Number range of confirmation of service

what transaction code can we check the number range of confirmation of service.
thanks.

Hi,
You can create the number range from transction - SNRO assign the same in IMG.
or
In IMG under
Materials Management -> External Service management -> Number Ranges
-> Define Number Range for Service Entry Sheet
-> Define Internal Number Range for Service Specifications
-> Assign Number Range
Regards,
Naveen.

Similar Messages

  • Number range creation for new service order type

    Hi,
    Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
    Thanks and Regards

    HI,
    You just define number range in tcode VN01, but remember that number ranges are not transportable.
    Once you define number ranges in development, do the same in quality & production client.
    Then attach number ranges in document type & transport this config to quality & production
    Please see that before transportating, the number ranges must have been created in quality & production thru VN01.
    Hope this helps you
    Regards
    Dhananjay

  • Number range of the "Confirmation of Service".

    Hello, LE Experts,
    I have a question about the number of "Confirmation of Service".
    After completeing "Confirmation of Service" by VL02N, I can find its number in the document flow screen.
    I want to know where I can find the number range for "Confirmation of Service" and if user have to care about overflow or not.
    Regards,
    Jun Shibata

    I found theanswer in note 578766 ('Confirmation of Service' entries in doc flow disp (contd)) .

  • Service Entry Sheet & Accounting number range

    Dear Experts,
    While I'm trying to Release a Service Entry Sheet this error appear :
    +Error analysis+
        +Short text of error message:+
        +Document number ENR 5000000000 2010 was already assigned+
        +Long text of error message:+
         +Diagnosis+
             +Document number 5000000000 in company code ENR and fiscal year 2010+
             +has already been assigned.+
         +System Response+
             +Termination of processing.+
         +Procedure+
             +Check document number range 50 in company code ENR and fiscal year+
             +2010 and correct the number range status if necessary.+
        +Technical information about the message:+
        +Message class....... "F5"+
        +Number.............. 152+
        +Variable 1.......... "ENR"+
        +Variable 2.......... 5000000000+
        +Variable 3.......... 2010+
        +Variable 4.......... 50+
    I think t is related to the FI document that should be created from the Service Entry Sheet and the number range assigned for it
    Please Advice
    Best Regards

    Yes, it seems you are right. Check the current number ranges using TCode FBN1 to know the current status for number range number 50 for your company code. Material documents are not company code specific.
    To know the status of the document in the table, check table BKPF and read the table for your company code, year 2010 and document number 5000000000 to 5000001000 and check how many entries are already there. Change the status of the number range in FBN1 to a number higher than the max in the range (This may be done by FI consultant).
    Regards,
    Aroop

  • Service order number range creation

    Hi,
    Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
    Thanks and Regards

    Hi,
    Please guide me what should we first do to transport the service order type transport request to prd.
    1.Should we first transport the request for other components of the service order type?
    2.Then should we transport the request for number range or we directly create it in production server?
    Please guide.
    Thanks and Regards
    Edited by: MPVash Vash on Sep 8, 2008 7:53 AM

  • Create number range for Service Entry Sheet (SES)

    I would like it is possible to configure the number range for Service Entry Sheet (SES) or it is fixed in the system? Besides, for my current configuration, the number only appear when SES is done but no reversal number if I reversed the SES, is this a correct setting? Or is there any way I can set the number for reversal document?

    Hello,
    Check below SAP link.
    http://help.sap.com/saphelp_40b/helpdata/fr/77/e12c7dd435d1118b3f0060b03ca329/content.htm
    Hope it will help. Revert back if anyfurther question/s.
    Regards,
    Anup

  • Number range for service master record

    Hi..
    i have an issue in number ranges for service master record.
    when i create a service master record system is generating number ramdomly, its not in series..
    where do i make the settings so that i will get service master number ranges in series...
    Regards
    Sarfraz

    Hi,
    Follow the path:
    SPRO ->Material Management -> External Service Management ->  Service master ->  Define Number Range
    In menu ->Group-> maination->Aagian Group-> Insert
    Now Enter
    Number  Range  Group Text     01( example)
    From Number      80000000
    To Number     89999999
    & save.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on Apr 4, 2008 8:45 AM

  • External number range for service items?

