Nouveau doesn't start with some error messages

I have Samsung NP300V5A laptop, with GeForce GT520MX installed. After nouveau installation I saw some errors I've never seen before, and I didn't find anything useful on the web on that matter. Any suggestions appreciated.
dmesg|grep nouveau:
[   11.002437] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0d9110a1
[   11.002439] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
[   11.002440] nouveau  [  DEVICE][0000:01:00.0] Family : NVD0
[   11.003658] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   11.051772] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.051774] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   11.051839] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.051840] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[   11.051842] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.051843] nouveau  [   VBIOS][0000:01:00.0] checking PCIROM for image...
[   11.051844] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.051845] nouveau E[   VBIOS][0000:01:00.0] unable to locate usable image
[   11.065308] nouveau E[  DEVICE][0000:01:00.0] failed to create 0x10000001, -22
[   11.078877] nouveau E[     DRM] failed to create 0x80000080, -22
[   11.092800] nouveau: probe of 0000:01:00.0 failed with error -22
lspci|grep NVIDIA:
01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)
/var/log/Xorg.8.log:
http://anonymousdelivers.us/44377
lsmod|grep nouveau:
nouveau               916214  0
mxm_wmi                 1467  1 nouveau
wmi                     8379  2 mxm_wmi,nouveau
ttm                    64499  1 nouveau
drm_kms_helper         35090  2 i915,nouveau
video                  11170  3 i915,samsung_laptop,nouveau
drm                   223731  5 ttm,i915,drm_kms_helper,nouveau
i2c_algo_bit            5391  2 i915,nouveau
i2c_core               22774  7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau,videodev
button                  4701  2 i915,nouveau
Last edited by JediKnight (2013-04-08 23:33:18)

Try to remove nouveau and use instead the nvidia driver, see if it solves your problem.
If you use nouveau because you absolutely want an free driver, then I can't help you, I never used it myself .

Similar Messages

  • Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

    Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • The boot camp manager keeps quitting after re-start with an error message, why? I've installed the latest updates for XP 32bit

    The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit

    Alveto wrote:
    The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit
    Are we supposed to guess what the error message is?

  • Itunes wont start *with* microsoft error message

    WHen i try to start itunes i get and error message that asks to send in error report, and when i click the technical info about the error it says that this file "f462_appcompat.txt" was included in the error.
    Any ideas i have tried uninstalling both itunes and quicktime.

    actually i get an Microsfot Visual C++ Runtime Library Error
    Okay. Let's try swapping out that QuickTime one more time, taking a few additional explicit precautions this time.
    Head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If you have "hide filename extensions for known file types" enabled on the PC, those files will appear as QuickTime and QuickTimeVR.)
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Firefox crashes upon start with the error message: Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.

    I have tried to open firefox multipul times only to receive the error message:
    We're Sorry
    Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
    To help us diagnose and fix the problem, you can send us a crash report.
    When I send the report and try to restart firefox and see that I have several tabs open, but it quickly shuts down again before I can do anything other then glance at it.

    http://kb.mozillazine.org/Firefox_crashes

  • Satellite A110 starts with "PXE" error message

    I was watching something on the internet that i usually watch from the web adress www.datemule.com i think, and without doing something new my laptop i think began to restart and then appeared that message:
    INTEL UNDI, PXE - 2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation
    For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM
    INTEL UNDI, PXE - 2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation
    For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM
    what that means? please help me resolve it!
    I look forward to your answer!Thank you!

    PXE-E61: Media test failure, check cable means that notebook tried to boot from last possible option which is LAN but since this was not possible, this message appeared saying Media test failure, check cable
    Why notebook tries to boot from LAN?
    Well in most cases this happens because it was not possible to boot from other bootable devices like HDD or CD/DVD drive.
    I agree with DR.Lamp it looks like the HDD died and therefore the notebook could not boot from HDD.
    Seems you will need to replace the HDD and would need to reinstall the Windows system again.

  • Kdenlive doesn't start with the latest mlt package?

