Numbers for iPad crashes every time I try to open the date and time keyboard.

I had numbers 1.6.2 installed on my iPad 2 with 5.1.1
I can use every feature without problems, but when I try to open the date time keyboard input method it crashes invariably. I tried to fiddle with language, keyboard, region settings and calendar as noted in other posts b to no avail.
Any idea?

Hello, I have the same problem. I have an iPad2 with OS 6.01 and Papers, Numbers and Keynote crash every time I try to open a file. Furthermore, I saved the Getting Started file and when when I tried to open it again the software crashes. Any idea about what is going on?

Similar Messages

When I try to adjust the date and time of an event by selecting Photos from iPhoto, the year I enter is altered.

I have images in iPhoto from an older digital camera which did not record the date and time. In iPhoto, with an event selected, I have tried to adjust the date and time by choosing Photo. When I adjust the date and check Modify original files, it makes the date much earlier--in centuries. I now have an event from August 2003 (the date I entered) which reads June 2, 1251 under the event! When I attempt to correct it, it goes back further in time. What am I doing wrong?

(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN

My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

HT2473 How can I get the date and time back on the menu bar?

Several items disappeared from my menu bar for no reason known to me. I miss the date and time and want it back. Please . I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
What should be my next move?

One more thing might help us
In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
ÇÇÇ

I reloading LR onto a new lap top. I have the orginal LR 1 disk with correct Serial #. I have downloaded it, every time I try to open the program I get the "Do you want to buy or I have a Serial Number Page". I fill out the page include the seria

I reloading LR onto a new lap top. I have the orginal LR 1 disk with correct Serial #. I have downloaded it, every time I try to open the program I get the "Do you want to buy or I have a Serial Number Page". I fill out the page include the serial # accept terms and enter. All fine and good seems normal. When I try to open LR I get the damn "Do you want to buy" page. I do I get past this BS?

What version of LR are you trying to activate? A serial number for LR 1 will not activate LR versions 2 - 5, but it will enable you to purchase LR 5 at the upgrade price and activate it.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

Hi JN and Barry,
Barry wrote:
The second case may not be included in the available D&T formats in Numbers 3
For my region, the Date & Time data formats include month.
The Date Pop-Up
This may not be the case for all regions.
Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
Regards,
Ian.

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

Hello everyone, How do I add by default a date on the actual E-mail page the date and time of when I have sent the e-mail ? Thank you very much for your suggestions. Kind regards, Christopher H. Bull, Birmingham, UK.

Birmingham, Thursday 2. Feb. 2012
To whom it may concern,
I have an issue regarding the e-mail system, and I wanted to know how I can add a default that the date and time is added automatically to the E-mail page everytime I draft a new e-mail.
Does anyone know how do create a "plug-in" to enable me to have the date and t ime posted on the e0-mail page every time i send a new e-mail ?
If there is a plug in which is compatible with Lion iMac computers thart insert the date and time into every E-mail I send ?
Kind regards
Christipoher H. Bull
E-mail: [email protected]

This supports macros and variables, it doesn't specifically state date and time, but if it supports variables I'd be surprised if it didn't have variables for those:
http://email.about.com/cs/mailplugins/gr/mailtemplate.htm
This one also supports variables and may do what you want:
http://itunes.apple.com/gb/app/logical-mail-free/id451881152?mt=12
You may want to look for more, I found those by googling 'mac email templates variables'.

Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My macbook pro keeps crashing and resetting the date and time

I'm having a problem with my 2010 Macbook pro(ios6.1) with crashing. After it happens I need to reset the date and time. I also have a problem with iphoto, the program won't open. I have reintalled it serveral times and after the update it won't open just the circulating circle appears. I'm running on Mac OS X version 10.6.8 If any one can help it would be greatly appreciated. D.D.D

If you have to reset the date and time, it may be that there is a power interruption. I would try a SMC reset.
http://support.apple.com/kb/HT3964
I would post you iPhoto issue in the iPhoto forum.
Ciao.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help. The MacBook Pro is one day old.
Thanks

Hi, Im am also having this same problem,same message, trying to make a photobook with a non-refundable voucher. my Macbook pro is like 2 months old and im up to date with all of my updates.
What ended up happening with this problem for you because, Ive emailed cheese123 3 times and they haven't replied???
Can you help me? Thanx

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
=IF(I127,NOW()," ")
I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?

I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
If you want you can assign the service a keyboard shortcut in System Preferences here:
SG

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

Numbers for iPad crashes every time I try to open the date and time keyboard.

Similar Messages

Maybe you are looking for