Object class for object id 'ADRNR'
Hi all,
How can iget teh value of object class for object id 'ADRNR'. i tried to see teh contents in CDHDR but there are no entries in the dev and QA box either.
I need this value to pass to the CHANGEDOCUMENT_OPEN
and CHANGEDOCUMENT_CLOSe fm's.
Thanks
How can we find the correct object class id for a data element ?
Regards
Megha
Similar Messages
-
How to create object class for a z table
Hi All,
I have a z table and I want to register the changes of fields should be logged to CDHDR and CDPOS table.
Is this possible?
If yes how can I creat an object class for a z table. I have already checked the change document option in z data element.
Please help.
Regards,
Jeetu
Moderator message: standard functionality, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 6, 2010 6:16 PMTcode SCDO. You'll need to create a change document for you Z table and then use the FM created to record the changed data.
-
Object Class and Object Id for material Determination tables.
I want to know what is the Object Class and Object Id for material Determination records to verify tables CDHDR and CDPOS.
The purpose is to know the changes done by the different users for material determination records.
Can any one help.Hi ZZZSUNNY,
Similar question is answered recently.Please find the below link which will helps you
Material determination: how to see the creater of a record?
Thanks
Dasaradha -
Hi Experts,
Iam working on change pointers for the Material.
In BD52 transaction iam able to enter some fieds for the material.
But i need to enter Material Classication, and i found AUSP-ATWRT field.
Now, i want to pass this table & field into BD52 transaction. But it is asking Object Class for AUSP.
I know Object class for the table MARA ( is Material)
Could you please let me know how can i find Object Class for AUSP table?
Thanks
kakiAUSP - Characteristic values
-
LDAP object classes for user creation
Hello,
I use a remote LDAP for authentication, works fine. However, i want of copy some attributes from the remote LDAP into the dynamically created user profile. This works fine as long as the attributes are par5t of the standard object classes. The remote LDAP has an extra, site specific, object class for users. Since i want to use the same attribute names i added the schema extension (1 object class with a couple of attributes) to the AM LDAP. So far so good.
My question is: How do i specify the additional object class to be added to the user which is dynamicaly created?
Thanks in advance, RobertRobert,
To resolve this, I believe that you will need to add the new objectclass to the "LDAP User Object Classes" field on the LDAP Data Store. You will also need to add the attributes to "LDAP User Attributes" on the same tab.
Hope this helps. -
Translate Object class (for authorization objects)
I wonder where I can translate the objects class (SU21 - auth objects). I manages to find where I can translate the authorization objects in SE63.
What what is the object type for the objects class in order to translate it.SAP itself told me there is no way to do so. They recommend to directly edit the corresponding text table.
-
I'm trying to find the class for a given object. In Java, I
could do something like:
myObject.getClass().getName();
but I can't find the equivalent in Flex. How do I find the
class for a given Flex object? I don't know what it might be (other
than Object), so I don't want to do trial-and-error with "is" or
"instanceof."
Thanks!Object introspection can be done through the "describeType"
function. -
Needed object class for Reconciliation of OID groups?
Hi,
When I run OID Connector Gruop Lookup Reconciliation I only get the groups thath have the object class *'groupOfUniqueNames'*. All rest of groups are note reconcilied into the Lookup.OID.Group Lookup.
The problem is that I can´t modify all those groups that haven't this object class.
The groups that I can get actually have this object classes:
top
groupOfNames
it's possible to modify OID Connector Gruop Lookup Reconciliation to get all groups???
Tanks in advance.
regards.
Edited by: Daniel Cermeño on Sep 14, 2012 2:59 PM
Edited by: Daniel Cermeño on Sep 14, 2012 4:06 PMIts a matter of setting the right ldap filter in the scheduled task . Find out what is required to fetch all the groups from OID using ldap browser or something else .
And then simply use the same ldap filter in OID Group look up recon ST.
try with (objectclass=group)
Thanks
Suren -
New Object Types for Object Links
Need to create new Object type to object link Product hierarchy from ECC to RPM Item. Field is PRDHA.
Do we need to create new structure to have the Key linking PRDHA.
Any suggestions?Hi,
For this, you need to create Key, Proxy class and search field.
Logically if you use same Proxy class and key as that of PO then the system will search for PO number rather than PR.
I hope you are clear now.
Take help of an ABAPer
Niranjan
Let me know if it helps !!! -
Object key for object type WORKITEM is not generated
Hi experts,
I have a problem when I create a purchase requisition by workflow. This problem happens a client copy from production to quality system has been done.
The problem is that the object key for the object type WORKITEM is not generated. I check in transaction SWEL in quality system it displays the following data:
For the event data I have the following data:
Event Instance ID - 1099124
Object Type - BUS2105
Object key - 0120001588 (purchase requisition number)
Event - criadaoumodificada (createdorchanged)
For the Receiver Data I have the following data:
Receiver Type - WS99900003
Object Type (is not displayed)
Object Key (is empty)
Receiver FM - SWW_WI_CREATE_VIA_EVENT_IBF
RFC Destination - WORKFLOW_LOCAL_010
In the Receiver Data the object type is not displayed and the object key is not generated. In production system the object type is WORKITEM, and the object key is filled by a number of workitem.
