Numbers of PR skipping during MRP

Dear All,
I am facing a peculiar problem, wherein when I run MRP, PR's are getting generated but the number of these PR's are not continuous, there are some numbers which are getting skipped. & there are no records of these missing numbers in table Eban.
Kindly suggest some solution, so that the numbers of the PR's do not skip after running the MRP

Hello Guys,
Can somebody give me some solution.
regards,
dgn21

Similar Messages

PP BOM explosion during MRP

Hello all,
During MRP, BOMs for dependent assemblies are supposed to be exploded. I am running MRP in the background. Until recently, MRP is exploding only the first level BOMs such that subsequent assemblies are not exploded. Is there a setting I can check to ensure that BOM is doing a multi-level explosion. MRP set to NETCH. Thank you for your input.
Joy T.

Dear Joy,
1.check whether the BOM status is 1 for the dependent assemblies in the BOM header.
2.In case if you have used change numbers with release key for creating the BOM for those dependent assemblies,then check
in CC02 whether the release key is set.
3.Ensure that the MRP type is not ND.
Also check this thread whether this can help you,
MRP RUN NOT EXPLODING BOM
Regards
Mangalraj.S

Consideration of stock of discontinued FG or trading material during MRP Run

There is an functionality of follow up material for component. I would like to know if there is any similar option available for finished goods or trading materials.
I am doing procurement planning for externally procured Trading materials. Now my previous material A is being replaced by material B. Therefore all the planned independent requirement is available in system only for B. But still there is some stock available for material A. How can it be considered during MRP run for material B.
Example,
Material A:
On Hand Stock = 100
Planned Independent Req. = 0
Material B:
On Hand Stock = 300
Planned Independent Req. = 1000
In this case if we run MRP for material B, how we ask system to plan Purchase Requisitions for 600 instead of 700 for material B, considering stock of material A.

Hello
Please refer to the following SAP note:
43636 - Discontinued parts
This note provides a detailed explanation of the system standard design of the usage of discontinued parts with material requiremenst planning and the most common questions about this issue.
The following information is provided on this note regarding the PIRs:
2. Planned independent requirements and forecast requirements are not redirected.
Explanation: Planned independent requirements after the effective-out date are not redirected but are provided with an exception message in the MRP list stating that they cannot be included in the availability check. Planned independent requirements and forecast requirements are therefore displayed in the MRP list and in the stock/requirements list. However, they do not influence planning
BR
Caetano

ITunes skipping during audio while browsing the web - Quicktime issue?

iTunes 11.1.2 for Win 7 is skipping during playback of audio when I am browsing the web. Is this a Quicktime issue? I tried changing the audio output device latency but it didn't do anything different as far as skipping goes. Any suggestions?

Actually, that doesn't work either. Here's the solution that is working consistently:
Go to iTunes, and Preferences > Playback tab > Play Audio Using > Windows Audio Session instead of Direct Sound. There we go, that works!!

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

How to consider sample qty of raw material's quality inspection during mrp.

hi expert.
i have to consider sample qty of raw material's quality inspection during mrp.
i am wondering how to implement it.
is this possible?
thank you~~!!

Hi Seung Hyun,
I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
If it is fixed quantity, then there are several alternatives to follow:
Include the sample quantity to your safety stock
Create another material number to distinguish the sample from the original raw material number and include it in the BOM
Regards,
Julian

Base value & excise amount during MRP MIGO & MIRO

Excise base amount & excise values are calulated & put during MRP based MIGO & similar process is again done during MIRO.Can't this duplicacy be avoided.
Hitesh Chaturvedi

Hi
You have to calculate excise base value during MIGO as well as MIRO because both these activities are done by different departments.
Some times the value calculated during MIGO is wrong and is corrected by excise dept during part2 posting in J1IEX as well.
So u cant avoid it doing twice

Subcon Quota Arrangement behavior during MRP

Dear Gurus,
Currently, we have a scenario wherein during subcon process there can be 3 Vendors active. During MRP, we would like to have an output as per below:
Requirement: 1500
Vendor A: capacity 500 - priority 1
Vendor B: capacity 700 - priority 2
Vencor C: capacity 500 - priority 3
If I run MRP, I would like system to have PR's Vendor A with 500 then as the Vendors capacity is only 500 the remaining requirement should be passed on the succeding vendors. So from my example, Vendor B should have 700 and Vendor C should have 300.
Is this possible using Quota Arrangement. I was trying to test but I cannot get my desired result.
Please note that the settings in the material master is already set to Quota usage 4 and the lotsize is weekly with splitting quota activated.
Thanks,
Raymond
Edited by: Raymond on Oct 10, 2011 11:17 AM

Hi,
Yes I have maintained below in MEQ1 just for testing but I cannot get the desired result:
                  Quota Percentage        Maximum Lot size      Priority
Vendor A:   100                                 500                           1
Vendor B:    100                                 700                          2
Vendor C:                                           500                          3
Set-up Weekly lotsize with splitting quota and quota usage 4.
But during MRP execution, I think the system splits the requirement quantity into 2 and distribute to Vendor A and Vendor B then if it reached maximum lotsize it proposed to vendor C.
our requirement is first to consider Vendor A then Vendor B then Vendor C according to maximum lot size and priority.
Any idea if this is possible?
Thanks,
Raymond

