NWTAPE.CDM auto-load question

I have a NetWare 6.5 SP7 server and I am trying the Yosemite Backup software to work with Tangberg_LTO-4 HH tape drive.
When I load the adpu320.ham driver, I got error: Device TANGBERG_LTO_4 HH has not been tested with this driver. Driver will attempt generic support. Use at your own risk!!
Then when I tried to do a restore from the Yosemite Backup program, the server abended and I have to cold boot the server.
I then noticed if I unload NWTAPE before I load Yosemite Backup, it seems to do backup and restore fine. I saw some people have issue with NTAPE after SP7 and the Yosemite backup software is only certified to run on NW6.5SP5. I am checking with their technical support to confirm if I really need to have the NWTAPE loaded for their backup program to run.
My question how I can stop NWTAPE from auto-load, do I just rename the NWTAPE.* from the C:\NWSERVER\driver folder?
Secondly, why do I need to load NWTAPE? I saw some posts for Arcserve that NWTAPE has to been unloaded before loading Arcserver.
Hope someone can help.
Thanks
Che

Hi,
cche wrote:
> I am checking with their technical support to confirm
> if I really need to have the NWTAPE loaded for their backup program to
> run.
No. The opposite is true. You have to unload it (or not even load it in
the first place), and that has always been the case.
> My question how I can stop NWTAPE from auto-load, do I just rename the
> NWTAPE.* from the C:\NWSERVER\driver folder?
Either that, or you can add "set auto load of cdm modules=off" into your
startup.ncf.
> Secondly, why do I need to load NWTAPE?
Above said, you don't.
> I saw some posts for Arcserve
> that NWTAPE has to been unloaded before loading Arcserver.
Nwtape has to be unloaded or not loaded with every backup software that
doesn't use it, that isn't specific to Arcserve at all. The only two
products that utilize nwtape are Novells own sbackup, and Syncsort
Backup Express.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Similar Messages

I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

garysm99 wrote:
Not familiar with structure view. How do I go there?
click in IDVD on this button

Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

Ok, no problem i found this help articles:
https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
http://www.youtube.com/watch?v=OukBlXfOP8Y

Auto Load Apps

Is there any way to auto load my most frequently used apps when I boot up my PB?

Hi MountainDew,
Thanks for your question about your BlackBerry PlayBook tablet.
Currently you would need to relaunch your applications after powering on your device.
If you wish to keep these applications running, use Stand By on your tablet rather than powering off. This will keep those apps running as your tablet is still actively running.
Hope this helps.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Module 'asus-nb-wmi' stopped being auto-loaded after kernel update

Well, the module 'asus-nb-wmi' which takes care of some FN keys and keyboard backlight stopped being auto-loaded after the latest kernel udpate (3.9.3), so I had to add it to /etc/modules-load.d/ to get it working. This has happened before, between kernel updates and I had to re-install arch to fix it, but now I found that manually adding the module is a nice solution, but I want it to be loaded automatically or at least know why does this happen. Kernel modules, such as this one, should be loaded automatically right?
Best regards.
Last edited by DanielRS (2013-07-04 19:54:48)

I think there is a valid question here; Same thing happened to me.
Upon a default install of arch, the module was auto-loaded without the user touching any configuration files
at some point during kernel updates, the module is no longer auto-loaded
the user then has to find out what is happening and go add the module to the appropriate config file to force load on boot.
So the larger question is; without config files being taken into consideration, how does the kernel decide what modules to load? f
I know it has something to do with the hardware that it detects, but am unaware if this is something within the RC or systemctl booting system, or if this is part of the kernel.
I'm going to dig around some more on the internet, as i'm sure the answer is out there somewhere.. but if someone that is on this forum happens to read and know the answer, it would be nice to know
thanks

Is there auto load balance between 2 active webi services?

