NULL value not validated for a Required field

Hi,
I have added a MessageLovInput item to the expense header page (/oracle/apps/ap/oie/entry/header/webui/GeneralInformationPG), and have made the Required Value to True. But I do not get any error when I navigate to the next page without populating the field. If I enter in incorrect information, it validates it against the LOV, but not for null values.
Any pointers to make the field validate NULL values?
Thanks,
Ashish

Yeah.. I can see the Required field indicator (*) next to the field. I have tried with all the values (uiOnly, ValidatorOnly, Yes etc.), but it does not validate NULL values.
I'll try to handle this in the controller, but would prefer if this can be done by personalization.
Ashish

Similar Messages

Balancing segment value is not valid for this ledger

Hello All,
I am getting above error while running the Journal Import.
Can any send me the query to check this details from Backend.
Your help is appreciated.
Thanks,
AB
Edited by: ABA on Jan 6, 2010 6:23 AM

ABA wrote:
Hello All,
I am getting above error while running the Journal Import.What is exact error?
Please also check Note:R12: Consolidation Journal Import Fails With Em30: Balancing Segment Value Not Valid For Ledger [ID 851061.1] and see its helpful
GL Manuals and eTRMs from 10.7 to 11i [ID 66935.1]
You can also check e-trm site for your issue(Interface Table : GL_INTERFACE -Base Tables : GL_JE_BATCHES - GL_JE_HEADERS-GL_JE_LINES -GL_BALANCES)
Regard
Helios

"You must specify a value for this required field" in SharePoint list

HI All,
I have a couple of taxonomy fields in my content type. When I try to add a new item with my content type and save, I'm getting an error message "You must specify a value for this required field" against each taxonomy field. I'm not sure what am
I missing. I deleted the content type and added that again to my list but still no luck. Can someone please help me out? Thanks.
Regards,
SC Vinod

hi
it depends how you updated existing field. We faced with the problem that update of taxonomy site column was not propagated to the lists. In Sharepoint when content type is bound to the list, new hidden content type is created for that list - you may check
it if will enumerate
SPList.ContentTypes property. And when you try to update site column changes may not be propagated to these list content types. In order to update it you need to get reference on a field from list content type and update if explicitly.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Unable to create foreign key: InvalidArgument=Value of '0' is not valid for 'index'. Parameter name: index

I am running an SQL(CE) script to create a DB. All script commands succeed, but the DB get "broken" after creating the last costaint: after running the script, viewing table properties of Table2 and clicking on "Manage relations" gives the following error: Unable to create foreign key: InvalidArgument=Value of '0' is not valid for 'index'. Parameter name: index. Wondering what does that refer to...
Here it is the script. Please note that no error is thrown by running the following queries (even from code that passing the queries by hand, one-by-one to sql server management studio).
CREATE TABLE [table1] (
[id_rubrica] numeric(18,0) NOT NULL
, [id_campo] numeric(18,0) NOT NULL
, [nome] nvarchar(100) NOT NULL
GO
ALTER TABLE [table1] ADD PRIMARY KEY ([id_rubrica],[id_campo]);
GO
CREATE UNIQUE INDEX [UQ__m_campi] ON [table1] ([id_campo] Asc);
GO
CREATE TABLE [table2] (
[id_campo] numeric(18,0) NOT NULL
, [valore] nvarchar(4000) NOT NULL
GO
ALTER TABLE [table2] ADD PRIMARY KEY ([id_campo],[valore]);
GO
ALTER TABLE [table2] ADD CONSTRAINT [campo_valoriFissi] FOREIGN KEY ([id_campo]) REFERENCES [table1]([id_campo]);
GO
Sid (MCP - http://www.sugata.eu)

I know this is kind of old post, but did this realy solved your problem?
I'm getting this same error message after adding a FK constraint via UI on VS2008 Server Explorer.
I can add the constraint with no errors, but the constraint is not created on the DataSet wizard (strongly typed datasets on Win CE 6) and when I click "Manage Relations" on the "Table Properties" this error pop out:
"InvalidArgument=Value or '0' is not valid for 'index'.
Parameter name: index"
Even after vreating my table with the relation in SQL the same occurs:
CREATE TABLE pedidosRastreios (
    idPedidoRastreio INT NOT NULL IDENTITY PRIMARY KEY,
    idPedido INT NOT NULL CONSTRAINT FK_pedidosRastreios_pedidos REFERENCES pedidos(idPedido) ON DELETE CASCADE,
    codigo NVARCHAR(20) NOT NULL

