Number range error in goods movement BAPI

Dear friends
we are using the BAPI BAPI_GOODSMVT_CREATE to create a material reservation with movemnet type 201. although all the fields are maintained properly i get an error number 136 - number range different. i checked the number range and found it to be ok. can anyone please help me out
thanks in advance
Gurvindre

Hi,
Please check and format your table data before sending it to bapi. I mean to say u might be missing conversions or validations for some fields.
I guess the data you are passing in first two lines meets thee bapi requirement without any conversions, whereas same is not the case with other lines od data.
I hope this will help you in resolving this issue and close it.
Appreciate if found helpful!!!
Regards,
Vinit

Similar Messages

  • Use of Number range in Free goods determination Procedure

    Hi,
    Can any body tell me that why we use number range in free goods determination procedure & where it was assigned.
    Thanks & Ragds......
    rashmi

    Hi,
    This facility is provided just to differenciate your free issues documents from normal sales documents and nothing much. This means if you want to make a report depending upon free issues number range then you can get the results as per the free issues number range. For example if you customer has been doing business in various countries and each county wants specific number range for their documents then you'll use an exit which will assign the required number range specific to the country.
    Hrishi

  • Error in Goods Movement during order confirmation

    Hi,
    I am trying to confirm a production order through CO11n,but i am getting an error in Goods Movement .
    The following message is displayed in the log -  "* Posting only possible in /11 anperiods 2008d 2008/10 in company code A100*".  Can any one guide me what should i do to confirm the order without any error in Goods Movement,
    Thanks in advance.

    Hi,
    It is advisable to correct the Goods Movement Errors in COGI in the same period (before closing the period by MM in MMPV). You cannot correct the same if the period is closed.
    Only option is you need to open the closed period in consulatation with FI and MM team members
    OR
    Delete the Error movement records in COGI and post the Goods Issue for the production order in Tcode : MB1A with movt type 261 and go inside and mention the materials which you want to issue to the order.
    Hope this will help you.
    regards
    radhak mk

  • Error in Good Movement

    Hi SAP Gurus,
    I have got a error in Goods Movement. For Production Order no.xxxxxxxxx, there is no error in the COGI report, but if we check it in one of the customized report called Valuated Goods movement failure there is a error for the said Order no. But it is not showing any reasons. I checked it in the database table also. There also the error exist, but it is also not giving any reason. Actually what the user did is they did cancel the confirmation for this Order no for certain quantity.
    Can anyone tell me what should be the reason and how to solve it?
    Regards,
    Rinky

    Hi Andreas,
    Thanks for ur reply. actually the user canceled a Confirmation for certain qty. That canceled confirmation is not re-confirmed. when i check in CO14 - Display Production Order Confirmation against the canceled operation/counter no. It says "Highlighted items need to be processed". How to come to the conclusion that what to do next. how to identify the error. In my customization in OPK4 we have maintained,
    Operation sequence   Error when operation sequence is not adhered t
    Underdelivery             Underdelivery tolerance is not checked        
    Overdelivery               Error when overdelivery tolerance is exceeded 
    QM results rec.         Message if no inspection results exist
    So, could you tell me how to solve this?
    Regards,
    Rinky

  • Error: dependent goods movement was incorrect

    Hi,
    Can anyone help me please correct this error "dependent goods movement was incorrect" (message no. RU 523).  I have encountered this error upon confirmation.
    Thanks.
    Regards,
    Ching

    This error is noticed when production storage location between parent and child in direct production(special procurement
    key - 52) is_ NOT_ similar i.e. mismatch of storage location
    Example:
    Production Order A {Collective parent structure production storage location: 0001}
    |
    |
    |
    Production Order B {Collective child production storage location: 0002}
    In above scenario, prod. sloc is 0002 for child while 0001 for parent, which inturn results in COGI error with error message  TYPE RU 523
    Steps performed for correction:
    1. Cancel the production order confirmation for component
    2. In co02, edit the goods reciept sloc for component under goods reciept tab such that it matches with parent production order storage location
    3. Redo the confirmations for the component production order and reprocess the COGI

