NW04s: How to change column settings like 'do not adjust' 'fit to resuts' e

In the new Analyzer, old report format: how to change column settings: do not adjust, fit to results, etc.?
Regards
-Bala

Hello,
In the properties dialog of the Grid and some other items, there is a checkbox by name "Autofit". When this is checked, the result columns are expanded to correct data widths.
Regards,
Manjunath

Similar Messages

  • How to Change Security Settings on an Existing Wireless Network

    I'd like to change existing network security settings to WPA2, AES or at least to from TKIP to AES.
    I'm familiar with browser access to the router and with how to change the settings on the router.
    My question is how to do this as painlessly as possible for the network.  Step by step would be nice
    I guess first I have to change the router settings using the computer running Easy Link Advisor?
    Do I then have to disconnect/reconnect that computer?
    Do I have to disconnect every other computer and then connect each one again with the updated settings?
    Will the change in security settings affect my print server?  If so, do I have to set it up from scratch in ELA?
    For the record, I have a WRT-300N and the print server is a 54g.
    Anyone who reads this may also want to look into recent news.  May not be a big deal, but a vulnerability of WPA/TKIP has been identified.
    Thanks in advance to anyone who answers.
    Solved!
    Go to Solution.

    Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my  network and none were available. Does that matter?
    The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
    So now I have an unsecured network. Am I vulnerable to attack?
    Which leads me to my real question How do I change the security settings?
    Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
    Thanks,for any help
    Phil

  • How to change screen settings

    Hi
    I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
    I m using the version 4.5b.
    Thanks & Regards
    Ravindra

    Hi,
      refer u may get an idea.
    https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
    Regards

  • How to change column "Date" from "Text" to "Date-Time" in Document Library.

    How to change column name "Date" from "Single line of Text" to "Date and Time" in Document Library.

    Hi,
    If you would change column type, you might need to re-create column.
    If you would like a text column to display in date format, you could refer to the links below:
    http://sharepoint.stackexchange.com/questions/45774/how-to-convert-date-field-in-single-line-of-text-using-calculated-columns
    http://yasuanantha.blogspot.com/2008/06/to-convert-text-column-to-date-column.html
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How to change Preset settings (CS4)

    Hello everyone,
    I'm going to make a video with Adobe Premiere CS4 and I need to know how to change Preset settings or however it is called, because I think none of the Presets match with my videos (tried some and my videos were bigger or smaller).
    My videos are .mov, 800x600, made and rendered in Autodesk 3ds Studio Max 2010 (3D Program).
    Could someone please help me? I don't know if there's a preset for me or if I have to change settings or something like that (and where). Yes, I'm new! I'm from Spain if you need it.
    Feel free to ask anything you need, of course.
    Thanks in advance,
    Marta

    Marta,
    Welcome to the forum.
    In CS4 and CS5, one can set the Preset at the Sequence level. Before, it was more global, at the Project level.
    In Sequence New, you will choose the Desktop Preset, and then you can alter almost every displayed attribute, such as Frame Size, or Frame Rate, etc. you want to match your Sequence to your source footage 100%. After editing with those attributes matching, you can then Export to a desired output setting with AME (Adobe Media Encoder). You choice of Desktop, allows you to customize the settings to match. I wish that Adobe had named it "Custom," as the term "Desktop" is a bit abstract, though it has been around for a very long time.
    Good luck, and do match your Sequence settings (Desktop) to your source footage.
    Hunt

  • Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

    my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

    To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
    http://support.apple.com/kb/HT1766

  • How to change the Settings in the Graphic structure. T Code CN41

    Hi,
    How to change the Settings in the Graphic structure. T Code CN41
    Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
    Pls advise me.
    Thanks in Advance.
    Raju

    Hi,
    Thanks for the reply. But please clarify a bit. Please below is my requirement.
    As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
    Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days.  I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
    Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
    Regards
    Raju

  • HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

  • How can I change the settings in iPhoto not to import duplicates?

    I accidently change the settings from do not duplicate to import duplicates and checked the box for "do not ask again". now i can't change it back. please help

    Apple routers do not support UPnP.  They do support NAT-PMP, but that requires that you manually enter in the port values to set up what is known as Port Mapping.
    But, first things first. is the Time Capsule set up as the DHCP and NAT router for the network, or do you have another router upstream from the Time Capsule on the network?
    Another way to ask the same question......what is the make and model number of the device that you call your "modem"?

  • Trying to figure out how to change the tuning of certain notes so I can play notes in between pitches for example the middle note between B

    Trying to figure out how to change the tuning of certain notes so I can play notes in between pitches for example the middle note between B & C or E & F. I can use different tracks if needed but I would prefer to know how to do it for individual notes as well. They have to be exactly in the middle so it's not out of tune.

    Danny,
    The theme to Doctor Who is in 12/8. In music theory, there's no such thing as a 12th note, the notation and nomenclature is all based on things being divisible by four. So for the diddly-dum feel to happen, you have to give the beat to a quarter note plus another eighth note -- we call it a dotted quarter note, and now you have three eighth notes per beat so you can go diddly. So, since you can't call the time signature 12/dotted quarter, you call it 12/8 and go faster. Make sense? Anyway, for GB's purposes, all you need to know is that you'll get that feel by choosing 12/8.

