OAS 10g R-2 10.1.2 Installation Query.

Hello all,
I have installed database Oracle 9.2
I want to use only forms and report services of OAS 10g R-2 10.1.2
I am not able to complete the installation.
at the time of installtion i got the information i have to install Oracle Infrastructure.
and in Oracle Infrastructure it is asking for Oracle Internet Directory.
I do not have have idea about the oracle internet directory.
i have developed application using Developer Suite 10g forms 10g and oracle database 9.2.
so i want to deploy at client side now.
I am geeting problem of Oracle Internet Diredctory.
can I install only forms and report services like <Oracle Developer Suite 10g> in OAS 10g?
(without Oracle Internet Directory);
From
Chirag Patel

Yes, if you only need Forms and Reports, there is a separate product for the standalone version Forms and Reports services, without infrastructure, much lighter. See http://download-uk.oracle.com/docs/cd/B19375_02/doc/frs/index.htm

Similar Messages

OAS 10g (10.1.2) Windows install -- different location for pagefile.sys

During installation of OAS 10g (10.1.2), by default the pagefile.sys on the C:\ is checked to see that it has at least 512 MB. The pagefile.sys on our Windows server is located on a different drive. Is there a way to specify to the OAS installer to scan for the pagefile.sys on a different drive?

Hi,
Do you get this error when you try to run forms configured using OAS 10g 10.2.0.2.
We run a Web application using OAS 10g 10.2.0.2 and after leaving the application idle, more than half an hour, ora-12152 is displayed and the application is in a deadlock.
Can you please suggest any solution for the same.
Should the SQLNET.AUTHENTICATION_SERVICES= (NTS) be commented in sqlnet.ora file.
Sridharrs

BIG-IP Timeout with OAS 10g 10.1.2.0.2

We have installed OAS 10g 10.1.2.0.2 in two servers which are Load-balanced using hardware load balancer BIG-IP configuration.
10g As installation is done along with Infrastructure + Middle-tier.
But after all configuration after we run the Oracle forms application and keep it idle for more than one hour, Database connection with the Application server is disconnected due to Global Idle Timeout value of 1 hr in BIG-IP configuration.
Is there any Timeout parameter in OAS 10g 10.1.2.0.2 which can override the Idle Timeout value of BIG-IP Configuration.
Appreciate your response at the earliest.
Thank you.

My first thought is that you suggest the app server to database connection is timing out - I'm assuming you're not using the load balancer to balance sqlnet connections so are we actually talking about a firewall in between and not the Big IP?
If it is the load balancer then, looking at this another way... on Cisco CSS 11500 series you can definitely set the timeout on the load balancer to a specific value (or to never timeout), so you can probably do the same on the Big IP.
Note: I wouldn't recommend setting the connections to never timeout as this can potentially waste memory on your load balancers which might look like a memory leak after, say, 6 months in a production environment without a reboot.
Hope this helps.

Crazy JNDI Problem... (Third Party DB Driver Effects Lookup???) (OAS 10g)

Ok folks, I need some help here...
The scenario is this...
I have a simple web app (one jsp) which is used as a "status checker" to ensure that all the session beans we expected to be deployed are actually deployed and that they can be looked up with JNDI and run some small status routine... That war file for that app is included in the ear file with all of the session ejb jar deployments...
Now, the collection of session beans references three different datasources at one time or another... 2 of which are oracle databases and 1 is a DB2 database...
Lets name them as follows...
OracleDataSource1
OracleDataSource2
DB2DataSource
Now, if I configure the three datasources in the oracle standalone OC4J 10g datasource file and deploy the ear file to standalone OC4J 10g, all of the lookups work, and it successfully uses the datasources... no problems at all...
Ok, so now I try to deploy the ear on OAS 10g using the enterprise manager console, and deployment works fine...
If I run the app before configuring the datasources, of course the lookups work, but the status routines of certains beans fail because they are not able to look up the datasources... no big deal, just start adding the datasources...
I configure OracleDataSource1 and rerun... now things still work, the lookups for all the beans works fine, and some pass now, but others still want the other datasources...
Now configure OracleDataSource2 and rerun... as before, things all work great but there are still complaints looking for the DB2DataSource from a couple of the routines...
Herein lies the problem...
I configure DB2DataSource and rerun, and boom, my program crashes claiming that the lookup of the bean failed...
Now mind you, these beans have all been looked up numerous times during previous runs, and absolutely nothing has been changed with the application... in fact, even the beans that wanted the DB2DataSource were looked up successfully and then just complained of no datasource during their status routine execution...
It's just that once I configure the DB2DataSource, all of a sudden my lookups don't work... I have tried commenting out a couple of the beans, and regardless of which lookups are commented out, it still fails saying it can't find any of the beans, even if the beans i'm trying to look up don't use the DB2DataSource, it doesn't seem to matter...
The InitialContext used for the lookup uses the default "new InitialContext()" constructor and the lookups work fine when the DB2DataSource is not configured, but once it is, the lookups fail saying the objects are not found...
I have consulted with a few other developers here, and noone can seem to understand why this behavior is happening... I have added debugging statements to print the contents of the context's environment, and it is always empty regardless of whether the lookups pass or fail...
The ONLY difference I can see with this DB2DataSource is that it uses an external 3rd party driver... The oracle connections use a driver which was packaged with the OAS installation... I feel pretty strongly that it has to do with the driver because if I have the DB2DataSource configured (causing the failure) and then I edit that datasource to say that it should us the oracle driver, miraculously it causes the lookups to work again, except now I get the error saying the oracle driver doesn't like my DB2 jdbc url...
I'm sorry for the long post, but I'm hoping that at least one person has encountered this before... I cannot think of any reason why the configuration of that datasource with the third party driver would cause these problems, especially when the exact same configuration and setup DOES work with standalone OC4J 10g, even with the DB2DataSource configured... ????? And the fact that the lookups work fine until that datasource is configured really blows my mind... i wouldn't think the datasource configuration should have anything to do with whether the lookups of the session beans succeed or not... hahaha...
Any help would be great... I'm pullin my hair out here... :)
Thanks,
-Garrett

