Nv4.disp error appears and Qosmio G30-201 shuts down

hello
I own a Qosmio G30-201 and have had it for almost 2 years now.
Only a few weeks back I've been getting a error message *error nv4.disp* and my system shuts down.
I've even used the recovery cd many times and it does work for a day or 2
Can any 1 help plz?
thank you

Hi
Try firstly to update the BIOS and the graphic card driver.
If this will not help you then I would recommend contacting the ASP in your country like suggested by Akuma too.
Good luck

Similar Messages

  • Application bar won't appear and MacBook won't shut down conventionally

    When i load my Mac up it comes up with three error messages.
    They all say:
    +Application Launch Failure+
    +The application "(null)" could not be launched because of a shared library error:+
    And then the different messages have different codes:
    - "<CNQL1208ButtonManager.app><CarbonLib>CFMPrivCarbonCore>"
    - "<N12UButtonManager.app><CarbonLib><CFMPrivCarbonCore>"
    - "<N067UButtonManager.app><CarbonLib><CFMPrivCarbonCore>"
    I have a feeling i know what has caused this, i was updating the security software when an interruption with the internet cause my computer to freeze up so i performed a force quit.
    The result of this is that when i've clicked the error messages away the application bar down the bottom doesn't load and (strangely) when i try to shut the computer down it doesn't do anything. Obviously i can just hold the power button down to turn it off, but i can't imagine it's good for it. I can still access my applications by pressing "Apple-Shift-A", but as an added issue when i go into a folder it doesn't have the usual "Applications/Documents/Music/Movie etc" on the left hand side.
    Hopefully someone can help me out here.

    Just needed to reinstall the latest security software.
    Security software on a Mac in most cases creates more trouble than it cures.
    "ButtonManager.app" does not appear to be something installed by the system. If the problem returns, try disabling that application.

  • Receiving a serious error message and premiere 9 must shut down

    When i open the program i get the welcome screen then i click to open a new or existing file and i get a gray background with a error message "sorry a serious error has occurred that requires adobe premiere elements to shutdown.We will attempt to save your current project'' The program worked fine a few weeks ago now it is not.

    lightsups
    Just some questions specific to Premiere Elements 9 with Premiere Elements details.
    For now I am assuming that you are using Premiere Elements 9 on Windows 7, 8, or 8.1 64 bit.
    Please go to Edit Menu/Preferences/Scratch Disk and tell us to what hard drive location you have
    pointed the Scratch Disks and how much free space is at that location.
    Then please go to Libraries/Documents/Adobe/Premiere Elements/9.0 and tell us how many files you
    find in the Adobe Premiere Elements Previews Files Folder and the Media Cache Files Folder. Delete
    the content of of either folder if it has pile ups of files. Also go to Edit Menu/Preferences/Media and hit
    the Clean button in the Media Cache Database area there.
    Please delete the Adobe Premiere Elemens Prefs file or the 9.0 Folder in which it exists. The path to
    the Adobe Premiere Elements Prefs file in Premiere Elements 9.0/9.0.1 is
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    9.0
    and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work,
    then delete the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure the
    you are working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see
    the complete path cited.
    I am assuming that you have been and are running the program from a User Account with Administrative
    Privileges and that you have the latest version of QuickTime installed. But good to double check. In addition, even
    if you are working from a User Account with Administrative Privileges, right click the Premiere Elements 9 desktop
    icon and click on Run As Administrator.
    Let us pause here, review the above, and then decide what is next.
    Thanks.
    ATR

  • Re: How to upgrade memory on Qosmio G30-201 and where to buy memory

    Hi,
    I have a Qosmio G30-201, with the following spec:
    - Intel Centrino Duo Mobile Technology featuring Intel Core2 Duo Processor T7400- Genuine Windows XP Media Center Edition- 400 (200 + 200) GB Hard Disk Drive- 2,048 (1,024+1,024) MB DDR2 RAM (533 MHz)- 17" Toshiba TruBrite WUXGA TFT display- HD DVD-ROM drive
    Running under Vista Ultimate
    I would like to upgrade the memory to 4096.
    Do I have to buy 4096 of memory, or can I add 2048?
    What memory do i buy? Toshiba do not seem to sell MB DDR2 RAM (533 MHz) after 4 years. What other memory would be suitable?
    Many thanks,
    Best regards
    Nick

    Your notebook can handle with 4GB of RAM and I recommend you to use 2 x 2GB module.
    Compatible 2 GB module has part number PA3513U-1M2G or Kingston KTT667D2/2G.
    Put the part umber in Google and you will find a place where you can order it in your country.
    Bye

  • Qosmio G30-201 connected to LCD - how to fit the whole screen?