Alternative items during MRP run

Hi,
I have seen discussion on alternative items in BOM. Thanks for all for sharing your knowledge. I knew alternative items will be choosen while creating / release of production order (material availability check)
Requirement:
For material A, I am using component B as priority 1 and component C as priority 2.
During MRP run, system needs to CHECK component B first. If stock is not available for component B then system need to consider component C automatically. It should not create any planned order for component B.
Is it possible, system will check automatically alternate items during MRP run? if so kindly let me know the logic.
If not, is there is any user exit. Customer is asking this facility. Its his basic requirement.
Kindly give your suggestions....
Regards / US

Hi.
I might have typed it wrong, I think the right one is called DIMP.
As far as I know you don't have to purchase it. In the past those extensions were known as Industry Solutions, in this case Automotive and A&D.
Before you go to this complexity for interchangeable materials functionality in MRP, I recommend that you have a design review with your customer, to strengthen the point that if two materials are the same for all usage purposes, but only differ, let's say, in the source (different manufacturer). for that in SAP we would define ONLY ONE material number, with additional manufacturer part number info, and in some cases with a classified batch.
Regards,
Mario

Storage location consideration during MRP Run

Hi All,
Within a company code, i am having 2 plants namely PS12 & PS13. In plant PS12, i am three storage locations namely 1201, 1202,1203. Similarly in plant PS13, i am having stores 1301,1302,1303.
During MRP run, i do not want to consider the stock in all the storage locations of PS12. The storage location 1203 to be exclued during MRP run. How to set this?
Your input will be appreciated very much,
Thanks
Kumar

Hi Kumar,
Goto SPRO>Production>Planning>Define Storage Location MRP per plant, add the storage location to be ignored during MRP and select indicator '1' against it. Thereafter, all the materials created with this storage location will be defaulted with value '1' in the field 'SLoc MRP indicator'. However this can be modified later if required.
For existing materials, select indicator '1' in the field 'SLoc MRP indicator' avaialble in MRP view under the column 'Storage location MRP'. Go for a mass update for a huge list of materials.
Check this and revert for any clarifications.
Regards,
Murali

Intercompant STO working during MRP run.

Dear Experts,
How intercompany stock transfer works during MRP run?
I mean if one company is purchaser and other is vendor and purchaser company's planned delivery time is 10 days and replenishment time in other company is 3 day then will system consider these two times in creating purchase requisition in first plant ( in MD04)?
Regards
Deepak Sharma
9818263889

Hi,
Say your purchaser is plant A, vendor is plant B. STO can make by spl.procurement key 40 in MRP2 view in plant A.
If you create requirement in plant A, system will create planed order for that material.In plant A, system will consider only planned delivery time of 10 days.
In plant B, system will create dep requirement. suppose if stock is not available that time system will consider to replinishment the material as 3 days.
This 3 days will not consider in Plant A.
Regards,
Dharma

Cheracteristic consideration during MRP run

Dear frnds,
during implementation for one steel industry i have stuck up in problem which is
they have crm plant in which finished products are endless depending upon thickness like .023,.325
if we make material master for every thickness then it will infinite number of material master.
so we thinking for single material master group of thickness i.e for single mmr for range of thickness and during sales order creation person will mention actual thickness in text of sales order or we can make it configurable and characteristic for actual thickness so during he will mention actual thickness in characteristic value.
but problem is that during mrp run, characteristic value is not taking into consideration,
so i want some customization so that characteristic value is considered during mrp run
please help me out its very urgent
thanks

Hello,
are you talking about a pure ERP implementation? A good description on modelling this with APO can be found in the Best Practice for Primary Steel (see link on BPX Mining and Metal).
Usually we work with configurable material variants, as a starting point.
Best regards,
Stefan

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

Planned Order deletion during MRP

Hi all,
We want to delete the planned orders during MRP, but before saving is done.
So, we are trying to use the BAdI MD_PLDORD_CHANGE and method CHANGE_BEFORE_SAVE_MRP .
After finding out the process order, we were trying to set the importing parameter IM_VSTAT to "L", which can be used to delete the planned order..
But since it is an importing parameter, we cannot change the value of the parameter.
Is there any alternate ways of deleting the orders before MRP is done ?
Regards,
SP.

Not sure I understand the situation correctly...You want to delete the planned orders before MRP runs again. WHy do you want to do that ? Are these firmed Planned orders ?

Approver skipped during approval process in N-step BADI workflow

Hi,
I am some problem in n-step BADI approval process. For some reasons one of the approvers is skipping during approval. And later in the approval preview it observes that the approver, who is just above the skipped approver, is appeared twice.
I am not able to simulate this issue though this is happening in the system frequesntly though it is not for all.
Can you please let me know what is the problem in the system and how can we rectify this issue?
Thank You.
Regards,
Krish

Hello
sorry search for the n-step WS14500015 is the item based...
Another thing, you can try with testing to restrict the case to special conditions. Are there any added-approver there? Is there any approver who makes some changes to the SC? etc..
Daniel

Numbers of PR skipping during MRP

Similar Messages

Maybe you are looking for