Novell-named failed to start / 2nd DSFW server
Posting this here in case anyone else runs into this and it took me some tinkering to figure it out.
I was busy installing a 2nd DSFW server and ran into a named error during the provisioning where it would start successfully but fail in the 'is it really running' check.
When manually starting novell-named it gives a successful start but then exits after a second or so.
When checking /etc/opt/novell/named/ it turned out that there was no named.conf even after configuring the dns server from imanager.
/var/opt/novell/log/named/named.run had
Code:
07-Mar-2012 16:26:07.277 general: main: notice: starting BIND 9.3.2 -u named
07-Mar-2012 16:26:07.319 general: dns/db: critical: Unable to login Error code:-223
07-Mar-2012 16:26:07.320 general: dns/db: critical: Failed to load RRs of rootserver zone with error -112
07-Mar-2012 16:26:07.320 general: dns/hints: warning: Loading Root data from directory Failed
07-Mar-2012 16:26:07.321 general: server: info: loading configuration from '/etc/opt/novell/named/named.conf'
07-Mar-2012 16:26:07.321 config: isccfg/parser: error: none:0: open: /etc/opt/novell/named/named.conf: file not found
07-Mar-2012 16:26:08.359 general: dns/db: critical: Unable to login Error code:-223
07-Mar-2012 16:26:08.359 network: interfacemgr: info: dns_edir_get_multival has returned error inside store_dnsserver_ip_address:25
07-Mar-2012 16:26:08.359 network: interfacemgr: error: Error occured while updating the IP list of the DNS server object:25
07-Mar-2012 16:26:08.359 general: server: critical: loading configuration: file not found
07-Mar-2012 16:26:08.359 general: server: critical: exiting (due to fatal error)
What I ended up doing was copied the options { } bit from the already up and running DSFW server into the new one, adjusted the edir object names and then novell-named would start and keep running.
It was however still giving login errors in the logfile, after remembering it used the servers commonproxy user I ran '/opt/novell/proxymgmt/bin/change_proxy_pwd.sh -A yes' (you can find this in crontab already) and then everything started to work for real after restarting novell-named.
Somewhere along the line it lost the correct password for the proxy user but there is hardly any indication of this, it gave me enough searching around to post this :-)
The manual creation of the named.conf file is *probably* not needed, but mentioning it just in case.
also, it is safe to ignore the 'unable to authenticate to ldap with <insert AD with DC= credentials here>' error you get when your eDir ldap server you are using to install eDir is not a DSFW server, this gave me a 'hmmmm' moment too.
It most likely is a problem with the casa credential. It could be the credentials are there but their is a mismatch with with the Common Proxy user's password.
You can verify the common proxy user's password with
common-proxy-casa-repair-tool
Then run the novell-dns-casa-repair-tool to sync up the dns casa keys with the correct credentials.
Similar Messages
-
I fail to start the sap server with error:Operating system call recv failed
I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 12784 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c 7883] -
HELP!!! Failed to start Embedded OC4J Server in JDev
Hi,
I have installed Oracle JDeveloper 10.1.2.1.0 and have tried to run simple test(for example index.jsp - Welcome) but I get error. - Failed to start Embedded OC4J Server in JDev
OC4J with simple test have started well in other computers. This situation first time for me.
Why OC4J can't start?
This is OC4J log mess
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\JDeveloper\jdev\system10.1.2.1.0.1913\oc4j-config>
C:\JDeveloper\jdk\bin\javaw.exe -ojvm -classpath C:\JDeveloper\j2ee\home\oc4j.jar;C:\JDeveloper\jdev\lib\jdev-oc4j.jar -Dhttp.proxyHost=coates-proxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=coatesnet*|phoenix*|ev_evs1*|ev*|evs*|dr002*|dr001*|raptor*|cweb01*|cweb03*|cweb02*|orangepages*|unity*|dw01*|intra-apps*|intranet*|prod02*|prod01*|dev3*|dev2*|dev1*|app03*|app02*|app01*|localhost|127.0.0.1 -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config C:\JDeveloper\jdev\system10.1.2.1.0.1913\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Process exited with exit code -1073741819.
Help me please!Did the setup for JDEV_USER_HOME with the proper path (C:\OAFRAME\jdevhome\jdev) ,
Keep the dbc file in the directory and setup the front end as well as back end login details in cluding responsibility details. -
Failed To Start A Dedicated Server Process
Hi
Oracle 9.2
Windows Advanced OS
6G Ram
We switched our server from Shared Server to Dedicated. All was going well, but suddenly no one could log in. Currently logged in users were okay.
Alert Log showed several of the following errors:
skgpspawn failed:category = 27143, depinfo = 9261, op = spdcr, loc = skgpspawn
No errors in the listener.log
Attempted login with sqlplus reported ORA-12500: TNS:listener failed to start a dedicated server process
At the time less than 2G of the 6G was being utilized.
Also, during the time of this event, the event log showed several of the following:
Event Type: Error
Event Source: Oracle.ACP
Event Category: None
Event ID: 31
Date: 5/16/2008
Time: 9:48:59 AM
User: N/A
Computer: ACP
Description:
Unable to begin another thread.
Any help would be appreciated.
kdHi Don
Thanks for the info. I now have the 3GB switch set. I have been leery of setting the indirect buffers due to some posts I have read like these:
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
Cause: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
Action: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters.
ORA-07305: ksmcsg: illegal database buffer size.
Cause: The database buffer size must be a multiple of the extended cache mapping size for indirect data buffers to be used.
Action: Verify that the db_block_size parameter is correct in INIT.ORA, or disable the use_indirect_data_buffers parameter.
I'm assuming these are 10G and above errors, but I just don't know.
Our db cache is already at a fairly large size.(see non standard configs below).
Also, is this an either/or thing. In other words, /3GT OR /PAE and indirect buffers, but not both?
Thanks again.