    Hi
    I have a Qosmio G30-201 laptop and also using a Toshiba WLT58 32 inch widescreen LCD with a HDMI Connector.
    I am trying to get the film that I am watching to fill the whole screen and leave the borders off.
    Is this possible?
    Cheers
    Steve

    Hi
    Did you check if there is an option in the DVD player software which you use to watch DVDs??? Please check it!
    Additionally you could check the NVIDIA graphic card properties -> advanced settings.
    There you will find tab called GeForce Go.
    Thee you should open the table at the left side which provides useful options.
    Go to the device settings -> device adjustment.

  • When im trying to download a free App an error appears and sais that my previously purchase was declined.how is related a free app with a paying one?

    When im trying to download a free App an error appears and sais that my previously purchase was declined.how is related a free app with a paying one?

    Because that's the way you setup your account. Whether the app is free or not is irelevent, apparently the payment method you selected when originally setting up your account is no longer valid, hence your account is not longer valid. Either fix your selected payment method or setup a new app store account without a credit card:
    http://support.apple.com/kb/ht2534

  • TS1424 Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.

    Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.
    what can I do to resolve it?

    Hello kmb_cb_lb
    If you cannot get your rental to play, then report the issue to the iTunes Store to get it resolved or refunded.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore.

    I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore. PLEASE HELP

    I did restore my phone last week, it went well. Today, i turned my phone off and turn it back on, now it is stuck in itunes logo and i was thinking that it needs a restore again. Once i tried restoring it, it finishes the "Extracting iPhone Software" part, but after that the error appears. PLEASE HELP ME

  • When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

    When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
    Problem Event Name:             APPCRASH
    Application Name:                  iTunes.exe
    Application Version:               10.4.0.80
    Application Timestamp:          4e262cfr
    Fault Module Name:               QuickTime.qts
    Fault Module Version:             7.70.80.34
    Exception Code:                     c0000005
    Exception Offset:                    00146b30
    OS Version                                                            1033
    Locale ID:
    Additional Information 1:          0a9e
    Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
    Additional Information 3:          0a9e
    Additional Information4:          0a9e372d3b4ad19135b953a78882e789
    Any assistance I can get will be greatly appreciated.

    Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!

    My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!

    1. The most efficient way to charge an iPad is with the charger that came with the iPad and having that plugged into a wall outlet. Trying to charge while connected to a laptop often doesn't work because the USB port may not provide enough power.
    2. Once an iPad battery has completely drained it may take an hour or more on the wall charger before the iPad responds. So after an hour on the charger reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    3. If the iPad still does not start up make an appt at the Apple store. It will be far better if you have an appointment rather than just walking in because those with appointments will be taken care of before you are.

  • Error ORA-01033 oracle intialization or shut down in progress

    Hi ,
    I am getting the error when i try to login to oracle
    Error ORA-01033 oracle intialization or shut down in progress.
    i waited for much time but i get the same error.can some one help.
    Thanks

    442321, if a startup is in process you will need to either let it complete or cancel it in order to connect with a non sysdba session.
    You cancel the startup the same way you would kill a hung shutdown by connecting as sysdba and then issueing a shutdown abort.
    You should review the alert log prior to issuing an abort to see what is going on.
    HTH -- Mark D Powell --

  • Error message caused by an improper shut down

    Hi
    When I try and lunch the web services from server admin I get this message in the log.
    Address already in use: make_sock: could not bind to address 192.168.1.15 port 80
    Is this error message caused by an improper shut down, the apache processes are still hanging around and apachectl restart won't work.
    How can I clear them
    Thanks
    Message was edited by: stevewaters

    That message could be caused by many things - either a pre-existing copy of Apache, or some other process altogether.
    Did you install/enable Apache 2 on your server? If so, that could be the problem since Server Admin only knows how to manage Apache 1.3, so can't restart Apache 2.0.
    You can use the command-line tool lsof to find which process is listening to port 80. You'll then need to make the call as to how to fix it - either by shutting down the process, killing it, or changing the port that your Server Admin configuration listens to:
    <pre class=command>sudo lsof -i :80</pre>

  • I cannot close the icloud backup message and I cannot even shut down the iPad to use any of the apps

    I cannot close the icloud backup message and I cannot even shut down the iPad to use any of the apps. Any tips or help would be appreciated

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Certificate for the website, was going to copy and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down. Why what happened i am not sure about going to the website now....

    Question
    Went to Crossings Book Club website while there something popped up about the certificate for the website, i was going to copy it and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down.

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Maybe you are looking for