Object services in equipment master

Hello guys,
I am not getting the object services icon in my equipment master.
object services is used to attach documents.
where can i do the settings for it.

Hi,
Service Object can be seen in ie02
try it
regards
jitender suhag

Similar Messages

  • Mass upload of Object Services to material master - Create Document (URL)

    Hi there,
    Does anyone have any experience of uploading URL's to material masters via object services. Can we use LSMW?
    I have tried to record the transaction, however, this excludes the object services button
    Any feedback greatly appreciated
    Steve

    Hi Csabar,
    Thanks.
    BUt may I know clearly what do you mean by your following statement?
    I would suggest you should always create/modify/delete only one record in config via LSMW. 
    I have more than 3000 records for this exercise, do You mean I should test it out on one record first in 0VRF during the recording??
    thanks
    tuff

  • Generic Object Services (HR Master Overview Screen)

    Hi, i need to incorporate the Generic Object Services functionality to the HR Master Data linking it at three levels, namely,
    Scenarios
         1) GOS at Employee Level
         2) GOS at Employee-Infotype Level
         3) GOS at PD Object Level.
    I've managed to find the solution to Scenario's 1 and 3 while i'm still trying to incorporate scenario 2.
    Can someone let me know if there's any User-Exit that gets triggered at the Infotype Overview screen level from transaction PA30?
    I couldnt locate an exit that'd get triggered upon calling the overview screen in the HR Master Data transaction (PA30). So is the trouble.
    Helpful answers will be rewarded with points
    Cheers,
    Venkat

    Hi Venkat,
    Could you please share the steps on how you got the GOS at Employee Level to work?
    Thank you for your help.
    Aileen

  • Creation of Equipment master throught Emigall

    Hi Fritz,
    Good Day!
    I need to create a Emigall object for Equipment Master, which we can't
    handle in LSMW because of the volume of data, I am using the same object as
    used for Device of ISU.
    The object name is EQUIPMENT in company ZISU. I have used those fileds only
    which are required to create a equipmetn master in STW. While uploading the
    data I am getting an error " Enter a valid device category" which is a
    device category of ISU.
    Can we do this or do we need to create some other customization in this case
    Thanks for your support Fritz.
    Regards,
    Robert.

    Robert,
    I did some research. Please confirm you are referring to the data as copied below from the documentation.
    Kind regards,
    Fritz
    Definition
    Partners (business partners) are internal and/or external organizational units. For example, internal partners can be logistics and sales departments that perform services. External partners can be customers as service recipients and vendors as supporting service providers. A partner can be a natural or a legal entity. You can use partners in CS- and PM processing.
    The following partner types are delivered with the Standard System:
    Customer
    Contact person
    Vendor
    User
    Personnel number
    Organizational unit
    Position
    Partner Function
    You define partner functions in Customizing for Plant Maintenance and Customer Service. They are freely definable and always refer to a partner type. Standard functions exist (for example, goods recipient) and you can also define your own functions.
    Partner Determination Procedure
    The partner determination procedure is a grouping of partner functions. It specifies which partner functions are permitted or must always be specified for a particular business transaction (for example, for the processing of a service or maintenance order). In Customizing you define the partner determination procedure and assign partner functions to it. If functions are assigned to the partner determination procedure, you can assign the partner determination procedure to an object (for example, to a notification type).
    Integration
    You can assign partners to the following objects: Functional location and equipment

  • Create Attachments to Generic Object Services from Webdynpro appliccation

    Hi,
    I have requirement to Create Attachments  to Generic Object Services(GOS) in equipment master (IE03)  from webdynpro when a user clicks on upload button and also allow the user to delete the attachments .
    Can anyone advice me of any Function Modules or logic to use from Web GUI.
    I used below logic from R/3 to create attachments, but from webdynpro this method doesn't work.
    DATA lo_attachment TYPE REF TO cl_gos_document_service.
      CREATE OBJECT lo_attachment.
      CALL METHOD   lo_attachment->create_attachment
           EXPORTING  is_object = ls_object
           IMPORTING  ep_attachment = lp_attachment
    Your inputs are appreciated.
    Thanks
    Rajesh Yalda

    Hi,
    try using the Class CL_GOS_SRV_ATTACHMENT_CREATE with Method EXECUTE_ITS.
    best regards,
    Michael

  • Authorization to attach and delete the pdf docs in equipment master

    Dear team,
    1.In equipment master there is a provsion(service for object) to add or attaching documnet, my requiremnt is,
    is there a any provision to control the actvities specifically adding and deleting through authorization.
    2.and can we track through chnage logs of activities like adding deleting (when and who did the activities)
    i tried to check this in action log,change documents but i didn't find for specifically these functionality changes.
    Regards
    Ashok

    Refer note [491271|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=491271]

  • Remove s & d tab from equipment master

    HELLO
    In equipment master, from the below tab pages I want to deactivate the sales & distribution tab, how to do that?
    General, location organization, structure, sales & distribution etc
    THANKS
    nishj

    Hello,
    Below are the Path for SPRO
    Plant Maintenance and Customer Service>Master Data in Plant Maintenance and Customer Service>Technical Objects>Equipment>Equipment Categories-->Define Additional Business Views for Equipment Categories
    Then Select the Equipment Category for which you want deactivate the Sale and Distr. View and Uncheck  or Unmark the "S" Column Check box
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Sep 7, 2010 12:07 PM

  • Warranty Date field in the equipment master data

    Hi everyone!
    I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
    Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
    But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
    Thank you very much.

    Marlon,
      Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
    Regards
    Narasimhan

  • Attachement of drawings in equipment master.

