OBIEE 11g - Usage Tracking - All details are not captured

Hi
We have implemented USAGE TRACKING in our RPD on OBIEE 11.1.1.5. It is working fine, only in few cases it is failing... failing to update with appropriate information...
For the field SUCCESS_FLG the value is populated as 3 - which means "The query failed due to some other reason" as per documentation. When checked the logs, there is no much information in that to conclude what went wrong. Log level is set to 3.
My question is, What are the possible reasons to have this success flag as 3? To capture all the details in the table S_NQ_ACCT, what need to be done? Any settings change?
Please share your thoughts...
Thanks,

Hi,
Good for you.
Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

Similar Messages

OBIEE 11g - Usage Tracking Not Working

Dear All,
I have enabled the usage Tracking in OBIEE 11g by using Setting up Usage Tracking in Oracle BI 11g guide.
Still i am getting the following error
Usage Tracking not started due to non-existent Usage Tracking table "12-Usage Tracking"."Usage Tracking Schema"."S_NQ_ACCT".
In my RPD,
Database Name : "12-Usage Tracking"
Physical Schema Name : "Usage Tracking Schema"
Physical Table Name : "S_NQ_ACCT"
This table reside under BIPLATFORM Schema in Oracle.
I have followed the steps mentioned in the Document, still unable to find why getting such error. Please point out if any mistake exists.
Please advice.

Hi,
Good for you.
Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

OBIEE 11G - Usage Tracking - Table S_NQ_DB_ACCT

Hi
I successfully set up usage tracking in Obiee 11 and the table S_NQ_ACCT gets a lot of new records. Basically it's working.
In the nqserver.log I get some errors concerning a new table S_NQ_DB_ACCT:
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute: INSERT INTO S_NQ_DB_ACCT (ID,LOGICAL_QUERY_ID,QUERY_TEXT,QUERY_BLOB,TIME_SEC,ROW_COUNT,START_TS,START_DT,START_HOUR_MIN,END_TS,END_DT,END_HOUR_MIN) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12).
This is an additional Usage Tracking Table which didn't exist in OBIEE 10G.
I configured the table as S_NQ_ACCT in the same place in the repositry/connection pool. Writing to this table should be possible.
Does anybody has an idea what could be wrong? Does another user fill data to this table than the user which fills data to S_NQ_ACCT?
Thank you

Hi
Thank you.
I use the table within the default RCU created schema. What I don't understand ist why the table S_NQ_ACCT gets a lot of records (because I set the loglevel) but S_NQ_DB_ACCT keeps empty with the error in the nqserver.log. I mean if one table works then the other should be working too? I checked also the permissions which are the same for both tables.
[2012-06-04T15:14:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 7d4f9e9d968c0bfe:-39c197c9:13773b9d89f:-8000-000000000005c768] [tid: 18e0] [nQSError: 17011] SQL statement execution failed. [[
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute: INSERT INTO S_NQ_DB_ACCT (ID,LOGICAL_QUERY_ID,QUERY_TEXT,QUERY_BLOB,TIME_SEC,ROW_COUNT,START_TS,START_DT,START_HOUR_MIN,END_TS,END_DT,END_HOUR_MIN) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12).
]]

OBIEE 11g Usage Tracking -

Hello,
I'm looking for a better way than Administration/ Manage Sessions to keep an eye on long-running queries.
Is there a way to get OBI to place information about currently running (started but not ended) queries into usage tracking so that I can see long-running reports though an analysis in the Usage Tracking subject area?
As far as I can see, I can only query completed reports/dashboards from the usage Tracking Subject area. The "status" column in the Manage Session display is not availalble in the Usage Tracking subject area and a filter on End Time = null yields no results. Any ideas/strategies welcome! Thanks.

You could use the nqquery.log to look for queries that have started but not finished. You'd need to parse it for relevant start/finish and match up the IDs.
There is an nqquery.log parser on MOS somewhere, that might be a good starting point.

OBIEE 11g Usage Tracking - Physical SQL

Hi All,
The Query Text column gives me only the logical SQL. The Log Level is set at 2. How can I get the physical SQL via Usage tracking?
Thanks for your time and help.

