Number of Pallets on layout in case of Invoice Split

Hi,
Ours is a warehouse managed storage location from where we deliver the goods of our Sales Cycle.
IN the Invoice output, we have to print the number of pallets as no of packages, which is fine as we go back through VBFA & get the value of LIKP-ANZPK
But in the case of a invoice split, where the delivery may have 5 pallets but we are only invoicing 2 pallets, it is difficult to create logic to get the data from the Item level from delivery. COuld anybody help with that pls
Thanks

Hi,
I think that you need create your own VOFM subroutines in the copy rule from delivery to invoice. If will be important how to populate the structure ZUK (there are a lot of post about this issue in this forum) to split the invoices. I think that you need be careful with performance, because you must use VBFA table to link HU, delivery and other documents. Try do define the algorithm in this VOFM with an ABAPer.
I hope this helps you
Regards,
Eduardo

Similar Messages

  • Invoice Split due to Foreign trade number

    Hi,
    I am getting Invoice split due to foreign trade number.I do not want to have the invoice split because of this .Please suugest
                    ZF2                                           ZLF
    Copying Req    003
    Determine Export Data  A
    Allocation Number   E
    Reference Number   C
    Regards
    Rahul

    hi,
    you need to create a new copy control routine and ZUKRI( Combination criteria in the billing document) needs to be modified so that splitting do not happen because of foreign trade document number
    Thanks & regards

  • I need to install photoshop cs4 extended from a disk to a new computer because my old computer had a hard drive crash. There is no serial number on the back of the case.  How can I obtain a usable serial number?

    I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash.  There is no serial number on the back of the case.  How can I obtain a usable serial number?

    Find your serial number quickly
    You can activate software without following up and registering it... at least that was the case in the past.  The serial number is normally located on the disc case or a box inside the main box.  If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software.

  • System Extract - Incrementing a sequence number in detail record layout

    I have a system extract for a bank that requires a file header, batch header, detail, batch trailer and file trailer record. The detail record is at the run result level as I am looking to choose all records for a particular deduction (savings bonds) and I also have to put employee ssn and full name. This is working fine. I also have to put a sequence number, ie. detail record layout is record type, length 2, string, record sequence number, 5, ?????, employee SSN, length 9, field, employee full name, length 9, field. I need to increment the record sequence number by one for each detail record in the file. Ie. detail record 1 has record sequence number of 00001, detail record 2 has record sequence number of 00002.
    What type of data element would I set up? For this particular field, I don't need to go against a database field, I only need to keep track of the previous record's sequence number so that I can keep incrementing by 1 until all detail records have been written. The batch trailer has a record count of the number of detail lines and that works fine because I've set that up as a type 'total' with a 'count' of the detail records. I also have in the batch trailer a sum of the pay values from each of the detail records and that works fine as subtrailers allow total data elements where detail records do not.

    You can use any of the below mentioned 2 options in the ctl (Control) file:
    1. SEQUENCE(1,1)
    2. "xxcust_autoinv_seq.nextval"
    where xxcust_autoinv_seq is a database sequence.
    Thanks,
    Angelica.

  • Number pages in sapscript layout

    Hi experts,
    What type of variables normally used in sap script to output data? 
    How do you number pages in sapscript layout outputs? 
    Thanks and Regards,
    Logu.

    Hi,
    ·     &SAPSCRIPT-FORMPAGES&:
    This field contains a number representing the total number of pages of the currently formatted form (any output between START_FORM and END_FORM). The page counter mode (START, INC, HOLD) of the individual pages is ignored. You can use this symbol to formulate information like
    ‘Page x of y’ for your output.
    ·&SAPSCRIPT-JOBPAGES&:
    This field contains a number representing the total number of pages of all forms contained in the currently formatted print request, in other words, of all forms created using the OPEN_FORM, START_FORM.. ENDFORM, START_FORM.. END_FORM,..., CLOSE_FORM function modules.
    &PAGES& current page.
    Thanks,
    Arunprasad.P
    Reward if useful.

  • Error message for over delivery quantity in case of batch split.

