Notiifcation Long text not grey out

Guru
I have seen the Notification Long text screen grey out once the user saves and log out. When next user enters he wil not b able to chnage the contents entered by previous user.
This is not actually hapening in my case...The screen and info entered doesnt grey out and the user can change it easily with no change documents generated,
Please help me achieve this. I need the field to be grey out once it is enterd and user has loggeds out. System shoud show the log-in user name and time when saved.
Please reply soon..

Hello
Please check in spro
Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Notifications>Notification Creation>Notification Types-->Define Long Text Control for Notification Types
Check the below Check Box is Marked for That notification type
Log Line
No Text Change change
If above setting is already done then run Notication Transction again go in long text of Notification then after that Run transction code SU53 check your authorisation weather you have right authorisation obejct assign to you.
Regards,
Rakesh

Similar Messages

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

Hierarchy Authorization field not greyed out in portal

Hello Gurus,,
I have a query,which has profit center as one of the selection variable and which has a a hierarchy on it. The Analysis authorization variable was created for the hierarchy. So it works fine in Bex Analyser,but when the same is run in portal,,, the authrozation field ( profit center) is not greyed out,but the F4 help shows just the authorized values alone ,which is good. But the issue is the enduser seems to be entering values manually,,,thereby the report runs for unauthorized values as well.
Can someone tell me,,if this could be a bug in sap,,, the field with authorization is
not being greyed out.,,,,,,,,is there any work around because the user wants it optional,,,,,,,
This is on 2004S version of BW.,,,,,,,,,,,,,,can someone guide me through this.....
Just to confirm,,only the nodes show in F4,,but is it standard functionality that the leafs doesn't show up in F4,when a leaf alone is selected as the hierarchy node in RSECADMIN................
your help shall be rewarded,,,
thank you in advance..
srinu

Hi
Thanks for ur advice.
I have tried what you said by activating and Deactivatin the RFC comm channel in ID but the same result.
I have also checked the Max connections in the RFC channel.
All in vain
Expecting more expert suggestions
Regards
krishna

Include updated website lists from Microsoft - Not greyed out

Hi,
As per description of the Group Policy setting "Include updated website lists from Microsoft" on GPMC console, by disabling this setting, the Microsft-provided lists are not used and the user will not be able to activate the feature.
If you disable the setting under "Policies\Windows Components\Internet Explorer\Compatibility View\Include updated Web site lists from Microsoft" the checkbox is detached but it is not greyed out.
I have tried to set the policy under Computer Settings, User setting and also making a Registry edition under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\BrowserEmulation by setting "MSCompatibilityMode" to "1" but the behaviour
is still not the desired.
Does anybody know if there is any way to grey out this setting?

Hi,
This policy controls the website compatibility lists that Microsoft provides. The updated website lists are available on Windows Update.
If you enable this policy setting, the Microsoft-provided website lists are used during browser navigation. If a user visits a site on the compatibility lists, the pages are automatically displayed in Compatibility View.
If you disable this policy setting, the Microsoft-provided website lists are not used. Additionally, the user cannot activate the feature by using the Compatibility View Settings dialog box.
If you do not configure this policy setting, the Microsoft-provided website lists are not active. The user can activate the feature by using the Compatibility View Settings dialog box
my comments:
the check for updates to the MSCVL is done the FIRST time the iexplore.exe process is started...
Try rebooting the computer or closing all open IE processes to see if the changes have taken effect.
Check if you have installed and activated Enterprise Mode which will over-ride any MSCVL settings.
Please provide a link to the website where you are seeing the 'undesired' behavior....
the google Plus web page plugin can change outcomes for x-ua meta determination.
Regards.
Rob^_^

Routing Long text not populated using LSMW

I need help with the ROUTING LONG TEXT using LSMW. I'm using the standard LSMW direct input program /SAPDMC/SAP_LSMW_IMP . I'm confused with NAME field while loading the data. I have tried to create the routing long text manually after successful creation i opened the Longtext at header screen and opened GOTO--> HEADER there i have seen TEXT NAME is constructed based on CLIENT || N || GROUP || GROUPCOUNTER || INTERNAL_COUNTER (CLIENT||N||PLNTY||PLNNR||PLNAL||ZAEHL - field names) I used the same logic to construct the test data for another routings which were created and doesn't have the long text. I have run the lsmw program and executed successfully but when i open the routing in CA03 i dont see the long text populated.
Test data used looks like this:
OBJECT NAME TDID SPRAS TEXTFORM TEXTLINE
ROUTING N500000890100000001 PLKO E * THIS IS A TEST1
ROUTING N500000890100000001 PLKO E * THIS IS A TEST2
ROUTING N500000890100000001 PLKO E * THIS IS LINE3
ROUTING N500000910100000001 PLKO E * LONGTEXT1
ROUTING N500000910100000001 PLKO E * LONGTEXT2
My question here is do i need to construct the NAME as i have mentioned above or do i need to just send the Routing Group number into the file for the NAME field. Help me understand what do i need to populate into NAME field.
Please help with the mistake i have done.
Pretty much appriectiated for your replies.

