NW2004s sneak preview ABAP - BI

Hi all,
I have installed NW2004s sneak preview ABAP succesfulLY in my laptop. Now i created a cube, data source and ransforamtions in client 001 and tried to load data from a flat file. I m getting an ABAP run time error when i execute a DTP or info package to load the data.
How can i solve this problem.
Has any one come across this situation.
Regards
Praveen

Check out the note 946481. This should resolve your issue.
Please update the output
Regards
Pankaj

Similar Messages

ADS for SAP NW2004s Sneak Preview ABAP..

Hello folks,
Do we need ADS (Adobe Document Services) on SAP NW2004s Sneak Preview ABAP to run Interactive Adobe forms?
Regards,
Sarath.

I figured out we need ADS for SAP NW2004s Sneak Preview ABAP. Moreover we need a Java engine also.

New ABAP Editor in NW2004s Sneak Preview (ABAP)

I can't find the new ABAP Editor in WebAS 7.00, basically. Does anyone know where I can find it?

hi check this thread...
Re: AB4 - The new ABAP editor
vijay

Problem with Integrated Planning / NW2004s Sneak Preview

Has anyone successfully started the planning modeler of the integrated planning in NW2004s?
I installed the ABAP Edition of NW2004s Sneak Preview (NSP) and after that the Slim Java Edition (J2E). When starting the planning modeler I get the error message "Cannot find J2EE Engine" although the J2E-System is running according to the management console.
I suggest that you need to modify some of the parameters of the ICM. Has anyone some infos how to do that?
Thanks for your replies
Thorsten

Hi Thor,
as raja mentioned you need NW04s Java engine to integrate with NW04s ABAP sneak preview.Right now it is not available for download in SDN and service market place. it is still under ramp up and only available to SAP internal.
Thanks
Sarath.

NW2004s Sneak Preview Java install never starts up

I've installed NW2004s Sneak Preview Java on Windows XP Media Centre Edition with 2Gb RAM and 8Gb swapfile but the server never finished starting up properly.
I've tried with JSDK 1.4.2_09, _11, _12 and with the recommended Sun JDK parameters but always the same problem.
The MMC reports the server has started up completely, with all green icons, but when I open a browser and point at http://localhost:50100/irj or anything else I get a 503 Service Unavailable or 503 The Application Is Currently Stopped errors.
The CPU usage of the J2E service processes keep chugging away at about 70% CPU utilisation, and I left it going for 24hrs but it never finishes.
There dont seem to be any errors in the logs that indicate why it doesnt finish starting up.
Has anyone managed to do an install on XP Media Centre Edition, or any version of XP?
Any suggestions?
Steve