No, I have not asked on the oracle forums yet... :)
It seems that the cause is the driver itself... if I set a different driver for the datasource configuation, the lookups work but it just complains about the driver not being correct for the individual beans...
I have found some documentation claiming that there is an OAS version of the DB2 driver, as well as a Merant version, but I can't seem to find jar files for either...
Does anyone know where I can download the "YMdb2.jar" file? Supposedly this contains the DB2 DataDirect driver that I need...
Thanks,
-Garrett

Need help with error configuring Identity Management in OAS 10g

Hi,
I am configuring SSO in OAS 10g, After successful installation (with sso option selected) when I go to the management interface and attempt to configure Identity Management it fails with the following error:
Error configuring identity management. oracle.ias.configtool.config.ConfigException: Unable to retrieve SSO DB information.Base Exception: oracle.ias.configtool.config.ConfigException: oracle.ias.configtool.config.ConfigException: oracle.ias.configtool.config.ConfigException: Unable to retrieve SSO DB information . Base Exception : Error when reading seeAlso of replicaid entry - java.lang.NullPointerException Status code 3
I am totally stumped, cant find any instance of this error in docs etc. PLEASE HELP.
I am trying to setup OAS to SSO with MS AS for oracle ebusiness suite 11i.
Thanx in Advance,
Sean

Check that your insfrastructure database is up and running, it's accesible, as well, check for OID procs and demons that ports for OID are open and that you can make ldapbind this last may not be necesary as the error say about database, but is good to check also. Go to *$ORACLE_HOME/opmn/logs* and check the files there to see if other process are having problems.
Greetings

How to execute a procedure on OAS 10g release 3

Hi,
1 - I installed OAS 10G, and Oracle 10g, but I don´t know what the path to execute a html procedure(htp.p('hi')...etc), the installer say that Oracle HTTP Server was installed in http://server:80/, but I try and I have a page not found...
Tks.

How I make sure that I can access static HTML??
I read the documentation and created dad but not yet he functions, now I receive the message
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-Application-Server-10g/10.1.3.0.0 Oracle-HTTP-Server Server at araga Port 80
this is the dad
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
<Location /plsqlapp>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername scott
PlsqlDatabasePassword tiger1
PlsqlDatabaseConnectString orcl
PlsqlAuthenticationMode SingleSignOn
PlsqlDefaultPage scott.home
PlsqlDocumentTablename scott.wwdoc_document
PlsqlDocumentPath docs
PlsqlDocumentProcedure scott.wwdoc_process.process_download
</Location>
What´s still wrong
if a try tnsping orcl, its ok.

