Notebook does not see mPCIe card (asm1061)

Aloha Community,
i am using an old notebook as a small server (cups/ftp/http/etc).
The Notebook is an old Dell Inspiron 1520.
I attached three 3,5'' HDDs to it which are powered via an external PSU.
the first HDD is connected to the original sata-port.
the other two are connected to a ASMedia ASM1061 Sata-controller. This controller sits on a small mPCIe card which i fitted on one of the three mPCIe slot the Notebook offers me (i tried all three).
In Bios all mPCIe-Slots are activated, still the OS does not see the HDDs.
also lspci seems not to see the card. Any ideas?
arne in ~/ > su arne
Passwort:
+ OS: Arch Linux x86_64
# Hostname: Yoshi
### Kernel Release: 3.19.0-gbdccc4e
##### Machine Hardware name: x86_64
###### Uptime: 0:26
; #####; Packages: 1257
+##.##### Processor Type: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
+########## Root: 572G / 917G (62%) (ext4)
###############+
.######; ;###;`".
#########. .########`
#' `#
[arne@Yoshi ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[arne@Yoshi ~]$
hope you guys can help me!
greetings
Last edited by arch-serv (2015-02-14 00:46:53)

that's the problem i guess... according to the bios settings all mPCIe slots are enabled, still the card does not show up.
arne in ~/ > lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1,9M 0 part
└─sda2 8:2 0 931,5G 0 part /
arne in ~/ > sudo dmesg | grep -i sata
[sudo] password for arne:
[ 0.511917] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.524037] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 26
[ 0.524043] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 26
[ 0.843388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.843416] ata3: SATA link down (SStatus 0 SControl 300)
arne in ~/ >
even without the correct drivers the card shoud show up in the output of lspci shouldn't it?
greetings

Similar Messages

  • PulseAudio does not see my card (and I have to use PulseAudio)

    ALSA works fine.
    To be specific, pavucontrol does not see my card (only sees my ATI HD5700 graphic card as HDMI output under "output")
    Here's aplay -l:
    card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Card info
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
    Subsystem: Giga-byte Technology Device a002
    Flags: bus master, slow devsel, latency 32, IRQ 16
    Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    Interesting thing that happens:
    [bogdan@galaxy alsa]$ aplay -Dplughw:0,0 -fcd Front_Center.wav
    aplay: main:660: audio open error: Device or resource busy
    The reason I have to use PulseAudio is stupid skype that crashes on start without it installed.
    Help?

    Yep, that's the one I have installed. However it looks like the problem fixed itself. The sound now works, HOWEVER, I have a 5.1 system and only center, rears, and the sub works. Left and Right (main) don't. pavucontrol is set to 5.1 output. When I turn down the individual volumes of main left and main right, the center speaker is the one that actually is turned down. It's as if PulseAudio thinks that center speaker somehow represents both main left and right.

  • Encoder 3.1 on Windows 7 64bit does not see video card

    hi
    any help or suggestions would be greatly appreciated;
    We are running Newtek's VT[5] on a windows machine and have been
    very successful running Flash Media Live Encoder 3.1, streaming Live
    to a server.
    Recently we were upgraded from XP and 32bit to Windows 7 and 64bit;
    Now the encoder does NOT see the video, although it recognizes both
    the VT video device and VT audio device. My understanding is that
    Flash Media Live Encoder 3.1 should run on the operating system
    and with Newtek VT[5] (even though the VT capture card is not on Adobe's
    official list)
    http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.1.pdf
    Of course....Adobe wants me to purchase a contract for tier-2 support to answer
    the question of whether the encoder will work on our 'new' setup.
    again,
    any help or suggestions would be greatly appreciated;
    calvin tullos
    space telescope science institute
    [email protected]

    Are you sure that correct and latest device drivers are installed on that machine?
    Please check the video device settings. If FMLE is able to detect the device it should get the signal and work with that.

  • HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

    I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

    One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
    Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

  • Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99

    My EOS 350d has not worked since it was shipped to my daughter.  Bought new memory card and camera still does not recognize that a card is in it.  When connected to computer I could see card but it had 0 used memory and 0 memory available.  Now it does not show at all.  Using canon software get same response--no memory card.  Have tried with two different memory cards.  Even formatted one card on PC, still nothing.  Any ideas what to try next--pins look like they are all in correct place.

    Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc.  The more I looked into the 350D and memory card compatibility the more I think that may not be the issue.  In all honesty, I'd contact Canon support as you may have to send your camera in for repairs. 
    Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries.  Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem.  If not, contact customer support.

  • OEL6.1 in VM manager does not see network card

    I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.

    I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
    I then used the create new Virtual Machine and selected the server pool.
    I selected the ISO file with OEL 6.1.
    I gave it a name, memory size, console password.
    Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
    It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
    That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device.

  • Macbook pro does not see sd card

    I've repeatedly inserted an SD card into my MacBook Pro but am unable to see it.
    I'm new to Mac product and the card was formatted in a Windows 7 system. It has documents on it which I'd like to edit.
    I could understand not being able to access it, but, the Macbook Pro gives absolutely no indication the SD card was inserted into the slot.
    I'm sure I'm doing something wrong.
    Suggestions?

    I had the same problem.  I tried everything that everyone's suggested, but no results.  Then I sprayed a can of air/duster into the slot.  Voila!  It works!

  • Compaq Presario CQ62 laptop does not see SD card

    I have a Compaq Presario CQ62 laptop (Windows 7 64bit) that has a built in media card reader that has never worked.
    When I insert the SD card it makes the "USB Beep Up sound" that says it sees the card - but when I go to MY COMPUTER, there is no device listed for the SD card.  How do I read and write to an SD card with this laptop?

    I have done that.
    In DEVICE MANAGER I can see the SD Card show up under "Disk Drives" when the SD card is inserted, and disappear when it is removed.
    Under Storage>Disk Management the SD card shows up as drive 1 (main drive is drive 0) but no drive letter. 
    When I right-click on the SD card Drive 1 and try to change to a drive letter, I get an error message and it will not let me.  It will not let me format either. 
    The driver is from microsoft and is old - 6/21/2006. I did some google searching and read that a driver update would fix the issue. I uninstalled the card reader driver, got a new driver from HP and installed it, and when I inserted the SD card it loaded up the old driver...ugh.

  • XP PC Does not see Media Card. Device Memory and Media Card are not available.....

    I am starting a new thread because the old one was marked as resolved and it isn't.
    My Windows XP desktop is no longer seeing my BB Storm Media Card. I am getting the error:
    "Device Memory and Media Card are not available because the Mass Storage is currently in use."
    I have followed these directions:
    Options > Memory >
    Media Card Supoport - ON
    Media Transfer Protocol (MTP) - ON
    Mass Storage Mode Support - ON
    Auto Enable Mass Storage Mode When Connected - YES
    SAVE
    I have application free pace 8.1 MB
    and the error message:
    "Device Memory and Media Card are not available because the Mass Storage is currently in use."
    The card is there and is seen by my BB Storm. Media > Explore
    I have removed and reinstalled the card.
    On the desktop I have tried Explore as well as Disk Management and nothing shows up for the Media Card although the Blackberry itself is present.
    Please help.

    Hi there!
    Give this KB a try perhaps?
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HP Slate 7 does not see SD card after update

    My tablet also just installed Android update and it will no longer recognize the SD card. I tried another SD card and it also is not recognized.Tablet model is Slate 7 4601It shows Android version now as 4.1.1Build number HP_slate v1.05.17_userI have my music and some movies on the sd card and it always worked flawlessly before the update.i also Tried to reboot,but nothings happen pls help.Any siggestions? Is HP listening? It sounds like others have suffered the same issue, pls make an action...many of us suffered same issue....

