Numerous problems, please help

Ok, I just recieved my 4gb nano and I put the CD in and follow the instructions to the letter, it says connect the ipod, and I do, and all is well, it installs iTunes and I go about putting songs into iTunes whilst letting my nano charge completely. After I'm done converting my music, I realize that ipod isn't listed on the resource list, so I disconnect it and reconnect, still nothing. I've tried the 5 r's or whatever like the hold > center/menu button thing, but it's to no avail. So I updated iTunes, and that didn't help. I uninstalled the ipod software from the computer, and reinstalled it, and here's where more problems insue. It says to connect the ipod to see if it needs formatting, when it finally recognizes it, it says it needs to be formatted so I click format, now, it says error connecting to ipod and I need to disconnect and reconnect, it may say that immediately, or may take several minutes. Mind you, it didn't do this when I initially installed the ipod and software. Another problem, I recently installed a USB 2.0 card, it works without a problem, I've used several other devices on it. But, one of the slots is the one it says error with immediately, the other one is the one it takes it's time with. Lastly, I've downloaded the new ipod software and tried to run it, but it keeps saying that ipod service isn't detected, or it can't connect to it or something along those lines.
I'm running Windows XP Pro, please help.
Windows XP Pro

Well, I've now gotten back to the point where it's the iTunes problem again, my pc recognizes that my ipod is plugged in, but iTunes doesn't. And I tried updating the software, but it says that the ipod isn't supported.
I guess this makes me more certain that I'm going to switch to OS X and get a powerbook. I highly doubt that Macs have these problems with ipods. I guess I could get mad at Apple and say it's their fault, but my guess is it's a software issue, one relating to XP, oh well.

Similar Messages

  • My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t  solve my problem. please help!!

    my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

    Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • [TV@Master] Problem please help

    I have Msi.mother board PT8-Neo -LSR ,  Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
    the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
    please help

    i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
    please read my reply again
    my operating system is win me and i have also another pc have XP
    when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
    but it give me this 2 mesages  when i try to install the driver
    MSI TV card is not found ,stop the installation
    the other message is
    MSI pvs driver installatin failed
    i download the driver from msi page also give me the same messages
    for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
    what to do now 

  • I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

  • I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

  • My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

    my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

    Don't worry, just follow these steps to fix iPhone stuck on Apple logo
    => First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
    => Now install the iTunes application in your System and connect your Device with computer via Data cable
    => Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
    => Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
    I hope that will surely
    Thank you...

  • Hello!i have problem to insttal potoshop cs6 this is,we've encountered the following issues.installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.please,help me

    this is,we've encountered the following issues.
    installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
    please,help me!

    Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?

  • My iPad stop working suddenly i see black screen only pressing the home? and sleep button dose not solve the  problem please help?

    My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.

  • X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

    9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
    So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
    I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
    So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
    Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
    So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
    I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
    There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
    I don't know.. I need clarification and help, PLEASE.
    Thank you very much in advance!

    Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
    All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

  • Hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

    hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

    To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

    Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

Maybe you are looking for