Rich,
Thanks for the reply. I still get the same problem. MMC reports SDM, Server0 and Dispatcher all running, and http://localhost:50100/index.html gives:
503   Service Unavailable SAP J2EE Engine/7.00
Cannot process a request for dynamic resources.
Details:   Web Container service is currently unavailable.
fter another 10 mins or so the error message is:
503   Service Unavailable   SAP J2EE Engine/7.00
Application stopped.
Details:   You have requested an application that is currently stopped
There are now a few hundred error messages in defaulttrace, which indicate 70 services failed, although it doesnt explain why. This is the first error in defaultTrace while starting:
Date : 07/04/2006
Time : 14:19:59:781
Message : Tue Jul 04 14:19:59 BST 2006 Thread[Thread-1] initiated a full thread dump due to: Timed out services:
Service com.sap.portal.prt.sapj2ee > hard reference to service adminadapter.
Service naming > hard reference to interface log.
Service connector > hard reference to service naming.
Service com.adobe~DataManagerService > hard reference to service iiop.
Service com.adobe~TrustManagerService > hard reference to service iiop.
Service ejb > hard reference to service connector.
Service cafumrelgroups~imp > hard reference to service naming.
Service webservices > hard reference to interface naming.
Service developmentserver > hard reference to interface naming.
Service ssl > hard reference to service keystore.
Service prtbridge > hard reference to service jmx.
Service com.adobe~PDFManipulation > hard reference to service iiop.
Service adminadapter > hard reference to service jmx.
Service tcsecsecurestorage~service > hard reference to service naming.
Service cafeuer~service > hard reference to service applocking.
Service jmsconnector > hard reference to service naming.
Service pmi > hard reference to service tcsecdestinations~service.
Service com.sap.portal.pcd.gl > hard reference to service jmx.
Service MigrationService > hard reference to interface container.
Service security > hard reference to service com.sap.security.core.ume.service.
Service licensing > hard reference to service ts.
Service jms_provider > hard reference to service security.
Service sld > hard reference to service locking.
Service jmx > hard reference to interface security.
Service DQE > hard reference to service jms_provider.
Service rfcengine > hard reference to service ejb.
Service tceujwfuiwizsvc > hard reference to service cafeugp~model.
Service tcsecsaml~service > hard reference to service adminadapter.
Service com.adobe~LicenseService > hard reference to service naming.
Service com.adobe~DocumentServicesConfiguration > hard reference to service naming.
Service telnet > hard reference to service shell.
Service deploy > service deploy start method invoked.
Service locking > hard reference to interface log.
Service cafeuodimnuacc > service cafeuodimnuacc start method invoked.
Service failover > hard reference to interface naming.
Service com.adobe~DocumentServicesDestProtoService > hard reference to service naming.
Service webdynpro > hard reference to interface naming.
Service cafeugpmodel > hard reference to service tcsecsecurestorageservice.
Service cafummetadata~imp > hard reference to service applocking.
Service cafeugpmailcf > hard reference to service naming.
Service tcsecvsiservice > hard reference to service tcsecdestinationsservice.
Service tceCATTPingservice > hard reference to interface naming.
Service ts > hard reference to service naming.
Service tcsecdestinationsservice > hard reference to service tcsecsecurestorageservice.
Service dsr > hard reference to service security.
Service keystore > hard reference to service security.
Service applocking > hard reference to service ts.
Service monitor > hard reference to service jmx.
Service com.sap.security.core.ume.service > hard reference to service dbpool.
Service http > hard reference to interface log.
Service cafruntimeconnectivityimpl > service cafruntimeconnectivityimpl start method invoked.
Service CUL > hard reference to service jmx.
Service tc.monitoring.logviewer > hard reference to service jmx.
Service tc.CBS.Service > hard reference to service dbpool.
Service apptracing > hard reference to service deploy.
Service com.adobe~XMLFormService > hard reference to service naming.
Service shell > hard reference to interface security.
Service tcsecwssecservice > hard reference to service tcsecsecurestorageservice.
Service servlet_jsp > hard reference to service naming.
Service com.adobe~FontManagerService > hard reference to service iiop.
Service iiop > hard reference to service ts.
Service bimmrdeployer > hard reference to interface container.
Service classload > hard reference to service security.
Service com.adobe~DocumentServicesLicenseSupportService > hard reference to service naming.
Service log_configurator > service log_configurator start method invoked.
Service com.adobe~DocumentServicesBinaries2 > hard reference to service naming.
Service configuration > hard reference to interface log.
Service basicadmin > hard reference to service jmx.
Service dbpool > hard reference to service connector.
Service appclient > hard reference to service naming.
Severity : Error
Category : /System
Location : com.sap.engine.frame.Environment
Application :
Thread : Thread[Thread-1,5,main]
Datasource : 1152021720729:D:\usr\sap\J2E\JC01\j2ee\cluster\server0\log\defaultTrace.0.trc
Message ID : 02004C4F4F5000000000001600000E38000417C15F2CAABB
Source Name : com.sap.engine.frame.Environment
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction :
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : /System
Resource Bundlename :
Session :
Source : com.sap.engine.frame.Environment
ThreadObject : Thread[Thread-1,5,main]
Transaction :
User :
Steve

Sneak Preview ABAP Edition just released

The Sneak Preview: ABAP Edition is now available. Kathy just announced it in the forum: Sneak Preview Update: ABAP Edition just released!!
The link to the Sneak Preview stays the same: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Basically this is a "slim" or "mini" ABAP installation with a compressed database component, comparable to the "slim" Java version. It's supposed to run with a minimum of 1GB but 2GB RAM is recommended.
Feedback on this edition, like the others, should go in the SDN Code Sample/Download forum (Software Downloads).
Cheers,
Marilyn

