NW2004 Sneak Preview installation
I am trying to install NW2004-SP16-Sneak-Preview on a 2 GB laptop with {Windows XP-MediaCenter Edition-Version 2002-SP2).
The installation finished successfully.The database and java instances have started successfully.
When we try to login like http://localhost:50000/irj, I get an error " 503 service unavailable
application stopped "
Details: You have requested an application that is currently stopped".
Does anyone has a solution to this issue?. is it any thing do to with the Media Center Edition?.
Any help is greatly appreciated.
Regards
Selvam
Hi Selvam,
Is the J2EE home page i.e http://localhost:50000 opening?
If yes, then probably the irj application might not be
running. Go to Visual Administrator usr/sap/.../j2ee/admin
go.bat -> server -> services -> deploy -> applications
and start the sap.com/irj application.
Regards
Srikishan
Similar Messages
-
NW2004s Sneak Preview Java install never starts up
I've installed NW2004s Sneak Preview Java on Windows XP Media Centre Edition with 2Gb RAM and 8Gb swapfile but the server never finished starting up properly.
I've tried with JSDK 1.4.2_09, _11, _12 and with the recommended Sun JDK parameters but always the same problem.
The MMC reports the server has started up completely, with all green icons, but when I open a browser and point at http://localhost:50100/irj or anything else I get a 503 Service Unavailable or 503 The Application Is Currently Stopped errors.
The CPU usage of the J2E service processes keep chugging away at about 70% CPU utilisation, and I left it going for 24hrs but it never finishes.
There dont seem to be any errors in the logs that indicate why it doesnt finish starting up.
Has anyone managed to do an install on XP Media Centre Edition, or any version of XP?
Any suggestions?
SteveRich,
Thanks for the reply. I still get the same problem. MMC reports SDM, Server0 and Dispatcher all running, and http://localhost:50100/index.html gives:
503 Service Unavailable SAP J2EE Engine/7.00
Cannot process a request for dynamic resources.
Details: Web Container service is currently unavailable.
fter another 10 mins or so the error message is:
503 Service Unavailable SAP J2EE Engine/7.00
Application stopped.
Details: You have requested an application that is currently stopped
There are now a few hundred error messages in defaulttrace, which indicate 70 services failed, although it doesnt explain why. This is the first error in defaultTrace while starting:
Date : 07/04/2006
Time : 14:19:59:781
Message : Tue Jul 04 14:19:59 BST 2006 Thread[Thread-1] initiated a full thread dump due to: Timed out services:
Service com.sap.portal.prt.sapj2ee > hard reference to service adminadapter.
Service naming > hard reference to interface log.
Service connector > hard reference to service naming.
Service com.adobe~DataManagerService > hard reference to service iiop.
Service com.adobe~TrustManagerService > hard reference to service iiop.
Service ejb > hard reference to service connector.
Service cafumrelgroups~imp > hard reference to service naming.
Service webservices > hard reference to interface naming.
Service developmentserver > hard reference to interface naming.
Service ssl > hard reference to service keystore.
Service prtbridge > hard reference to service jmx.
Service com.adobe~PDFManipulation > hard reference to service iiop.
Service adminadapter > hard reference to service jmx.
Service tcsecsecurestorage~service > hard reference to service naming.
Service cafeuer~service > hard reference to service applocking.
Service jmsconnector > hard reference to service naming.
Service pmi > hard reference to service tcsecdestinations~service.
Service com.sap.portal.pcd.gl > hard reference to service jmx.
Service MigrationService > hard reference to interface container.
Service security > hard reference to service com.sap.security.core.ume.service.
Service licensing > hard reference to service ts.
Service jms_provider > hard reference to service security.
Service sld > hard reference to service locking.
Service jmx > hard reference to interface security.
Service DQE > hard reference to service jms_provider.
Service rfcengine > hard reference to service ejb.
Service tceujwfuiwizsvc > hard reference to service cafeugp~model.
Service tcsecsaml~service > hard reference to service adminadapter.
Service com.adobe~LicenseService > hard reference to service naming.
Service com.adobe~DocumentServicesConfiguration > hard reference to service naming.
Service telnet > hard reference to service shell.
Service deploy > service deploy start method invoked.
