OBI11g intallation issue - Error in validating the port range for auto port

I am using the intaller to install OBIEE 11g on my machine. When I get to step 6, I receive the error messages below. Currently I also have OBIEE 10g on my machine so the ports may be already used.
Does any one know how I can resolve this issue? I previously installed both 10g and 11g on my old laptop but I can't figure out why I'm getting these errors this time.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08010: Error in validating the port range for auto port allocation. At least 9 ports should be free within the range 9700-9999 for the BI System Components.
Ensure that a minimum of 9 ports are free within the range 9700-9999 for auto port allocation to work correctly for the BI System Components.

your hosts file have duplicate name that point to two different IP addresses.
10.37.29.1 test1.xyz.com
10.10.10.1 test1.xyz.com

Similar Messages

INST-08010: Error in validating the port range for auto port allocation

Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
My Operating System below:
Linux Red Hat 5.9 X86 64bit
My uname -a are below:
Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
My /etc/hosts file are below:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1   localhost.localdomain localhost
10.10.80.19 redhat59
My /etc/sysconfig/network are below:
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=redhat59
GATEWAY=10.174.27.228
My /etc/sysconfig/iptables are below:
# Generated by iptables-save v1.3.5 on Tue Dec 3 17:01:17 2013
*filter
:INPUT ACCEPT [425:33860]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [307:40164]
COMMIT
# Completed on Tue Dec 3 17:01:17 2013
My ifconfig are below:
eth0      Link encap:Ethernet HWaddr 52:54:00:55:9B:C9
          inet addr:10.174.27.233 Bcast:10.174.27.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:110668992 (105.5 MiB) TX bytes:209784134 (200.0 MiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:257845896 (245.9 MiB) TX bytes:257845896 (245.9 MiB)
my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.174.27.255
HWADDR=52:54:00:55:9B:C9
IPADDR=10.174.27.233
NETMASK=255.255.255.0
NETWORK=10.174.27.0
ONBOOT=yes
Have any suggestion please?
Many Thanks
D

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

[ERROR]:INST-08010: Error in validating the port range for auto port allocation

I am installing OBIEE 11.1.1.7.0 on a linux x86 version. I get the below error when running the installer: [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL. [VALIDATION] [SUGGESTION]:Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL. [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [ERROR]:INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). installation Failed. Exiting installation due to data validation failure. Solution suggested on other post is below: your hosts file have duplicate name that point to two different IP addresses. 10.37.29.1 test1.xyz.com 10.10.10.1 test1.xyz.com But in my case, My host file has different entiries as shown below: 169.36.71.228 usl20027808.am.hedani.net usl20027808 169.36.72.9 usl2002788.am.hedani.net usl2002788 Please suggest!

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.

Hi everyone,
I `m getting error message like this "Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.". when i try to debug the application with "Start Action"="Internet Explorer".This
application is an apps for office application with Oauth with Office 365
Any help in this regard is greatly appreciated
Thanks!!
Santosh Sutar

Thanks Fei for your time.
>>>I would suggest that you create a new project and set it start action with 'Internet Explorer'
to see whether this issue could be reproduced. If no, we can compare the difference between the two menifest files.
As per your suggestion above ,With new project,I can debug with with start action "Internet Explorer" and I
could not see much difference between the manifest files.
Please find below my manifest file for the reference .
<?xml version="1.0" encoding="UTF-8"?>

<OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="TaskPaneApp">
<Id>084cd6cd-2908-44d1-a5cf-4fa029aec211</Id>
<Version>1.0.0.0</Version>
<ProviderName>[Provider name]</ProviderName>
<DefaultLocale>en-US</DefaultLocale>
<DisplayName DefaultValue="Office 365 MVC" />
<Description DefaultValue="Office 365 MVC"/>
<AppDomains>
<AppDomain>https://login.microsoftonline.com</AppDomain>
</AppDomains>
<Hosts>
<Host Name="Document" />
<Host Name="Workbook" />
</Hosts>
<DefaultSettings>
<SourceLocation DefaultValue="~remoteAppUrl/Home/Index/" />
</DefaultSettings>
<Permissions>ReadWriteDocument</Permissions>
</OfficeApp>
Please suggest on this.
Thanks !!
Santosh Sutar

'Install App for SharePoint' There were errors when validating the App Package

Hello,
When testing with an app, I tried to add an
app event receiver before learning that remote event receiver are not allowed with
Sharepoint-hosted app. So I reseted the Handle app installed and
Web Project properties of my project and tried to redeploy and this error occurred :
'Install App for SharePoint' There were errors when validating the App Package
Something other than the project's properties have been modified but I don't know what.

