Nothing was selected  Massage runing F.5E

Hi All,
When I run the F.5E that time system give the massage "Nothing was selected"
How to rectify this massage please suggest me.
Regards,
Seema
Edited by: seemacg on Jun 28, 2011 1:48 PM

Hi Nikolas,
Yes the massage is correct.
Regards,
seema
Edited by: seemacg on Jul 4, 2011 7:49 AM

Similar Messages

  • F.5E message- nothing was selected

    Dear all,
    Executed F.5E for the month of Junu201909 and generated a batch session, processed (foreground) the same in SM35,  system prompted an error msg: Period not open,  simultaneously we have opened the GL Account Posting Period _OB52 and tried to process the batch, system still throwing error message, so we thought of stopping the batch session,,, as system is not allowing to do so, we have forcibly come out of the session u201C/nu201D then again checked in SM35, the status is showing as still processing,,, we have deleted the session,
    Now the problem has come,,, again we have tried to execute F.5E for the month of Junu201909 after calculating F.5D, system prompting a msg: nothing was selected,,,
    - Can we post balance sheet adjustment for the same period more than one time, if so where are we going wrong? Please let us know how to overcome this message: nothing was selected.
    regards,
    Kumar

    Hello Kumar
    This is a common problem which users often do.
    Normally what happens is when you run f.5E, system first stores the run id and run date in a particular date. the second step of the program is to post entries. Now when you have created the batch run and executed it, the system should have stored run id and date details but since you abrutly deledt the job the second task  was not carried out.
    now if you try to rerun the program system checks wether ther run id and run date have been store for a particular run and since it finds it, it is givin you a message" nothing was selected".
    To overcome this problem you have to run t-code F.5G. The run details are normally stored in Table RF180. when you run T-code F.5g is would reverse the entry stored in this table. Please note that F.5G does not automatically reverses any transaction entries posted by system. the last run in the system is reversed first.
    Please do the needful.
    1. check if transaction entries are posted, if any reverse the accounting docs manually.
    2. Use t-code F.5g. check whether the system is selcting the write run to be reversed, you can check the time and date for run to be reversed.
    3. once you execute f.5g  you would be able to run F.5E again for your balance sheet adjustments.
    Thanks
    Sanjeev

  • Can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type.

    Can someone help. I use Photoshop Elements 13. I can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type. It started this a couple of weeks ago and I had a friend come fix it just 2 days ago. It took him several hours and I lost all tags I had on over 10,000 pictures. Now it has done it again. I'm so upset. I lost a lot of stuff. I don't want to keep bothering him with this. Please Help.

    How did you import the files to your computer?
    What model  number camera?

  • Hello, Just bought a new camera and tried to load the CF card containing Raw files on both the Mac and the windows computer and get error message telling me nothing was imported. The files or folders selected  to import did not containany supported file t

    Hello, Just bought a new camera, Tried to import files to elements 12 on the Mac and Elements 10 on Windows... Both computers I get error message:Nothing was imported. Files or folders selected did not contain any supported files... They are Raw (new) files.. It is the only files I had ever imported and it has always imported them in the past.. What could have changed?

    Hi Daytrip589,
    Just wondering if you're situation has been resolved. I have a similar problem with PSE 11, getting the message about nothing was imported. I shoot RAW, have imported with this camera before ( a Canon G15) but couldn't the last time I tried. Cheers, Glenn.

  • Verify SCXI chassis: Configurat​ion specifies a SCXI -1600 module but nothing was detected

    Hello NI Engineer,
    I am using SCXI 1001 chassis with SCXI 1600 control module, SCXI 1520 signal conditioning module and SCXI 1314 connector block to acquire data from strain gage. Once I right clicked SCXI 1001 under device and Interfaces in MAX>> test>>I found a pop up window as “Verify SCXI chassis: Configuration specifies a SCXI -1600 module but nothing was detected”.
    This is what I did.  I connected wires from strain gage to SCXI 1314 connector block which is then connected to SCXI 1520, placed in chassis. I connected SCXI 1600 controller module to computer using a USB 2.0 cable. As soon as I switched on chassis, I found a pop up at task bar as “SCXI 1600 is detected”. I opened MAX and right clicked NI SCXI -1001 under devices and interfaces>> Properties>>selected the accessory under module tab and got “Configuration complete” message at top of pop  up window, But once I right clicked NI SCXI 1001 >> test >> I found an error as mentioned above. Also once I right clicked NI SCXI 1520, under NI SCXI 1001>> Configure TEDS>> I was not able to click scan for HW TEDS option (i.e. It’s not shown up). How to overcome these two errors? Please help me. I also attached screen shots with this. I am using windows XP.
    Thanks
    Dhaya.
    Attachments:
    Error pic 1.JPG ‏115 KB
    Error pic.JPG ‏97 KB

