(notation) dont know how to ask this question , but here we go

How do i change the tempo of a song without adjusting the actual tempo?
heres why:
im composing songs in a tempo that sounds great by ear, but i need to decrease each value of each note in half so it can be in a 1/2 time tempo for my musicians to read easier.
if the song sounds great at 100bpm, i want to compose it at 50bpm, so theres not that many rests, and other values harder to read.
the only reason i need to do this is to make it easy to read for my readers, and remember , i can't read notation, just "midi blocks".
sorry about the vague explanation, i just dont have the theory.

Musical scores (which I assume you mean) don't work like that.
There is no 'tempo' value like BPM.
You just play the notes faster or slower - the time notation in musical scores has nothing to do with the 'speed' of the piece. It just tells the musician the 'type' of rhythm or pulse of each bar/section.
This really isn't the place to go into Musical Score theory, but what you are asking doesn;t make any sense because you are comparing apples with pencils.
What I think you are asking is that once you have composed your BPM arrangement then you convert this to a musical notation and that is where your problem is?
If so, and again I am no expert, then simply reduce the BPm of the arrangement and then use the notation from that. Perhaps someone else understand what he is trying to do. After all if you are reading notation, that is all you are doing, reading notation. It's like a book with words, you can read them as slow or as fast as you like. There are no rules except the grammar and that is what the 'time signature' and notation is, just grammar.
Does that make sense or have i really missed the boat here?

Similar Messages

HT201303 hi so my payment was declined in itunes store and i dont know how to fix this problem,but all details entered correct....so whats the story?

hi so my payment was declined in itunes store and i dont know how to fix this problem,but all details entered correct....so whats the story?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

I don't know how to ask this question... Can you help?

I'll state right from the get-go, this is NOT a Premiere problem. This is a Windows problem, but I don't know exactly what it is.
Why I'm I posting it here? It's in Premiere that I notice it the most.
I can be watching my playback in Premiere fine and then all the sudden, my playback will stop. At first I thought it was a bug in Premiere, but then I notcied it happening in AE and other non-Adobe programs.
The computer is acting like I clicked away from Premiere, like on the desktop. Playback stops and then I have to click my Premeire window again to make it active and then play again.
This happens every 5 minutes or so (haven't timed it).
When it clicks itself out, it doesn't really go anywhere that I can tell, but something is definitely making my active window/program become inactive.
I'm not sure how to even phrase this question since I don't know what is really going on. But it's driving me crazy in Premiere as I'm in it about 15 hours a day. So it's happening, as you can imagine, 5-10 times an hour during my playack.
In fact, just at this very moment it did it again while writing here. My Chrome page became inactive and I had to reclick right here to continue writing.
Any suggestions on where to even start?
I've had probably 50 computers since Windows 98 and I've never seen this before.

If it happens at regularly timed intervals of user input inactivity,
I would suspect a power option trying to spin down a drive
or blank the display.
I would start 'GodMode' and check all of the power options.
Create a new folder, and give it this exact name:
GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}
Also see:
Tuning and optimizing Windows 7

My Macbook is not working properly, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple, help me?

My late 2011 Macbook Pro is not working properly it is very slow and extremely painful to use, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple at the moment, can someone please help me?

Your problem description is generalized and non-specific. I would make another appointment at the Apple store and insist they help you execute their suggested fixes.
Incidentally, if you search this site, Apple has excellent articles re: restoring a system.
Barry

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings.

I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings, im the only person who uses this computer

You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

I dont seem to have any network and i dont know how to fix this?

i dont seem to have any network and i dont know how to fix this?

You need to have a data plan with O2 and data access provisioned for your iPhone by O2.
Contact O2.

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos?

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciated

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

Hi - I've brought the new iphone 5 but can't download my music from my itunes account even though I have the latest version (10.7). All i can see is that my account is not showing the iphone 5 as a 'managed device' and i dont know how to get this added ?