IFS-12635: SimpleXmlParser: Value(10/10/99) not valid for type (Date)

I am trying to uplaod an xml document sample which has an attribute of date datatype.
My sample is :
<?xml version="1.0" standalone="yes"?>
<document>
<name> test</name>
<createdate>1999/03/12</createdate>
</document>
I am getting this error:
IFS-12635: SimpleXmlParser: Value(10/10/99) not valid for type (Date).
If I input just the "name attribute" value, there is no problem. What is the date format, I should use?
Please suggest.
Thank you
null

Is there any way to specify the format in the custom type document itself. ? I do not want to specify the format in every document sample. Is there any way that it is possible. If I give the format in the document samples, as Matt said, there is no problem.
Now I tried to give the format in the type document itself.
I created a custom type document as follows:
<?xml version="1.0" standalone="yes"?>

<ClassObject>
<Name>myTestType</Name>
<Description> myTestType Document </Description>
<Superclass Reftype ="name">Document</Superclass>
<Attributes>
<Attribute>
<Name> Category </Name>
<DataType> String </DataType>
<DataLength> 80 </DataLength>
</Attribute>
<Attribute>
<Name> posted_date </Name>
<DataType format="mm-dd-yyyy"> date </DataType>
</Attribute>
</Attributes>
</ClassObject>
I could able to upload this to ifs. No problem at this time. But when I try to load the below sample, I am getting the same parse problem.(IFS-12635 SimpleXmlParser: Value(12-25-1992) not valid for type (Date.).
sample xml document
<?xml version="1.0" standalone="yes"?>
<myTestType>
<name> testing.myTestType</name>
<Category>Administration_4</Category>
<posted_date >12-25-1992</posted_date>
</myTestType>
Thank you.

Value BLANK/SPACE not valid for cost element "Fund"

Hi!
We use funds management in our solution. It has worked fine in development but when doing the module tests we get the following error when creating a shopping cart:
Value BLANK/SPACE not valid for cost element "Fund"
When creating a PR in backend we do not get an error. So it should not be a problem in funds management.
Everything works fine when using BBPSC01 (central)
Any ideas?
Sincerely
Anders
Edited by: Anders Öhrling on Sep 29, 2008 11:33 AM

Ple provide the solution for Problem Resolve.

Error : This balancing segment value is not valid for the current ledger

Dear friend,
Error : This balancing segment value is not valid for the current ledger.
when I click Account Assignment in Budget Organization.
I used R12
Thank you
Best regards,
Hareyuya, Junior.

Hi,
Please see these documents.
Note: 756765.1 - Cannot Use Parent Balancing Segment Values In Massbudget or MassAllocation Formula
Note: 790339.1 - Cannot Select Parent Values In Mass Budgets
Note: 437588.1 - Rel 12: Balancing Segment Value Is Not Valid For Current Ledger
Regards,
Hussein

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

F400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.

Hello,
We recently changed to TFS as our bug tracking system and trying to understand how to change the existing states of Bug\Add new states. We installed TFS 2013 Update 4 and followed below process to change state values. For example, I would like to change
Bug State value of "Done" to "Closed",
1. witadmin exportwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /n:Bug /f:C:\TFS\bug.xml
2. Replace all values of "Done" to Closed
3. witadmin importwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /f:C:\TFS\bug.xml
Then we see below error in Work -> Backlog
TF400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.
Learn about how to correct your configuration
Details about the validation error appear below:
The following element contains an error: RequirementBacklog/States. TF401098: This element defines the states for work items that appear on your backlog. The state configuration is incorrect. Each work item on this backlog must have one state with the type
'Complete'. The following work item type does not have any state with the type 'Complete': Bug.
The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems.
The following states do not exist in any of the work item types: Done.
Tried export, made changes to ProcessConfig file for Bug states and imported. Still same issue.
Please suggest on how to proceed with customization of Bug states\values in TFS 2013 Update 4
Thanks,
Aswini

