OBIEE 11G: Disable interaction in Graph

Hello,
Does anyone know how to disable interaction in graph in OBIEE 11G, apart from the normal way of disabling the interaction in Column Properties -> Interaction.
Is there any other way.
Thanks

In 11g unlike 10g the Interaction tab is disabled at graphs.
You can add it globally (column level)
thanks,
Saichand

Similar Messages

Text Box in Obiee 11g

Hi All,
How will I plot a text box in OBIEE 11g graphs.
Please help me.
SwathiP

Hi SwathiP,
I think that is not possible in obiee 11g, since obi renders graph as a flash object..
You can't create a text box over flash object unless the text box is created in the flash.
thanks,
Jprakash

Sectioned graphs output to PDF/print issue OBIEE 11G

I've created a series of graphs by placing the field that varies in the "Sections" area, so that each graph displays data for each unique item (in this case). When viewing in IE or Firefox, the graphs look perfect, each one accurately displaying the related data as they should. However, when I go to export or print the graphs to PDF or just print them, the sectioned identifiers change accordingly, but the graphs themselves are all the same.
For example, if I create a simple analysis for items 12345, 12346, and 12347 and their annual sales, create the resulting graph, then drop the item# into the Sections, I properly get three graphs, with each identified accurately with each different item number, but each of the graphs themselves are exactly the same, always with the data from the first item of the group.
Incidentally, the table/pivot tables (if using sections) do NOT reflect this behavior when exporting/printing. They display properly. It's only the graphs.
Has anyone experienced this before? Is it a bug? We are on OBIEE 11g 11.1.3.0/ IE 8 / Firefox 13.0.1/ Adobe Reader X 10.1.3.
Apologies if this has been covered before, but I could not find any related posts. Thank you in advance!

Hi, and thank you for your response. Yes, I've tried approaching it from many different directions, including what you're suggesting. It makes no difference how simple the analyses/graphs are, it results with duplicated graphs.
Could this be caused by something we may have wrong in the instanceconfig.xml or NQSConfig.INI?

"Graph Prompt" align center in OBIEE 11g

Hi All,
I have got a requirement to align the "Graph Prompt" center in OBIEE 11g (11.1.16.2 BP1). I could remove the boarder around the prompt using the following CSS.
<style>
.PTPageControl { border:0px; padding:0px; }
.PTPageEmbedded { border:0px;}
</style>
Can someone please let me know how to algin "graph prompt" center? Thanks in advance.

See http://msdn.microsoft.com/en-us/library/gg622942%28v=VS.85%29.aspx
Basically, IE9 breaks flash ExternalInterface calls if your flash component is embedded with an object tag with an embed tag fallback, and the object id and embed name is the same.
The easiest workaround is to tell ie9 to render your page in IE8 Standards mode. To do this, insert this in the element:
 <meta http-equiv="X-UA-Compatible" content="IE=8" >
Otherwise, you might just want to use the object tag only or embed tag only.

Graph Data Labels in OBIEE 11g - Customizing

Hi folks!
Would somebody know how to select what is shown in graph data labels in OBIEE 11g?
For example in a scatter graph data label I'd like to show the Group only (not the combination of Series, Group, X and Y, as by default). For a pie chart one can select the data shown in data labels to some extent (name / value), however couldn't find this option for scatter graph.
After searching I could only find instructions for 10g - such as John's instructions at http://obiee101.blogspot.com.es/2008/01/obiee-xy-and-data-in-mouse-over-label.html.
However, my understanding is that the graph engine in OBIEE 11g is now different, and the 10g instructions are not valid for 11g anymore.
I was also having a look on the .cxml files in OBIEE 11g but those seem to relate to colors only?
Any help appreciated, best regards,
Ilmari

hello,
i'm facing the same situation here,did you find a solution for your problem?

Default Colors Limit for Graph in OBIEE 11g

Hi, I'm using OBIEE 11g (11.1.1.6.6)
When I use a graph (either bar or pie), I notice that OBIEE only has 12 default colors to use in the graph. So it starts from blue, red, and so forth, until the 12th color, then for the 13th color it will use the same blue again, and so forth.
The problem is that my column values are more than 12 (it could be 20, it could be 30, etc). So, the repeating colors doesn't make any sense for the graphs.
Could somebody please advise me on how to increase the default number of default colors used by OBIEE (so that it will be like 50 default colors set automatically by OBIEE, just in case)?
Thanks so much!

