Numbers Update problem

How do I get Numbers 2.3 to update to the new Version 3 when the App Store keeps telling me incorrectly that Version 3 is already installed?

Robert,
Run Software Update to get Version 3.0, don't try to download it directly from the Mac App Store. There is also the chance that you actually do have version 3.0 already and don't know it, but this is unlikely since Apple has built-in devices to make it your default version.
Use Spotlight to search for Numbers. On my system, Numbers 3.0 is identified as Numbers - Applications, and Numbers 2.3 is identified as Numbers - iWork.
Jerry

Similar Messages

HT1338 OS X Numbers Update Problem...

OS X Version 10.9.1 on 27" late 2009 iMac.
App store Updates, shows 'Numbers' updated to v3.0.1 , but version 2.3 was not removed.
What would be the problem, and how do I remove version 2.3 'Numbers' ...?

Yes, it's possible it could be the RAM. To test that theory out, pull 1 stick out. This will leave you with 2GB RAM. Try to install Lion as you were. If you still get the panic, then swap RAM sticks. Try again. If you are still getting panics, then it is likely something else, unless both of your RAM sticks are bad, which is unlikely but possible i suppose.

Numbers Update/Problem Opening Old Spreadsheets

I am currently running Numbers 09, Version 2.3 (554) and when I attempt to open an "old" (older then the last update) spreadsheet, I receive a notice; "You need a newer version of numbers to open this spreadsheet. You can download the latest version of Numbers from the mac store"
Mac store is telling me that all of my updates are current?

Hi everybody, I have the same error message, and I try the 2 Number version I have with this result :
Number 3.2.2 from /applications "You need to upgrade OS X and Numbers to open this spreadsheet" but I have both the last version installed !
Number 2.3 from /applications/Iwork'09 "A newer version of numbers existe on the Apple store" and the program quit while I clic "OK" whithout open the spreadsheet.
Any one have the same ?
any one have a solution ?
Thanks for any help.
Regards.

Frame Crashes on Save Book After Performing Document Numbering Update

Frame 10 crashes every time when saving book after performing a Format\Document\Numbering update. All of sudden when performing a document "Update" Frame starting generating errors for specific documents in the book. Numbering in docuement does not match numbering for book. So I select those documents generating the error and then do a Format\Document\Numbering and just hit the set button. Then try to save the book and it crashes every time. It crashes for Format\Document\Numbering one document or all of them.

In Frame 7.1/Unix, it is commonly the case that an unrelated crash corrupts the Book's settings for Numbering, although it appears that nothing has changed. It is, of course, a nuisance to reset all the dialogs.
So what I do instead, and which you might try, is to set all of the book number dialogs (all six panes, for each component file) to "Read from File". That seems to be stable and survives crashes. It may or may not fix your problem.

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Why won't Numbers update free, when my other iWork apps have update for free?

why won't Numbers update free, when my other iWork apps have update for free?

I'm not sure if this answers your question. I will update them in iTunes. Then I will connect my phone and in the phone controls I can click the "Update" button and it will change to "Will Update" but doesn't.
That's part of the problem. Once upon a time, iTunes would just automatically update apps from the computer to the phone and now it apparently requires prompting that doesn't work.

Numbers update won't install

Recent numbers update did not install
The version which was supposed to install is 3.5.2 and on the app store it indicates a successful install but when I open numbers and check the version it is version 3.2 - how can I fix this

Thanks Ian but had tried that. The only way to solve the problem was to copy Numbers (and Pages - same issue) from my MB Pro which had successful updates, to my iMac which had incomplete updates. Worked great but am still concerned why it wouldn't complete update in the first place, even though App store acknowledged successful completion - Gordon

I ran the update for the newest version of Numbers. Now I cannot open some of my spreadsheets. When I try I get a drop down box that says I need a newer version of Numbers!!!! I have just installed the newest Numbers update. Any suggestions?

I ran the latest Numbers update and now I cannot open several of the Numbers files I created and saved previously. When I try, a box appears that says I need to update to a newer version of Numbers. I ALREADY updated to the newest version!!!! Any suggestions?

Welcome to Apple Support Communities
When you upgraded Numbers to the most recent version, the Mac App Store kept the old version in case you need it in the future. Your problem is that you are opening the old version by mistake instead of the new one.
To fix this, open a Finder window, select Applications in the sidebar and drag the new Numbers version (the one with the new icon) to the Dock. By doing this, you can access to the new Numbers version easily, so you will not open the old version by mistake anymore. Also, I recommend you to open the documents after opening Numbers. The same applies for all other iWork applications.
If you want, you can remove the old Numbers version, but some users have complained about the lack of features of the new Numbers version. Apple will add more features in the future. See > http://support.apple.com/kb/HT6049?viewlocale=en_US&locale=en_US

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

10.5.7 update problems

After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

Cache update problem in Integration Directory

Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack Nuson

HI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh

Numbers documents will not open it says "will not open during numbers update"

My numbers documents will not open. I keep getting a message telling me my documents will not open while numbers is updating. I have the latest numbers update already downloaded.

open the application "Launchpad":
then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove. Now click anywhere on the desktop to exit this remove/adjust mode.
Open the App Store (menu item " > App Store…")
now locate and install numbers

Twitter Update Problem

Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous. The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.

my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer.

Numbers Update Issue

Numbers update 3.5 has not yet been updated with the iPad version which is still 2.5. When will this issue be resolved? It is causing issues with syncing my iPad with iCloud Drive

Hi,
We are all users like yourself. Maybe Apple knows.
quinn

Numbers Update problem

Similar Messages

Maybe you are looking for