  • When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

    When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
    My history is only displaying one day even though I have never changed my settings even after I updated it last year.
    Need to know how to restore these settings.
    ***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

    Are you using cleanup software like CCleaner?
    If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
    * http://kb.mozillazine.org/Session_Restore
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • How to change colour settings on Satellite Pro P300

    I just got my new laptop and can't for the life of me find how to change the colour settings in the monitor.
    On my old desktop there was a button on the monitor.
    Being a first time laptop user im going nuts trying to find how to change my monitor settings...
    If anyone can help id be so grateful

    Please dont mix the notebooks internal monitor with the external desktop PC monitor.
    You will not find any control unit like on the external monitor which would help you to change the color.
    I dont know what graphic chip your notebook uses but my notebook supports Intel graphic card and the preinstalled Intel graphic media accelerator (in control panel) provides some settings for color correction;
    The settings are; color, gamma, brightness and contrast
    There you can set the values between 0 and 100
    Maybe this is what you are looking for

  • How to change sequence settings without CC 7.1 update?

    Well, i was hoping that Adobe will release 7.1 update on October 15th, as promised on some websites. I don't recall, maybe it was Creative COW or any other.
    That's why i have created 720p PRORES proxies for 9x multi-camera live performance shoot which lasts for 2 hours for lag free, fast editing.
    I have sucessfully edited it and promised my clients that on October 16th they will get the whole show in 1080p, high quality.
    So, there is no update yet, and yes, i can relink files to original 1080p, but the multicam sequence is capped to 720p and i simply can't find a way to change it's size.
    The old fashion copy/paste way from one sequence to another does not work, since 720p sequence is linked to multicam edits. In CS6 i could edit ".prproj" file in text editor to change any properties (including sequence properties), but right now in CC, .prproj file contains binary data only, so i can't do it that way either.
    Maybe someone knows any other way to change sequence settings right now, or what is the exact day for 7.1 release?
    Thank you!

    Hi Paolon!
    You need to extract your .prproj using WinRAR to a text .prproj file, then use some text editor such as Notepad to search and replace sequence dimensions
    For example find "1920" and replace it to "1280" if it looks like Īt belongs to a sequence definition.
    I don't recall how it was called, maybe "VideoFrameRect" or something similar.
    First create some very simple project to experiment with, and always make a backup copy in case something goes wrong

  • How to change column heading in line item report

    Hello Experts,
    How to change the column heading in the line item report CJI4 or CJI3  ?
    for eg: The field WBS will show as Object in the heading. Here  I would like to change to WBS.
    Is there a way to do this without changing ABAP code
    FATMAN

    Not possible through standard I guess.
    Enhancement you should be looking is COOMEP01 which includes the component EXIT_SAPLKAEP_009
    i.e., Line Item Reports: Customer-specific Formatting of the Lists.You use this enhancement to modify column headings.
    Regards
    Sreenivas

  • How to Change Finder Settings in All Windows?

    Hi All,
    Similar to the original post found here:  Re: How to Change View Options for ALL Finder Windows?
    I'm trying to change my finder settings across all finder windows... I tried the solution posted in the above thread but get this message in terminal.  I'm not all that computer savvy when it comes to terminal so not sure what it means... Perhaps someone knows of a different and/or better solution?
    Any help would be much appreciated, thanks and take care!
    Dave

    Yup got it back after waiting, followed the remaining directions, but didn't work for me... not sure why?  Upon rebooting folders do not change after I readjust settings and click 'use as default'.... strange... I even tried that other line of code another person posted later on in the previous thread. 

Maybe you are looking for

  • COMUNICAÇÂ​O COM DATA DASHBOARD

    Bom dia! Meu nome é Antonio Alberto, fiz aquisição de uma licença NI MYDAQ FOR STUDENT, para o qual estou terminando minha manografia referente a um sistema supervisório, onde envolve labVIEW e o aplicativo DATA DASHBOARD no iPAD (APPLE), ocorre que,

  • Animated gif will not stop when placed in director

    I have an animated gif I am trying to place into a director file. When its placed and I press play it will play the animated gif over and over. I also took the gif and saved it as a swf file placed it in director it does the same thing. Please tell m

  • Windows 8 is showing that my HP photosmart 6520 is offline

    I have a new HP Windows 8 and a new HP Photosmart 6520 printer. Whenever I go to print - I get an offline error message This question was solved. View Solution.

  • Why is the side of my MacBook cracked open?...

    I just realized....that the side of my MacBook has two cracks, the upper one is smaller and lower one is so big, I can see the inside.... is this normal? I've only had this for 2 years...should I glue it back or something? Thanks!

  • Grace Period for document process

    A document is submitted for approval.  There is a defined length of time (grace period) that any approval can stay without being approved.  If the document exceeds the grace period a reminder email is sent to the approver(s).  If it exceeds the defin