Q: OAS 10g using 100% of my CPU

OS=WinXP
Single Processor
Hello!
I'm using OAS 10g on my laptop as my web server for my single user PeopleSoft HR installation. When I load the service "OracleOASProcessManager", my CPU utilization gets pegged at 100% and stays there. My laptop has a 1.73Ghz processor with 2GB RAM.
Does anyone have any recommendations for turning OAS so that it does not always consume so much of my CPU's resources?
Thanks!
-Bryan
null

Thanks for your reply, Jacco. I will check my log files. Which ones are most relevant? I noticed that my log files are quite large (see directory listing below). Perhaps my log settings are too high?
-b
C:\oracle\product\OAS\opmn\logs>dir
Volume in drive C has no label.
Volume Serial Number is 285F-3BB6
Directory of C:\oracle\product\OAS\opmn\logs
2006-05-18 05:11 <DIR> .
2006-05-18 05:11 <DIR> ..
2006-05-18 08:22 1,045 dcm-daemon~dcm-daemon~dcm~1
2006-05-18 08:29 3,148 HTTP_Server~1
2006-05-18 08:29 56,963 ipm.log
2006-05-18 08:29 8,772 OC4J~home~default_island~1
2006-05-18 08:29 155,050 OC4J~PeopleSoft~default_island~1
2006-05-18 08:29 480,114,044 ons.log
2006-05-17 22:53 1,536,002,155 ons.log.06-05-17_22_53_46
2006-05-18 05:11 1,536,000,400 ons.log.06-05-18_05_11_13
2006-05-18 08:29 958 service.log
2006-05-18 08:29 <DIR> states
9 File(s) 3,552,342,535 bytes
3 Dir(s) 1,010,249,728 bytes free

Hardware Requirements for OAS 10g

Hi, everybody
I'm looking for the hardware requirements to deploy an OAS 10g web server on Windows Platform. Have somebody this info?
Thanks
Mensaje editado por:
alejoarlyahoocom

It is subtly different for each operating system and each combination of components. Since you are reluctant to tell us the operating system, I refer you to the documentaiton .... on the following page
http://www.oracle.com/technology/documentation/appserver.html
pick out the OS of interest, pull up the Installation manual, go to CHapter 4 "Requirements" to get sizing info, and perhaps even read Chapter 5 "Things You Should Know Before Starting the Installation" ...

I find an error at instalaling OAS 10g

Hello,
When I am installing the OAS 10g (9.0.4) on a Linux 2.6.9-78.ELsmp, i have the next error launched when I gave the first next on the OUI.
The operating system version that you're running is not supported (at the time of this release. Please check Metalink for the latest supported versions.
All requirements met.
Using paramFile: /pe04oo/ias/sw/Disk1/install/linux/oraparam.ini
Checking requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3 Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2009-02-06_04-07-43PM/installActions2009-02-06_04-07-43PM.log
The operating system version that you're running is not supported (at the time of this release. Please check Metalink for the latest supported versions.
All requirements met.
Checking if CPU speed is above 450 MHz.
Actual 3000 MHz Passed
Checking for Kernel version 2.4.21-4.EL Passed
Checking for glibc version glibc-2.3.2-95.3 Passed
Checking operating system packages: gcc-3.2.3-20,compat-gcc-7.3-2.96.122,compat-gcc-c++-7.3-2.96.122,compat-libstdc++-7.3-2.96.122,compat-libstdc++-devel-7.3-2.96.122,openmotif21-2.1.30,setarch-1.3-1,pdksh-5.2.14,sysstat-4.0.7,gnome-libs-1.4.1.2.90-34.1,libstdc++-3.2.3,compat-libstdc++-devel-7.3-2.96.122,compat-glibc-7.x-2.2.4.32.5 Failed <<<<
>>> Package gcc-3.2.3-20 is missing
>>> Package compat-gcc-7.3-2.96.122 is missing
>>> Package compat-gcc-c++-7.3-2.96.122 is missing
>>> Package compat-libstdc++-7.3-2.96.122 is missing
>>> Package compat-libstdc++-devel-7.3-2.96.122 is missing
>>> Package setarch-1.3-1 is missing
>>> Package sysstat-4.0.7 is missing
>>> Package gnome-libs-1.4.1.2.90-34.1 is missing
>>> Package libstdc++-3.2.3 is missing
>>> Package compat-libstdc++-devel-7.3-2.96.122 is missing
>>> Package compat-glibc-7.x-2.2.4.32.5 is missing
Checking swap space: must be greater than 1536 MB.
Actual 13093MB Passed
Error : Packages version not per Installation requirement.Continue? (y/n) [n]
$ vi oraInstall2009-02-06_04-07-43PM.err
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-06_04-07-43PM/oui/lib/linux/liboraInstaller.so: /tmp/OraInstall2009-02-06_04-07-43PM/oui/lib/linux/liboraInstaller.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.load0(Unknown Source)
at java.lang.System.load(Unknown Source)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:368)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:120)
at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:195)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.getDefaultLocationFileLoc(OiipgBootstrap.java:595)
at oracle.sysman.oii.oiif.oiifw.OiifwInvLocWCCE.setInvLocVar(OiifwInvLocWCCE.java:412)
at oracle.sysman.oii.oiif.oiifw.OiifwInvLocWCCE.setupInventoryLocation(OiifwInvLocWCCE.java:343)
at oracle.sysman.oii.oiif.oiifw.OiifwInvLocWCCE.initialize(OiifwInvLocWCCE.java:220)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:135)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:907)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:217)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:388)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:663)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:575)
Exception java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path occurred..
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:386)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:120)
at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:195)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.getDefaultLocationFileLoc(OiipgBootstrap.java:595)
at oracle.sysman.oii.oiif.oiifw.OiifwInvLocWCCE.setInvLocVar(OiifwInvLocWCCE.java:412)
at oracle.sysman.oii.oiif.oiifw.OiifwInvLocWCCE.setupInventoryLocation(OiifwInvLocWCCE.java:343)
at oracle.sysman.oii.oiif.oiifw.OiifwInvLocWCCE.initialize(OiifwInvLocWCCE.java:220)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:135)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:907)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:217)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:388)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:663)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:575)
What can I do?