    Hi Dhaya,
    You seems in the correct direction to configure the SCXI hardware. There is nothing to test on the SCXI-1001 chassis instead you can test on the individual channels inside the SCXI. SCXI 1600 will auto detect the modules inside the SCXI Chassis and display it in MAX. The next step that you may need to do is to configure the Accessories (Connector Block) that is attached to the SCXI-1520 mentioned.
    Once you configure the connector block, you should be able to test SCXI-1520 channel.
    In regards to TEDS, Are you using SCXI-1314T connector block (http://sine.ni.com/nips/cds/view/p/lang/en/nid/137​35) which is for TEDS sensors?
    I hope that this helps
    - Meadow -
    LabVIEW 7.0 - 2011, Vision, RT, FPGA
    TestStand 3.0 - 4.5

  • I'm getting this error after I edit photos 'nothing was imported. What is causing this?

    I'm getting this error after I edit photos 'nothing was imported. the files or folder selected to import did not contain any supported file types, or files are already in this catalog.I have elements 13 using hp windows 8 laptop and never had this happen before.

    Hello staceonbass,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • [AS, CS2 / CS3] Get Fill Color When Nothing is Selected (defaults? preferences?)

    Hi,
    where can I find the active color, which is active (border and fill color), when nothing is selected.
    E.g. I can get the active styles, when nothing is selected with:
    applied character style of text defaults
    and
    applied paragraph style of text defaults.
    Where nac I find the equivalent for fill and border color?
    Thanks
    Tobias

    Thanks, that was for CS3. Where can I get that in CS2?
    I searched the dictionary of document and application, but got no glue ...
    Thanks
    Tobias

  • Question why does 1 row(s) inserted display even though nothing was inserte

    My question is when I run the below code in the sql workshop/sql command even though the insert statement is commented out. I still get the following message:
    1 row(s) inserted.
    Why? I check the table and I can seel that nothing was inserted. So why do I get the message 1 row(s) inserted.
    I will be running this on an apex form. Should I worry about this?
    Howard
    declare
         getFm411ID number;
    distCount number;
    begin
    select count(*) into distCount from test where no = :P_NO and active = 'A';
    if distCount > 0 then
    -- insert into tbl_test(fm411_id,dist_id) values (getFm411ID,my411dist.dist_id);
    dbms_output.put_line('test');
    end if;
    end;

    It is a dummy message, and no need to worry about it.
    begin
      null;
      -- insert into no_such_table (x) values ('a');
    end;The above dummy code produces "1 row(s) inserted" message.
    Ravi

  • Question: Need help with overcoming the following message:  "Nothing was imported.

    Need help with overcoming the following message:  “Nothing was imported.  The file(s) or folder(s) selection to import did not contain any supported file types, or the files are already in this catalogue”.
    The photos being scanned are old film shots.  They have NOT been previously scanned.  I am using Photoshop Elements 9 software.
    QUESTION:  how do I override this STOP and or circumvent the photo comparison option????
    Thanks for the help. Bob K ---  [email protected]

      Are you scanning as jpeg, tiff or some other format?
    Are you using continuous numbering for files names as by definition scanned files have no exif data.
     

  • PSE 11 message "Nothing was imported"

    Hi,
    I'm having a problem. When I try to import images ( directly off my camera - Canon G15 )  it appears the files are being transferred  but I get this message saying " Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this catalog." "Reason: the file is damaged or is in a format that cannot be included in Elements Organizer". I've never had happen before, in fact, photos from my Canon 5D Mk 2 download into Organizer as they should. I'm running Windows 7 Pro 64 bit, PSE 11. My photos are in RAW ( CR2 ) format. Movies from the G15 are in MOV format and they imported OK, only the photos are not. I had a problem with my computer a month ago & Windows was reinstalled. Prior to this time I've never had a problem importing files. Tried reinstalling Photoshop Elements & Premiere Elements but that didn't help. My software is up to date, I have ACR 7.4. I have 2 SD cards of photos with this problem & have not tried using another card to test it. Any suggestions would be appreciated. Thanks, Glenn. 

    Hi MichelBParis,
    Thanks for the response. I checked again last week, and this time noticed I downloaded the files several times from my Canon G15.  Don't know how I missed it originally, maybe looking for 5D Mk 2 files in error. Anyways, thanks again. Cheers, Glenn.

  • F4IF_INT_TABLE_VALUE_REQUEST - what line was selected from list displayed

    I am building an internal table and displaying it as search help using F4IF_INT_TABLE_VALUE_REQUEST.  How can I tell what line was selected from the search help?  Only one field is filled with the selection, but there are several other fields attached to this that I need in my program - but I can't tell which line was selected, and the one field is not enough information to use to get the record from the internal table.