Hi ,
I have not seen any kind documentation from SAP whether BOBJ can auto load balance requests in round robin fashion between 2 or more webi services.
The only theory or belief that i see & hear is that upon reaching the max connection threshold of one webi service, bobj will start diverting the next requests to second webi service.
So now i am looking for some kind of clarification on whether auto load balance happens between multiple webi services in round robin fashion or not.
Please share if any one has idea about this.
Thanks,
Srikar

Thanks to everyone who tried to respond to my question.
But i just got below response from SAP:
=====================================================
I would like to inform you that CMS distributes the load (jobs) to
servers according to the server availability (maximum jobs allocated
to individual server). This is a generally how load is balanced
between CMS and various job servers and processing servers.
=====================================================
Now i am more confused. I personally did some little testing by creating 2 webi services and tried to view multiple webi reports. What i observed is it does pick up different webi services only while at the start of report viewing. But once it picks up perticualr webi service, that same user session is sticking to previously picked up webi service and always goes to the same process for processing.
But now SAP response is bit more confusing.
Thanks,
Srikar

How do I stop last web pages from auto loading in Safari?

I find the feature of Lion that auto-loads previous web pages (and previous open applications) annoying. I want to stop this function. I see the checked box that asks if I want to re-open applications when logging out but I want the default to be to NOT re-open the apps. I equally dislike the auto-opening of previous web pages in Safari. I know that I can clear my history but what I want is for my homepage to open when I run Safari and not the last page viewed. Any solutions?
Found this for Safari in the forums...
Go to terminal and type in the following:
defaults write com.apple.Safari ApplePersistenceIgnoreState YES
If you decide that you rather have the new resume behavior, execute the above commands but change YES to NO.
You can also do the same for Preview:
defaults write com.apple.Preview ApplePersistenceIgnoreState YES

iDrifter: The full command is:
defaults write com.apple.Preview ApplePersistenceIgnoreState YES
I was having the same problem and this is what I did:
1) Closed Safari
2) Changed the setting (mentioned) above in System Preferences
3) Enter the "defaults write ..." command into Terminal.
Now whever I launch Safari it does not load any pages.
HTH,
RJ

PDFmaker addin will not auto-load to Word

Using Office 2013 and Acrobat Pro 11.0.08. Until this week, the PDFmaker add-In was always enabled in Word. Then there was an error doing a merge to PDF.
Now every time I start Word, PDFmaker shows as inactive ("load behavior: unloaded") until I go to File | Options | Add-Ins and check the box to load it. Then it works fine until I close Word and have to do it again.
How do I get it to auto-load?? I can't find a place to set that.

You can solve this problem by editing the "LoadBehavior" registry entry. The value needs to be 3 (load at startup).
With Office 2013, that registry key is at
HKEY_CURRENT_USER\Software\Microsoft\Office\Word\Addins\PDFMaker.OfficeAddin
One note - the Add-In was loading when I ran as the administrator but not when I just opened a Word doc. I checked this same registry key under HKEY_LOCAL_MACHINE and it was set to 3. I am guessing that is why it worked when run as administrator. For some reason the LoadBehavior key had been revised to 0 on my HKEY_CURRENT_USER registry key.
Nevertheless, the fix above will work because I just tried it out on my machine and another here in the office which had the same issue.

Tape Auto-loader Recommendations

I have an Xserve RAID that has grown to about 1 TB of data. Currently I am backing up to single SDLT drive. A full back up, which I do weekly, takes about 4 or 5 tapes. I'm thinking it is time for an auto-loader (tape library). I'm looking at the Exabyte VXA-320 PacketLoader mostly because of its $2,300 price tag.
Has anyone had any experience with this device? Are there any other devices that I should be looking at?
Thanks
Henry
Powerbook G4 1.5GHz Mac OS X (10.4.5)