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 1350
sessions = 1490
resource_limit = FALSE
license_max_sessions = 0
shared_pool_size = 268435456
shared_pool_reserved_size= 26214400
large_pool_size = 369098752
pre_page_sga = TRUE
enqueue_resources = 124
dbwr_io_slaves = 2
control_files = E:\orant\admin\OR8i\control1\Contrl1.ctl, E:\orant\admin\OR8i\control1\Contrl3.ctl, E:\orant\admin\OR8i\control2\Contrl2.ctl, E:\orant\admin\OR8i\control2\Contrl4.ctl
db_block_size = 8192
db_keep_cache_size = 16777216
db_cache_size = 503316480
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = E:\orant\admin\OR8i\arch
log_archive_format = ARC%S.%T
log_buffer = 65536
log_checkpoint_interval = 0
log_checkpoint_timeout = 1800
db_files = 254
db_file_multiblock_read_count= 8
dml_locks = 2000
transactions_per_rollback_segment= 3
max_rollback_segments = 700
rollback_segments = roll_1, roll_2, roll_3, roll_4, roll_5, roll_6, roll_7, roll_8, roll_9,
remote_login_passwordfile= EXCLUSIVE
license_max_users = 0
global_names = TRUE
shared_servers = 0
max_shared_servers = 0
session_cached_cursors = 25
utl_file_dir = *
job_queue_processes = 2
background_dump_dest = E:\orant\admin\OR8i\bdump
user_dump_dest = E:\orant\admin\OR8i\udump
max_dump_file_size = 50240
sort_area_size = 1048576
sort_area_retained_size = 65536
db_name = EMR
open_cursors = 450
optimizer_mode = CHOOSE -
Failed to start remote debug server
I'm having trouble getting xcode to play nicely with my provisioned iPhone under beta 7. When I change my default target to "Device Debug" and do a clean build the following occurs:
1) The code compiles and links
2) The application is installed on the iPhone
3) XCode tries to start the remote debug server and fails with the following message:
Failed to start remote debug server for test.app on Keith's iPhone
The application does get installed on my phone, but I am unable to use xcode to view the logs and perform other debugging related activities.
Has anyone seen this before and know how to fix it?
Thank you,
-KeithThanks for the reply, but it didn't seem to help. Maybe I didn't do it right. I did:
- Delete app from iPhone
- Clean project
- Close project
- Xcode->Empty Caches
- Close Xcode
- Disconnect and reconnect device (via iTunes eject)
- Open project
- Build & Go
Still the same 'please disconnect and reconnect the device' when starting debugserver
I am able to run the app just fine, but can't use Instruments or the debugger -
ORA-12500 Tns listner failed to start the dedicated server process.
Hi all,
I am getting below error message when i am trying to connect to database through db console.
OS-Windows sever
Database-10GR1
ORA-12500 Tns listner failed to start the dedicated server process.
Kindly help me out..
Thanks in advance
Edited by: rajaryan on Sep 17, 2009 4:46 AMHi all,
I am getting below error message when i am trying to connect to database through db console.
OS-Windows sever
Database-10GR1
ORA-12500 Tns listner failed to start the dedicated server process.
Kindly help me out..
Thanks in advance
Edited by: rajaryan on Sep 17, 2009 4:46 AMYou are running short of resources. Check v$resource_limit. You may also use the orastack utility for minimizing the memory utilized by oracle.
http://hrivera99.blogspot.com/2008/01/orastack.html
Regards,
S.K. -
'ORA-12500: TNS: Listener failed to start a dedicated server process'
Hi,
While connecting from one database to another users are getting the below error when they are giving a select statement,its taking around 30 minutes and showing
'ORA-12500: TNS: Listener failed to start a dedicated server process'...
What could be the issue...
Thanks,
Kr.If database to which they are trying to connect is running, then check listener.log ($ORACLE_HOME/network/log).
Probably there is not enough system resources - check opsystem logs as well (on unix /var/log or /var/adm) on windows look at events.
Look into db alert.log as well. -
Oracle 10G : ORA-12500: TNS:listener failed to start a dedicated server pro
When connecting to Oracle I am getting this error. I have restarted the database, restarted the listener, but the problem does not go away. I have increased the processes to 400.
Error :
ORA-12500: TNS:listener failed to start a dedicated server process
listener.log :
27-APR-2004 11:15:38 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2265)) * establish * BUILD.OCS.COM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Listener.trc :
[27-APR-2004 11:14:38:382] snttcallback: op = 5, bytes = 170, err = 0
[27-APR-2004 11:14:38:382] ntt2err: soc 324 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
[27-APR-2004 11:14:38:382] nsdo: 160 bytes from NS buffer
[27-APR-2004 11:14:38:382] nsglgrDoRegister: inst loads: ld1:12 mld1:100 ld2:12 mld2:445
[27-APR-2004 11:14:38:382] nsdo: 68 bytes to NS buffer
[27-APR-2004 11:15:38:951] nsopen: opening transport...
[27-APR-2004 11:15:38:951] nttcnp: Validnode Table IN use; err 0x0
[27-APR-2004 11:15:38:951] nttcnp: getting sockname
[27-APR-2004 11:15:38:951] nttcnr: waiting to accept a connection.
[27-APR-2004 11:15:38:951] nttcnr: getting sockname
[27-APR-2004 11:15:38:951] nttcnr: connected on ipaddr 192.168.180.112
[27-APR-2004 11:15:38:951] nttvlser: valid node check on incoming node 192.168.180.112
[27-APR-2004 11:15:38:951] nttvlser: Accepted Entry: 192.168.180.112
[27-APR-2004 11:15:38:951] nttcon: set TCP_NODELAY on 288
[27-APR-2004 11:15:38:951] nsopen: transport is open
[27-APR-2004 11:15:38:951] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[27-APR-2004 11:15:38:951] nsopen: global context check-in (to slot 7) complete
[27-APR-2004 11:15:38:951] nsanswer: deferring connect attempt; at stage 5
[27-APR-2004 11:15:38:951] nscon: doing connect handshake...
[27-APR-2004 11:15:38:951] nscon: got NSPTCN packet
[27-APR-2004 11:15:38:951] nsevdrcvreq: recving connect data
[27-APR-2004 11:15:38:951] nsdo: 248 bytes from NS buffer
[27-APR-2004 11:15:38:951] nsevdansw: exit
[27-APR-2004 11:15:38:951] nsglbgetRSPidx: returning ecode=0
[27-APR-2004 11:15:38:951] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
[27-APR-2004 11:15:38:951] nsbeqaddr: connecting...
