Not sure what happened I down loaded lion and now at the bottom I can see the lio logo and it says paused does anyone know what went wrong or what that means

not sure what happened I down loaded lion and now at the bottom I can see the lio logo and it says paused does anyone know what went wrong or what that means

http://support.apple.com/kb/HT4485 here, this should help

Similar Messages

  • I have 10.5.8 can I down load Lion?, I have 10.5.8 can I down load Lion?

    I have 10.5.8 can I down load Lion?, I have 10.5.8 can I down load Lion?

    10.6.8 introduces the Mac Application Store, the only way to download Lion on the web. However, you can purchase Lion on a USB dongle for $69 US from Apple.
    Although you can't update Leopard from the dongle, you could clone the Leopard volume and erase and install Lion on the original partition and then use the Leopard compatible Migration Assistant. http://support.apple.com/kb/DL1434?viewlocale=en_US&locale=en_US
    All in all, cheaper to just buy Snow Leopard, and then buy Lion from the Mac Application Store.

  • I have been watching videos from my ipad via ATV2 with no problems.  As of yesterday my videos just keep loading and don't play.  I don't think I have done anything differently.  Does anyone know how to fix this.  I have tried unplugging it

    Hi, I have been watching videos from my ipad via ATV2 with no problems for over a year.  As of yesterday my videos just keep loading and don't play.  I don't think I have done anything differently.  Does anyone know how to fix this.  I have tried unplugging it waiting 30secs and then plugging it back in.  I have tried restarting, updating and reseting but nothing is working.  It's quite frustrating!!!! Any suggestions????

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

    my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

    If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
    **Imediately backup ALL your important data while you can still see things on the monitor
    Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
    nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
    perform SMC reset just to check:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • I know my Game Center username and password, but I don't know the email (or maybe apple id) that is for my account. It is not my normal one. I can't log in with just my username, so does anyone know how I can get my email?

    I know my Game Center username and password, but I don't know the email (or maybe apple id) that is for my account. It is not my normal one. I can't log in with just my username, so does anyone know how I can get my email?
    Can you help me please

    Dear
    I have worked renovation of the device and have an account, but I forgot my email
    I do not know E-mail has been linked in game center
    I have a name defined in game center
    Do I have the possibility of knowing E-mail has been linked in game center

  • When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

    When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

    I suspect that beautify doesn't touch CSS that it is not aware  of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
    Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
    Randy

  • When I load itunes it defaults to the store and then I get a Blue Screen.  Does anyone know how to change itunes so that it will default to My Music rather than store.  I need to be able to do this before I load itunes.

    When I load itunes it defaults to the store and then I get a Blue Screen.  Does anyone know how to change itunes so that it will default to My Music rather than store.  I need to be able to do this before I load itunes.

    I solved the problem with the assistance of apple support knowledgebase.  Refer to TS3441.

  • Hi i was wondering how do i get the iphone 5s comforting to know that when the battery gvshym problem or not the issue . i can see the serial number or something like that czech ?

    hi i was wondering how do i get the iphone 5s comforting to know that when the battery gvshym problem or not the issue . i can see the serial number or something like that czech ?

    Try this:
    Go into Power Manager, choose the Logging profile.
    Go into Windows' Power Options, choose a different profile, then switch back to the Logging profile.
    See if this clears any contradiction between the two.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Per instructions I received (in order to sync Foxfire with a database), after loading Foxfire I am now supposed to "click restart Foxfire". I do not see any tab or icon to "restart Foxfire" - does anyone know where I can locate this feature in Foxfire?

    I received instructions to install Foxfire in order to sync Foxfire with a database. My instructions say once I have installed Foxfire (which I have done), I am now supposed to click "Restart Foxfire" I do not see an option to click "Restart Foxfire" - does anyone know where that option can be found in Foxfire?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618)

    I am having the SAME problem with FIREFOX! I restarted, but I see no TAB and no response on my iPhone 4s. I am using FIREFOX 8.0.1, so I did not have to install SYNC as it already comes with. However, Nothing. I cannot fool with this anymore now as I must go to work. Will get back to this page later.