I'm a little surprised at the media costs of SDLT vs.
VXA, although I've not spent much time looking at VXA
so you're undoubtedly correct.
I was looking at the media prices for SDLT 600 ($100) vs VXA ($60). Currently, we use SDLT 320. I was enticed by the SDLT 600's backwards read compatibly. But the SDLT 600 has the highest tape cost.
I think I'm going have to flip a coin to choose between the LTO-2 and LTO-3. The LTO-3 tapes cost twice as much as the LTO-2. However the LTO-3's hold twice as much as the LTO-2's, so the tape cost is a wash. The LTO-3 drive is $1000 more than the LTO-2.
Choices, Choices, Choices...
Powerbook G4 1.5GHz Mac OS X (10.4.1)

Stop auto load of account information on Skype new...

How do I stop my info from auto loading on a skype reinstall[ New ]
Options
2 minutes ago
I am selling my laptop -
I have installed Skype and installed it fresh.
Unfortunately every time I go thru the process, the re-installed Skype also includes my account and all my contacts.
How in the heck can I stop this from happening??????
HELP!!!

http://community.skype.com/t5/Subscriptions/How-do-I-stop-my-info-from-auto-loading-on-a-skype-reins...

Auto load of vendors

Hi every body,
Can any one help me in solving a problem to auto load of vendors from one organisation to another,
thank you,
ram

Hello Sunder,
What do you mean by auto load from one organization to another? Please provide additional information.
If you mean that you already created vendor data for one purchase organization and wanted to extend for another pur organization, then there is std LSMW object is available for creating vendor master data. but this is not automatic, you need to provide the data.
If you mean updates from legacy system to SAP system, in that case also you need to provide the IDoc/flat file which will upload data in SAP system regularly.
Regards
Arif Mansuri

Safari will not Auto load username password

This is very strange,
All my websites will load my username and Passwords except for my website with Scottrade.com
I double checked to ensure that my username password is in profile and it certainly is.
What can I do to fix my username and password auto load for my trading account, please
robert

I cleared my Cache and did a Safari Reset.
And I still have the same problem.

Will not auto load gotomypc

gotomypc is asking to install java to auto load gotomypc site. Java is already installed and if I try to install again I will get error 1016
pc vista 64

I cleared my Cache and did a Safari Reset.
And I still have the same problem.

MupdfPage: an add-on for mupdf for auto-loading/saving page numbers

I love MuPDF, but it doesn't store page number before you exit as other viewers do. I wrote a new header 'pdfpage.h' under the 'apps' directory and hacked 'pdfapps.c' a bit so that now it auto-saves and loads page numbers. The hack is based on a svn version, which keeps changing and makes patching hard, so I put my hacks in the README.txt.
The source can be retrived here: https://github.com/kaikaizi/mupdfPage/
To use, clone latest source:
git clone git://git.ghostscript.com/mupdf.git
drop 'pdfpage.h' into apps directory, and apply the 4 changes in 'pdfapps.c'.

Check out llpp and zathura. The former uses mupdf to render PDFs, the latter can (with a plugin). Both are very fast (llpp just FLIES), and have that auto-loading/saving page numbers. And, zathura has genious keybindings.
But cool project. Thanks.

TMW: auto loading employee list in time data screen

Hi all,
Within TMW one can have an employee list. I'd like to get the employee selection auto loaded in the time data subscreen. Without double clicking on the employee selection or using the button "copy selected records".
Anyone have an idea how to do this?
Please help!
Kr,
Jonathan

Sakira,
Thanks for the feedback. I don't think i was clear enough, sorry.
The problem i have is in the Time Manager Workplace. There a user gets an employee selection (we are using the multiple persons view btw). If the user wants to register absences for his/her crew he still needs to transfer his crew members to the time data screen.
Standard only the first person of his crew is transfered. It would be really helpfull if his complete crew was transfered automatically. So he starts TMW and can immediately start registering absences for his crew.
BTW thanks for the quick response!
Kr,
Jonathan

NWTAPE.CDM auto-load question

Similar Messages

Maybe you are looking for