[27-APR-2004 11:15:38:951] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
[27-APR-2004 11:15:38:951] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[27-APR-2004 11:15:38:951] nscon: sending NSPTRF packet
[27-APR-2004 11:15:38:951] nstimarmed: no timer allocated
[27-APR-2004 11:15:38:951] nsclose: closing transport
[27-APR-2004 11:15:38:951] nsclose: global context check-out (from slot 7) complete
[27-APR-2004 11:15:38:951] nsgldissolve: Deallocating cxd 0xd89e18.Listener.ora:
lsncrtl status:
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 27-APR-2004 11:27:56
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
Start Date 27-APR-2004 11:27:23
Uptime 0 days 0 hr. 0 min. 33 sec
Trace Level admin
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.1.0\db_1\network\admin\listener.ora
Listener Log File C:\oracle\product\10.1.0\db_1\network\log\listener.log
Listener Trace File C:\oracle\product\10.1.0\db_1\network\trace\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "BUILD" has 1 instance(s).
Instance "BUILD", status UNKNOWN, has 1 handler(s) for this service...
Service "BUILD.OCS.COM" has 1 instance(s).
Instance "build", status READY, has 2 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
sqlnet.log:
Fatal NI connect error 12500, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 27-APR-2004 11:28:42
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log:
27-APR-2004 11:28:42 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2527)) * establish * BUILD.OCS.COM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
listener.trc with ADMIN on:
[27-APR-2004 11:28:42:011] nsevwait: 1 newly-posted event(s)
[27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NT events set:
CONNECTION REQUEST
[27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NS events set:
INCOMING CALL
[27-APR-2004 11:28:42:011] nsevwait: event is 0x1, on 2
[27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:42:011] nsglhe: entry
[27-APR-2004 11:28:42:011] nsmal: 536 bytes at 0xd7c1f0
[27-APR-2004 11:28:42:011] nsmal: 1632 bytes at 0xd7e638
[27-APR-2004 11:28:42:011] nsopen: opening transport...
[27-APR-2004 11:28:42:011] nttcon: entry
[27-APR-2004 11:28:42:011] nttcon: toc = 3
[27-APR-2004 11:28:42:011] nttcnp: entry
[27-APR-2004 11:28:42:011] ntvlin: entry
[27-APR-2004 11:28:42:011] ntvlin: exit
[27-APR-2004 11:28:42:011] nttcnp: Validnode Table IN use; err 0x0
[27-APR-2004 11:28:42:011] nttcnp: getting sockname
[27-APR-2004 11:28:42:011] nttcnp: exit
[27-APR-2004 11:28:42:011] nttcnr: entry
[27-APR-2004 11:28:42:011] nttcnr: waiting to accept a connection.
[27-APR-2004 11:28:42:011] nttcnr: getting sockname
[27-APR-2004 11:28:42:011] nttcnr: connected on ipaddr 192.168.180.112
[27-APR-2004 11:28:42:011] nttvlser: entry
[27-APR-2004 11:28:42:011] nttvlser: valid node check on incoming node 192.168.180.112
[27-APR-2004 11:28:42:011] nttvlser: Accepted Entry: 192.168.180.112
[27-APR-2004 11:28:42:011] nttcnr: exit
[27-APR-2004 11:28:42:011] nttcon: set TCP_NODELAY on 248
[27-APR-2004 11:28:42:011] nttcon: exit
[27-APR-2004 11:28:42:011] nsopen: transport is open
[27-APR-2004 11:28:42:011] nsnainit: answer
[27-APR-2004 11:28:42:011] nsnasvnainfo: NA disabled for this connection
[27-APR-2004 11:28:42:011] nainit: entry
[27-APR-2004 11:28:42:011] nagblini: entry
[27-APR-2004 11:28:42:011] nau_gin: entry
[27-APR-2004 11:28:42:011] nau_gparams: entry
[27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
[27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
[27-APR-2004 11:28:42:011] nau_gparams: Using default value "FALSE"
[27-APR-2004 11:28:42:011] nau_gslf: entry
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: Found 0 items
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] nau_gslf: Using default value "all available adapters"
[27-APR-2004 11:28:42:011] nauss_set_state: entry
[27-APR-2004 11:28:42:011] nauss_set_state: exit
[27-APR-2004 11:28:42:011] nau_gslf: exit
[27-APR-2004 11:28:42:011] nau_gparams: exit
[27-APR-2004 11:28:42:011] nau_gin: exit
[27-APR-2004 11:28:42:011] nagblini: exit
[27-APR-2004 11:28:42:011] na_saveprot: entry
[27-APR-2004 11:28:42:011] na_saveprot: exit
[27-APR-2004 11:28:42:011] nacomin: entry
[27-APR-2004 11:28:42:011] nas_init: entry
[27-APR-2004 11:28:42:011] nas_init: exit
[27-APR-2004 11:28:42:011] nau_ini: entry
[27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: entry
[27-APR-2004 11:28:42:011] nauss_set_state: entry
[27-APR-2004 11:28:42:011] nauss_set_state: exit
[27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: exit
[27-APR-2004 11:28:42:011] nau_gettab: entry
[27-APR-2004 11:28:42:011] nau_gettab: exit
[27-APR-2004 11:28:42:011] nau_sini: entry
[27-APR-2004 11:28:42:011] nau_sini: exit
[27-APR-2004 11:28:42:011] nau_ini: exit
[27-APR-2004 11:28:42:011] naeeinit: entry
[27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
[27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
[27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
[27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
[27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
[27-APR-2004 11:28:42:011] naeshow: entry
[27-APR-2004 11:28:42:011] naeshow: exit
[27-APR-2004 11:28:42:011] naeeinit: exit
[27-APR-2004 11:28:42:011] naecinit: entry
[27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
[27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
[27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
[27-APR-2004 11:28:42:011] naeshow: entry
[27-APR-2004 11:28:42:011] naeshow: exit
[27-APR-2004 11:28:42:011] naecinit: exit