Service locking > hard reference to interface log.
Service cafeuodimnuacc > service cafeuodimnuacc start method invoked.
Service failover > hard reference to interface naming.
Service com.adobe~DocumentServicesDestProtoService > hard reference to service naming.
Service webdynpro > hard reference to interface naming.
Service cafeugpmodel > hard reference to service tcsecsecurestorageservice.
Service cafummetadata~imp > hard reference to service applocking.
Service cafeugpmailcf > hard reference to service naming.
Service tcsecvsiservice > hard reference to service tcsecdestinationsservice.
Service tceCATTPingservice > hard reference to interface naming.
Service ts > hard reference to service naming.
Service tcsecdestinationsservice > hard reference to service tcsecsecurestorageservice.
Service dsr > hard reference to service security.
Service keystore > hard reference to service security.
Service applocking > hard reference to service ts.
Service monitor > hard reference to service jmx.
Service com.sap.security.core.ume.service > hard reference to service dbpool.
Service http > hard reference to interface log.
Service cafruntimeconnectivityimpl > service cafruntimeconnectivityimpl start method invoked.
Service CUL > hard reference to service jmx.
Service tc.monitoring.logviewer > hard reference to service jmx.
Service tc.CBS.Service > hard reference to service dbpool.
Service apptracing > hard reference to service deploy.
Service com.adobe~XMLFormService > hard reference to service naming.
Service shell > hard reference to interface security.
Service tcsecwssecservice > hard reference to service tcsecsecurestorageservice.
Service servlet_jsp > hard reference to service naming.
Service com.adobe~FontManagerService > hard reference to service iiop.
Service iiop > hard reference to service ts.
Service bimmrdeployer > hard reference to interface container.
Service classload > hard reference to service security.
Service com.adobe~DocumentServicesLicenseSupportService > hard reference to service naming.
Service log_configurator > service log_configurator start method invoked.
Service com.adobe~DocumentServicesBinaries2 > hard reference to service naming.
Service configuration > hard reference to interface log.
Service basicadmin > hard reference to service jmx.
Service dbpool > hard reference to service connector.
Service appclient > hard reference to service naming.
Severity : Error
Category : /System
Location : com.sap.engine.frame.Environment
Application :
Thread : Thread[Thread-1,5,main]
Datasource : 1152021720729:D:\usr\sap\J2E\JC01\j2ee\cluster\server0\log\defaultTrace.0.trc
Message ID : 02004C4F4F5000000000001600000E38000417C15F2CAABB
Source Name : com.sap.engine.frame.Environment
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction :
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : /System
Resource Bundlename :
Session :
Source : com.sap.engine.frame.Environment
ThreadObject : Thread[Thread-1,5,main]
Transaction :
User :
Steve -
ADS for SAP NW2004s Sneak Preview ABAP..
Hello folks,
Do we need ADS (Adobe Document Services) on SAP NW2004s Sneak Preview ABAP to run Interactive Adobe forms?
Regards,
Sarath.I figured out we need ADS for SAP NW2004s Sneak Preview ABAP. Moreover we need a Java engine also.
-
Problem with Integrated Planning / NW2004s Sneak Preview
Has anyone successfully started the planning modeler of the integrated planning in NW2004s?
I installed the ABAP Edition of NW2004s Sneak Preview (NSP) and after that the Slim Java Edition (J2E). When starting the planning modeler I get the error message "Cannot find J2EE Engine" although the J2E-System is running according to the management console.
I suggest that you need to modify some of the parameters of the ICM. Has anyone some infos how to do that?
Thanks for your replies
ThorstenHi Thor,
as raja mentioned you need NW04s Java engine to integrate with NW04s ABAP sneak preview.Right now it is not available for download in SDN and service market place. it is still under ramp up and only available to SAP internal.
Thanks
Sarath. -
NW2004s sneak preview ABAP - BI
Hi all,
I have installed NW2004s sneak preview ABAP succesfulLY in my laptop. Now i created a cube, data source and ransforamtions in client 001 and tried to load data from a flat file. I m getting an ABAP run time error when i execute a DTP or info package to load the data.
How can i solve this problem.
Has any one come across this situation.