Hi Aswini,
Thanks for your reply.
I tested in on my Scrum 2013.4 team project, and found we need edit two places in processconfiguration.xml file, please try below:
<BugWorkItems category="Microsoft.BugCategory" pluralName="Bugs" singularName="Bug">
 <States>
 <State type="Proposed" value="New" />
 <State type="Proposed" value="Approved" />
 <State type="InProgress" value="Committed" />
 <State type="Complete" value="Closed" />
 </States>
</BugWorkItems>
<RequirementBacklog category="Microsoft.RequirementCategory" parent="Microsoft.FeatureCategory" pluralName="Backlog items" singularName="Backlog item">
 <AddPanel>
 <Fields>
<Field refname="System.Title" />
 </Fields>
 </AddPanel>
 <Columns>
 <Column width="100" refname="System.WorkItemType" />
 <Column width="400" refname="System.Title" />
 <Column width="100" refname="System.State" />
 <Column width="50" refname="Microsoft.VSTS.Scheduling.Effort" />
 <Column width="200" refname="System.IterationPath" />
 <Column width="200" refname="System.Tags" />
 </Columns>
 <States>
 <State type="Proposed" value="New" />
 <State type="Proposed" value="Approved" />
 <State type="InProgress" value="Committed" />
 <State type="Complete" value="Closed" />
 <State type="Complete" value="Done" />
 </States>
</RequirementBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT1311 I have done all of the above but when I try to update my Apps it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

I have done all of the above but when I try to update my Apps on my iphone it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

Hi Friends
Just now we have completed upgrade project from 4.6c to ECC6.0.
After upgrade F4 help is not working for some date fields.
For example its working in MB11,Its not working in va01,vf01 like that.
In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
So if any solution is there to correct this issue.Kindly help me to resolve this asap.
Thanks
Gowrishankar
Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

P6 user name is not valid for connecting to the reporting database

No data is available because your P6 user name is not valid for connecting to the reporting database
I am getting above error in the following environment:
P6 running on wls instance 1.
BI Publisger running on wls instance 2
MS SQL server 2005
Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
(Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
So why do I get the error above?
I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
That did not solve the connection between P6 and BI Publisher though. What am I missing ...
Edited by: user3674522 on 10/11/2011 20:16

Thought I found something but can't repliacte, som issue is still there:
Had a look at the wls instance logs where BI publisher is running, and the error I get is:
111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
Edited by: user3674522 on 10/11/2011 20:17

How to clear alert when a null value is returned for a metric column?

Hey all,
Recently, I've encountered a problem about clearing alert when a null value is returned for a metric column. From Oracle official doc, it seems that NO_CLEAR_ON_NULL could be used for this propose. However, it doesn't.
Here is the line from doc, you can see when NO_CLEAR_ON_NULL is set as FALSE, the null value will clear alert, and the default value for NO_CLEAR_ON_NULL is FALSE.
NO_CLEAR_ON_NULL: This attribute is used to control severity clearing when a null value is returned for a metric column. It defaults to FALSE with the behavior that a null value ends up clearing previous alert severities. With a TRUE value for this attribute, null values will be skipped in severity evaluations without clearing the severity.
TRUE | FALSE (default)
STATELESS_ALERTS: This attribute if set to TRUE indicates to EM that alerts on this
column will not have corresponding clears. This allows the UI to decide whether to
allow users to manually clear alerts on this column.
TRUE | FALSE (default)Here is my code for the metric,
-- meta definition
<Metric NAME="Flushing_Table_Overtime" TYPE="TABLE" HELP="NO_HELP">
 <Display>
 <Label NLSID="mmd_ip">Flushing Table Overtime</Label>
 </Display>
 <TableDescriptor>
 <ColumnDescriptor NAME="State" TYPE="STRING" IS_KEY="FALSE">
 <Display>
 <Label NLSID="mmd_rc_State">State</Label>
 </Display>
 </ColumnDescriptor>
 <ColumnDescriptor NAME="Time_Seconds" TYPE="NUMBER" IS_KEY="FALSE">
 <Display>
 <Label NLSID="mmd_fto_Time_Seconds">Flush Table consume Seconds</Label>
 </Display>
 </ColumnDescriptor>
 </TableDescriptor>
 <ExecutionDescriptor>
 <GetTable NAME="MysqlProcessAggregate"/>
 <GetView NAME="v_flushing_tables" FROM_TABLE="MysqlProcessAggregate">
 <Column NAME="State" />
 <Column NAME="Time_Seconds" />
 <Filter COLUMN_NAME="State" OPERATOR="EQ">Flushing tables</Filter>
 </GetView>
 </ExecutionDescriptor>
</Metric>
-- coll definition
<CollectionItem NAME="Flushing_Table_Overtime">
 <Schedule>
 <IntervalSchedule INTERVAL="10" TIME_UNIT="Min" />
 </Schedule>
 <MetricColl NAME="Flushing_Table_Overtime">
 <Condition COLUMN_NAME="Time_Seconds"
 CRITICAL="30" OPERATOR="GT"
 MESSAGE="There is a Flushing Table command has exceeded %critical_threshold% seconds."
 MESSAGE_NLSID="msg_Flushing_Table_Overtime" />
 </MetricColl>
</CollectionItem>If this feature can not be achieved by coding XML, then is there a way to clear alert with Oracle Package? I have confirm neither sysman.em_severity.delete_current_severity nor sysman.em_severity.clear_alerts could do it.
Would anyone give me a hint?
Thanks in advance!
Best wishes,
Satine