Hi,
Good for you.
Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

Excise Details are not capture in Excise invoice(J1IIN)

Hi,
I have created billing document where in account document I can clearly see BED , AED n SED but when I will create excise invoice in J1IIN with the reference of Billing doc. I can not see BED ,AED n SED capture in J1IIN, below errors are showing
Balance in transaction currency
1) Error
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 20.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
2) Error
System failure during locking GLaccount 1000 by 428481
Message no. 8I076
Searches on portal but didn't find out suitable solution...
Plse suggest
Edited by: KHAPREVIPIN on Nov 29, 2011 11:17 PM
Edited by: KHAPREVIPIN on Nov 29, 2011 11:36 PM

Hi,
I got resolved this problem yesterday...
I didn't maintain SD rounding in CIN company code setting ,I have generated excise invoice yesterday but Today i m creating same document for same plant n everything is same but i m facing same error........
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 30.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
System failure during locking GLaccount 1000 by 428481
Message no. 8I076

My Macbook displays photographies often quite dark, so that some details are not visible at all. Is it possible that the LED-light is defective or could there be other causes?

My Macbook displays photographies often very dark, so that some details are not visible at all. Can there be a problem with the LED light?

You could turn up the brightness of your display. It's also possible the backlighting has gone bad.

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

Excise Details are not maintanied for Vendor: GRN error

Dear All,
We have upgraded our Ecc 6.0 system to latest application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
Please let me know if any note or object to be updated to correct this error.
Thanks
Raghavendra.

hiii
Can u tel me where exactly the excise range was missing ??
Because if excise range is missing , it won't throw this lind of error .
U have found any other???????
Thnaks
SAP-MM

Ipad2 contact details are not displayed

Hi guys, since a few days I have got the following problem on my iPad 2, OS 5.01, sync with iCloud. The contacts are displayed in 2 pages layout, left the alphabetical list of contacts and (usually) on the right the details of the selected contact.
The alphabetical contact list is displayed but the details are not shown. The right side only shoes the options 1) new contact 2) add to contacts 3) send contact. A new contact 1) can be entered, the name is shown on the left, the details are not shown on the right. If I choose options 2) or 3) the contact folder is closed.
The contact details, however, must be available because the email app has access to the email addresses.
In order to solve the problem I tried the following
a) deleting all contacts and importing them again. Result: the problem remains
b) restoring the ipad from the last back up on my computer. Result: the problem remains
c) deleting all contacts, switching the ipad off and on again, entering a new contact. Result: the problem remains
I am also using the ipad 1 as well as the iphone with OS 5.01 both devices working as normal.
I do hope somebody can help, thanks.
Mike

could solve the problem by using iEA's suggestion:
I've been having this problem every since I updated to iOS 5. I called Apple and they told me to restore. That didn't work, I deleteted my icloud account, that didn't work, I switched contact off in icloud that didn't work.
I did a spotlight search for a contact, and it pulled up the contact info, then I touched the top left of the screen even though it was black, and went to the groups area. Then I clicked all, and they all magicly appeared with all fields in tact, wowowowo!! Hope this works for everyone

TDS deducted details are not printing in J1INQEFILE

Dear All,
For all the vendors TDS deducted details are not printing in J1INQEFILE. I would like to get the resolution by any of your valuable inputs.
Thanks,
Saravana

Hi ,
Kindly check this Note 1003736 - J1INQEFILE:Tax rate not appearing in the output.
Hope it helps
SJ

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

Tracks on compilations are not appearing on an artist's song list. Is there a setting which will change this?

Tracks from compilations are not appearing on an atist's song list. Is there a setting I can chnge to make them appear?

On the iPod turn off Settings > Main Menu > Compilations & Settings > Music Menu > Compilations.
See Grouping tracks into albums for further details.
tt2

ORA-01008 All variables are not bound

Hi I am running this query and getting this exception ORA-01008 All variables are not bound .
Could anyone please insight ?
SELECT EQMT_INGT_LOG_ID, EQMT_ID,
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML
FROM TOS_EQMT_INGT_LOG ingLog
where BUCK_SLIP_XML is not null and ingt_date between to_date(:fromDate, 'MM/DD/YYYY HH24:MI')
and to_date(:toDate,'MM/DD/YYYY HH24:MI' )
and eqmt_id in (select eqmt_id from tos_eqmt
where eqmt_init = :eqmtInit and eqmt_nbr = :eqmtNbr
and orig_loca_id in (select loca_id from tos_loca where altn_src_sys_stn_id = :circ7 ))
and SCAC = :scac
and STCC = :stcc
and SHPR_NAME = :shprName
and CNSE_NAME = :cnseName
and driv_id in (select driv_id from tos_driv where lcns = :lcns )
and driv_id in (select driv_id from tos_driv where sabv = :sabv )
and ingt_stat_ind = :ingtStatInd
and BUCK_SLIP_XML like :inspectedBy
ORDER BY INGT_DATE

Slightly off-topic but what do you think this does :
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML?

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

OBIEE 11g - Usage Tracking - All details are not captured

Similar Messages

Maybe you are looking for