Notifications and control panel do not work on either the app screen or home screen

On my home screen and in apps, I can not swipe up or down to release the notifications or control panel. It has worked earlier today, however not any more.
I can, however, access them in the lock screen, andin settings, they are allows to open in apps. It should always allow me to access them in the home screen though, so I do not know what has happened.
What do I have to do to access the control panel in the home screen, and why is it like this?

Do you have a screen protector or case that would interfere with swiping?
If so remove them as a test.
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

TS1702 When I purchase an iPhone app and it clearly does not work even thought the app web site clearly says it *does* work with a particular device, what is the refund policy?

Downloaded and installed uCamPro - if found my cams easliy enought but can't get get images to display. UCamPro website lists my cams (WVC54GCCA) as *supported types under Linksys "common" profiles. Anyone have issues? Support is not very quick on replies so far ... still trying with them...
Any assitance appreciated.
Thx.

Try contacting the store support staff at http://www.apple.com/emea/support/itunes/contact.html

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Tab and control buttons do not work in Firefox (they work in other browsers) AND I switched to a new keyboard.

The tab and control buttons are not working the Firefox browser (My browser is up-to-date). The buttons work in IE and Chrome, however, before I realized that, I even switched out my keyboard to a brand new one hoping it would solve the issue.

Thank you--there were a few random extensions I had not added (spyware, maybe?). Once I removed those the issue was fixed!

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening. I'm with Sprint if that makes any difference.

Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening. I'm with Sprint if that makes any difference.

Are you in an area where there is no coverage?
You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
If that doesn't help, then yOu'll need to contact Sprint again.

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

I just loaded the new version of iTunes on the PC and now iTunes will not sync with either the iPod or iPhone. Any suggestions

I just loaded the new version of iTunes on my PC and now iTunes will not sync with either the iPod or iPhone. Any suggestions

Hello there, Duane Harris.
The following Knowledge Base article provides in-depth troubleshooting steps for resolving your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Beware: icloud control panel DOES NOT WORK for icloud email

Opposing evidence is welcome. Please comment.
After dozens of hours, emails and chat sessions with both MS and Apple tech support (the latter escalated as high as it could go - "after this we have to refer you to engineering"), I was finally told by Apple Senior Advisor Ciara Ferguson that icloud control panel does not properly sync icloud mail with Outlook 365 (Outlook 2013). After several months of working on dual systems I discovered that many (but not all) changes to folder names and filing of emails in various folders made in Outlook were not reflected on icloud and vice versa. Ms. Ferguson has stated that icloud control panel "works better with calendar and contacts." Obviously, this non-committal statement is grossly insufficient. It either works or it doesn't. It doesn't.
Allegedly, icloud control panel does work to sync other email (the example of an outlook.com email address was given) into apple devices. This doesn't sound right to me either, since one can just add any POP or IMAP or Exchange account into a Mac device, so why would one need icloud control panel to interface?
I remain stymied as to the actual purpose of icloud control panel, despite asking exactly that question of Ms. Ferguson on several occasions. The Apple literature and its own setup screens suggest that it will sync email, contacts, calendar and notes with MS Outlook, but as to email, that is apparently untrue.

I don't think so. I'd like to sync photostream from two iPhones with distinct Apple IDs on our PCs and I don't see a way to do it. It synced my wife's iPhone while she was logged in to iCloud control panel but not mine until I logged in (and disconnected her photostream PC syncing).

Why did iso7.1.1 change the ability to see your apps when you use four fingers to partly close the app your in. In 7.1 you could use four fingers to partly close a app and see all the apps on that home screen. I used this all the time to check the date

Why did ISO 7.1.1 change the feature where you could use four fingers to close an app and see if he other apps on your home screen as you were closing an app. This was the handiest feature I thought because I could partially close the app I was working in and see the date or other things on my home screen and then released the four finger position and be right back to the app I'm working in. Please change this in the next update back to the way it was!!!!!