Can anyone tell me why this happens?
Best regards,
LeonelHi Leonel,
as far as I remember, those fields are updated once the receiver function module was successfully processed. In your case, I'd suggest, that you ...
- Check the workflow local RFC destination (SM59, WORKFLOW_LOCAL_<client>)
- Check the workflow-user (SU01, User-ID WF-BATCH normally),
- Check for entries that stuck in the event processing (tRFC queue, transaction SM58).
- To verify the complete system, execute transaction SWU3. The section under "Runtime environment" should be marked green. (Ignore the red sign on definition environment).
- For a more extensive workflow runtime check, use the transaction SWUD (workflow diagnosis).
After all that, your problem might be solved, or at least you know, what's all okay
Best wishes,
Florin -
Syntax error for automatic generated class for object MAS_AUTH_CUST
Hi,
I am configuring the mobile sales scenario. I encountered a weird problem. Basically the automatically generated class ZDOECL_013_00H_MWSR can not be activated. If you activate it manually it will give you the below error. Looks like the entity structure is too big. So the generated code has a very big loop which causes the dump. I found the issue when try to run the function module CRM_AUTH_CUST_INSERTCDS as suggested in the configuration guide.
I have tried to regenerate the object. But it still give me the same error.
Internal error occured during runtime generation of Class ZDOECL_013_00H_MWSR (Dump ID: GEN_BRANCHOFFSET_LIMIT_REACHED)
Message no. OO053
Diagnosis
An internal error occurred when the system tried to generate the runtime objects of the class. A dump has been created with the given dump ID. It can be analyzed using transaction ST22.
Our Netweaver version as below. It should contain already the latest patch etc.
SAP_ABA 711 0006 SAPKA71106
SAP_BASIS 711 0006 SAPKB71106
PI_BASIS 711 0006 SAPK-71106INPIBASIS
ST-PI 2008_1_710 0004 SAPKITLRE4
SAP_BW 711 0006 SAPKW71106
CRMSPGWY 110 0004 SAPK-11004INCRMSPGWY
CRM version.
SAP_ABA 702 0006 SAPKA70206
SAP_BASIS 702 0006 SAPKB70206
PI_BASIS 702 0006 SAPK-70206INPIBASIS
ST-PI 2008_1_700 0002 SAPKITLRD2
SAP_BS_FND 702 0004 SAPK-70204INSAPBSFND
SAP_BW 702 0006 SAPKW70206
LCAPPS 2005_700 0009 SAPKIBHD09
SAP_AP 700 0022 SAPKNA7022
WEBCUIF 701 0003 SAPK-70103INWEBCUIF
BBPCRM 701 0003 SAPKU70103
WFMCORE 200 0016 SAPK-20016INWFMCORE
VIRSANH 530_700 0011 SAPK-53311INVIRSANH
Any advice is appreciated.
Thanks
Hansen ChenHi,
Gateway1.1 to SAP Netweaver mobile is not supported with EHP1 of SAP Netweaver Mobile 7.10.
Please check the release information note: 1539681
So, i suggest you to install SAP Netweaver Mobile 7.10 with Gateway addon.
Regards,
Siva. -
Class for object HR Employee ?
Hi,
can you tell me if in SAP there are a class which encapsulates an HR employee ? i sought but anything found.Hello Sougata
Below you see sample coding how to use the class and the interface:
*& Report ZUS_SDN_EMPLOYEE_CLASS
REPORT ZUS_SDN_EMPLOYEE_CLASS.
* CLASS lcl_myclass DEFINITION
CLASS lcl_myclass DEFINITION.
PUBLIC SECTION.
DATA: mo_empl TYPE REF TO cl_pt_employee read-only.
METHODS:
constructor
IMPORTING
value(id_pernr) TYPE pernr_d.
ENDCLASS. "lcl_myclass DEFINITION
* CLASS lcl_myclass IMPLEMENTATION
CLASS lcl_myclass IMPLEMENTATION.
METHOD constructor.
" NOTE: casting required because the method return interface type
me->mo_empl ?= cl_pt_employee=>get_employee( id_pernr ).
ENDMETHOD. "constructor
ENDCLASS. "lcl_myclass IMPLEMENTATION
DATA: gd_ename TYPE emnam,
go_myclass TYPE REF TO lcl_myclass,
gif_empl TYPE REF TO if_pt_employee.
PARAMETERS:
p_pernr TYPE pernr_d DEFAULT '1'.
START-OF-SELECTION.
CREATE OBJECT go_myclass
EXPORTING
id_pernr = p_pernr.