    I want to create Purchase order with services using BAPI. Is it possible to set external number range for the extrow / introw, so that if I need to change a service line item, I will be able to find out which service item needs to be changed.

    It depends on whether you have a service master or not.
    1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
    2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
    Makes sense?
    A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
    Regards,
    Ravi
    Message was edited by: Ravikumar Allampallam

  • Number Ranges for Service Order

    Hi All,
    I want to create no. range for service order.
    Generated no. should contain plant code as well.
    eg VSC00AA001
    here V is hardcoded
       SC00 is plant code &
      AA001 is no. generated from no. range.
    Pls. tel me how to proceed...
    bye,
    Pranjali

    This alpha-numeric format is not possible directly with SNRO settings.
    You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
    Regds
    Manohar

  • Confirmation Number Range

    Dears,
    While doing PM order confirmation through IW41 we are getting error message as Update was teminated. When we analyzed this is because of number range conflict. Where do we maintain this number range?
    Kindly advice
    Senthil

    Hi,
    Once you create the Order, confirmation number will be assigned to that. While doing confirmation, against that predefined number, that confirmation will happen.
    Give the order number (AUFNR) as input in AFKO table to get the Operation Task list number (AUFPL). Give AUFPL value in AFVC table to get the assigned confirmation number.
    Against that number only, old confirmation will happen. Only for the new orders, new confirmation number range will be assigned.
    Regards,
    Maheswaran.

  • Different material document number range for Services

    Hi,
    I want to make different material document number range for services.
    I have created ZE document type from WE .
    But if I see group in OMBT , i am not able to assign ZE there. How to do this?
    Regards
    Kedar

    Hello,
    No ! I am not able to see ZE there.
    Kedar

  • Number range for service desk

    hello,
    i have some questions regarding number ranges:
    which are the default number ranges groups?
    what number range should i use for service desk?
    thx

    Hi Galan,
    I'd post the answer but the forum nanny is saying I have posted forbidden words and phrases. Even though it was just a frew quick sentences.
    Forum Admins, can we get this thing removed? It's annoying and bever tells you what is flagged.
    Jason

  • Service Desk (Configuration in R3 systems) [Number Range Issue]

    Hi,
    I am using Sol Man 3.2 version.
    I have established the RFC connection between Sol Man and R3.
    When I create a Support Message from R3 system, I am getting the below error
    “<b><i>Error in Local Message System: For object DNO_NOTIF , number range interval 03 do Message was Not Created</i></b>”.
    This is a case where there is a mismatch between the number range.
    <b>Is there any setting I have to do in the R3 system to enable the correct number range.?</b>
    Because, when I login to my Sol Man system and create a support message, I am able to create the support Message and I can see the message in Transaction Monitor.
    I am unable to create support Message from R3 system.
    Regards,
    Vikas

    Dear Vikas,
    Please logon to your R/3 System which is configured in your Solution Manager Landsacpe.
    Follow the below steps now
    1. Run Transaction SM30.
    2. Table Name "BCOS_CUST"
    3. Maintain Entries as shown below ( column info )
        a. Appl - OSS_MSG
        b. + - W
        c. Dest. - SM_<SID>CLNT<Client#>_TRUSTED
        d. + - CUST620
        e. + - 1.0
    4. Save the Entries
    5. Click on Help Menu -> Create Support Message.
    Now enter the appropriate information in the message window and click on send button.
    Once you will get the notification of support message creation, logon to your solution manager system and run transaction crm_dno_monitor and check the support message.
    I hope this info will help you to create message from your R/3 system to solution manager.
    Thanks,
    Avinash

  • Just to confirm this feature in number range object

    Hi all,
    I've created one number range between 00001 to 99999. And i hope it will start over again automatically from 00001 after hit the upper limit.
    I did not choose the "No Interval Rolling". Is that all i have to do?
    thanks.

