Note playing twice

I'm currently using MidiKeys (1.71b) to input notes with Garageband 3. I'm using the virtual instrument Le Synthe (4.1) to generate sounds. The Le Synthe plugin is awesome and generates some wonderful sounds, very similar to the original EMS Synthi. However my problem is, when I play a note within Garageband, using either MidiKeys, the Keyboard with mouse or the musical typing function, the note plays when I press down on the key (as expected) but then plays again on releasing the key.
If I play a note using one of the Garageband instruments, for example the default piano, the note sounds fine, only sounding on key press and not sounding again on release. Therefore I'm not sure if this is a Garageband/plugin issue or an issue with the plugin itself.
Another piece of information, the Le Synthe soft-synth uses Pluggoruntime, just in case that has a bearing on the problem.
Any advice most appreciated.

I am having precisely the same problem and also did not experience this with the last version of iTunes. As opposed to Jagged_Link, however, I am always getting this problem. I have a very fast dual core computer Athlon 64 x2 4400 with 4 GBs of Ram so I don't think that a performace issue is the source of this problem, but I do have many other applications running at the same time (azureus, firefox, beyondTV). This was never an issue with the old version and I think that the problem might have to do with the gapless playback analytics (a problem with the process, perhaps). I will try eliminating all apps other than iTunes to see if there is a change.
By the way, a repair of iTunes, using the original installation file, did not change my situation. I only use MP3s (no AAC) and it be helpful if the other posters can provide this info as well, so that the problem can be identified better.
I hope we can find the problem and get it fixed!

Similar Messages

  • HT1657 I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

    I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

    For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
    Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • TS1389 I purchased a song on iTunes that is now appearing twice on my library; the first download only plays 37 seconds of the song, the second download will not play & prompts me to authorize the computer to allow it to play.  Suggestions?

    I purchased a song on iTunes that is now appearing twice on my library; the first download only plays 37 seconds of the song, the second download will not play & prompts me to authorize the computer to allow it to play.  Suggestions?

    Im having a similar promblem! Only its doesnt work on my Itunes library and the song ends at 49 seconds. Have you fixed your problem yet?
    p.s. my discussion is on the following page but no one has responded yet as I only just posted it.
    https://discussions.apple.com/thread/4097402

  • After updating to windows 8.1 iTunes will not play video

    I recently updated to Windows 8.1 but since i have my iTunes will not play video i previously downloaded from the iTunes store. The video will play in QuickTime without issue though, please help

    sorry it's not my apple id. it's my icloud email/account. after i updated to ios 8.1.2 my icloud acct on my phone is wrong. it's using my old college email address instead of my current icloud account email. my old college email address *used* to be my apple id, but i changed my apple id to my gmail account a few months back. anyway i can't "sign out" or delete the icloud account bc it thinks my college email address is my icloud account and it  keeps asking for the password. so i'll type in the current password for my icloud account and it says it's wrong and i need to retry or change the password, which i've already done twice and nothing changes. probably bc its asking for the password associated with the college email address it thinks is my icloud acct.
    i can access icloud on my desktop without a problem...   make any sense?  do i have to restore my phone now or is there a solution?  i've wasted the last 2 days trying to figure this out. i can't send or receive emails on my iphone bc of this. which really ***** for work.

  • My 2008 Mac Pro running Lion will not play HDV1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. Anyone have any idea how to fix this?

    My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.

    there was a recent software update that seemed to screw HDV up.  Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
    Worst case scenario, do as Shane suggests.  But might I suggest you take a look at the user tips section of the forum.  there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

  • IPod Classic not playing songs

    Hi
    Grabbed my 160 GB iPod Classic yesterday and the entire thing was empty. No clue what happened. The only thing I did was update the OS and download a new album from iTunes.
    Resynched the device twice now and now the iPod is not playing some songs. Some play, some tracks skip on to the next one without playing.
    Not finding a clear solution in my searches, though others seem to have had the issue.
    All my songs play fine in iTunes.
    Would love a solution, cuz I like my iPod!
    thanks,
    D