" NOTE: This method is defined in the class, not the interface
CALL METHOD go_myclass->mo_empl->get_master_data
EXPORTING
im_begda = '20080101'
im_endda = '99991231'
* IMPORTING
* EX_I0000 =
* EX_I0001 =
* EX_I0002 =
* EX_I0007 =
* EX_I0008 =
" Call interface method
gif_empl ?= go_myclass->mo_empl.
gd_ename = gif_empl->get_ename( ).
END-OF-SELECTION. -
Keynote 6.5 Loses Ability to Keep Master Slide Objects Static for Object Transitions
A gripe that I'm hoping many of you are as infuriated with as me – and hopefully maybe someone can point out something I am not seeing.
In past versions of Keynote 6:
Premise:
An object is placed on a Master Slide (not a placeholder)
That master is applied to slides.
An Object Transition (Cube, Revolve, Pop, Push, Flip, Zoom Perspective) is applied to that slide (which is followed by a slide with the same master)
Result:
Only objects not on the master slide would animate during the transition leading to a premium feeling transition.
Keynote 6.5
Premise:
Same as above
Result:
All objects animate, including non placeholder Master Slide objects resulting in "too much" happening on screen.
As a presentation designer who makes a living on Keynote, this is a huge step back. I used to trick Keynote 5.3 into getting the effect that I wanted by taking screenshots of a blank slide and then making that screen shot the background of a slide. It was a time suck, often somewhat pixelated, a huge addition to file size (especially for templating), and cumbersome to make small changes like adjusting position of logos.
Apple... I hope one of your engineers are reading this and creates a fix for this in the near future.A gripe that I'm hoping many of you are as infuriated with as me – and hopefully maybe someone can point out something I am not seeing.
In past versions of Keynote 6:
Premise:
An object is placed on a Master Slide (not a placeholder)
That master is applied to slides.
An Object Transition (Cube, Revolve, Pop, Push, Flip, Zoom Perspective) is applied to that slide (which is followed by a slide with the same master)
Result:
Only objects not on the master slide would animate during the transition leading to a premium feeling transition.
Keynote 6.5
Premise:
Same as above
Result:
All objects animate, including non placeholder Master Slide objects resulting in "too much" happening on screen.
As a presentation designer who makes a living on Keynote, this is a huge step back. I used to trick Keynote 5.3 into getting the effect that I wanted by taking screenshots of a blank slide and then making that screen shot the background of a slide. It was a time suck, often somewhat pixelated, a huge addition to file size (especially for templating), and cumbersome to make small changes like adjusting position of logos.
Apple... I hope one of your engineers are reading this and creates a fix for this in the near future. -
Object services for Object relational Mapping
Hello everyone,
The Object Services of ABAP Objects can create the corresponding Object Model from existing database tables. Is it either capable to carry out an Object relational mapping, just like Hibernate does forJava.
Thanks a lot.?
-
Hello,
Does anyone know the relationship between 'Object Class' and R/3 Document Types... My question is how one determines, for example, that VERKBELEG pertains to Sales Document Changes; and LIEFERUNG is for ... and so on...? Where in R/3 (or in Help Documentation)is this defined?
This relationship is helpful in searching thru the massive table CDHDR.
The table TCDOB <b>only</b> lists all of Object Classes.
Thanks in advance.
NavedHello Naved,
I do not think that the Object List will be linked to a document type. At best, we can expect to find the purpose of an Object Class, as intended (not "defined") by SAP.
If you go to the table TCDOBT (text table of TCDOB), you will find the descriptions of each of the change document classes, as given by SAP. For Example,
LIEFERUNG Delivery
LIBE Change document vendor evaluation
VERKBELEG Sales document
PRCTR Profit center master record
PRODCAT Product catalog
and so on.
Also, there's a Function Module that you might find to be useful - CDNAMES_GET.
If you want to find out the Object Class for a particular scenario, the best way that I can think of is to go to the table TCDOBT and search with the help of the OBTEXT field.
Hope this information was helpful. All the best.
Regards,
Anand Mandalika.
Maybe you are looking for
-
Uneven backlight is "normal" on retina MacBook Pro?
I bought my 13'' Haswell retina MacBook Pro days ago, I've experienced the unresponsive trackpad issue and I'm happy to see it's already resolved. But now I've encountered a new issue, and it's about the display. As the picture above shows, in low am
-
Does Acrobat X Standard have Post Script and Press Quality option, please?
Does Acrobat X Standard have Post Script and Press Quality option, please? Can anybody help please?
-
Hi, i want to delete all rows in a table which will be automaticlly updatet in a thread. the problem is that i get somtimes the message 9>=9 or 8>=3. did somebody know what that means ?!?
-
Panther 10.4.11 and active directory
Hello Mac friends, I am learning IT network as a trainee and in my training company, we are desperately trying to bind a powerbook using MAC OS 10.4.11 to the Active Directory's company. I have gathered some precious information on the subject. I kno
-
Error message for easy transfer says cannot access domain account?
After installing Windows 7 onto my current computer with XP, I get the error message about unable to access account domain when files try to transfer. My computer is connected to a LAN main server but even when I log on as the account administrator t