    Hello,
    I think this is correct.
    From the F1 help from the field you can see:
    Flag: No rolling of intervals
    Selecting the flag prevents the number range object intervals from automatically starting from the beginning at the upper limit.
    Regards,
    David

  • Classic & EC -  PO & other purchasing documents number range

    Hi SRM Gurus,
    Can any one please explain me more precisely about number ranges in SRM & MM.
    For classical scenario, we will define number ranges for PO & other purchasing documents in SRM as internal number ranges and in MM as external number ranges.
    But in Classical scenario we will create POs (or other Purchasing Documents) in backend system. Suppose If it is to be replicated to SRM as per business need, then how system works. Because we defined in SRM PO number range as internal number range and in backend system as external number range.
    Again in Extended Classical scenario, for MRP materials PR or Reservation will be created in backend system with internal number range. But in Plan-Driven scenario they will be replicate to SRM. In this case how we have to choose number ranges.
    I am confused. I'll appreciate if any one explains me with step by step or with examples for Classic and Extended classical scenarios
    Points will rewarded
    Thanks,

    Hi,
    Please find my responses in bold below:
    For classical scenario, we will define number ranges for PO & other purchasing documents in SRM as internal number ranges and in MM as external number ranges.
    Sundeep: In Classic Scenario, you do not define number ranges for PO internally in SPRO. You would only define number ranges for shopping carts, Confirmation and Invoices if required. Please see description of classic and extended classic scenario below.
    External number ranges are defined for PR's and PO's in ECC in a classic scenario environment. (No Internal number range is defined in SRM for these documents in classic scenario and a shopping cart is a PR in SRM)
    So, basically in classic scenario, you create only a Shopping cart (Internal Number Range) and all follow on documents such as PR, PO etc are created as external number ranges in ECC, which are a result of a shopping cart from SRM having an internal number range locally.
    But in Classical scenario we will create POs (or other Purchasing Documents) in backend system. Suppose If it is to be replicated to SRM as per business need, then how system works. Because we defined in SRM PO number range as internal number range and in backend system as external number range.
    Sundeep: This scenario is not possible. In classic scenario you cannot replicate the PO back to the SRM system. Such a scenario is usually accomodated by an Extended Classic Scenario.
    Again in Extended Classical scenario, for MRP materials PR or Reservation will be created in backend system with internal number range. But in Plan-Driven scenario they will be replicate to SRM. In this case how we have to choose number ranges.
    Sundeep: In a Plan driven procurement the PR is created in SRM as a shopping cart with internal number range. (PR = Shopping cart in SRM). No reservations are created locally in SRM from a PDP. Reservation are only possible in a Classic scenario from SRM -> R/3.
    · The classic scenario
    The shopping cart is created and approved in SAP Enterprise Buyer. The remainder of the procurement process takes place in the backend ERP system(s) and all other follow-on documents, such the purchase order, goods receipt/service entry sheet and invoice, are located there. With SAP Supplier Self-Services, you have partial supplier involvement for the operational procurement business scenarios when buying materials. There is no support for services.
    · The extended classic scenario
    The shopping cart is created in SAP Enterprise Buyer. The purchase order and follow-on documents are also created there and then replicated to the backend system. The purchase order in SAP Enterprise Buyer is the leading purchase order and cannot be changed in the backend system. Goods receipts and invoices can be pre-entered in SAP Enterprise Buyer or entered directly in the backend system. With SAP Supplier Self-Services, you have partial supplier involvement for all your operational procurement scenarios. In these scenarios, you have supplier involvement for the purchase order and the purchase order response.
    Hope this info helps !!
    Pls assign points for usefull answers !!
    Sundeep
    Message was edited by:
            Sundeep Ravande

Maybe you are looking for