It would be really awesome to see the community weigh in on their experiences with this installation.
I'm going to suggest that we find a way to reward participants for doing a good job of sharing and documenting their experiences with the installation.
One idea would be to give a "double point" allocation.
That means that good content contribution (articles, blogs, detailed forum posts in a separate marked thread) that articulates the substance of what a downloader does in the course of the new ABAP Sneak Preview installation: tips and tricks, installation guide details, observations and detailed opinions, will be <u>doubly rewarded</u>.
Hey, this is a very time consuming activity, as I am experiencing myself at present.
Thoughts?
Marilyn

BW reports (BEx Reports) in Sneak preview ABAP version

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says <b>Please install Excel as viewer.</b>.
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

BW Reports( BEx reports) in Sneak preview ABAP trail version.

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

Error installing SAP Netweaver Sneak Preview ABAP

Hi
I'm getting the following error when I try to install SAP Netweaver Sneak Preview ABAP.
ERROR 2006-04-04 13:51:02
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host.
ERROR 2006-04-04 13:51:02
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
I'm on Windows XP SP2 Profession.
By the way... is this the right forum?
Thanks in Advance

Hi
This is something related to your anti virus software like norton.Please trun off Norton while Installing SAP and also make sure that the Id which you use to install SAP has administrator rights.
Thanks
prince jose

GUI Server Process Error when installing NetWeaver 2004s Sneak Preview ABAP

Hi,
I've downloaded the SAP NetWeaver 2004s Sneak Preview ABAP and tried to install it. As adviced in the Installing guide I installed the SDK first. When starting SAPinst.bat I get pretty soon this error - what can I do to solve this problem:
Thanks for Your help,
Markus
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
command : "C:\Programme\Java\jdk1.5.0_02\bin\javaw.exe" -cp "C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\instgui.jar;C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
The process that should run the GUI Server could not be started.
Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
directory of your Java installation. As an alternative you may start the GUI Server on another host
(for details please consult the installation guide).
103 controller.errorStartingGuiWindows 1580
Exit status of child: 1

Hi,
I've stored the folders and files into root drive and installed jdk 1.4.2.08 - still the same error messages.
What strikes me:
'command : "C:\Programme\Java\jdk1.5.0_02...'
Why 'jdk1.5.0_02'? My installes version is 1.4.2_08!
I don't know if my environment variables are right. I'm quite a JAVA dummy: I suppose these variables are to be set within the SDK? Which variables should I check (and how)?
Message was edited by: Markus Jarasch

Sneak Preview ABAP - Password for Database Manager Operator Control

Hello All , My first installation 'SAP NetWeaver 2004s Sneak Preview ABAP' was aborted where I did supply the password for Database Manager Operator Account : Control . When I am trying to reinstall , the installation fails and it comes back with a message
' The check of the control user password failed . Check logfile XCMDOUT.LOG '.
I think I am supplying the correct password which I entered originally .
Thanks
Rajesh Kapoor

hi there,
the default password for control is control.
According to about threethousandfivehundredandtwelve postings in here your problem might arise due to the usage of special characters in the password, e.g. a +(plus).
What do the last few lines of your XCMDOUT.LOG read?
regards,
anton

Sneak Preview ABAP NW04s license expired

Hi,
I havenu00B4t been using the SNeak Preview ABAP 2004s system for a month. Now I want to use it again, but the license expired at Oct 17. I put the system in back date, i.e. Oct 16 to be able to connect with the system and I tried to install the new license, which I got from SAP Developer Network.
My problem is that I am not able to install the new license. The expiration date is 20070221 because I got the new license, but when I try to install it, the system hangs and after a while I get a Dump.
I start the system with nspadm user and I also tried with c:\usr\sap\NSP\SYS\exe\nuc\NTI386\saplicense -install, but it was impossible too.
Please, can anybody give me an answer for this? Any suggestion?
Thanks in advance
Investiga

I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
Anyway, Thanks a lot to all
Investiga

Sneak preview ABAP - Developer Key too long.