Regards
PraveenCheck out the note 946481. This should resolve your issue.
Please update the output
Regards
Pankaj -
WAS Sneak Preview Installation problem???
Hi,
I was successful in installing the WAS sneak preview installation from sdn.but since I had problems in using sdm password for deploying webdynpro I uninstalled the entire setup of sneak preview.
Again when I tried to install sneal preview,it is stopping at 17th phase of 28 for a long time.The phase is "Load Java Database content".Neither it is giving any error in log file nor moving forward to next step for more than 2 -3 hours.
Has anybody encountered this problem earlier?
Useful answers will be suitably rewarded.
Regards,
RKHi,
it could very well be that your LOG volume is filled 100%. Please check your (<drive>:\sapdb\data\wrk\<SID>\)knldiag and/or knldiag.err file for LOGFULL messages.
In order to free up log, you need to make a Log backup. Prior to your first Log backup, you need to have made a Data backup.
So, if you haven't done any of the above previously, you would need to:
1. define backupmedia for both Log and Data backups
2. perform a data backup using the data backupmedium created in step 1
3. perform a log backup using the log backupmedium created in step 1
Afterwards, you could also create an Autolog backupmedium and switch on the Autologging feature, it would save the log automatically from filling to that degree.
All done conveniently using the Database Manager GUI.
Regards,
Roland -
Netweaver7.0 Sneak preview installation
Hi All,
I am trying to install Netweaver7.0 sneak preview at my local PC. I have met all required configuration for installation. I am getting an error at step 3 , while setting OS User Passwords.
1)I have manually created two users
SAPServiceJ2E
SAP System > OS User Passwords
Default is abcd1234, ie. the master password. If the password does not match you Windows password policy (eg., 10 letters, at least on digit), installation will fail.Hi, I can't find the forum we are supposed to use for sneak preview installation support. I'm new here, so maybe it's obvious and I'm just missing it.... Could you help us out and provide a link?
Thanks!
On edit: Okay never mind, found the link on the download page...for anyone else who is looking, here it is:
Software Downloads
Message was edited by: Margaret Hilsbos -
SAP sneak preview installation error reg MaxDB
Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rteHi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas -
Sneak preview Installation error, file source.properties not found
Hi all,
I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and jce_policy-1_4_2.zip as specified. The Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
Thanks & Regards,
Sai Krishna. KHi Konchada,
Pls tell how you solved this problem...
I am in need of it... Thanks
Regards/ Guru -
I'm trying to install "SAP NetWeaver Enterprise Portal on MaxDB - Developer Edition Sneak Preview" In the final stages of Portal Installation, it is trying to "Start SAP J2EE Engine", But it keeps messages like
INFO 2005-03-21 17:20:15
J2EE Engine JC00 of SAP system J2E did not come up after 950 seconds: waiting for another 20 seconds.
Could anyone please help?
Thanks!Hi,
this should resolve to a problem in the startup framework of the J2EE Engine. So you could check the troubleshooting tips listed in the documentation in order to locate the exact problem: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a2/bb0a412a06f023e10000000a155106/frameset.htm">The J2EE Engine Does Not Come Up After 800 Seconds</a>.
Hope that helps! -
ABAP sneak preview installation
Hello,
I have installed EP6 SP11 java on my system. I would like to install ABAP sneak preview without removing EP6 SP11. Will there be any problem? If so is there any other way to do it without uninstalling EP6 SP11?Hi,
First of all whay do you want ot install ABAP system on a JAVA system?
You can install ABAP system,then do a JAVA system installation,but the other way round is not possible.
I hope it helps.
Point please,if my answered helped.
Rgs
vikas -
NetWeaver Sneak Preview Installation
<b>Hi Eveybody:
I am trying to learn SAP Netweaver Enterprise Portals.
I just downloaded the three NetWeaver Sneak Preview files NWpart1 NWpart2 NWpart3
I want to install NetWeaver.If anybody knows, how to install it, Please let me know.
I really appreciate your help.
(and point too.)
Thanks in advance.
Ashok Kumar</b>Hello ASHOK,
Unzip those three files under a directory of your choice. Then under your directory/smoke execute the start.htm page and there check the hardware and software requirements. If everything is ok, launch the installation process (there's a link for that purpose on the start.htm page).