You asked the same question in two different forums multiple times:
Standard LSMW to load Routing Long text
Re: LSMW : Long text not visible after the import of data
Please use same one thread for one question.
I gave you most of the needed information assuming you know how to do LSMW in the first thread itself.
You need to have the following fields in your source structure in addition to other fields like long text
MANDT
PLNTY
PLNNR
PLNAL
ZAEHL
In the step Maintain Field Mapping and Conversion Rules assign the source field MANDT to the variable NAME and then again place the cursor on the variable NAME and assign variable PLNTY, (now you have two source field assigned to same variable) similarly assign all the remaining 3 source fields PLNNR, PLNAL, ZAEHL. (now you have 5 source field assigned to same variable).
Now select the variable NAME by placing the cursor click on Rule (Insert Rule) and select the radio button Concatenation .
Make sure that in your input file you have leading zeros for PLNNR PLNAL and ZAEHL etc. like below
50000089, 01, 00000001
Also, you don't need maintain the value of OBJECT, TDID, SPRAS, TEXTFORM as source fields. You can directly maintain them as constants in Maintain Field Mapping and Conversion Rules by click on the push button Rule .

Alert : long text not complete

Hi all,
I manage specific alerts in my BPM.
I have defined it as "dynamic text" alerts in ALRTCATDEF.
These alerts are well thrown by PI however I can see only the first caracter of the long text.
My version is PI 7.0 SP8.
Is it a known issue ?
Thanks in advance,
J.C.

Hi JC,
This may not be an issue at all...and just the way alerts are shown in the inbox.
Just right click on the table cell where you see the first character of the text, right click and select "view source".
You should be able to see the long text within the HTML source.
Though not a solution but this can be used to test out the alert.
Regards
Gaurav
PS: Please reward points for helpful answers.

Alert long text not visible

Hello,
I have a problem triggering an alert with dynamic text out of a bpm. The alert is triggered correctly (I can't see any dump in tzhe log files), I can see the alert in my alert inbox, but the long text isn't filled. I'm using SAP Netweaver 2004s SP 9 (SAP Basis 7.00).
Then I tried the same preocedure in a SAP Netweaver 2004 SP 15 (SAP Basis 6.40) with the same settings, and it worked fine. I can see the long message in the alert inbox. The only differnce was, that in 2004s the alert classification 'Webflow Alert' didn't exist, so I had to create it.
Does anybody know, where the problem could be?
Thanks,
Thomas

Hi,
Just check that the length of the message is not more then the required limit. If thats the case it sometimes does not show the message.
Else, just try re-activating that step again by making some dummy chnages.
This problem happens at times when you are using dynamic variables .
Regards
Vijaya

Operation long text not coming in print priview of maintenance order

Hi Experts,
I am facing problem in getting the long text of operation of maintenance order( generated from maintenance plan) in the print preview because of which long text of opeartion is not showing in the print out of order but other things are coming in the printout except the long text.This is happening for the first time.Earlier long text was coming in the print of order.Can anybody suggest the possible cause behind this & solution for this problem asap.
Thanks.

Hello,
Please check The IP30 batch job schedule in which LOG IN language it is schedulde for those manitenance plan.If same it is diffrent what as Long text language then it will not come in Ordre OpRN long text.
Reagrds,
Rakesh
Edited by: RAKESH ASHOK MANE on Aug 18, 2010 3:46 PM

Include CD Text turned grey-out

Oddity, I burn one cd, it includes CD Text, I'm able to select include cd text, fun stuff. I burn a lightscribe label for the disc [through SureThing, subsequently installed Nero]. Plopped the CD into my PS3, cd text recogonized, much fun.
Burn a second cd. Plopped into PS3, no cd text detected, swapped back to iTunes, and it seems the Include CD Text option on that device is now grayed out. The other burner in the system can still select it.
Have yet to attempt another burn until I dig up a cd-rw to test with. That, and they're burns for protected content, so I hopefully reasonably don't want to be burning through my 7 burn attempts debugging .
HP DVD Writer 740b [drive that's now greyed out, the primary burning drive]
LITE-ON DVDRW SOHW-1633S [drive that lets me select CD Text, however, it doesn't appear to persist between itunes sessions]

Okie, consider me confused now. Tested the 'good' cd with another computer, no cd-text. So I'm guessing, the PS3 picked up the data off CDDB. How that really managed, I'm not too sure though, but hmm.
Dug up a cd-rw, burned on the burner that supposedly can burn cd-text. Itunes doesn't pull auto-info on it, but a cddb/gracenote query in media player pulls up the appropiate album information. PS3 play test, mimics original 'good burn', it appears to pull cd info off cddb.
So I'm left pondering, instead, why one of the albums I bought off iTunes has no album information then I remember, mcchris and suspect that it may not even have a cddb entry now .