    What format are these problematic files encoded in?  I assume you have worked through all of the suggestions here already?
    Troubleshooting songs that skip
    B-rock

  • Videos not playing in Safari

    Hello,
    I cannot seem to get any videos other than youtube to play on my macbook pro. I just updated my system and nothing seems to be working. help!
    I am currently running OS X version 10.9.5 and safari version 7.0.6
    These are two examples of websites that the videos will not play on, they just show up as black boxes.
    http://www.tvland.com/shows/younger
    http://www.nytimes.com/video/theater/theaterspecial/100000002903814/in-performan ce-jessie-mueller.html
    I would love some assistance on this. thanks!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Itunes not playing songs fully

    There are a few songs that itunes is not playing. The one I bought from the itunes music store. It will play about 18seconds of the song and the skip to the next song. I have the lastest version and everything. And when I transfer the songs to my ipod it does the same thing. How can this be fixed?
    Thanks!
      Mac OS X (10.2.x)  

    For the CD burner issue, you'll want to check out PatchBurn (MacUpdate.com has it I believe) to patch your drivers. It works for almost ANY CD burner made. As to the song itself, check to be sure the play time shows more than 18 seconds. A lot of songs you can "check out" before you buy, and they download between 15 and 30 seconds of the song with the EXACT same name as the one you can purchase. I have slapped myself once or twice when I checked out a track, and then purchased it, but like a fool, when iTunes asked if I wanted to replace it (the sample) I chose NO, so I bought a song and kept a sample of it only. That's a big part of why I quit sampling songs from the store.

  • ITunes Radio not playing songs I want

    I set up a station with the following artists: Gene Clark, Poco, Flying Burrito Brothers, Pure Pararie League, Gram Parsons, New Riders of the Purple Sage, The Byrds, etc. I have the "variety" setting selected for the station.
    The station plays very well on my iMac with most of the groups represented.
    However, when I play the station on my iPhone (while on my bike) it plays CRAP. None of the artists that I chose play and yesterday three songs each played twice in one hour and none of them were on my list.  I keep trying to refine the playlist but it has not helped when listening on my iPhone.
    Any suggestions?

    Anyone know how to fix this?

  • Songs playing twice on iphone & ipod

    just downloaded some songs and transferred them to my iphone & ipod. i've noticed that some songs are playing twice even if the curved arrow on the side is not even highlighted, meaning its supposed to play just once and move to the next song. any input on this matter would be appreciated. tnx.

    Double syncs can be a result of syncing via iCloud and iTunes both. It's one or the other.

  • My ipad2 will not play my iTunes video that i just purchased; i've deleted and reloaded, but they still won't play, only the music

    My ipad2 will not play my itunes videos that i just purchased; I've deleted and reloaded them twice, but still won't play; plays music only, any suggestions?

    You are playing them in the Videos app correct? Music Videos will play the video in the videos app, not in the Music app.

  • Playlist songs do not play sequentially

    When I listen to a Playlist on the Touch it does not play the songs in the order that they appear in the Playlist. It skips around like it's on permanent shuffle. This is OK for music playlists, but it does not work when I am listening to Books that have 30 chapters and it skips from Chapter 1 to 12. Is there a way to play the songs or chapters in the same order that they appear in the Playlist?

    I'm an idiot. I didn't realize that I needed to tap the Shuffle arrows twice to remove the Shuffle effect.

  • Video does not play just a green screen

    help.
    i built a dvd project with several video (m2v) files.
    then i did some changes in fcp and re-exported the files, same names etc.
    then in dvdsp - some of the video files will not play, or play 2 secs only, or play as a green screen...
    tried re-exporting, that worked twice, tried rebooting that worked about twice too, but now nothing works.
    anybody had this problem?
    btw the software is all up to date, fcs 2.
    thank you

    the bitrate is just from a dvd setting in compressor - i think i've eliminated that though, since this only happens to some files, whereas all the files are from the same compressor setting. i think it's 90mins draft qual.