I think the best way to figure real reason out is to look at ULS logs.
This is example, what I had:
Unexpected App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
exception: The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Error when determining the CTIADM_PROF profile for Agent 1010301

Hi,
here problem is while opening the cic win( Trn : CIC0 - Customer Interaction Center) it's throwing <b>error when determining the CTIADM_PROF profile for Agent 1010301</b>
pls. any ideas would be greatfull.
Thanks

Hi,
please check the following.
1. Make sure in the CIC profile (transaction CICo), a profile category
CTIADM_PROF is there and a valid profile is assigned.
Or, if no telephony should be used, make sure telephony and its com-
ponents are switched off on the CIC framework (transaction
CRMC_CIC_FW_MAINTAIN)
2. in the standard system, when you start your CIC, the framework is
taken from the highest org-unit and the components are taken from the
lowest level.
If you use more then one level of org-unit, please make sure that they
use the same framework to prevent the mentioned problems.
hopefully this helps!
Regards, Gerhard

Adobe Anchor Service CS4 Error 1612. The installation source for this product is not available.

Hi,
I've been trying to install CS4 Design Premium, except that I got this message:
Adobe Anchor Service CS4
Error:
Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
What is wrong and how do I fix it? I've installed this on my sister's laptop as well, but I've already uninstall it. Could this be the reason why?
Help appreciated, thanks!

Contact Adobe Technical Support for CS4 installation issues.
The problem has nothing to do with the fact that you already installed the same software on your "sister's laptop as well." And although you have already uninstalled it (and hopefully deactivated it as well), please remember that this software is licensed for a single user! You and your sister cannot somehow share the license.
- Dov

When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

What are the security risks for opening port 80 on workstations?

Hello all,
in our environment, there is an application which open port 80 on workstations when installed, but it is not allowed on preimeter FW
could you please advise what are the security risks for leaving port 80 opened on the workstations? or it is considered secure unless it is not allowed on the preimeter FW?
thanks alot & regards

Hi R.Naguib.
The 80 port is open by default through the firewall on Windows system, it is used by a http protocol by a browser.
As for the network or hardware Firewall settings, I suggest to turn to the network administrator for details.
Regards
Wade Liu
TechNet Community Support

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error when determining the CTIADM_PROF profile for agent xyz

Hi,
I have created the new cic frame work and assigned it to the position. when i run the TC - cic0, I am getting the following
"Error when determining the CTIADM_PROF profile for agent xyz"
Can you help me out ?
Thanks in advance

Hi Devi,
Problem is your IC winclient profile definition don't have any profile definition for CTIAMD_PROF assigned to it.
For this you can use standard profiles or may create your own CTI Component profile.
Follow IMG path:
Customer Relationship Managemet>Interaction Center WinClient>Component Configuration>Hidden Components>Configuration of CTI Component-->Define CTI Component Profile
Use this profile defintion to assign it to CTIAMD_PROF in you IC winclient profile definition.
Best Regards,
Pratik Patel
<b>Reward with POints!</b>

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

Error while determining the currency types for PO

Hi,
When running MR11 on PO4534356339 (account maintenance) the following error msg appears:
Error while determining the currency types for 4534356339 00030.
Message no.C+171
Check the configuration.
I have checked all currency settings and found ok. Material ledger is activated for this plant. It looks like there is problem in Item 30 of the Purchase order is having problem.
Best Regards,
MR

Hi,
Please refer this link :
MR11 error - Error while determining currency type - C+, 171!!!
Regards,
Pramitha.

OBI11g intallation issue - Error in validating the port range for auto port

Similar Messages

Maybe you are looking for