[27-APR-2004 11:28:42:011] nadisc: entry
[27-APR-2004 11:28:42:011] nacomtm: entry
[27-APR-2004 11:28:42:011] nacompd: entry
[27-APR-2004 11:28:42:011] nacompd: exit
[27-APR-2004 11:28:42:011] nacompd: entry
[27-APR-2004 11:28:42:011] nacompd: exit
[27-APR-2004 11:28:42:011] nacomtm: exit
[27-APR-2004 11:28:42:011] nas_dis: entry
[27-APR-2004 11:28:42:011] nas_dis: exit
[27-APR-2004 11:28:42:011] nau_dis: entry
[27-APR-2004 11:28:42:011] nau_dis: exit
[27-APR-2004 11:28:42:011] naeetrm: entry
[27-APR-2004 11:28:42:011] naeetrm: exit
[27-APR-2004 11:28:42:011] naectrm: entry
[27-APR-2004 11:28:42:011] naectrm: exit
[27-APR-2004 11:28:42:011] nagbltrm: entry
[27-APR-2004 11:28:42:011] nau_gtm: entry
[27-APR-2004 11:28:42:011] nau_gtm: exit
[27-APR-2004 11:28:42:011] nagbltrm: exit
[27-APR-2004 11:28:42:011] nadisc: exit
[27-APR-2004 11:28:42:011] nainit: exit
[27-APR-2004 11:28:42:011] nsnainit: NS Connection version: 313
[27-APR-2004 11:28:42:011] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd Translations follow:
native service(s) is (are) wanted
NA disabled remotely for this connection
NA services unavailable on both processes - negotiation not needed
[27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd Translations follow:
native service(s) is (are) wanted
NA disabled remotely for this connection
NA services unavailable on both processes - negotiation not needed
"and" info flags: 0xd Translations follow:
native service(s) is (are) wanted
NA disabled remotely for this connection
NA services unavailable on both processes - negotiation not needed
[27-APR-2004 11:28:42:011] nsopen: global context check-in (to slot 7) complete
[27-APR-2004 11:28:42:011] nsopen: lcl[0]=0x34ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=7, flg=0x4000, mvd=0
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsanswer: deferring connect attempt; at stage 5
[27-APR-2004 11:28:42:011] nsevreg: begin registration process for 7
[27-APR-2004 11:28:42:011] nsevreg: sgt=0, evn=4, evt[2]=0x0
[27-APR-2004 11:28:42:011] nsevreg: begin notification process for 7
[27-APR-2004 11:28:42:011] nsrah: setting transport read mode (2)
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Clearing non-blocking mode
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Setting connection into async mode
[27-APR-2004 11:28:42:011] nsevreg: rdm=2, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
[27-APR-2004 11:28:42:011] nsevreg: registering for 0x20
[27-APR-2004 11:28:42:011] nttmrd: entry
[27-APR-2004 11:28:42:011] nttrd: entry
[27-APR-2004 11:28:42:011] snttcallback: entry
[27-APR-2004 11:28:42:011] snttcallback: exit
[27-APR-2004 11:28:42:011] nttrd: socket 248 had bytes read=316
[27-APR-2004 11:28:42:011] nttrd: exit
[27-APR-2004 11:28:42:011] nsglhe: exit
[27-APR-2004 11:28:42:011] nsevwait: 7 registered connection(s)
[27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 7)...
[27-APR-2004 11:28:42:011] nsevwait: 0 newly-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevdansw: at STAGE 5
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=2040, what=8, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=14, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
[27-APR-2004 11:28:42:011] nscon: doing connect handshake...
[27-APR-2004 11:28:42:011] nscon: recving a packet
[27-APR-2004 11:28:42:011] nsprecv: 316 bytes from leftover
[27-APR-2004 11:28:42:011] nsprecv: tlen=316, plen=58, type=1
[27-APR-2004 11:28:42:011] nsprecv: 258 bytes to leftover
[27-APR-2004 11:28:42:011] nscon: got NSPTCN packet
[27-APR-2004 11:28:42:011] nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0x860e
[27-APR-2004 11:28:42:011] nsconneg: vsn=313, gbl=0x1, sdu=2048, tdu=32767
[27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsevdrcvreq: recving connect data
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=248, what=1, uflgs=0x4001, cflgs=0x0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=58, gtc=58, ptn=10, ptc=2011
[27-APR-2004 11:28:42:011] nsrdr: recving a packet
[27-APR-2004 11:28:42:011] nsprecv: 258 bytes from leftover
[27-APR-2004 11:28:42:011] nsprecv: tlen=258, plen=258, type=6
[27-APR-2004 11:28:42:011] nsrdr: got NSPTDA packet
[27-APR-2004 11:28:42:011] nsrdr: NSPTDA flags: 0x0
[27-APR-2004 11:28:42:011] nsdo: what=1, bl=248
[27-APR-2004 11:28:42:011] nsdo: 248 bytes from NS buffer
[27-APR-2004 11:28:42:011] nsevdrcvreq: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nsevdansw: exit
[27-APR-2004 11:28:42:011] nsevwait: event is 0x20, on 7
[27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:42:011] nsglhe: entry
[27-APR-2004 11:28:42:011] nsglfc: Assume establishing a connection...
[27-APR-2004 11:28:42:011] nsglfc: command = establish
[27-APR-2004 11:28:42:011] nsglauthorized: entry
[27-APR-2004 11:28:42:011] nsglecmd: entry
[27-APR-2004 11:28:42:011] nttaddr2bnd: entry
[27-APR-2004 11:28:42:011] nttaddr2bnd: exit
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: entry
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: returning ecode=0
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: exit
[27-APR-2004 11:28:42:011] nsglb: entry
[27-APR-2004 11:28:42:011] nsglb: exit
[27-APR-2004 11:28:42:011] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
[27-APR-2004 11:28:42:011] nlpcaini: entry
[27-APR-2004 11:28:42:011] nlpcaini: prg = oracle
[27-APR-2004 11:28:42:011] nlpcaini: arg[0] = oraclebuild
[27-APR-2004 11:28:42:011] nlpcaini: arg[1] = (LOCAL=NO)
[27-APR-2004 11:28:42:011] nlpcaini: exit
[27-APR-2004 11:28:42:011] nsbeqaddr: connecting...
