sConnectionString)
        '// get an initialized application object
        SBO_Application = SboGuiApi.GetApplication()
    End Sub
    Private Sub LoadFromXML(ByRef FileName As String)
        Dim oXmlDoc As Xml.XmlDocument
        oXmlDoc = New Xml.XmlDocument
        '// load the content of the XML File
        Dim sPath As String
        'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        sPath = "D:\Final\Forms"
        oXmlDoc.Load(sPath & "\" & FileName)
        '// load the form to the SBO application in one batch
        SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
    End Sub
    Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
        Dim oXmlDoc As Xml.XmlDocument
        Dim sXmlString As String
        oXmlDoc = New Xml.XmlDocument
        '// get the form as an XML string
        sXmlString = Form.GetAsXML
        '// load the form's XML string to the
        '// XML document object
        oXmlDoc.LoadXml(sXmlString)
        Dim sPath As String
        'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        sPath = "D:\Final\Forms"
        '// save the XML Document
        oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
    End Sub
End Class

Not saving Display Performance...

Similar Messages

Maybe you are looking for