Regards,
villalain -
Netweaver Sneak Preview Installation hangs at phase 18 of 29
Downloaded Sneak Preview SAP Netweaver 04 Java edition file 1:NW04SneakPrevJavaSP11.part1.rar and file 2: NW04SneakPrevJavaSP11.part2.rar. Extracted into a directory and started installation using SAPInst.cmd.
Installation went thru fine till phase 17 and in phase 18 it is taking for ever to complete. Also in the status bar it shows EP_LOCK_APPLS loaded (1 rows). It has been in this phase 18 for more than 3 hours.
Any help is suggested.
thanksHi Chess,
I have also faced this problem several times very recently also.
This is mainly because of registry cleanup problems.Do as follows :-
1)goto start -> run -> type regedit.
2)Serach the entire registry for sapdb,maxdb,xserver instances and entries.
3)Delete all the nodes of the above sapdb,maxdb & xserver.
4)Only caution is if the left hand frame of the registry shows any environment values of sapdb,maxdb and xserver don't delete that particular node.
5)After all deletion double-check one more time in the registry and reboot your machine and start a afresh instaallation.During afresh installation the installation software should ask you for DB buffer cache size.If you get that you are sure that your registry is totally cleaned and fresh and definitely the installation will go through.
Hope it helps.
All the best.
Regards,
Guru Subramanian B.
P.S :- Consider rewarding points if my answers are helpful to you. -
Web AS 6.40 sneak preview installation hangs
I try to install Web AS 6.40 sneak preview on My Windows XP machine. However, the installer hangs on this step:
"MaxDB Database Internal Installation (post processing)"
I have checked sapinst.log, sapinst_dev.log and XCMDOUT.log. There is no error message regarding MaxDB in it.
Am I missing something? Is there other place that I need to check?
I am running Windows XP Professional SP1. My machine has 1 GB of RAM and it has a Pentium M 1.6 GHZ CPU.
Thanks,
Alvin MaI waited for about 15 hours, and still no activity..
Apart from RAM , I have no issues in other front and there is no log activity for 14 1/2 hours.
RAM = 512 MB
Windows Service Pack 4
Internet Explorer 6
NTFS File System - Yes
J2SE SDK 1.4.2_03
Hard disk space = 15 GB
I increased the paging size to 1024 MB
Any thoughts, before I get way frustrated....
I must also add that, I am facing all the issues as indicated in the above posts and the issues are a perfect match.
If there is any more details that I need to add here, please let me know.
Regards,
Subramanian V.
P.S. I have just restarted it and I plan to wait for some time as well
Message was edited by: Subramanian Venkateswaran -
Pls F1.. problem with NW sneak preview installation
i just downloaded nw dev stu 2.0.7 sneak preview...successfully.
now then..when i did try to install by executing SAPsetup.exe i get this msg
"This application has failed to start because sapfeiut.dll was not found,Re-installing the application may fix this problem."
let me know what do i do.....its urgent that i get started with the portal basics...pls F1 asap.
regards,
satishposte next question to the old thread.
Maybe you are looking for
-
Help connecting macbook to monitor
I am about to pick up a new 24" LCD display, but I can't decide between an HP with 2 DVI inputs, or the Dell with rave reviews. The monitor will be hooked up to my desktop G5, and to laptop when it's stationed. Will having the macbook hooked up via D
-
Suddenly I am not able to send any email from my account, from pc or phone. It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again." I ha
-
How to Purchase Asset through Purchase Order
Hi SAP Gurus, Can aby one explain me How to Purchase Asset through Purchase Order. Thanks in Advance, Warm Regards, Balaji Bhonsle
-
JSTL EL expressions in JavaScript
I'm new to JSTL. I'm using JSTL version 1.0 on Tomcat 4.1.37. I've created a servlet that generates a list of items and sets them to the attribute of the request. I'm using the following code to populate a drop down menu using this list. <%@ taglib u
-
IPhoto '08 and finder conspire to hide my photos from me!
OK, prior post iPhoto not exporting pics - I could live with it but now I find that the Finder no longer allows me to have access to my own photos on the hard disk. No matter how I try to find where my pics are Finder just executes iPhoto rather than