[27-APR-2004 11:28:42:011] ntpcon: entry
[27-APR-2004 11:28:42:011] ntpcon: toc = 1
[27-APR-2004 11:28:42:011] sntpcall: entry
[27-APR-2004 11:28:42:011] snlpcss: entry
[27-APR-2004 11:28:42:011] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
[27-APR-2004 11:28:42:011] sntpcall: exit
[27-APR-2004 11:28:42:011] ntpcon: exit
[27-APR-2004 11:28:42:011] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[27-APR-2004 11:28:42:011] nsglrespond: entry
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=67, bl=161, what=10, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=258, gtc=258, ptn=10, ptc=2011
[27-APR-2004 11:28:42:011] nscon: sending NSPTRF packet
[27-APR-2004 11:28:42:011] nspsend: plen=173, type=4
[27-APR-2004 11:28:42:011] nttmwr: entry
[27-APR-2004 11:28:42:011] nttwr: entry
[27-APR-2004 11:28:42:011] snttcallback: entry
[27-APR-2004 11:28:42:011] snttcallback: exit
[27-APR-2004 11:28:42:011] nttwr: socket 248 had bytes written=173
[27-APR-2004 11:28:42:011] nttwr: exit
[27-APR-2004 11:28:42:011] nspsend: 173 bytes to transport
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nstimarmed: no timer allocated
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=66, bl=0, what=0, uflgs=0x0, cflgs=0x2
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4000, mvd=0
[27-APR-2004 11:28:42:011] nsevunreg: cid=7, sgt=0, rdm=2
[27-APR-2004 11:28:42:011] nsrah: re-setting transport read mode
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Clearing async mode
[27-APR-2004 11:28:42:011] nsevunreg: 6 registered connection(s)
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsclose: closing transport
[27-APR-2004 11:28:42:011] nttdisc: entry
[27-APR-2004 11:28:42:011] nttdisc: Closed socket 248
[27-APR-2004 11:28:42:011] nttdisc: exit
[27-APR-2004 11:28:42:011] nsclose: global context check-out (from slot 7) complete
[27-APR-2004 11:28:42:011] nsmfr: 1632 bytes at 0xd7e638
[27-APR-2004 11:28:42:011] nsmfr: 536 bytes at 0xd7c1f0
[27-APR-2004 11:28:42:011] nsgldissolve: entry
[27-APR-2004 11:28:42:011] nsgldissolve: Deallocating cxd 0xd7c608.
[27-APR-2004 11:28:42:011] nsgldissolve: exit
[27-APR-2004 11:28:42:011] nsglrespond: exit
[27-APR-2004 11:28:42:011] nsglecmd: exit
[27-APR-2004 11:28:42:011] nsglhe: exit
[27-APR-2004 11:28:42:011] nsevwait: 6 registered connection(s)
[27-APR-2004 11:28:42:011] nsevwait: 0 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 6)...
[27-APR-2004 11:28:45:136] snttcallback: entry
[27-APR-2004 11:28:45:136] snttcallback: op = 5, bytes = 170, err = 0
[27-APR-2004 11:28:45:136] snttcallback: exit
[27-APR-2004 11:28:45:136] nsevwait: 0 newly-posted event(s)
[27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NT events set:
READ
[27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NS events set:
INCOMING SEND
[27-APR-2004 11:28:45:136] nsevwait: event is 0x2, on 4
[27-APR-2004 11:28:45:136] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:45:136] nsglhe: entry
[27-APR-2004 11:28:45:136] nsglrohe: entry
[27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=68, bl=8196, what=0, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[27-APR-2004 11:28:45:136] nsdo: gtn=258, gtc=258, ptn=10, ptc=8155
[27-APR-2004 11:28:45:136] nsrdr: recving a packet
[27-APR-2004 11:28:45:136] nsprecv: 170 bytes from leftover
[27-APR-2004 11:28:45:136] nsprecv: tlen=170, plen=170, type=6
[27-APR-2004 11:28:45:136] nttmrd: entry
[27-APR-2004 11:28:45:136] nttrd: entry
[27-APR-2004 11:28:45:136] ntt2err: entry
[27-APR-2004 11:28:45:136] ntt2err: soc 296 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
[27-APR-2004 11:28:45:136] ntt2err: exit
[27-APR-2004 11:28:45:136] nttrd: exit
[27-APR-2004 11:28:45:136] nsrdr: got NSPTDA packet
[27-APR-2004 11:28:45:136] nsrdr: NSPTDA flags: 0x0
[27-APR-2004 11:28:45:136] nsdo: what=1, bl=8196
[27-APR-2004 11:28:45:136] nsdo: 160 bytes from NS buffer
[27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
[27-APR-2004 11:28:45:136] nsglgrDoRegister: inst loads: ld1:51 mld1:100 ld2:12 mld2:445
[27-APR-2004 11:28:45:136] nsglgrDoRegister: exit
[27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=67, bl=68, what=1, uflgs=0x2, cflgs=0x3
[27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[27-APR-2004 11:28:45:136] nsdo: gtn=170, gtc=170, ptn=10, ptc=8155
[27-APR-2004 11:28:45:136] nsdo: 68 bytes to NS buffer
[27-APR-2004 11:28:45:136] nsdofls: DATA flags: 0x0
[27-APR-2004 11:28:45:136] nsdofls: sending NSPTDA packet
[27-APR-2004 11:28:45:136] nspsend: plen=78, type=6
[27-APR-2004 11:28:45:136] nttmwr: entry
[27-APR-2004 11:28:45:136] nttwr: entry
[27-APR-2004 11:28:45:136] snttcallback: entry
[27-APR-2004 11:28:45:136] snttcallback: exit
[27-APR-2004 11:28:45:136] nttwr: socket 296 had bytes written=78
[27-APR-2004 11:28:45:136] nttwr: exit
[27-APR-2004 11:28:45:136] nspsend: 78 bytes to transport
[27-APR-2004 11:28:45:136] nsdoacts: flushing transport
[27-APR-2004 11:28:45:136] nttctl: entry
[27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
[27-APR-2004 11:28:45:136] nsglroHandleError: exit
[27-APR-2004 11:28:45:136] nsglrohe: exit
[27-APR-2004 11:28:45:136] nsglhe: exit
[27-APR-2004 11:28:45:136] nsevwait: 6 registered connection(s)
[27-APR-2004 11:28:45:136] nsevwait: 0 pre-posted event(s)
[27-APR-2004 11:28:45:136] nsevwait: waiting for transport event (0 thru 6)... -
TNS-12500: TNS:listener failed to start a dedicated server process
Hello all,
I have recently applied a patch on apps tier, after which the concurrent manager is not up & running,
while viewing the internal log
im getting the below error
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Starting AVAILMGR Concurrent Manager : 25-NOV-2013 13:02:02
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager AVAILMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Process monitor session ended : 25-NOV-2013 13:02:02
========================================================================
Starting test_1125@test Internal Concurrent Manager -- shell process ID 25362
logfile=/d01/apps/testcomn/admin/log/test_test/test_1125.mgr
PRINTER=noprint
mailto=appltest
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 25-NOV-2013 13:03:01 -
Shutting down Internal Concurrent Manager : 25-NOV-2013 13:03:01
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The test_1125@test internal concurrent manager has terminated with status 1 - giving up.