I installed Sneak preview ABAP edition and I requested the developer key, the key I have received is of 24 digits where as the size of the screen field is 20 digits. I don't know how I can get the correct key.
Thanks,

Hi Gregor,
I could'nt able to give 10 because, I resolved the issue my self by referring to the article you wrote and I set this question to solved before you sent me the link. The radio button for the "Solved Problem (10)" is disabled. Any way I will give you another 6 now. Enjoy.
Suman

NW2004 Sneak Preview installation

I am trying to install NW2004-SP16-Sneak-Preview on a 2 GB laptop with {Windows XP-MediaCenter Edition-Version 2002-SP2).
The installation finished successfully.The database and java instances have started successfully.
When we try to login like http://localhost:50000/irj, I get an error " 503 service unavailable
application stopped "
Details: You have requested an application that is currently stopped".
Does anyone has a solution to this issue?. is it any thing do to with the Media Center Edition?.
Any help is greatly appreciated.
Regards
Selvam

Hi Selvam,
Is the J2EE home page i.e http://localhost:50000 opening?
If yes, then probably the irj application might not be
running. Go to Visual Administrator usr/sap/.../j2ee/admin
go.bat -> server -> services -> deploy -> applications
and start the sap.com/irj application.
Regards
Srikishan

NW2004s Sneak Preview - Unable to logon using BEx Analyzer or WAD

We have installed SAPNW2004s Sneak Preview Full ABAP Edition (with Web Dynpro for ABAP!) with the GUI recommneded on SDN download page.
SAP Frontend Package 6.40 Final Compilation 3
=============================================
SAP Frontend Package 6.40 Final Compilation 3 for Win32
Product Version   Release State    Patchlevel
GUI      6.40      Final           8
SCM      4.0        Final           1
BW       3.5       Final           3
KW       7.0       Final              0
I can log on to Client 001 and access BI, but on trying to access using the BEx Analyzer and Web Application Designer, I get a error message saying the "User or password is not correct (Repeat Logon).
I have already provided all relevant authorization to the user I am using to logon to BEx. My Opersting system is Windows XP Professional SP1
However, if I use the RRMX transaction (using the old GUI)
SAP Frontend Package 6.20 Final Compilation 4
=============================================
SAP Frontend Package 6.20 Final Compilation 4 for Win32
Product Version   Release State    Patchlevel
GUI      6.20      Final          32
APO      3.0A      Final          19
BW       3.0B      Final           7
KW       5.2       Final              4
SEM      3.5       Final              0
I can log onto BEx anlyzer. Your help in resolving the problem would be highly appreciated.

Roger,
When installating the Comp 4 GUI make sure you have selected the BI 7.00 Add-on. There you will also find BW 3.5. For the time being just select BI 7.00 Add-on. The Patch will only update the files if they are already exisiting (installed).
Only ensure that the user has following roles assigned:
SAP_BW_ALL
SAP_BW_ANZEIGER
SAP_BW_AWTEST
SAP_BW_DEVELOPER
SAP_BW_SEM_BPS_APPLICATIONS
SAP_BW_SEM_LP
and Profiles:
SAP_ALL
SAP_NEW
S_A.SYSTEM
S_RS_ALL
RS_RS_EXPL_A
Plus a Z_BI_ROLE (having ALL authroization for below objects)
Z_BI_ALL                            All BI Authorizations
5       Manually   Cross-application Authorization Objects                      AAAB
        4          Manually   Authorization Check for RFC Access                           S_RFC
                                                              5       Manually   Basis - Development Environment                              BC_C
4          Manually   ABAP Workbench                                               S_DEVELOP
                                                              5       Manually   Business Information Warehouse                               RS
        4          Manually   Infrastructure of the Analysis Authorizations                S_RSEC
        4          Manually   Data Warehousing Workbench - Objects                         S_RS_ADMWB
        4          Manually   BI Analysis Authorizations in Role                           S_RS_AUTH
        4          Manually   Business Explorer - BEx Web Templates (NW 7.0+)              S_RS_BTMP
        4          Manually   Data Warehousing Workbench - InfoSource (Flexible Update)    S_RS_ISOUR
        4          Manually   Data Warehousing Workbench - Open Hub Destination            S_RS_OHDST
        4          Manually   Data Warehousing Workbench - Process Chains                  S_RS_PC
        4          Manually   Business Explorer - Individual Tools                         S_RS_TOOLS

NW2004s sneak preview ABAP - BI

Similar Messages

Maybe you are looking for