  • My volume automatically turns itself all the way down whenever I start my ipod (even when I'm not playing music)

    My volume automatically turns itself all the way down whenever I start my ipod (even when I'm not playing music). As soon as I slide my ipod into opening the volume goes all the way down. Even if it's already completely off, the audio icon comes on the screen, which tells me the ipod is still trying to lower the volume. As I said, I don't even have to be listening to music. I can be on the opening screen. When I turn the volume back up, it immediatley turns it back down. It only doesn't go down if I physically hold my finger to volume bar on the touch screen.
    And yes, I've updated all my software (on my ipod and laptop). I've also entirely reset my ipod twice.
    Tell me, is it time to ditch the ipod and find some other sort of mp3 player (this is one problem at the end of a long list of less debilitating but equally annoying issues I've had with my 2 ipod touches)

    Yeah, I probably mean restore. Multiple times though!
    Also, I forgot to mention that this issue persists regardless of whether or not my headphones are plugged in.

  • 2Gen iPod Shuffle Does Not Play .m4a Songs

    My 2Gen iPod Shuffle 1GB only plays songs that I purchased from iTunes (.m4p) and will not play any songs that I ripped to iTunes (.m4a). According to iTunes, I successfully transferred 80 songs on to my Shuffle. Under the Settings tab, it shows that all the songs are loaded and I have plenty of capacity available. Under the Content tab, all my songs are listed. I have the latest software version and have reset twice with no success. My iPod Classic plays the songs fine. I appreciate any help or suggestions.

    Ian - thanks for your input. My bit rate was well under the limit. This is what I've found out so far. The songs that my iPod Shuffle do not play are the (.wma) songs I converted to (.m4a) using EasyWMA. The converted songs work fine on my MacBook iTunes and iPod Classic, but not the iPod Shuffle. I contacted EasyWMA and it was suggested that I convert the selected songs to either (.mp3) or AIFF. As an experiment, I converted some (.wma) songs to AIFF using EasyWMA and had iTunes convert the AIFF files to (.m4a). Interestingly - it worked. I have no idea why the Shuffle did not recognize the EasyWMA (.m4a) direct converted songs (especially since the iPod Classic and iTunes had not problem playing them) - but apparently the iTunes conversion does something that the Shuffle software requires. Still a mystery, but at least I now have a much wider assortment of music on my Shuffle than I started out with.
    Thanks again - George

Maybe you are looking for

  • The document "BOULET PEANUT - OFF LINE 3-QuickTime H.264.mov" could not be opened. An unknown error occurred (-101)

    I turned on my mac this morning after using Qt all day yesterday with no problems I get this message The document "BOULET PEANUT - OFF LINE 3-QuickTime H.264.mov" could not be opened. An unknown error occurred (-101) Also QT will not play the audio o

  • Creating SNP planned order using ''BAPI_MOSRVAPS_SAVEMULTI3'

    Hi Experts,                   I am new to SAP-APO, kindly clarify my question. I am using 'BAPI_MOSRVAPS_SAVEMULTI3' with source of supply PDS for creating SNP planned order by passing 'EE' in the  table parameters 'ORDER_HEAD-MASTER_ATPCAT'. It is c

  • Saving itunes files to external hard drive

    Ok, hopefully someone can help me with this: I have already saved my cd collection (nearly 8000 songs) onto an external hard drive that has over 90 gb using WMP. I am trying to convert the wma files to mp3's to put them on itunes so I can get them on

  • [SOLVED]HELP! Can't change Apache default documentRoot!

    hi, everyone, I encountered a weired apache problem. Environment:      Archlinux 2.6.27      Apache 2.2.9-4 Problem:      I changed apache default DocumentRoot (/srv/http) to another place (/home/qianli/WWW/http), but I got Error 403 unless I used de

  • ORA-01403 :no data found in apex

    dear all Please, not to view this thread as the contents are same posted in another thread with a different subject. i have a form with 6 regions. in one of the region i place a button save. i have a conditional process to insert the data in the tabl