Hello,
Do you know if you have this packages with earlier versions?
When this happen the installer only check for the version that contain in the oraparam.ini. But if you are trust that you have all the packages only in newer versions, you can try this.
runInstaller -ignoresysprereqs
It will make the same verification, and find same problems, but with this flag it will jump to the next part and continue installing. Try to be careful of this flag because if you miss one of the prerequisits from documentation, you may have a highly option to fail in the configuration assitants or find some erroneus behavior of the App.
Regards.

Problem Installing OAS 10g Infrastructure on WinXP

When installing OAS 10g Infrastructure on my WinXP Laptop the OPMN configuration assistant fails while starting the apache http server, because apache.exe fails (apache.exe has encountered a problem and needs to close...). Starting the apache http server using 'dcmctl start -ct ohs' results in the same behaviour. This is reproduceable. I know that this kind of installation in not supported. Any idea what the reason could be for this ?
Thanks Thomas

When installing OAS 10g Infrastructure on my WinXP Laptop the OPMN configuration assistant fails while starting the apache http server, because apache.exe fails (apache.exe has encountered a problem and needs to close...). Starting the apache http server using 'dcmctl start -ct ohs' results in the same behaviour. This is reproduceable. I know that this kind of installation in not supported. Any idea what the reason could be for this ?
Thanks Thomas

Weblogic 10.3.2 as a replacement of OAS 10g full of Oracle Forms

hello, quick question: Can I take a entire system in Oracle Forms with OAS 10g technology and deploy them on a Weblogic 10.3.2 as an upgrade/replacement option ?
Can weblogic run Oracle forms out of the box or is there a vendor lock-in trick ?
Thanks in advance,
fabio

Out of the box, WLS is not able to run Oracle Forms.
At the time of this writing, for a complete replacement you need the following components:
- WLS 10.3.2
- OFM 11g Forms
(optional for single sign-on)
- OFM 11g OID
- AS 10.1.4 OID DAS and mod_osso
HTH,
--olaf

Migration from OAS 10g to Weblogic 10.3

Hello,
I migrate large app from OAS 10g to Weblogic 10.3.
1.
The main part of the job was to prepare descriptors for Weblogic. Unfortunatelly I don't find any tool that could do the job:( There are some problems with descriptors namespaces. This schema and namespaces given in 10.3 docs are not working (not available):
http://edocs.bea.com/wls/docs103/ejb/DD_defs_reference.html
So I use the one from 10 release in weblogic-ejb-jar.xml:
weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/10.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/10.0 http://www.bea.com/ns/weblogic/10.0/weblogic-ejb-jar.xsd">
and form 9 release in weblogic-cmp-rdbms-jar.xml:
<weblogic-rdbms-jar xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-rdbms20-persistence.xsd">
There are also some bugs in docs about ejb relations.
After fixing some schema compliance exc this step success.
2. Next the EJBComplianceChecker - its much more restrictive than OAS verification. So updates in ejb interfaces are necessary. It is not a problem with small app but when there ale a lot of code/branches to migrate it's become a problem. I have been looking for some switch that could help with this but with no result/
EJBComplianceChecker - Spec veryfication level
3. Now after EJB compliance checker done its job with success I have an exception that I do not understand:
An error occurred during activation of changes, please see the log for details.
Exception
preparing module: EJBModule(corpo_ejb.jar)
Unable to deploy EJB: corpo_ejb.jar from corpo_ejb.jar:
There are 1 nested errors:
java.io.IOException: JDT compilation error! at
weblogic.ejb.container.ejbc.CompilerForJDT.compile(CompilerForJDT.java:66)
at
weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:357)
at
JDT compilation error!
Could you please give me some point where the problem could be? I don't have any idea where to start looking for..
What are your experiences with migrations from OAS to Weblogic 10?
Thanks in advance!
Edited by: Stoigniew Sztank on Oct 10, 2008 4:00 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 4:01 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 4:02 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 4:04 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 8:05 AM