> I am executing in this manner
var RESULT BOOLEAN;
BUT I am unable to create variable with boolean data type.
WARNING. Do not confuse SQL*Plus with PL/SQL.
There is no variable command in PL/SQL. PL/SQL does support the boolean data type.
There is a variable command in SQL*Plus. It allows one to define bind variables. It is limited in the data types it supports. It does not support boolean as a bind variable type.
SQL*Plus is a CLI (Command Line Interface) client tool. It has a very limited vocabularly, allowing you to (primarily):
a) configure its local environment (e.g. size of the terminal ito number of characters per lines)
b) configure its bevahiour (e.g. spooling data to a file)
c) defining substitution and bind variables
And that's it. It is not PL/SQL. It is not SQL. It takes the PL/SQL and SQL you enter, and submit that to the Oracle server. (it does some basic parsing of the data to substitute variables and bind variables where applicable)
Do not confuse this CLI client tool with the server side PL/SQL or SQL languages.

XML Parser Message: Element series is not valid for the content model

Hello,
I work with FrameMaker 8 and DITA.
I change the element prodinfo in the topic.edd from:
General rule: (prodname), (vrmlist), (brand | series | platform | prognum | featnum | component)*
to:
General rule: (brand | series | platform | component)*
When I import the element definition to the template everything is okay.
When I insert the elements metadata, prodinfo, brand, series, platform and component into a topic I get the XML Parser Message that the element brand is not valid for the content model (prodname,vrmlist, ((brand|series|platform|prognum|featnum|component))*).
When I delete the element brand in the topic I get the XML Parser Message that the element series is not valid for the content model (prodname,vrmlist, ((brand|series|platform|prognum|featnum|component))*).
I change the element prodinfo in the topic.edd to:
General rule: (brand)?, (series)?, (platform)?, (component)?
...and get the same Parser Message.
I do not understand that. Is not it allowed to change the EDD this way without changing the DTD?
With kind regards
Nina

Hi Nina... In general, the EDD and DTD need to sync up. You can remove elements from an EDD element definition's general rule, as long as the resulting elements are still valid to the DTD. But if changing a general rule creates an invalid structure, you'll need to also change the DTD to allow the revised structure. With DITA, it is common to remove inline elements from block-level elements. For example, you might want to remove the <msgblock>, <msgnum>, and <msgph> elements from the general rule of the element .. this can be done easily in the EDD and the resulting structure remains valid with the DTD. However, what you're doing leaves the <brand> element as a child of <prodinfo> .. which is invalid. You'll get these errors when saving a file, since this is when the file is validated against the DTD. I do not recommend modifying the structure in such a way that requires you to modify the DTD. If you really need to do this, then you should consider making a specialization to support your revised model. I hope this helps. Cheers and Happy New Year! ...scott

Time stream from resource WC not valid for total display period (PP/DS)

Hi Apo Experts,
As I enter the product view in the PERIOD TAB, this error message pops up "Time stream from resource WC not valid for total display period".
Diagnosis was "The time stream for resource WSMT200_9000_001 is not valid for the general display period. This can cause the display of the time buckets profile for this resource in the product planning table to be inaccurate."
Please, can someone help me understood what was this error mean and the cause? And maybe an idea on how to correct this.
Greatly appreciate your answer!
Thanks in advance,
Raymond

Hi Raymond,
the capacity of a resource in the live cache is generated in the past and in the future according to the settings Planning Parameters (/SAPAPO/RES01) on tab general data. Here the days- and days+ are important.
e.g. the resource has got the following parameters: days- 30 and days+ 180.
Today we have the 1th of January 2008.
After starting the product plan table you can choose the planning horizon from/to.
If the time fence is more than 180 days in the future you will get your message above because planning parameters do not "allow" more than 180 days in the future.
Instead of this the message do not appear if you choose a smaller value.
For more information please see SAP Note 449452.
Hope this helps.
Greetings
Timo

NULL value not validated for a Required field

Similar Messages

Maybe you are looking for