WARNING: RunAsUser for MSP ignored, check group ids (egid=501, want=51)
can not chdir(/var/spool/clientmqueue/): Permission denied
Program mode requires special privileges, e.g., root or TrustedUser.
Also in apps tier $TNS_ADMIN
the log says
25-NOV-2013 14:57:51 * ping * 0
25-NOV-2013 14:57:51 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=5147)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipeHI thanks for your reply,
I tried the above guide but dint helped me,
I tried modifiying Concurrent:GSM Enabled to N & concurrent manager started but all requests were in pending state not running so i reverted back to Concurrent:GSM Enabled Y
I ran autoconfig & this is the lastes error I am getting in internal manager log.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
The below is the log from $TNS_ADMIN log directory apps_test.ora
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.30.82)(PORT=13510)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:01 * ping * 0
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13512)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13514)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.30)(PORT=13516)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe -
ORA-12500 TNSLISTENER failed to start a dedicated server process
Environment W2000 Pro SP4 latest fixes
I just installed database 10g (10.1.0) in order to have a 10g (10.1) database (ORCL1) as required by Oracle Warehouse builder and other business intelligrence products like disoverer (from discoverer suite) and Portal 10g (9.0.4)
during installation of 10g database I got following messages
==>Oracle Cluster Registry failed to initialize (in french) and went on
==>error when starting OracleCsservice
i retried and went on.
Install finishes correctly
I can access the new database (type warehouse) with sqlplus in a dos window
However I can't reach it through SQL*Plus of oracle 10g database and get ORA-12500 TNSLISTENER failed to start a dedicated server process message
OracleCSService starting
OracleDBConsoleORCL1 started
OracleINFRASControl started
OracleINFRAprocessManager started
OracleINFRATNSListener started
OracleOraDb10g_home1iSQL*Plus Started
OraclePORTALBIASontrol Started
OraclePORTALBIProcessManager Started
OracleServiceASDB Started
OracleServiceORCL1 Started
...... other databases.....
I only have one LISTENER service (the one that was created for INFRAstructure instance) is it OK ?
All other databases instances I am using where created from INFRA DBCA. and all defined with a dedicated server.
I tried to define it through DBCA of Oracle database
left dedicated server and finish
won't work DBCA refuses
I also tried to Stop/start OracleServiceOrcl1 but it won't stop
database ORCL1 is unreachable from other instances:
from Oracle WareHouse Builder's Enterprise Manager console I get the same ORA-12500 message
same with Oracle Net Configuration Assistant of
Oracle Developer Suite Net assistant
What's wrong,
is one listener enough? is there a bug in the product?..
I read quite a few enties but didnt get the answer to my problemHello Werner,
What means error 1058?
i posted an entry in application server
Listener.ora and tsnames .ora where updated on INFRAstructure instance to be nearly identical to 10g DB instance (diference is one db definition)
However starting infrastructure and portal instances has become erratic and error prone:u
It takes about 20 minutes to start these two instances by hand has before i had only to start them and everything went smoothly (but took also a long time).
Now i get the following messages and have to use following opmnctl commands to have the whole thing running as follows:
==> start INFRASTRUCTURE
lancement de tnslsnr: veuillez patientez...
failed to start service, error 1058 ==> new message
TNS-12536: l'opération provoquerait le blocage ==>new
TNS-12560 erreur d'adaptateur de protocole ==> not new and didn(t care
TNS-00506 l'opération provoquerait un blocage ==> new
32-bits Windows Error: 997: Unknown error ==>not new and didn't care
I also get from SMTP the following mail:
Nom=LISTENER_ternes-1-81-57-68-1.fbx.proxad.net
Type=Listener
Hôte=ternes-1-81-57-68-1.fbx.proxad.net
Mesure=Status
Horodatage=2 nov. 2004 23 h 34 CET
Gravité=Critique
Message=The listener is down: TNS-12541: TNS:no listener .