Text Area for long text not appearing properly for BBP_POC_DISPLAY Service

Hi,
In our development we have added additional Icon at ITS in Process PO transaction and onclicking that icon Web dynpro AB screen called with the Purchase Order No of selected row .(SRM 5.0)
There is one more icon in Web dynpro screen on click of that Purchase order service open in ITS with display mode .This is achieved with service BBP_POC_DISPLAY from Web Dynpro-AB.
This is also working ok only the issue is in Document tab of PO The Text Area for long text appear at Top .This functionality is working fine with BBP_POC service from ITS .
Has anybody faced this kind of issue ?
Thanks,
SMS

Hi SMS,
I am unsure of the additional component you are talking about. In general, issues with text area misplacing, is solved by note 1067625. May be you can check it.
thanks,
Ashwin

Long text not displayed in outpur of adhoc query

Hi,
I am trying to run an ad hoc query in which i need the Org unit long text in the output.
When i run i only see the short text of the Org unit.I tried changing the output display option as 'Value and text' and 'text' both but it shows the short text only.
Could you please suggest what changes i need to make to the infoset to view the long text of the Org unit.
elp will be highly appreciated.
sushil

The help text does not say that this is the case for routings (and I dont know it either as I never loaded text for routings).
Of course you can read your text with the function module, as you enter the keys like you done it to load the text.
But this is not a proof at all.
In 90 % where the text does not appear it is just a matter of the used key. maybe forgot to have leading zeros in the name field.
Best you enter a text manually in a route, then you use SE16 with table STXH to find this record, and then you compare the key fields of this record with the key fields of a record you created with the upload.
if this is all okay, then it might have to do with a text indicator in the normal tables of the routing.

Fields not greyed out in display mode in screen exit

Hi all,
i am working on an screen exit for CJ02 transaction. the values in the customer subscreen are getting updated in database and even it is reflecting in fields when viewed again. the problem is that in display mode (CJ03) the fields are still editable. though there is no save button, but the fields should be greyed out.
i have tried to modify screen using LOOP AT SCREEN in the function exit provided in PBO.....but it is not picking the subscreen.
please provide any solution as soon as possible.
thanks in advance

In the PBO in your screen exit:
IF sy-tcode EQ 'CJ03'.
LOOP AT SCREEN .
if screen-name 'your field'
screen-input = 0.
screen-output = 1.
MODIFY SCREEN.
ENDIF.
endif.
what enhancement are you using?
bye

Text Tools Greyed out Acrobat 9 Pro

I really need to do a quick fix on a PDF document. My text tools are greyed out. There are no security issues on the document. I put "never" in the PDF/A view Mode as per another person suggested when I googled. I can't get anything to work.

I opened the document on my home Mac computer and the text tool worked! My 'newer' home Mac came with Lion. My Mac at work was purchased in May 2008 and it came with Tiger. I had to upgrade it to Leopard and then Snow Leopard, then Lion. I think these upgrades have caused lots of problems. I took my Mac into an Apple Store and they upgraded it to the point for me to purchase Lion, which I did. I have a bunch of Adobe products and have had problems with many of them since upgrading to Lion (Tiger worked great). Bridge gets stuck all the time and I have to force quit it all the time. Can't drag and drop files very easily in Bridge. Photoshop has some problems, and there are other nusances I can't think of right now when I work in InDesign and Illustrator. Just don't know what to do about it. (I am the only Mac user at work.)
I guess the text tools worked because I shut down the computer at the end of the day. I didn't think about rebooting when I had the problems because I am getting use to having so many!
Thanks for trying to help me. If you have hear of any of the other problems I wrote above and can lead me in the right direction, I would be very appreciative.

Long Text not transfered from Notification to Order

Hi Experts,
We have 4.6 c version where in the Long Text from Notification created does not gets transfereed to Order if Order is created through Notification.
Does any one knows about any config missing or any note which needs to be applied.
Also if we go for E.C.C 6.0 do we need to maintain the config
Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Order >Functions and Settings for Order Types>Define Notification and Order Integration
instead of or in addition to the config
Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Notifications >Notification Creation>Notification Types-->Assign Notification Types to Order Types
Appreciate your valuable input in this regards
Thanks
Manish

Hi
These are the some of the notes related to ur issue...
I am not sure its gonna solve... but check it.. u might get some idea
[445628|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=445628]
[661800|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=661800]
Pl Note : i think in 4.6c it not available kindly check in Define notification and order data in one screen whether option is available or not
- Pithan

Long text not apearing on contract

Hi SAP Gurus,
Can anybody please help me with this scenario. The long text appears on the PO but does not appear on contract. When i say long text it refers to the Basic text in the additional data part of the Basic data tab. Whatever text we maintain here, it is appearing on PO but not on contract. Now here i need one more clarification. What about the Purchase order text tab in the material master. Do we need to maintain something here in order to get the long text on contract or how is it? PLease clarify me on this
The configuration looks ok.
Thanks
Anusha

Hi Manish,
I'm getting confused here with the names of texts and the locations that they get copied to. PLease explain me what each type of text does and where does it get copied if we want it to
thanks
Anusha

Notiifcation Long text not grey out

Similar Messages

Maybe you are looking for