    Hi!, djaulbryan: Your problem is the same what many users, in tablets with OS Android 4.1.1, when actualized compilation number v1.05.17_user.  You can download and install the apk File Manager HD, for use Cloud, FTP (File TRansfer Protocol), LAN, etc ... HP know this problem and IMHO, this problem, will be solved, soon.

  • Aperture does not recognize camera card.

    Aperture does not see camera card iin card reader connected to a USB port, although I can see the card both in iPhoto and with Finder.  When I plug it in it shows very briefly in Aperture and then dissapears. This is something new as I have used the software, card and card reader for a couple years and had no porblems.  Aperture sees all the other components of the system, including external drives, but only briefly (1 second) the card reader.

    Hello John,
    If after reformatting the card you still have problems to see your camera in in Aperture you may have a problem with the "Preferences" file.
         Remove the file "com.apple.Aperture.plist" from the "Preferences" folder in your User Library, as described in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805; don't delete the file, just remove it to the Desktop, so you can put it back, if it does not help, for after removing the Preference file all settings will be reset to their default setting.
    Léonie
    P.S. How do you delete the images from the card, if you do not format the card to erase them? It is not save to let any imaging software on your computer do that, that may corrupt the file system on the card. Your camera knows best how to delete the images.

  • I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card.

    I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card. Please help to solve this problem. 

    Return it and get your money back. Virgin does not offer official unlocking, thus there's no way to get the phone officially unlocked for you to use it.
    Sorry, but you wasted your money.

  • Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

    hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

    Yes pretty much that, but to clarify sorry
    Opened Lightroom.
    Create new catalogue.
    This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
    I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
    In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

  • HT1918 Itunes store will not let me use the money on my account. It wants to make me use a credit card. I have already redeemed a card yet it does not see it. What's the problem?

    Itunes store will not let me use the money on my account. It wants to make me use a credit card. I have already redeemed a card yet it does not see it. What's the problem?

    Some Purchase require a Credit Card... For example Gifting and In-App Purchases.

  • Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    You don't see drives when using a hardware RAID only the volumes.
    WD Green are not suitable for hardware RAID (or software RAID for that matter).
    USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
    I can't say I begin to understand your use or "choosing the install drive for the backup"
    Install what?
    You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
    You read FAQ and How To http://www.apple.com/support/timemachine
    Time Machine’s Gory Details:
    https://www.apple.com/support/timemachine/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Lion Recovry & TimeMachine
    http://www.apple.com/support/lion/installrecovery/
    http://www.apple.com/support/lion/
    How To Restore Your System
    http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
    Pondini's Blog: Time Machine - Troubleshooting -- B5.  Would you like to inherit (or re-use) the backup . . . ?

Maybe you are looking for

  • Somehow when updating my Pinterest App the whole App disappeared.  I can't get it back nor open the update

    What do I do to get it back?

  • Query Engine Error:

    Post Author: swordfish8 CA Forum: General Hi, Many thank for taking the time to read this thread, the web application work on development box but fails when deployed. Please help, the problem is detailed below, cheers, Praveen Developed Environment W

  • How do I recover my corrupted iPhoto '11 library?

    I tried to open iPhoto '11 and all I get is the spinning beach ball of death. I've forced quit three or four times, corrected file permissions, and bought iPhoto Library Manager...all to no avail. Can anyoen suggest what I shoulod do next please?

  • HSODBC.EXE Performance

    I'm testing HS performance between our Oracle(NT) servers and AS/400. A query that takes 3 seconds on our Dev server takes 30+ seconds on our Prod server. I can't find anything different between the two environments, here is a list of everything I've

  • Hunt Pilot / Pickup Group

    I have a scenario that is giving me a problem with pickup groups and I need some assistance. I have 3 extensions (1410, 1411 & 1412) that are part of a pickup group. That pickup group works fine. However, we have an after hours line group with a hunt