  • Accounting Document Number range error

    Dear All,
    As per my client requirement 3 types of billing document is thier. SD Consulant maintain the number range below
    1. Domestic billing (Number range between 000040000- 0000401000 )
    2. Export billing (Number range between  0000900001-0000901000 )
    3. Cash sales billing (Number range between  0000900001-0000901000 )
    In VF01 billing is saved for above billing documents. But not posted into Accounting Documents.
    I am gettin error " Incorrect Doc Number 40000 select the document number between 9000001-901000"
    In my understanding FI Consulant maintain the same number range the Account Document automatically posted in to Accounting. How to maintian the 3 number range in FBN1.Plz help me.
    Thanks and regards
    chandra

    Hi,
    In FBN1  FI Consultant maintain the number range Cash sales billing (Number range between 0000900001-0000901000 . This Cash sales billing posted to account, other billings not posted to accountg. plz guide me.
    Thanks and regards
    chandra

  • Number Range Error in Invoice posting in FI.

    Dear friends,
    I have copied F2 and created another Billing Document Type. A seperate number range series has also been maintained and has been defined in the newly created Billing document type.
    At the time of saving and posting the Invoice with the newly created number range, system is throwing an error and disallowing the document to get posted, till the time the number range is not maintained in the series specified, from "9000000000 to 9999999999".
    Once I am changing the number series in the billing document and maintaining the standard, system is allowing the document to get posted.
    Can anybody help me with a solution, where I can use my newly created number series in any newly created billing document type.
    Rgds,
    Indrajit

    Hi indrajit,
    There is standard setting in accounting document number range so that the accounting document number is same as you billing document number.
    Check you accounting document type .
    Goto transaction FBKP and see the number range assigned to the accounting document type.
    Goto SNRO and give objed RF_BELEG and the series maintaines for the accountion type, if external tick is on the the systems assigns same number.
    for this to happen your billing document number range should fall within the range specified for accounting document.
    Regards
    Rasik Waghela

  • Org Unit Number Range Error...

    Hi,
    Iam trying to maintain the Number Range for Org unit in the configuration.
    I have maintained it like the below
    $$$$     IN     EX
    01C     IN     EX
    01O     IN     EX
    01S     IN     EX
    I have also checked the Plan version which is '01'.
    But when I create an Org unit, it takes the OU number from some where in the middle. It is not even taking from the below setting as well.
    $$$$     IN     EX
    Could you please throw some light on this ?
    Thanks in Advance..
    Regards
    Vijay

    I think you have posted the question in wrong forum , move this to SD

  • Create an EXT number range's delivery by fm/bapi

    Hi,
       I have customized an new delivery type with EXT number range.and I want to write a program to create the delivery reference from.sales order.Is there any FM or bapi can help me create it for the delivery number can be assign by my program.Or is there any demo show me.By the way ,my system is 46c.
    Edited by: Ji Ma on Mar 12, 2009 9:04 AM
    the problem is soluted.
    Edited by: Ji Ma on Mar 13, 2009 8:41 AM

    Hi Ji Ma,
    I dont have any idea if there is any existing FM or BAPI that you can use for delivery creation wherein you can give your auto-generated Delivery Number... So you can try if is there any..
    But in such case you can create Z-Program and you can use BDC to create Delivery where you can Give your auto-generated Delivery Number..
    Thanks,
    Hardik.

  • Number range error in Assessment cycle in CO-PA

    Dear All,
    During performing "Actual Assessment cycle in CO-PA" , system gives the error message
    "An error occurred when the SAP System attempted to determine the document number. No interval was found for number range object RK_BELEG, sub-object 1000".
    When I checked in KEN1 (Document ranges for actual posting) & also checked in
    KANK, it is defined
    Can some one can explain me how to re-solve the same.
    Rgds
    SMK Ganesh

    Hi,
      Please, check transaction KANK, under menu path of SPRO:
    Controlling -> General Controlling -> Organization ->
    Maintain number ranges for controlling documents
    Choose Overview and find the corresponding CO area.
    You will see that there are several business transactions not assigned
    to any number range. One of them should be KSPA Assessment to CO-PA.
    Please, assign this business transaction (and the ones required for other processes) to a number range.
    Then, run again KEU5.
    If the above does not help then check if problem is that you use too many receiver fields in copa cycle.
    The number range object is derived from the co-area and if you are using more than 15 single value receiver fields the system wont consider the settings "behind" the co-area.
    regards
    Waman

  • Error in goods movement during confirmation

    I get an error while doing the goods movement during confirmation stating that posting is not possible during that period.