Nom de la règle=Listener Availability
Propriétaire de la règle=SYSMAN
1-opmnctl status
opmnctl status
IAS-component process-type pid status
OID OID N/A Down
OC4J OC4J_SECURITY N/A Down
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon N/A Down
LogLoader logloaderd N/A Down
here its very erratic sometimes OID is in STOP status
2-opmnctl startall
opmnctl status
opmnctl status
IAS-component process-type pid status
OID OID 3504 Alive
OC4J OC4J_SECURITY 3416 Alive
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon N/A Down
LogLoader logloaderd N/A Down
3_opmnctl startproc ias-component=dcm-daemon
opmnctl status
IAS-component process-type pid status
OID OID 3504 Alive
OC4J OC4J_SECURITY 3416 Alive
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon 5524 Alive
LogLoader logloaderd N/A Down
At that point i can start Portal instance
Processes in Instance: PORTALBI.ternes-1-81-57-68-1.fbx.proxad.net
----------------------------------------------+---------
ias-component | process-type | pid | status
----------------------------------------------+---------
wireless | OC4J_Wireless | 5292 | Alive
wireless | messaging_server | 3456 | Alive
wireless | performance_server | 1364 | Alive
Discoverer | PreferenceServer | 2080 | Alive
Discoverer | OAD | 2124 | Alive
Discoverer | OSAgent | 1688 | Alive
OC4J | OC4J_WSRP | 820 | Alive
OC4J | OC4J_Portal | 4264 | Alive
OC4J | OC4J_BI_Forms | 5020 | Alive
OC4J | home | 4948 | Alive
WebCache | WebCacheAdmin | 1976 | Alive
WebCache | WebCache | 3500 | Alive
HTTP_Server | HTTP_Server | 1912 | Alive
dcm-daemon | dcm-daemon | 5048 | Alive
LogLoader | logloaderd | N/A | Down -
DB 9i - TNS-12500: TNS:listener failed to start a dedicated server process
hi all,
I have a problem with the following configuration oracle 9.2.0.1 (32bits) on Win server 2003 - enterprise x64 edition - 10GM of RAM.
I installed DB without problem, run server, started listener - seems all is fine. But when trying a remote connection, "listener failed to start a dedicated server process"
log listener -------
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=2100))(Presentation=FTP)(Session=RAW))
04-MAR-2010 05:31:04 * service_register * PRESS * 0
04-MAR-2010 05:31:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Administrator))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153092352)) * status * 0
04-MAR-2010 05:31:36 * ping * 0
04-MAR-2010 05:31:39 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRESS)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_1\bin\sqlplus.exe)(HOST=MMARFELLA-NB)(USER=mmarfella))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.103.28)(PORT=2838)) * establish * PRESS * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I ask You, because I am not too familiar with Windows environment and very likely I forget/miss something obvious (in this env).
Thanks in advance
MarfyI solved installing upgrade to 9.2.0.8.
Now It's all OK.
Regards
Marfy -
Event logs fails to start on Exchange Server 2010
My Exchange server 2010 R2 SP1 Enterprise single server is down. All exchange services fail to start. It appears like the Microsoft Exchange Active Directory Topology service isn't starting which is a dependency for all other services.
The error I get when trying to start this service is:
Windows could not start the Microsoft Exchange Active Directory Topology on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code
-2147024882
To make matters worse, the event viewer is not starting either.
When trying to start the Windows Event Log, I get the error:
Windows could not start the Windows Event Log service on Local Computer. Displays Error code 5
This is running on a Windows Server 2008 R2 SP1 Standard box.
Any assistance is appreciated.When trying to start the Windows Event Log, I get the error:
Windows could not start the Windows Event Log service on Local Computer. Displays Error code 5
Hi,
Based on this error, this problem happens if any of the following conditions are true:
The built-in security group EventLog does not have permissions on the folder %SystemRoot%\System32\winevt\Logs
The Local Service account does not have default permissions on the following registry key: HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability
To solve this problem, we need to restore the default permissions in the list below on %SystemRoot%\System32\winevt\logs.
Authenticated user - List folder/read data, Read attributes, Read Extended attributes, Read permissions
Administrators - Full control
SYSTEM - Full control
EventLog - Full control
Please try the following methods:
Method 1
To restore the default permissions on folder %SystemRoot%\System32\winevt\logs, follow these steps.
Right-click on %SystemRoot%\System32\winevt\logs and select Properties.
Select the Security tab.
Click Edit button and click the Add button in the permissions dialog box.
In Select users, computers, or Groups dialog box ensure that under object types Built in Security Principals and the location as local computer name is selected.
Enter the object name as "NT SERVICE\EventLog" without quotes. And click OK. This group should have full control on the folder.
Once EventLog group is added add the rest of the groups with above mentioned permissions.
Method 2
Identify a Windows Server 2008 machine with default permissions.
Click Start, and then type cmd in the Start Search box.
In the search results list, right-click Command Prompt, and then click Run as Administrator.
When you are prompted by User Account Control, click Continue.
Type the command CD %SystemRoot%\SYSTEM32.
Once the working directory is changed to %SystemRoot%\SYSTEM32 type the command icacls winevt\* /save acl /T.
This will save a file named ACL in %SystemRoot%\SYSTEM32. Copy this file to the C: drive on the problem computer.
On the problem computer, open command prompt with administrator privileges (refer to previous steps 1-3).
Change the working directory to %SystemRoot%\SYSTEM32.
Execute the command icacls winevt\ /restore acl.
Default permissions on the registry key HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability should be:
CREATOR OWNER - Full control
SYSTEM - Full control
LOCAL SERVICE - Query Value, Set Value, Create Subkey, Notify and Delete
Administrators - Full control
Users - Read
To set the permission on this registry key:
Click the Start menu, select Run and type Regedit.
Go to the location HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability.
From the Edit menu click Permissions.
Add the permissions for the accounts as listed above.
In addition, Exchange 2010 SP1 and SP2 are end of support.
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?alpha=exchange%20server%202010&Filter=FilterNO
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Failed to start Oracle Weblogic Server node in 11g
Hello friends,
I have a problem starting the Weblogic Server node Oracle 11g (10.3.5).