I get the multitasking list (all prior apps, scrollable) and can switch to an app, swipe up to force it closed instead of "at rest" and can click back to the originating app in the same place i was prior to the swipe,

Palettes, toolbar, and control panel don't work in CS3?

I can't select pages from the "Pages Palette" or add or delete pages from the same palette. All of the palettes are having similar issues (i.e. Pages, Info, Layers, Links, Stroke, Swatches, Object Styles, Color, Effects, Gradient, Character Character Styles, Paragraph, Paragraph Styles, etc.) They are just unusable. Most of the toolbar work except for the selection tool which I can only activate by pressing (V). The control panel seems to be having the same issue. I've tried reinstalling and repairing the install on the entire CS3 package. I've tried reinstalling and repairing the install on just InDesign. Photoshop CS3, Acrobat, and Illustrator work fine....not sure about Dreamweaver, Flash, and the others.I've downloaded and installed all available updates for CS3 from Adobe's site.
Any thoughts?
Running on:
Windows Vista Home Premium 32-bit
Service Pack 2
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00Hz
2.00 GB RAM

See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

Windows Update from COntrol Panel does not work??

Hello,
regardless if it is common way to do so or not: Does anyone have experience with the "Windows Update" functions in WE8S?
I tried them upon a customers request, and I've seen that I could not get it to complete successfully when choosing the option in
Control Panel. It either hanged during "Downloading..." or at the "Preparing to install..." screen - I waited for many hours. But when I using the "Windows Update"
app from the start screen, updates were installed without any problems (OK, 1 has failed, but the process has completed). Of course, both methods have different look, maybe it is not the
same...
As per Sean Limings' book it is no good idea to update systems in the field this way - shall I remove the functions from the system? What are you doing?
Thanks,
Willi K.

Maybe it was because of the number of updates (in my case there were 85 updates pending). After I succeeded installing via the "Windows Update" app from "Start Menu", there where two more updates, and update now worked when called from
control panel (at least one of them, KB2973201 still stolidly fails to install).

Icloud control panel photostream not working on windows

Using windows 7 i set up photostream to hsare the photos taken on my iphone/ipad. all worked for a while, but, have stopped now. Photo are not loading onto the PC. When i go to the control panel I also note the options buttom beside photostream is inactive (meaning i cannot check what folders have been set up). I suspect this came about during an update of versions as all was previosuly working just fine.

Greeting!
This message will show up when the printer receive the print job, tried 3 times but fail to pick up the paper.
To clear this message, you might need to
1. disconnect your printer from PC
2. restart(power cycle) the printer
3. obserb the printer status and let me know. if the printer give ready status, restart your pc and connect back the printer to PC.
Although I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the thumbs up in the post that helped you.

Since Win8.1 update NVIDIA control panel is not working

Since updating op system to Win 8.1, I am not able to get into the Nvidea control panel. I get a message that no displays are connected. I have got the Nvidea card as my primary source for the monitor.
Help appreciated.

I guess you read the step by step instruction how to update the system from Win 8 to Win 8.1
Did you? Did you follow such instruction?
Did you update and install the essential nVidia driver for Win 8.1 which is available on Toshiba driver website?
If not, do that!

My iPhone 4s is having troubles with the Nike app. It appears greyed out on my settings screen & when I finally am able to see the app on my home screen it crashes within a few seconds. I have tried all the Apple suggested solutions and they do not work.

I have tried reseting my phone many different ways and updating all the software. Nothing works the app continues to crash. Apple says in another thread to someone else to follow third party app solutions but those do not work as you cannot delete and re-download a pre-loaded Apple app...... Any help would be necessary as I just bought the sensor from Apple, and now my phone won't connect.
Seems like a waste of money, since the products are made by the exact same company I expect them to work. I have also noticed that other people have had this problem and have also been unable to solve it.

I've been facing the very same issue for 3 days. Did you figure it out?

Notifications and control panel do not work on either the app screen or home screen

Similar Messages

Maybe you are looking for