Hi Stoigniew Sztank,
I am working on migrating Enterpirse application developed using Struts, Ejb2.0, JMS. Its been deployed on OAS 10G and Websphere, but I need to deploy the application on Weblogic 10.3. It seems you have migrated a J2ee application from OAS 10G to Weblogic 10.3. Please can you list me the steps that you followed to migrate the application.
As per my understanding follwing things needsto be taken care of:-
1) Weblogic Descriptor files:
1.1 Weblogic.xml:- we added security roles and ejb-reference-description for the ejbs.
1.2 Weblogic-ejb-jar.xml for all the ejbs used in the application.
1.3 Weblogic-application.xml
1.4 Resource Adapter
2) JMS queue set up
3) JDBC set up
It would be a great help if you can let me know what are the steps to migrate the application.
Thanks and Regards
Deepak Dani

Can I set classpath for OAS 10g?

Hi, 
 
I have OAS on my workstation. Here are the details. 
Server : Oracle Application Server 10g Release 3 
Version : 10.1.3.1.0 SOA4 
Build : 061008.0900.00025 
Platform : Windows XP - SP2 
 
I want to set an explicit classpath for complete OAS 10g as such and not to an individual oc4j application. Will I be able to do it? 
I saw the System Properties after my server started. 
It has a name-value pair as "java.class.path oc4j.jar". 
So, I assume all my classpath settings (done thru Environment Variables from My Computer) are lost.? I want to set it explicitly during the server startup itself. Can I do that? 
I tried setting below in the opmn.xml 
<process-set id="ASG" numprocs="1"> 
<module-data> <category id="start-parameters"> <data id="start-executable" value="C:\Oracle\product\10.1.3.1\OracleAS_1\jdk\bin\java"/> <data id="start-args" value="-classpath C:\abc\properties\"/> 
I appended my properties folder after all the jar files present in that tag. 
But its not loading any of my properties files. 
 
Can someone please help me out. 
 
Regards, 
 
Prashanth Babu.

No, the iPad does not support multiple user accounts or preferences.

WebCache Down (OAS 10g - 10.1.2.0.2)

Hello All,
Iam facing problems with starting WebCache on Windows 2003, here is what my event_log says :
[07/Jul/2011:18:25:59 +0300] [alert 13601] [ecid: -] Signal SIGSEGV caught
[07/Jul/2011:18:25:59 +0300] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[07/Jul/2011:18:25:59 +0300] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[07/Jul/2011:18:25:59 +0300] [alert 13305] [ecid: -] Failed to assign port 80: Address is already in use
[07/Jul/2011:18:25:59 +0300] [alert 9707] [ecid: -] Failed to start the server.
[07/Jul/2011:18:25:59 +0300] [alert 9609] [ecid: -] The server process could not initialize.
[07/Jul/2011:18:26:03 +0300] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[07/Jul/2011:18:26:03 +0300] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[07/Jul/2011:18:26:03 +0300] [alert 13305] [ecid: -] Failed to assign port 80: Address is already in use
[07/Jul/2011:18:26:03 +0300] [alert 9707] [ecid: -] Failed to start the server.
[07/Jul/2011:18:26:03 +0300] [alert 9609] [ecid: -] The server process could not initialize.
[07/Jul/2011:18:26:03 +0300] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[07/Jul/2011:18:26:03 +0300] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[07/Jul/2011:18:26:03 +0300] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file SYSTEM DEFAULT LOCATION (See Documentation)\ewallet.p12 does not exist.
[07/Jul/2011:18:26:03 +0300] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file SYSTEM DEFAULT LOCATION (See Documentation)\ewallet.der does not exist.
[07/Jul/2011:18:26:03 +0300] [warning 11919] [ecid: -] The SSL wallet autologin file SYSTEM DEFAULT LOCATION (See Documentation)\cwallet.sso does not exist. Wallet does not appear to be autologin wallet.
[07/Jul/2011:18:26:03 +0300] [warning 11921] [ecid: -] The origin server wallet did not open. Operating without wallet for backend. Only Diffie-Hellman anonymous connections supported to origin servers.
[07/Jul/2011:18:26:03 +0300] [warning 11922] [ecid: -] Origin Server Wallet wallet fails to open at location SYSTEM DEFAULT LOCATION (See Documentation), NZE-28759, as user SYSTEM
[07/Jul/2011:18:26:05 +0300] [alert 13601] [ecid: -] Signal SIGSEGV caught
[07/Jul/2011:18:26:05 +0300] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[07/Jul/2011:18:26:05 +0300] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[07/Jul/2011:18:26:05 +0300] [alert 13305] [ecid: -] Failed to assign port 80: Address is already in use
[07/Jul/2011:18:26:05 +0300] [alert 9707] [ecid: -] Failed to start the server.
[07/Jul/2011:18:26:05 +0300] [alert 9609] [ecid: -] The server process could not initialize.
I have performed following steps to overcome the problem :
This is what i have done on the first attempt :
1) replaced port 80 by 7777 in webcache.xml
2) added 'Listen 7777' in httpd.conf
3) restarted opmn
Following steps done on the second attempt :
1) replaced port 80 by 7779 in webcache.xml
2) added 'Listen 7779' in httpd.conf
3) restarted opmn
My webcache and webcacheadmin shows down in the opmnctl status.
Both above attempts were unsuccesful, Please support with a solution to above issue. We are on Windows 2003 R2, OAS 10g r2 (10.1.2.0.2). My webcache has been down for past 3 days and one thing i have noticed is that it is not writing any logs to $ORACLE_HOME\webcache\access_log. Access_log file was way too long when i checked 2 days ago so i moved the access log to a different location and re-created access_log by editing webcache.xml, i dont understand whether existing problem is due to port conflict or it is an issue with webcache unable to write to access_log. The current size of access_log is zero.
Look forward to your urgent support.
Thanks
Mir