    Since mlt updated to 0.8.2 kdenlive starts with the error message:
    mlt_repository_init: failed to dlopen /usr/lib/mlt/libmltxml.so
    (/usr/lib/mlt/libmltxml.so: undefined symbol: mlt_playlist_new)
    mlt_repository_init: failed to dlopen /usr/lib/mlt/libmltcore.so
    (/usr/lib/mlt/libmltcore.so: undefined symbol: mlt_playlist_new)
    Even when the latest update specifies that kdenlive 0.9.2-5 requires mlt 0.8.2-3 the same error messages occur. What is wrong with my settings?

    hm.... this error message popped up... I think I accidentally forced installed mlt last time:
    error: failed to commit transaction (conflicting files)
    mlt: /usr/lib/libmlt.so.5 exists in filesystem

  • Anybody with isues running office:mac 2011,  I am using Mac OS 10.6.8  It ran for years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

    Anybody with isues running office:mac 2011,  I am using Mac OS 10.6.8  It ran for 2 years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

    I think my problem has been that in Sytem Preferences>Mouse, my "Double-Click Speed" was set to the SLOWEST setting. After some experimentation, I now have the that setting two notches from the "Fast" end of the scale. In case it's important, the "Primary mouse button" in my Preferences is set to "Left".
    This not only solves the text selection issues described, but also seems to eliminate the strange "resolving alias to" problem.
    [For the curious, I have a Logitech Performance MX wireless mouse which can be configured with "Logitech Control Center". But the LCC software doesn't control double-click speed; this setting can only be made in the Mouse System Preference pane.]

  • My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

    My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do.  I keep force quitting the applications and turning the computer off but it happens again after a while

    Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

  • I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

    I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

    Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
    Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
    Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
    So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

  • Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit".  Please advise on how to fix this error.  Thanks

    Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit".  Please advise on how to fix this error.  Thanks

    You probably need to delete your preview cache.  See here  
    Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
    Preference and other file locations in Lightroom 5

  • After installing Photoshop Elements 12  Organizer starts OK but Editor starts then immediately terminates with no error messages. Suggestions appreciated.

    After new install of Adobe Photoshop Elements 12 editor will start but just terminates/disappears with no error message. The organizer starts and runs OK   Win7/64 with latest maintenance  i73770, Nvida GTX 670 16 GB memory. Install log shows no errors. Same thing happened with Adobe Premier Elements 12. 

    Troubleshoot system errors, freezes | Windows | Adobe software

  • TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    This user talked to Apple Support personnel and confirms what Larry is suggesting:
    crowland1066
    Re: book upload fails
    Nov 30, 2013 3:02 PM (in response to pablo123)
    Just got off the phone with apple support.  If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
    Happy Holidays

  • Updated to Mavericks and the new version of iPhoto starts to install but just gets to 10.2MB and starts all over and then comes up with an error message

    I installed Mavericks to my computer and iPhoto isn’t working it has a grey no working symbol over it.  So I tried to download the new version of iPhoto but it starts to download and just gets to 10.2MB and starts all over after about 3 mins of doing this it comes up with an error message saying  an error had occurred.  I have tried downloading several times restarting the computer and downloading and still get the same thing over and over again.  Any help would be greatly appreciated! 

    Contact App Store support. There's a link on the right hand side of the App Store Window.

  • If I copy the "lcds" folder, Tomcat starts with socket errors

    In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
    [LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
    java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
    [LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
    flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications  are not configured to use this same port.
    Am I doing something wrong?
    Thanks,
    Borek

    What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port  in the LCDS web and in your new web app.
    You can deal with this one of two ways:
    Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
    Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
    I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

Maybe you are looking for

  • Moving XI transports from QA to Prod server

    Hello, We are getting ready to send our XI transports from the QA server to the production server.  We are currently using the file transfer method - we have not yet finished setting up the CMS server.  Now my question is this: For the Integration Re

  • How do I redeem a gift card has not been properly activated?

    I recieved a 100 dollar app store gift card when I bought my mac for college. when I tried to redeem the card it said that it hadnt been "properly activated". I typed it in at least three times, double checking the letters, then I used the camera to

  • Download drop off.

    Hihi, Long time lurker, first time post:-) I've not seen my problem posted before, so I would be grateful for any help. For the last 2 weeks when trying to download large files from Apple and Microsoft (or wherever) I can download between 20 to 90 pe

  • Editor stuck in read only mode

    Am able to connect to a 9i database, but am unable to edit any code. Logon appears successful, connection made, and am able to query the database. However, when I open stored procedures for editing, the edit window doesn't respond to any keystrokes.

  • Failed to create new JCO client connection WD_FLIGHTLIST_RFC_METADATA_DEST:

    I tried the demo in SDN, but failed . Why?