    Hi PM experts,
    Through object service option as we do not have DMS, I am trying to attach drawings to equipment master through  BDC.I am able to record by t-code SHDB but while processing the recording . the "create attachement" step is not coming .So our ABAP er could prepare BDC.I have around 2000 equipment & for each equipment I need to attach drawings.Can anybody pl suggest how to upload the same.Thanks in advance,
    rgds
    rajib.

    Hi Celine,
    whether the uploaded file will affect system performance? How do we know where is the pic stored?
    Certainly there will be some effect on the system performace (still it depends on the hardware configuration) may not be right now, but may be in future as the attachements keeps on adding..
    And more over these files will not store in a proper manner in the SAP application server. These files mostly will be storing in SAP work location directory.  The major effect of this would, while taking back up of the SAP system these files may not be including in the back up process, which could be a serious concern.
    You can check with your BASIS guy for taking theback up of these files as in the case of RK log back up which is taken seperately after the SAP data back up.
    Better to analyse this with the help of your technical team before you proceed further with this functionality.
    Regards,
    Praveen.

  • Equipment Master Conversion

    Is there a BAPI or Function Module available to upload data into transaction IQ04(Equipment Master )...Could u please give me the name?
    Thanks,
    Anu

    Hi
    Check the below link for the Equipment related information.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/01/d551374ab311d189740000e8322d00/frameset.htm
    Follow the below mentioned path for the Equipment related configuration:
    SPRO>Plant Maintenance and customer service>Master Data in Plant maintenance and customer service>Technical Objects>Equipment
    Regards
    Bala

  • Equipment master record updation in Asset master record

    Dear Friends,
    I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
    But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
    Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
    Thanks,
    Dwarak.

    Hi,
    Thanks a lot for your reply.
    I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
    And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
    Thanks
    Dwarak.

  • How to get change documents for Equipment Master Records of a document?

    Hi experts,
    I need a report for changes of Equipment Master for a document.
    There is a way to reach this for every document : Environement - > Display Changes. Then I can get a report for "Changes to Object Links". But this can only show me that which equipments are linked to this document. What I want to search is which documents are linked to the equipment. I want to search with equipment number and get the history of changes for documents, Which documents are attached to this equipments and when did these documents attach to the equipment.
    Can I get this report with standard SAP queries / reports? Where can I get this informations? From which tables?
    PS: If i run a search with Equipment Master Data form CV04N, I can see which documents are linked to this equipment but I can't see when they are attached.
    Thanks in advance.

    .. but I can't see when they are attached...
    In CV04n,in Object Links tab,provide your search input criteria.Once the results are displayed,navigate to Current Layout button.Herein,move the 'Output Date' value to Displayed Column list.
    Once done,you should be able to view the date on which the DIR with associated objects(Eg: Equipment Master) was created.Hope this helps!!
    Regards,
    Pradeepkumar Haragoldavar

  • Automatic Creation of Equipment Master

    Hi Experts
    I have gone through lot of discussion available on forum but still Asset Equipment link is not working.
    I would like to create Equipment when I create Asset.
    I have done below settings.
    1) Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
    here i have assigned equipment category and object type and selected direct synchronization after saving in Create Equipment
    2) Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Assign Master Data Fields of Assets and Equipment
    here i have assigned fields here.
    When I create asset and save its only creating assets and even not getting error message . I have also checked screen layout and equipment is optional and not seems to be a problem.
    To see whether synchronization functionality works I have done settings from Equipment to Asset creation and it's working but that's not the requirement.
    I have changed the settings back to the 1) above to create equipment when asset is being created and it's not working.
    So to summaries when I create Asset - No equipment is created but if i change settings other way then asset is getting created from equipment.
    My question is what settings are missing to create Equipment when I create Assets?
    Is there any settings required from equipment side? any specific requirement on equipment category and object type?
    Thank you.

    Hi,
    Simple,
    1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
    2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
    3. Select tab page Allocations and click on position group on tab pages.
    4. Click on new entries and insert 'S0013', save.
    after doing this you will be able to find 'equipment' box under allocation.
    and regarding asset synchronization..
    Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
    In this step, under the box 'Edit Asset Master Record' mention,
    Create Equipment                 2 Direct Synchronization after saving
    Change Equipment               2 Direct Synchronization after saving
    Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
    After doing this you should be able to get equipment created automatically..
    Regards,
    Sayujya

  • Events available in Generic Object Services (GOS)?

    Hello everybody
    Searched around in SDN and also tried to find something useful in our system (SWO1) but can't find useful information on GOS events so I guess it probably doesn't exist?
    I'm searching a way to catch GOS events when someone adds, changes or deletes an attachment (URL) in the generic object services of an object, e.g. for a material master (BUS1001006). I'd like to create a change document for this and based on that to trigger some further processing for one of our interfaces.
    Anybody out there knowing how to achieve this?
    TIA and best regards,
    Renaud

    There's a couple of BaDIs with GOS names such as GOS_SRV_REQUEST that might help.  Otherwise I'd try using SE30 with lots of logging options set on to trace where you may be able to grab this info from.  GOS subscriptions may be another thing to look at.
    Jonathan

  • Tables for Documents&doc. type assigned to Equipment master

    Hi
    I need a table for Documents&d oc. type assigned to Equipment master .I have tried in ITOB, EQUI, DRAW. i could not find this
    Thanks
    Seenu

    hi
    yes you can use object key, it  is the one which relates with the equipment ( object key <b>EQUI</b>)
    regards
    thyagarajan

Maybe you are looking for