Hi,
type HexaDecimal colors in google you will find n number of colors with the code number, just use this color codes by adding# before every code in the column format properties.
for ex: #ccc99
Follow this follwoing link
http://www.google.co.in/imgres?imgurl=http://howto.websitespot.com/images/hexadecimal-color-chart.gif&imgrefurl=http://howto.websitespot.com/hexadecimal-colors/&h=706&w=498&sz=63&tbnid=9_3i-3tIMDNffM:&tbnh=91&tbnw=64&prev=/search%3Fq%3Dhexadecimal%2Bcolors%26tbm%3Disch%26tbo%3Du&zoom=1&q=hexadecimal+colors&usg=__nWfHEFVvPfjMfZyq2MxXkhJ-288=&docid=FXj6mM0pc4RQTM&hl=en&sa=X&ei=FDxJUc2cDqS8iwKetICACQ&sqi=2&ved=0CEAQ9QEwBA&dur=280
Mark if Helpful/correct.
revert me for any queries
Thanks
Edited by: 934322 on Mar 19, 2013 9:38 PM

Regarding Time Series Graph in OBIEE 11g

Hi,
I need to create a time-series graph in OBIEE 11g. However, the value for time on the x-axis of the graph automatically comes for days.
Is there any way to change it to hours or minutes?
Thanks,
Naman Misra

Yes, it shud be a prob. Try using seperate tables for fact n timedim

OBIEE 11g - help formatting graphs / trellis displays

Hi, in OBIEE 11g I'm trying to display a simple trellis graph of win % for various baseball teams over a 10 year period. On the trellis - I would like to NOT show the vertical scale or horizontal scale. I.e. vertical currently showing 20%, 40%, etc. up to 100%, and horizontal showing 2001, 2002, etc.
Is there any way to turn off the scales on the various axis? I can turn off the "labels" so that it doesn't put the word "Year" under the horizontal axis, but I haven't been able to figure out how to actually turn off the year values.
This pretty much holds even on a "normal" non-trellis graph - I can't see how to turn off the axis values there either.
Thanks!
Scott

Dear Maqsood...
Assalam Alaikum,
I donno this question has been answered or not. if not please refer below. ( Obiee 11g)
Edit Graph properties - > Style Tab -> Grpah Data- Style and Conditional Formatting -> Conditional Formatting -> Add Conditional Formatting.
You can add Conditional Formatting similar to Column Properties.
Mark Correct if its answered.
Regards,
fiaz

Stacked bar graph requirement in OBIEE 11g

Hi,
I have stacked bar graph. I want to display units on the middle of each stack. I can display units, but by default these units are displayed on top of each stack. I checked properties of data markers, but I did not get any option to display data in the middle of stack.
I am using OBIEE 11g.
Is there any way to accomplish this?
Thanks.

We recently logged an Enhancement Request for the same with Oracle: Bug 15928667 : ENH DISPLAY DATA LABELS IN STACKED BAR CHART WITHIN THE BAR GRAPH ITSELF
There is no way out-of-box to do this as of right now.
Please assign points if helpful/correct.

Obiee 11g graph how to increase bar width

Hello,
obiee 11g: -> bar graph: how to increase bar width ?
Thank you,
Ark

Hi ,
Create your own bar code type rather than using system Bar Codes , if the length of your code doesn't fit with the standards available under SE73 . There you can define your own sizes as per your requirement , If you have a stands logic ,for example production order type Z001 should be in 15 lengthy code , then put a condition in the smart form to facilitate it , like wise you could use different lengthy bar codes in single form .
I hope this is what you meant by your treat.
Good Luck .
Cheers ,
Dilum

Bell Curve graph in OBIEE 11g

Can anyone know how to build a Bell curve report in OBIEE 11g.
Thanks in advance.
- Don.