    Hi All,
    System is throwing error message if I try to to enter delivery quantity more than target quantity(order quantity) in case of standard process which is ok but in case of batch split when split line created (9000001 for line 10) and if go to item level in line item 900001 and enter delivery quantity more than target quantity system is giving only information message, still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massege as well. Delivery item category for all the line items is same and status B is assigned to over delivery in item category. Is there any standard way of achieving this or do we need any modification, if yes then what user exit need to use.  
    I searched alot about this in last three days but found only one thread which is unanswered, please provide your valuable suggestions. If this problem is discussed already and solved please provide me the link to that thread as I could't find any.
    Thanks,
    Davinder

    Hi
    Still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massage as well.
    I think it you can possible to change the Information message as Warning message.
    Please  go to SE91 put the Message Class XX (Ex:V1) there And in No. field enter the message number (Ex: If message no V1293 enter the number as 293)
    AND
    go for
    where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
    Now with help of ABAP with just comment on these both the messages. Afterwards you will get the Error message.
    Hope this will helps you
    Dasaradha

  • Invoice Split: Sales orders with Differnt PO number

    Hi Experts,
    I was created two sales orders (OR) with different Purchase order number and done collective delivery using VL10, while create the invoice; Invoice was spited based PO number. (Reference doc is delivery I was given)
    I am wondering there was no Purchase order number in delivery document but how system has done Invoice splittingu201D. Can you please explain me How Invoice split had done in above case.
    I have maintained everything stranded settings onlyu2026 
    Thanks in advance,
    Regards,
    Pa1 _Jackson Robert

    Dear vijay kumar      
    This is due to the copy controls in between "VTFL" in that you can find the reference number and assignment number. These fields will be use full to pass the SD information to FI.
    In our issue The  "Reference number" you must have mentioned "A"(Purchase order number) Change this and maintain either D or E.
    Because in sales order you have given different purchase order numbers and try to make ot one single invoice with reference to one single delivery documnet.
    When you are combining the sales documents in to one invoice system is confusing , which reference purchase order number it should take in order to pass the information to FI.
    So it is splitting the invoice.
    Please revert if you have any further clarifications
    Thanks&Regards
    Raghu.k

  • Dispute Case per invoice

    Hi All,
    My client is planning to implement Dispute management. I just wanted to know if we can create one dispute case per customer i.e. one dispute case per multiple invoices of a customer or does it have to be one dispute case per invoice.
    Regards,
    Raj/

    I am trying to writeoff a dispute case. I ran the program UDM_AUTOWRITEOFF. A background job gets scheduled. But there is no spool generated. When I see the job log this is the error I have.
    Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002
    Can anyone help me where should I fix this. I know this is the cost element in  the coding block but where should I fix or do the configuration?
    Regards,
    Raj.

  • Invoice Split due to Tax Departure country and Number of Foreign Trade Data

    Hello Friends,
    With all the search I have done, this question was asked and answered a lot previously, but at the same time most of the previous solutions confuse me or didn't help me to solve the issue.
    My issue is there is a invoice split for a sales order, yes its Order based Billing.
    We had order combinations with two different plants before in the past and had no issues, but this plant is in abroad foreign country.
    So I checked VTFA. ( order - billing copy control )  
    Header:                                                                                                          Item:
    Copy requirment          001   Header/order-related                                 Copying Requiremnets    002   Item / Order related
    Determ.esport data      B                                                                         Data VBRK/VBRP              (Blank)
    Assignment Number     E
    Reference Number       A
    The Billing split analysis shows as:
    Split due to different header Data:
    Fld Name                                          $000000001                                $000000002
    Export indicator                                                                                   Z
    Tax classification 1 for custo              1                                                0
    Number of foreign trade data                                                              0000000667
    Tax Departure Country                       US                                             NL
    Please do offer advice and solutions. Thank you.

    Hi
    First, use SAP Note 11162 - Invoice split criteria in billing document as a checklist. Check it carefully.
    After, subroutine VOFM in Data VBRP/VBRK. Check routine 007 as a template. The idea is populate the field ZURKI (CHAR 40) with a concatenation of strings. Each value is a different invoice. So, if the concatenation is over 40 characters, the do an offsetting of some values. As SAQ MD says, take the help of an ABAPer.
    I hope this helps you
    Regards
    Eduardo

  • How to avoid Invoice Split due to billing date, reference number and payment reference?