Hello Fabian,
I have also got following from tracedump under $ORACLE_HOME\WEBCACHE\LOGS, Hope its not some critical issue relating to server hardware itself :
<Reason>
Caught EXCEPTION_ACCESS_VIOLATION
Faulting Instruction Address: 0x414ae4
Operation Type: read
Faulting Address: 0x65686351
</Reason>
<StackTrace>
<StackFrame Caller="_wxhtres_GrowSHSB_x+cb" Type="CALLrel" Callee="_wxmmFreeF+0" Arguments="65686361 51DC88 0 3E8 400 51DCB4"/>
<StackFrame Caller="_wxhtresInit+8e" Type="CALLrel" Callee="_wxhtres_GrowSHSB_x+0" Arguments="3E8 32DB18 51CFFC 50576C 0 23 40 51D000 B7E018 0 1FE8 2000 51D02C"/>
<StackFrame Caller="_InitInstance+f8" Type="CALLrel" Callee="_Shared_Init+0" Arguments=""/>
<StackFrame Caller="_StartMain+f1" Type="CALLrel" Callee="_InitInstance+0" Arguments="400000"/>
<StackFrame Caller="_WinMain@16+13" Type="CALLrel" Callee="_StartMain+0" Arguments="400000 0 1424AD A"/>
<StackFrame Caller="_WinMainCRTStartup+12f" Type="CALLrel" Callee="_WinMain@16+0" Arguments=""/>
<StackFrame Caller="77E6F238" Type="CALLreg" Callee="00000000" Arguments=""/>
</StackTrace>
<AddressDump>
Argument/Register addr=51dc88.
Dump of memory from 0x51DC48 to 0x51DD88
0051DC40 2065736E 416D654D 20726464 3022203D 22782578 00000A3E
0051DC60 523C7325 6F707365 2065736E 416D654D 20726464 4E22203D 5620746F 64696C61
0051DC80 0A3E2F22 00000000 2F3A7622 6361726F 632F656C 70796C61 732F6F73 682F6372
0051DCA0 2F707474 74687877 2E736572 343A2263 00323437 2F3A7622 6361726F 632F656C
0051DCC0 70796C61 732F6F73 682F6372 2F707474 74687877 2E736572 343A2263 00333337
0051DCE0 2F3A7622 6361726F 632F656C 70796C61 732F6F73 682F6372 2F707474 74687877
0051DD00 2E736572 343A2263 00383137 2F3A7622 6361726F 632F656C 70796C61 732F6F73
0051DD20 682F6372 2F707474 74687877 2E736572 343A2263 00353138 63616E69 69766974
0051DD40 742D7974 6F656D69 632D7475 696B6F6F 00000065 62616E65 0064656C 63616E69
0051DD60 69766974 742D7974 6F656D69 00007475 422E5055 73776F72 002F7265 756E694C
0051DD80 00000078 4F6E7553
Argument/Register addr=32db18.
Dump of memory from 0x32DAD8 to 0x32DC18
0032DAC0 00000000 00000000
0032DAE0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0032DB00 00B7E000 00BF4000 00B43E10 00000028 00000000 0051D000 61724F20 41656C63
0032DB20 65572D53 61432D62 2D656863 2F673031 312E3031 302E322E 0000322E 00000000
0032DB40 005E5990 00000030 00000000 00527CB8 6216F340 6216F3B0 00000000 00000000
0032DB60 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0032DB80 005E5990 00000030 00000000 00527CB8 00000002 00000005 00000005 0032DB50
0032DBA0 0100323C 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0032DBC0 005E5990 00000030 00000000 00514F00 4F5C3A43 746D6172 6265775C 68636163
0032DBE0 742E5C65 0000706D 00000000 00000000 00000000 00000000 00000000 00000000
0032DC00 00E80100 00C40100 011F0210 00000028 00000000 00525EB8
Argument/Register addr=51cffc.
Dump of memory from 0x51CFBC to 0x51D0FC
0051CFA0 6D616572
0051CFC0 00000000 74786574 6C6D782F 00000000 74786574 6D74682F 0000006C 2F494743
0051CFE0 00312E31 50545448 312E312F 00000000 70747468 0000002F 00000020 00732520
0051D000 2F3A7622 6361726F 632F656C 70796C61 732F6F73 682F6372 2F707474 74687877
0051D020 2E736572 333A2263 00003631 2F3A7622 6361726F 632F656C 70796C61 732F6F73
0051D040 682F6372 2F707474 74687877 2E736572 333A2263 00003930 2F3A7622 6361726F
0051D060 632F656C 70796C61 732F6F73 682F6372 2F707474 74687877 2E736572 333A2263
0051D080 00003035 2F3A7622 6361726F 632F656C 70796C61 732F6F73 682F6372 2F707474
0051D0A0 74687877 2E736572 343A2263 00003230 2F3A7622 6361726F 632F656C 70796C61
0051D0C0 732F6F73 682F6372 2F707474 74687877 2E736572 343A2263 00003932 2F3A7622
0051D0E0 6361726F 632F656C 70796C61 732F6F73 682F6372 2F707474 74687877
Argument/Register addr=50576c.
Dump of memory from 0x50572C to 0x50586C
00505720 39312029 202C3939 35303032 724F202C 656C6361
00505740 6C41202E 6972206C 73746867 73657220 65767265 00002E64 6361724F 572D656C