Hi - I've brought my iphone 5 but cant seem to download my music from my itunes account onto it. I've downloaded the latest version of itunes as i heard this could be a problem but still no joy. The phone tries to sync when i plug it all in to the pc and even has the capacity bar showing about 12gb of audio but there is still nothing downloaded onto the phone.
The only thing i can see that might be causing the problem is that when i go into my itunes account it doesn't show that the iphone 5 is an option is the 'managed device' section but i dont know how i can add the new iphone 5 to this....
Can anyone please advise me on what to do ?
Many thanks !
Razor

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I really dont know how to explain this but here it goes. Idk how this happend but i want to somehow get my music from my ipad onto my new computers itunes. The problem is that my ipad is authorized on a broken pc which is authorized with an old apple id.

Hi
Alright im not quite sure how this happend but here it goes. I am trying to sync all the content from my ipad to and new computer. But i get a message that my ipad is authrorized on another computer. But the problem is that my old computer is broken. I also think that the old computer was authorized with my ipad from my old apple id which i do not know the username or password. So how will i be able to authorize my ipad on my new computer?

Wow my luck. Unfortunally my backup file is corrupt :/. i was thinking is it possible to put my music on my computer via copytrans or other software then transfer my purchases on my ipad like apps. Then restore my ipad so that the other authorization is gone then transfer my music to itunes then register my ipad to my new computer then sync? I could also put my music on disc or something else instead of a transfer software if that would work.

How do i set up my kindle to receive audio books? Is there a MAC filter? it must be disabled and I dont know how to do this

how do i set up my kindle to receive audio books? Is there a MAC filter? it must be disabled and I dont know how to do this

By default, any type of MAC filtering is disabled on the AirPort base stations ... unless, of course, you or someone else enabled it.
If it is enabled, to disable it, you would use the AirPort Utility.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Access Control tab > MAC Address Access Control: Not Enabled

HT1459 about a year ago my ipod went off and wouldnt turn back on. i can finally turn it back on now, but all it shows is a picture of the apple charger with an arrow pointing to the circle itunes app. i dont know how to fix this.

about a yar ago my ipod went off and wouldnt turn on. i can finallly get it to turn on now but all it will show is a screen of the aple charger with and arrow pointing to the circle itunes app. does anyone know how to fix this?

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

Im sorry to ask this question but am new too the imac world. Should i BUY intigo AV as suggested by apple and my bank has offered me something called Rapport!!! Any advice very much appreciated thanks

Im sorry to ask this questioon, but am new to apple. Should i as recommended by apple buy and install intigo av, and can anyone advise me on Rapport as offered by the bank free of charge.
Can anyone tell me how to increase the font size of the menu bar at the top of the desktop screen without changing the display setting.
Told you I was new

Kevsmac...
You do not want Rapport...
Read a post from one of their representatives > Trusteer's Rapport Software: Apple Support Communities
If you want to install a/v software, use either ClamXav or Sophos.
Free Antivirus for Mac - Sophos Anti-Virus for Mac Edition
Apple - Downloads - Networking & Security - ClamXav
Good article here > Thomas' Corner : Mac Virus Guide

Photos gone. I don't even know how to ask my question.

My photos are not visible when I opened iPhoto. All the albums I created and the titles I gave the photos are gone. The Last Import has 2 photos I scanned 18 months ago. I have an iMac 10.5.8 and iPhoto and iPhoto '09 version 8.1.2. I know I'm probably not asking the question correctly because I do not even understand how iPhoto really workds or what it is. I just want to know where my photos and all the sorting I did is.

The point is with iPhoto it's so search to tag, group and find specific photos. Terence Devlin posted the most succinct description of how to use iPhoto to manage photos. The following if from this topic: Better way to organize my images?: Apple Support Communities
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 40k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organization is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.
If you're rather manage files in folders then iPhoto is not for you.

(notation) dont know how to ask this question , but here we go

Similar Messages

Maybe you are looking for