    Hi,
    RETURN_TAB would have the selected values.
    FIELD_TAB will have the hit list fields.
    DYNPFLD_MAPPING will have the Assignment of the screen fields to the internal table.
    Regards,

  • HT3275 I have attached an external hard drive via usb to back up my OSX Snow Leopard.  When I open Time Machine and click set up time machine, I then click Select Disk but there is nothing to select. No information is in the box. I do have Airport Extreme

    Not sure how this all works but my problem is this:  I have attached an external hard drive to my mac snow leopard 10.6 and am trying to back up my computer through Time Machine.  When asked to select the drive as part of the set up, there is nothing to select.  The box is empty. How do I set up Time Machine for back ups with an external drive? I am running Airport Extreme WI-FI (VERY confusing as I did not know the difference between Extreme and Capsule).  Now to add another component...how does Icloud figure into all of this if I want to back up my computer systems, documents, etc?  Is this a simplier way as long as I download Lion?  Help!!!

    Hello,
    Problem is likely the Format of the External drive, for TM it needs to be Mac OSX extended Journaled & GUID Partition scheme for Intel based Macs...
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html
    There are other free options for backing up if interested!

  • 'No action was selected.' error when submitting a form

    I have been having problems getting a form to initiate my workflow process. I open the form in the form manager, fill it out, hit the submit button and get the following error: "No action was selected. Your data has been saved in your drafts folder. Open the work item again, select an action, and resubmit the form"
    What makes this issue especially tough to debug is that the workflow server appears to be caching the error. For instance, I start with a simple form invoking a simple workflow -> that works. I then change the InitForm to use the real form (complex) and I get the error. If I switch back to the simple form, the error persists. The only way that I can get back to a working combination is to create a new simple workflow and simple form from scratch (and that does not always work). Does anyone have a suggestion for the "no action was selected" error, or for the strange caching that appears to be happening with the workflow server?
    Thanks in advance
    Chris

    All,
    This appears to be an issue with Forms 7.1.
    From Adobe Support:
    "Under normal circumstances, if you take Workflow out of the picture and submit data from a PDF form that has a schema associated to it, the submitted data will conform exactly to the schema. So if you have
    fields on the form that don't correspond to nodes in the schema the data for those fields will not be submitted. However, when you add
    Workflow into the picture, the data for the workflow fields MUST be
    submitted regardless of whether they are in the schema or not because
    it's essential for things to work. Those nodes get removed from the DOM at a later time so that the data that's in your form process variable will conform to the schema. With LC Forms 7.0.1 installed this is working fine and all the Workflow fields are passed on fine. With LC Forms 7.1 installed, all the Workflow fields get submitted except for the AWS_ACTION field. Which is why Form Manager then complains that no action was selected."
    Workarounds:
    1) Don't supply Choice List options for the init form in the workflow
    2) Don't associate your form with a schema
    3) Add an element into your schema for AWS_ACTION of type xsd:string
    such that it will be submitted along with the rest of the data.
    Option #3 worked for me, and fixed my issue.
    Chris

  • HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Identifying which line was selected from a WebDynpro table

    Hi,
    can any one give me some advice, I've created a view which displays a table of filenames, which in fact are "LinkToAction" columns. The idea was that when a filename(LinkToAction) was selected, I could retrieve the appropriate file from the Applicatio server and Open the file in Excel or Save as Excel. My problem is, when I select a filename I don't know how to identify what line was selected in the table. Any advice would be great.
    Thanks,
    C

    Hi , Just identify its element which is lead selected and read attribut of that element .
    Have the code for the same
    DATA:
        node_nd_worlflow                    TYPE REF TO if_wd_context_node,
        elem_nd_worlflow                    TYPE REF TO if_wd_context_element,
        stru_nd_worlflow                    TYPE wd_this->element_nd_worlflow ,
        lead_selection_index                TYPE i,
        relation_no                         TYPE guid_32.
    navigate from <CONTEXT> to <ND_WORLFLOW> via lead selection
      node_nd_worlflow = wd_context->get_child_node( name = wd_this->wdctx_nd_worlflow ).
    @TODO handle not set lead selection
      IF ( node_nd_worlflow IS INITIAL ).
      ENDIF.
    get element via lead selection
      lead_selection_index = node_nd_worlflow->get_lead_selection_index( ).
      elem_nd_worlflow = node_nd_worlflow->get_element( index = lead_selection_index ).
    elem_nd_worlflow->get_static_attributes( IMPORTING static_attributes = stru_nd_worlflow ).
    Cheers
    Parry

Maybe you are looking for