Hi Don,
Try with standard deviation function,
http://gerardnico.com/wiki/dat/obiee/distribution
Regards,
Dpka

Login issue in OBIEE 11g

Hi Experts,
We are using OBIEE 11g
We are facing the strange issue while accessing the presentation services login page.
I had uploaded the RPD file using EM,it is working for 1 hour with out any issue.
After some time the fallowing error is coming. then we are not able to access presentation services,
I had observed all the services are down in EM>Capasity manage ment tab.
Longing screen is coming ,but after entering the credentials ,it is showing login into…but not at all opening the window.
Error connecting to the Oracle BI Server: Could not connect to the Oracle BI Server because it is not running or is inaccessible. Please contact your system administrator.
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred.
[nQSError: 12010] Communication error connecting to remote end point: address = SERVERNAME.com; port = 9706.
[nQSError: 12008] Unable to connect to port 9706 on machine SERVER_NAME.com.Please have your System Administrator look at the log for more details on this error. (HY000)
Thanks in advance.

Hi ,
I normally do this to fix this problem
1>Disable the network , keep the loopback adaptor enabled and then restart the services.
2> You can enable the network after services are restarted.
If you want a more practical solution and dont want to disable network again and again, then you would find the blog below useful.
http://www.rittmanmead.com/2012/08/obiee-fmw-and-networking-on-dhcp-hosts/
Hope this help.
Thanks,
Maqsood

Error while deploying RPD in OBIEE 11g (11.1.1.3)

Hi Friends,
At times while deploying RPD in OBIEE 11g, I am getting an error, "_*Supplementary information regarding operation: DOMAIN, UNEXPECTED_ERROR;/tmp/zipped-directory.zip (Permission denied)*_".
We have installed OBIEE over a LINUX machine. I tried to locate this file in the server but was not able to find any such thing. This error happens at random and I am unable to predict the occurrence of this error.
Can someone guide me how to resolve this issue?

You have to disable the central configuration:
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10541/disable_em.htm#BEIIAEGD
Change your repository in the file nqsconfig.ini
and
change the password if needed in the credential store ...
http://gerardnico.com/wiki/_detail/dat/obiee/obiee11g_credential_store.jpg?id=dat%3Aobiee%3Acredential
But if you can't open EM, it will be very difficult and may be you must have to add resource (memory, ...) to your server.
Regards,
-Amith.

Issue in Dashboard Prompt of OBIEE 11g

Hi,
I had recently migrated from OBIEE 10g to OBIEE 11g.
I had found that there are lot of things which were working on OBIEE 10g are not working in OBIEE 11g.
For Eg:
I have scenario where i have 2 dashboards with different dashboard prompts.
- *1st Dashboard*: I have prompt with 4 columns Year, Month, Qtr and Week. I can filter the data based on the selection of prompt.i.e Summary Report showing all KPIs and when clicked on the any of the KPI it goes to Below report which shows the graphical view of past weeks data.
- Report: Here i show all the week Ids in the Graph format and when clicked on the any week id it navigates to 2nd Dashboard(below) with appropriate week populated in the prompt and show the detailed records.
- *2nd Dashboard*: I have prompt with 5 columns Year, Month, Qtr, Week and Day of the Week with some detailed report. Here the only Week Id should be pre populated and show data based on the week id selection in the above report.
The issue here in OBIEE 11g is, The month Id which was selected in 1st Dashboard prompt is also getting pre populated into the 2nd dashboard prompt. Which should not happen.
Note: This was working fine in OBIEE 10g.
Is there any way to fix this issue in OBIEE 11g.
Regards
Shyam
Edited by: user9954342 on Dec 23, 2010 2:01 AM

Hi Bala,
Thank you for your response.
I had tried that and resolved my problem but it was impacting other reports i.e
I have other reports in 1st Dashboard with different tabs, Here i want the prompt value to be persisted across the reports in same dashboard so that when i go to other tab with in same dashboard the prompt value should be pre-populated and the data should be filtered against that.
Now if i change the scope to page then i will be loosing this functionality.
It was working on OBIEE 10g and i lost this after migrating to OBIEE 11g.
Can you please help me in this regard.
Regards
Shyam

Displaying of charts as a separate column in table view view in obiee 11g

Hi all,
we have a requiremnet where i need to display charts in a separate column in a table view in OBIEE 11g. can any body help in achieving this requirement?
Thanks in advance.
Regards

HI All,
Can any body let me know how to achieve this requirement!
charts also should be dsplayed in a column in table. I had gone through below Sparkline graph link but didn't move forward with Jquery. can any body help me in understanding this?
http://srisnotes.com/tag/obiee-11g/.

OBIEE 11G: Disable interaction in Graph

Similar Messages

Maybe you are looking for