00505760 432D6265 65686361 00000000 6361724F 5341656C 6265572D 6361432D 312D6568
00505780 312F6730 2E312E30 2E302E32 00000032 6361724F 4120656C 696C7070 69746163
005057A0 53206E6F 65767265 00002F72 00000000 75626564 00000067 00000000 00000000
005057C0 00000000 63617274 00000065 00000000 00000000 00000000 69746F6E 61636966
005057E0 6E6F6974 00000000 00000000 6E726177 00676E69 00000000 00000000 00000000
00505800 6F727265 00000072 00000000 00000000 00000000 72656C61 00000074 00000000
00505820 00000000 00000000 65746E69 6C616E72 00000000 00000000 00000000 0000002D
00505840 255B7325 5B205D73 25207325 00205D64 255B7325 5B205D73 25207325 5B205D64
00505860 64696365 5D2D203A 00000020
Argument/Register addr=b7e018.
Dump of memory from 0xB7DFD8 to 0xB7E118
00B7DFC0 00000000 00000000
00B7DFE0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00B7E000 0116A200 0032DB00 00B43E10 00001FE8 00000000 0051D02C 63736E6F 6E65696C
00B7E020 6C642E74 00B4006C 00B44090 62BF7CC0 00B82010 62BF7CE0 00B82010 6090BE60
00B7E040 00B8202C 6090BEF0 00B8202C 6090BBB0 00B8202C 62BF7CE0 00B82010 00B7E0CC
00B7E060 2D465455 00003631 00000000 00000000 00000000 00000000 00000000 00000000
00B7E080 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Repeat 1 times
00B7E0C0 00000000 00000001 00000000 0000008C 0000028C 0000038C 00000000 00000000
00B7E0E0 00000000 00B44090 02020060 0000000C 004203E8 00010042 00000001 00000000
00B7E100 01B70000 00B901A0 00B90000 00000042 00030001 01010100
Argument/Register addr=400000.
Dump of memory from 0x3FFFC0 to 0x400100
003FFFC0 ******** ******** ******** ******** ******** ******** ******** ********
Repeat 1 times
00400000 00905A4D 00000003 00000004 0000FFFF 000000B8 00000000 00000040 00000000
00400020 00000000 00000000 00000000 00000000 00000000 00000000 00000000 000000E8
00400040 0EBA1F0E CD09B400 4C01B821 685421CD 70207369 72676F72 63206D61 6F6E6E61
00400060 65622074 6E757220 206E6920 20534F44 65646F6D 0A0D0D2E 00000024 00000000
00400080 1E4339BD 4D2D58F9 4D2D58F9 4D2D58F9 4D214482 4D2D58F3 4D23447A 4D2D58F1
004000A0 4D274796 4D2D58F2 4D294796 4D2D58FB 4D3E479B 4D2D58F7 4D2C58F9 4D2D5967
004000C0 4D277ECF 4D2D5948 4D297806 4D2D58E9 68636952 4D2D58F9 00000000 00000000
004000E0 00000000 00000000 00004550 0004014C 461D6E2B 00000000 00000000 030700E0
Argument/Register addr=1424ad.
Dump of memory from 0x14246D to 0x1425AD
00142460 00740072 00050003 00080174 00002ACB 00260D38
00142480 002616B8 00261B58 00030009 000C016B 5C3A4322 6D61724F 69625C74 65775C6E
001424A0 63616362 2E646568 22657865 412D2220 2D222022 4E4D504F 2D222022 22202255
001424C0 37303931 37303635 00223835 00000000 0009005E 00080160 001427C8 00142AE8
001424E0 00270000 0000000C 002AE986 00000000 00000000 00000000 00000000 00000000
00142500 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Repeat 4 times
001425A0 00000000 00000000 00000000 00000000
</AddressDump>
<DataStructure>
<bCalypsoAdminServer value = "1"/>
<CurrentFiber MemAddr = "0x0"/>
<Fibers MemAddr = "0x5d6248">
<Fiber MemAddr = "0x5d6248">
<IsBlocked value = "false"/>
<Operation_History value=""/>
<FiberFunctionStack>
<Function Mem_Addr = "0x5d62b8">
<Name value = "Unknown Function"/>
<nState value = "0"/>
<nAbortState value = "0"/>
State Dump Not Implemented
</Function>
</FiberFunctionStack>
<Start_Time_Seconds value = "0"/>
<Start_Time_Micro value = "0"/>
<pParams value = "0x0"/>
</Fiber>
<Fiber MemAddr = "0xc34818">
<IsBlocked value = "false"/>
<Operation_History value=""/>
<FiberFunctionStack>
<Function Mem_Addr = "0xc34888">
<Name value = "Unknown Function"/>
<nState value = "0"/>
<nAbortState value = "0"/>
State Dump Not Implemented
</Function>
</FiberFunctionStack>
<Start_Time_Seconds value = "0"/>
<Start_Time_Micro value = "0"/>
<pParams value = "0x0"/>
</Fiber>
</Fibers>
<_HTTPConfig MemAddr = "Not Valid"/>
<_HTTPState MemAddr = "Not Valid"/>
</DataStructure>
</TraceDump>
Thanks
Mir

