Notifications from IDoc processing not working right

I am having a problem where the IDoc error notifications are appearing in everyone's inboxes. I followed the instructions in SAP notes 44416 & 116610. If the tasks are set as general tasks, they go to everyone. If they are not general tasks, they go to no one. I checked the rule resolution for the tasks and they are resolving to the proper organization unit. Any ideas?

The changes only apply to new errors.

Similar Messages

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

T42 keyboard not working right, HELP PLEASE

My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AM

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

Messages from IDoc processing can be found in application log

We are using the IDOC_INPUT_INVOIC_MRM Function Module to post Inbound Vendor EDI Invoices. During testing, we sometimes see the error "Messages from IDoc processing can be found in application log". We then have to check transaction SLG1 to ascertain the 'real' issue, e.g. "No GR documents found". In a Production environment however, this will be very inconvenient. Our business users process their own iDoc errors according to the iDoc Status, so to have to call up another transaction, and select the correct Application Log to find the true error, is not a process I would feel comfortable with for our users.
My question is, can we configure/determine which messages are passed to the iDoc Status, or redirect Application Log messages ? Might a Z version of FM IDOC_INPUT_INVOIC_MRM be the way forward ?
Many thanks,
Paul.

Hi,
Just monitor your error idocs in WE20 transaction. Give idoc number here then execute, you can see the all three records(control, data, status). Click on status record node then double click
on status number(e.g 51), it will take you to another screen there you click on "application log" button on application toolbar. This is the standard way finding the application log of an idoc, even i am finding the application log on production server like this.
Thanks,
Asit Purbey.

LR2 to PS CS3 roundtrip not working right

I am sorry, but from where I am standing Adobe screwed up big.
In the first place, LR 2 is very slow on my MACPRO with 4 gigs, as slow as Aperture 1.5 was and was what made me switch from Aperture to Lightroom.
In the second place, PS roundtrip is not working right. LR2 sends the image to PS when I select edit in, but after I finish with the file in PS and close and save, the new file does not show up in LR 2. It is in the folder but not in the catalog. I either have to re-import the image or sync the folder. On either case, it is not stacked with the original.
What's up??
Is there a setting or something? or just a big screw up from Adobe? Why isn't Adobe addressing this issues in public?

I am having the same problem with lr2. Mine will not round trip. It goes to CS3 but will not come back when saved in CS3. Strange thing is, after having LR2 since day one of release it did round trip a few times yesterday but today it is back to its habit of no round trip.
At times LR2 is slow and the brush tool is mostly unusable since it is so slow. Also sliders are very sticky.
If the Adobe boys and girls can get it working soon LR2 is great and I feel it has increased my quality.
Bob Kuprion

TS1368 My Itunes match is not working right, it was only able to download 50% of my songs and now I can't play the balance songs.. it's so stupid

My Itunes match is not working right, it was only able to download 50% of my songs and now I can't play the balance songs.. it has messed up my enitre music library

Hello Carpathianna,
No judgment here on the music you listen to, I have that song too in my library. If iTunes is telling you that the song is missing and you purchased it from the iTunes Store, then just delete it from your iTunes library and then download your song again. Check out the articles below for more information.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes.

Hp advisor not working right

I have a laptop HP HDX X16T-1200 CTO PREMIUM NOTEBOOK PC and it has two problems
first one COMPUTER WON'T DO SYSTEM RESTORE TO AN EARLIER TIME, I have a lot of restore points
second one HP ADVISOR IS NOT WORKING RIGHT, I open the dashboard and everything starts working but security part keep saying it's initializing, at the same time I get a little message that says hp advisor has a problem windows is checking for a solution but so far a did not get any solution.
Can somebody help please

Going back to a restore point can be problematic if you are using Norton. It has tamper protection setting among others that cause the Windows ssytem restore point process to fail.
What version of HP Advisor are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

My keyboard does not work right how can i fix it

I have the iphone4 I bought from Verizon about 2 months ago and now my key board will not work right how do I fix this? I have tried to reset factory settings and all of that but it did not work! If I can not fix it my self will Verizon send me a new one ?

That's a very important component of your phone, tiffanymoyle. Let's see what we can do to get your keyboard back up and running correctly. What issues are you encountering with the keyboard? Do certain letters not register when pressed? Does it make a difference if you turn your phone to function in landscape mode?
NicandroN_VZW
Follow us on twitter @VZWSupport

TS3376 After I opened find my iphone app, it erased everything on my ipod and now it is not working right. How do I fix this?

After I turned the "find my iphone" app on to locate my daughters ipod from my iphone, it erased everything on her ipod. Now it is not working right. How can I fix this?

Welcome to the Apple Community.
Restore it from a back up.

Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

Hello,
I would like to ask a question, hopeing it is resolved in some way and i missed it.
I have installed SP3 Rollup 4 on our Exchange 2010 server.
This added 2 new Powershell commands
Get-MailboxSentItemsConfiguration
Set-MailboxSentItemsConfiguration
This can be used to manipulate where mail is stored in the send items.
Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
What we really want it to use the From only way.
We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
Here is is stated on 1 July 2013
http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
That was on 26 March 2013
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
Looking foward to any replies.
Kind regards,
Jeroen van Velzen

I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
but the other does.
If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
the shared mailbox you will see it in Deleted items folder of the shared mailbox.
The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
This was accomplished without using the Set-MailboxSentItemsConfiguration command.
We are running Exchange 2010 SP3 RU4.

Help, my iPod's not working right.

Help. I unfortunately downloaded iOS 6.0 to my iPod touch and now it's not working right. I can't listen to anything in the itunes store and a song I tried to download doesn't work on my iPod, yet it works on my computer. Is there anyway to go back to the old OS system I had before this one? Is this happening to anyone else? What can I do?

You are very welcome!
It would seem that the problem was that you were not logged into your iTunes account on your device, and logging in fixed it.
That is great! You did well in your troubleshooting. I'm glad you got it fixed. Sometimes, just messing around with it, trying to figure it out helps.
As for updating, it would be good to do as I suggested, but I don't know what Apple's next update will hold for our devices. Whether it will fix only some, or all of the problems. So I would say that keeping an eye out, maybe on this forum, for results of the next update, whether or not it helped others, and how much it fixed. It may even take a few more updates for it to come back around to working as it should. Once your device doesn't seem to be full of errors and bugs, (and maybe the Apple forums are full of positive reviews) then you can stop updating. I'm not saying that updates are always bad, it is hard to tell. So if your comfortable with how your device is working, then you can choose to ignore future updates, it's your choice. I don't know when the updates are coming out either, so we are all riding it and seeing how it will turn out.
You can mark this discussion as solved if you want.
If in the future you have some questions, you can dig up your notification emails that were sent to notify you of these posts (if you keep them) and navigate back to this discussion and make a post. Because I am subscribed to this post too, so if you do make a post in this discussion, I will be notified.
I'm glad everything worked out, I am always happy to help.
Thank you for being precise and clear in your questions and results. (And the great grammar, it's so rare!)
Sincerely Lt. Leviathan

Just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

[Quote]
Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts. I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
[/Quote]
Well I found nothing wrong in your post. So why even make a statement like the quote I included?
Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
No bashing, no adversarial post just a little common sense is all I use.
And again your post was great.
Good Luck

Notifications from IDoc processing not working right

Similar Messages

Maybe you are looking for