    Hi,
    If it is MM Posting period problem then check in MMRV and MMPV ..
    In MMRV - u can allow posting to previous periods
    In MMPV -U can close and open periods i think
    If it is CO posting period problem then check in OB52 , Here to get posting period variant for your company code from OBY6 and input in OB52 and check for all accounts the periods , change the periods accordingly for the year..
    regards
    pushpa

  • Error documented goods movements

    Hello PP experts
    I have done the good issue of the components of a process order.
    If I ckeck it in the order in Lits-> documented goods movement, sytem showe me an error  'There is no data for the selection'
    What is wrong? why does not show me the movements of good issue?
    Thanks in advance

    Dear
    Order type dependent parameters- Implementation tab - Documentation of goods movements - Make tick mark for all.

  • OM Number Ranges Error

    Hi Gurus,
    I am getting the following error when I am creating a position through PO13
    NO VALID INTERVAL FOUND (Internal Number Assignment)
    I have done the following settings:
    OOAP: PLOGI     PLOGI          01
    OONC: NUMGR   COMP  Blank
    OONR: 01S  IN EX
               01  10000                    99999    Left the box unchecked as i want internal range
    And I am getting the above mentioned error..
    I have deleted the number range $$$$ which was in the standard system as my friend suggested and it was picking up the only numbers defined in range for $$$$.
    Please suggest what can be done !!
    Regards,
    KPJ

    Hi ,
    Go to TCODE OONR select $$$$ .on screen you mind tab Number rqange Maintainence
    create the number range for this.
    You can create you own sub group
    ypou can ask BASIS Person if thery cipy from standard client.

  • Number range error for some materials when converting into Production order

    Hi,
    Please I need some help with my error.
    When trying to convert planned orders into production orders, I receive an error message saying Internal assignment not defined for number range XX.
    The strange part is that is only happening for two materials! Material type is the same one we always use.
    The planned orders have also the same type.
    Any idea?
    Thanks,

    Hi,
    I think for these 2 materials system is selecting the order type for which external number range is marked and ingternal number range is switched off.
    Can you go to CO01 and create a production order for these materials directly w/o assigning order type on intial screen. check which order type is detrmined by system and check its number range in co86.
    please check.

  • Good Movement - BAPI used

    Hi Everybody,
    I like to know the BAPI's used for
    1. Good Movement Creation (BAPI_GOODMVT_CREATE - I think I am correct here)
    2. Deleting a Good Movement (is it BAPI_GOODMVT_CANCEL - I am not sure about this, pls confirm me the right one)
    3. Updating a Good Movement (?)
    I will really appreciate for your quick response.
    Regards/Guru

    Hi
    use the following BAPI's w.r.t Goods movements:
    BAPI_GOODSMVT_CANCEL         
    Reverse Goods Movements with MB_CANCEL_GOODS_MOVEMENT
    BAPI_GOODSMVT_CREATE          
    Post goods movements with MB_CREATE_GOODS_MOVEMENT
    BAPI_GOODSMVT_GETDETAIL        Display Details for Material Document
    BAPI_GOODSMVT_GETITEMS         Display Detailed List of Material Documents
    Regards,
    Anji

Maybe you are looking for

  • Web Services Returns Runbook Not Found For One User, Not for another

    i am using Web Service to start runbooks.  most users are successful.  but one user gets an error "runbook not found".  the IIS logs show identical requests to the web service, except for the different username.  the user is an administrator on the m

  • Constant network / internet activity

    Once I updated to 10.8 my internet traffic has gone crazy. I have a capped isp- and I have used almost 10gb of internet traffic in 3 days! In Activity Monitor, with Air Port turned on there is constant internet traffic both upload and download, usual

  • Strange behavior from portal

    Hello All, I have a form portlet and a report portlet on the same tabbed page. The form portlet receives the input parameters for the report portlet. The form portlet is based on a stored procedure. The values are passed to the stored procedure and t

  • Warranty cost and returns in export sales.....

    Dear Friends, I had two problems in configuration of sales return order. 1)     When I got returns from export sales order: In this process I choose order type RE and processed with the reference of invoice. It is properly copying the all the data bu

  • Zen V plus "unknown error" while transferring tracks - "Player is busy&qu

    I recently bought three players, 2 Zen V players ( and 4 Gbyte) and oner Zen V-plus player. I transferred music to the two Zen V player without problems. When I try to transfer music to the Zen V-plus player, I can only transfer one or two songs and