How to add a java option in oas 10g 9.0.4?

I need add a java option in my oas 10g...
I have an application implemented with jdeveloper 10g (10.1.2) and its need to use other jdbc libraries acording:
http://radio.weblogs.com/0118231/stories/2005/05/27/workaroundForDeployingAdf1012AppUsingIntermediaDomainsToOracleAs904.html
Using EnterpriseManager, i add a java option for the OC4J instance where my ADF 10.1.2-based application will be deployed:
[b]-Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar
but now, ths oc4j instance dont init
...my opmn.xml file contains:
<process-type id="ADF_050615" module-id="OC4J">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true
 -Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
 />
<data id="oc4j-options" value="-properties"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true"/>
</category>
</module-data>
</process-type>
Help me please

Rigoberto, there should be no space between "-Xbootclasspath/p:" and the path "C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
By the way, one can always take a look at the logs at
 $ORACLE_HOME/opmn/logs
especially those files whose names start with OC4J~ if there is some wrong with oc4j processes. Those files are the default oc4j stout and sterr. If oc4j can not init, there should be some kind of error message in them.
By the way, the following line may be deleted since no property file is specified.
 <data id="oc4j-options" value="-properties"/>
Hope this helps.

OAS 10g R-2 10.1.2 Installation Query.

Similar Messages

Maybe you are looking for