Any suggestions to solve the problem
Logs----------------------------------------------------------------------------------
<Nov 3, 2011 12:33:03 PM> <INFO> <NodeManager> <Server output log file is '/opt/middleware/user_projects/domains/DomainOWL/servers/Server01/logs/Server01.out'>
<Nov 3, 2011 12:33:07 PM PET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 3, 2011 12:33:07 PM PET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 3, 2011 12:33:11 PM PET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 19.1-b02 from Sun Microsystems Inc.>
<Nov 3, 2011 12:33:18 PM PET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Nov 3, 2011 12:33:24 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 3, 2011 12:33:24 PM PET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 3, 2011 12:33:25 PM PET> <Notice> <Log Management> <BEA-170019> <The server log file /opt/middleware/user_projects/domains/DomainOWL/servers/Server01/logs/Server01.log is opened. All server side log events will be written to this file.>
<Nov 3, 2011 12:33:25 PM PET> <Warning> <NodeManager> <BEA-300043> <Node manager native library not found - server process id not saved.>
<Nov 3, 2011 12:33:26 PM PET> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that a native performance library is in: '"/opt/jdk1.6.0/jre/lib/sparcv9/server:/opt/jdk1.6.0/jre/lib/sparcv9:/opt/jdk1.6.0/jre/../lib/sparcv9:/opt/middleware/patch_wls1035/profiles/default/native:/opt/middleware/patch_ocp360/profiles/default/native:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64/oci920_8:/usr/jdk/packages/lib/sparcv9:/lib/64:/usr/lib/64"'
>
<Nov 3, 2011 12:33:37 PM PET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 3, 2011 12:33:40 PM PET> <Warning> <Store> <BEA-280101> <The persistent file store "_WLS_Server01" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<Nov 3, 2011 12:33:49 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 3, 2011 12:33:49 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of oimClusterT.>
<Nov 3, 2011 12:34:26 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 3, 2011 12:34:27 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 3, 2011 12:34:27 PM PET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file /opt/middleware/wlserver_10.3/server/lib/DemoIdentity.jks.>
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/middleware/wlserver_10.3/server/lib/DemoTrust.jks.>
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0/jre/lib/security/cacerts.>
<Nov 3, 2011 12:34:33 PM PET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunPKCS11-Solaris RSA public key, 512 bits (id 58638024, session object)
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 15:12:27 PET 2002,
To: Tue Mar 22 15:12:27 PET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 3, 2011 12:34:33 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:33 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 192.168.1.10:7006 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.10:7005 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Server01" for domain "DomainOWL" running in Production Mode>
Exception in thread "[STANDBY] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:217)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Exception in thread "[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:36:27 PM PET> <Error> <HTTP> <BEA-101020> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "Timer-1" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:36:53 PM PET> <Error> <HTTP> <BEA-101020> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:36:24 PM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:36:33 PM PET> <Error> <JMX> <BEA-149501> <An exception occurred while registering the MBean com.bea:Name=idmAdminServerT,Type=Server at property WebService.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '24' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:37:16 PM PET> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Exception in thread "[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:39:41 PM PET> <Error> <HTTP> <BEA-101216> <Servlet: "CoordinatorPortTypeServlethttp" failed to preload on startup in Web application: "wls-wsat.war".
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:42:32 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:43:15 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:43:26 PM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:45:53 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "weblogic.timers.TimerThread" java.lang.OutOfMemoryError: PermGen space
Thanks<Nov 4, 2011 11:42:08 AM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
Truncated. see log file for complete stacktrace
>
<Nov 4, 2011 11:42:34 AM PET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
at java.lang.Class.getDeclaredMethod(Class.java:1935)
at java.io.ObjectStreamClass.getInheritableMethod(ObjectStreamClass.java:1349)
at java.io.ObjectStreamClass.access$2200(ObjectStreamClass.java:52)
Truncated. see log file for complete stacktrace
>
The WebLogic Server encountered a critical failure
Reason: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "main" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 4, 2011 11:44:08 AM PET> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Exception in thread "[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 4, 2011 11:44:43 AM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
I made the change and continue with the same problem, you can tell me which file should make this change, very grateful -
Failed to start java application server 8
hi every body,
hi every body,
i am getting the famous error:
" failed to start sun java application server 8 possible causes:
-port conflict
-incorrect server configuration(domain.xml need to be corrected manually)
-corrupted deployed application preventing server to start (domain.xml needs to be modified) "
the thing is that i know the cause of error it is the 3rd one since i had some exception while running a project and since on this error was appearing,and i didnt know how to solve this problem i.e how to edit the domain.xml file
so i uninstaled and reinstaled the java cretor a number of times every time i face the problem, but the last time i did so the folder C:\Sun\Creator\SunAppServer8\domain that contains the file domain.xml was not even there and i dont know why did that happen or how to solve it
please help,
regards.i too have a similar problem - mine seems to be related to MySQL access but I cant find any help on the problem - surely there is a better way than to continually re-install - on the previous version i could work it out without a re-install but not with the update.
i havent found anything in the server logs - they are huge docs - i cant see how it can be a port conflict as its ok 1 minute and not the next.
i just need a pointer to where to look ?
thanks in advance -
Failed to start Apache Web Server
I can not start apach aftre the upgrade of the system
/etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
#LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>There are many topic related to problem with Apache 2.4 upgrade. Search the forum.
Maybe you are looking for
-
701 Mail, Calendar, Social network and Web bug.
Hello im pretty satisfied with my 701 but just right now i started to experience bugs. let me explain Calendar- sometime (always when i go through widget) when i open a calendar, it opens a speciffic day (the one that is actual), and im unable to sel
-
FB 4.7 No Longer Validates AIR Version For Projects?
Hi, I migrated my FB 4.6 project over to 4.7, which in the app descriptor xml specifies the minimum AIR SDK to use is 3.5. Since 4.7 only has 3.4, I would expect FB to report this as a problem. FB 4.6 always did. Now 4.7 does not seem to care. The wo
-
My requirement is to hide page options for users and to enable the same for Administrator. I referred method one from this site. http://mustafamyalcin.blogspot.com/2010/04/hide-page-options-button-from-non-admin.html This option worked only for one d
-
Hi I would like to upgrade my broadband and calls package from option 1 to option 3 because I want unlimited broadband. I already have the latest hub from BT but as the package upgrade total page appears it shows a £6 delivery charge for the same hub
-
Why is my execution highlight button not available?
All Debugging buttons are unavailable. they are unavailable in any Vi, even a new blank one. I have tried the following ideas without success. Vi Properties, execution, Allow debugging is ticked, Rentrant execution is not ticked, and prioriy is no