    Hi,
    In a scenario of delivery to invoice copying, we are facing issue of invoice split.
    After analysing split, came to know that split happened because of different billing date, reference number and payment reference.
    In VTFL we kept below fields blank at header level:
    Assignment Number
    Reference number
    In VTFL we kept below setting at item level:
    Copying requirements: 001 (this is a del related Pro-forma invoice)
    Data VBRK/VBRP: 001 (Inv.split (sample))
    Also in VF04, at "default" tab maintained billing date, but still system is splitting invoice.
    Split analysis showing below results
    Different billing date
    Different reference number and
    Different payment reference
    Pls let me know how to avoind this split. Do we have to copy routine and do changes into it to avoid split.
    Regards/Pravin

    Hello,
    Also in VF04, at "default" tab maintained billing date, but still system is splitting invoice.
    Split analysis showing below results
    Different billing date
    Different reference number and
    Different payment reference
    this doesn't seem to me standard behaviour (as it regards the billing date). Try the same with VF01: enter manually the billing date, the documents to invoice and press "Billing document overview";  if it keep on splitting according to the billing date, I guess that there's a user-exit during the creation of the invoice, which determines the invoicing date.
    Check the following exit:
    RV60AFZA
    RV60AFZC
    RV60AFZZ
    Best regards,
    Andrea

  • Invoice Split based on number of line items

    Dear all,
    We are on CRM 7.0. We are doing billing in crm for service products . We have a requirement that if the number of line items in the invoice is more than 200, invoice split should happen. Has anyone worked on this scenario and if so pl. let me know how to go about this.
    Regards
    P.Bhaskaran

    might give you better answers.
    If this applies to your processes CRM Web Channel, the work will still be in the CRM backend.
    Easwar Ram
    http://www.parxlns.com

  • How to Create a Sequence Number from BI Publisher Layout editor?

    How to Create a Sequence Number (1,2,3,4,......,etc) from BI Publisher Layout editor

    Thank you for your replay, but <?position()?> we can used it in template builder only not from BI layout editor
    I found a solution in this case we can used the following query.
    SELECT
    ROW_NUMBER() OVER(order by item_status) as Row,

  • How to incrase number of columns in layout

    hi all,
    i am new to business intelligence my problem is
    how to insert number of columns in report layout
    i am not able to more than 5 or 6 columns then
    a pop-up is appearing as "cannot insert column because there not enough space"
    plz give solution
    thanks

    To get IColumnPrefs assuming you have an IDocument I use
    InterfacePtr<IColumnPrefs> colPrefs(document->GetDocWorkSpace(), UseDefaultIID());
    int32 columnCount = colPrefs->GetNumColumns();
    Mike

  • Cannot change number of rows in layout set

    I have created a layout set with a custom Collection Grid Renderer to show XML forms news items. I have changed the <i>number of rows</i> property to <i>3</i> to set the number of items to display to 3, but only one item is displayed.
    I have changed this setting successfully before. Does anyone know why this is happening?
    Thanks in advance!

    Is there really nobody out there who faced this problem?
    Please help!

  • Number od rendrer component instances in case of JTable.

    In case of a Jtable I am using Combo box in one of its column. Now if I have say 10 rows in that table how many combo box instances the JTable will have? Will this number be same irrespective of the renderer component? I mean will it be same for label, button, combo box etc?

    Thanks for quick reply.
    As you have mentioned in your answer there will be a single instance used of the combo box for all the table rows. In that case how can different items be selected when those combo boxes are at different rows?
    Fow example my combo box present at row one can have item_1 selected and the combo box at row two can have item_2 selected.
    if its same instance how this is achived? I am asking specifically about the combo boxes as we can change the selected items in that case even after those are rendered. In case of labels we will have same value which will never change and in that case renderar shall only render and the component will no longer required.

Maybe you are looking for

  • Can't find DLL entry point RegisterGpibGlobalsforThread in ni4882.dll

    I'm attempting to collect data using a gpib-usb interface and display the data in an Excel Spreadsheet using Visual Basic for Applications and NI 488.2 ver 3.1.2 software in Windows 7 64 bit.  The macros in the spreadsheet worked fine using the gpib-

  • Access Denied error while editing interactive forms in NWDS

    Hi, I am getting following error while editing the Adobe Interactive form in NWDS, I didnt understand why i am getting this error please help me in this issue the error i am getting is as follows java.io.FileNotFoundException: C:\Documents and Settin

  • Vector shapes printed jagged - or is it me?

    http://prosol1.com/mw_images/pen_tool_lines.pdf i created the above in ill CS4 [i created the above PDF for you to see].  i printed it direct from the ill file and the curves are not what i thought they would be.  but then again, maybe it's because o

  • ALV grid - spool

    Hi I have a alv grid display. when i run the report in background, i am able to see that a spool number is generated but i dont know how to check whether what is inside the spool is same as in ALV.

  • Idoc between different server

    Hi, I have to carry out the outbound process using idoc with 2 different server with same client number. How i can do the inbound process in receiver side as well as how  i can assign the logical system into the client number in SALE. pls answer for