  • HT3500 My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550.  This has operated fine for a long time, but now th printer cannot be found when TimeMachine back ups are taking place.  Does anyone know the cause & remedy please?

    My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550.  This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running.  Does anyone know the cause & remedy please?

    Your points match mine pretty well,though here are some thoughts:
    1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
    2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
    3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
    4. That matches my experience.
    My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.

  • I have 2 airport express base stations that I am trying to use to extend my wifi. I have windows 7 and downloaded the airport utility but it wont pick up my airport express. Does anyone know what im doing wrong and how to get them to work?

    I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.

    Thanks for providing the model information.
    I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
    Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
    Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
    Please post back your results.

  • My phone says volume ( headphones), but there is not nor have i ever used headphones...ive only had this phone a few days ??? does anyone know how to get it off that....as i have no volumer for anything now....thanks

    please help....my phone says volume ( headphones) when u try to turn it up or down...and my phone has no sounds what so ever! how do i take that off...the phone is only a few days old....and i have never plugged headphones into it?????

    this is a follow up from the profane post earlier....
    i have done this twice in two other posts..
    here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
    the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
    so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
    so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
    so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

  • Does anyone know of an official Apple document that states what the supported characters are for the firmware security for all Intel based Macs?

    Same question for user account passwords on 10.8 and later: Is there an official Apple document stating the valid characters for a user's local password?
    The reason that I'm asking is that years ago on the Open Firmware Macs you couldn't use the capital letter "U" in the firmware password. Then there were issues on 10.5 when the user's password was changed and started with the '$' character

    The only documentation that Apple's provided on securiy ended with Snow Leopard. Peruse these. For Lion and beyond, all I can offer are these, but I don't know if they'll answer the question. Finally, contact Apple's Express Lane and see what they say.
    UPDATE: Found this which states: Use a secure password that contains both numerals and letters in the first eight characters.

  • Does anyone know how to unlock a computer that my kids changed the admin username on and they can't remember what they put

    i am trying to unlock my son's computer that we bought from a school supply store. one of my kids changed the administrator user name but they can't remember what the changed it to. the computer is stuck on the login in screen and the password is blank. please help

    If you have the OS X installation discs for this computer, then I suggest you erase the hard drive and install a fresh copy of OS X so you can set up an admin account only accessible to you. Create separate managed user accounts for each of your children.
    This will prevent your children from making any changes to the accounts of their siblings since you will retain the only authority to make such changes. This would be accomplished through the Parental Controls options of Accounts in System Preferences.
    If you need help with this let us know.

  • I updated my ipad3 and now it wont come on. it just shothe itunes logo and none of the button works, it is not responding what do I do?

    Hi

    You are in recovery mode.  Do what your iPad is telling, which is to connect your iPad to your computer via USB and open iTunes.  This link will walk you through the steps, but be advised, it may take several attempts to make it work.
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Varibale Missing

    Hi, I am creating a query on a infoset which is based in FIGL ODS and Sales cube. I have to create a open item report where in i have to put restrictions on Clearing date. For which i was looking for variable 0P_KEYD3 and i didnt found as per other t

  • Application Help in German

    Hello, One of our users when he clicks in Application Help, the browser starts SAP HELP in German language. This happens only for a couple of them and the rest of the user commuinty is having ENGLISH. Can any one suggest if it is any parameter settin

  • Connect ipad to projector or PC

    I teach in a classroom that has a PC connected to an Epson projector. I would like to use an ipad app (such as explain everything) to record audio/video of me working problems in class.  At the same time I'd like the ipad screen to be projected by th

  • Screen saver unlock/lock times....

    I'm looking for a way to track when folks unlock/lock their screen savers. Is there a program or log file that can assist me here? I need to be able to do this so I can track when users are unlocking/locking their machines. Most users don't logout of

  • Strange behavior with spell object

    Here is a small example (pretty much the same as the example on http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/wwhel p.htm?href=JavaScript_SectionPage.70.1.html&accessible=true for checkWord). The following bare