Object type error while creating ECR

Hi All
When creating a Engineering change request ECR (T.code: CC31), after entering the change type, selecting the object type(document & material) when i try to save the ECR, i am getting the following error message "is not a valid object type for a task". The error message didnt show in which object type the error is coming, its simply showing the above mentioned message. Could anybody help me in fixing the problem?.
Regards
S.Sivakumar

Hi,
To grant that allways the currenct screens and authorizations were
called please maintain also the value "1" into the "Authorization"
column. For further informations on this maintainance please see the
attached note 375452. It's important that you not enter the mentioned
screen number wihtout the leading "1" as this number is added
automatically by the system (e.g. object MARA 1201 maintain like MARA
201). You can do this in customizing under:
Transaction SPRO
> Cross-Application-Component
    > Document Management
         > Control Data
             > Define screen for object links
If you need the dynpro number or object you will find all standard SAP
objects and their screen number in function module CV130 (Screens) by
transaction SE80. Please maintain all necessary SAP objects.
Best regards,
Christoph

Similar Messages

Error while creating Attribute In BPM Object

Hi,
I am getting error while creating attributes in BPM Object.I am not able to open BPm object. while opening I am getting Below error.
Please suggest.
java.lang.StringIndexOutOfBoundsException: String index out of range: 28
     at java.lang.String.charAt(Unknown Source)
     at fuego.type.TypeFactory.createFromName(TypeFactory.java:482)
     at fuego.type.TypeFactory.forNameLazy(TypeFactory.java:263)
     at fuego.lang.CollectionTypeDescription.getIndexTypeRef(CollectionTypeDescription.java:146)
     at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:355)
     at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
     at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:344)
     at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
     at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:106)
     at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:94)
     at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:78)
     at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:612)
     at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:605)
     at fuego.ui.peer.swt.SwtTable$SwtTableModel.getColumnText(SwtTable.java:956)
     at org.eclipse.jface.viewers.TableColumnViewerLabelProvider.update(TableColumnViewerLabelProvider.java:70)
     at org.eclipse.jface.viewers.ViewerColumn.refresh(ViewerColumn.java:135)
     at org.eclipse.jface.viewers.AbstractTableViewer.doUpdateItem(AbstractTableViewer.java:386)
     at org.eclipse.jface.viewers.StructuredViewer$UpdateItemSafeRunnable.run(StructuredViewer.java:466)
     at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
     at org.eclipse.core.runtime.Platform.run(Platform.java:857)
     at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:46)
     at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:199)
     at org.eclipse.jface.viewers.StructuredViewer.updateItem(StructuredViewer.java:2026)
     at org.eclipse.jface.viewers.AbstractTableViewer.internalRefreshAll(AbstractTableViewer.java:695)
     at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:633)
     at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620)
     at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1433)
     at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1368)
     at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1330)
     at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1431)
     at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:536)
     at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1390)
     at fuego.ui.peer.swt.SwtViewer.repaint(SwtViewer.java:59)
     at fuego.ui.peer.swt.SwtColumn.setLabelProvider(SwtColumn.java:89)
     at fuego.ui.Column.setLabelProvider(Column.java:82)
     at fuego.designer.XObjectComponentStructurePanel.buildUI(XObjectComponentStructurePanel.java:299)
     at fuego.designer.AbstractEditor.build(AbstractEditor.java:542)
     at fuego.designer.AbstractEditor.init(AbstractEditor.java:133)
     at fuego.designer.XObjectComponentStructurePanel.<init>(XObjectComponentStructurePanel.java:126)
     at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.createStructurePage(BPMObjectMultipartEditor.java:581)
     at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.addDefaultPages(BPMObjectMultipartEditor.java:464)
     at fuego.eclipse.studio.multipageeditor.ExtendedMultiPageEditorPart.createPages(ExtendedMultiPageEditorPart.java:399)
     at fuego.eclipse.studio.multipageeditor.eclipse.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:253)
     at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
     at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:426)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:592)
     at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:299)
     at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:179)
     at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
     at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
     at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:400)
     at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)
     at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209)
     at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1604)
     at org.eclipse.ui.internal.PartStack.add(PartStack.java:499)
     at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103)
     at org.eclipse.ui.internal.PartStack.add(PartStack.java:485)
     at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112)
     at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63)
     at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:217)
     at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:207)
     at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:774)
     at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:673)
     at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:634)
     at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2737)
     at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2651)
     at org.eclipse.ui.internal.WorkbenchPage.access$13(WorkbenchPage.java:2643)
     at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2595)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2590)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2574)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2557)
     at fuego.eclipse.ui.DefaultEditor.open(DefaultEditor.java:65)
     at fuego.eclipse.studio.EclipseWorkbench.createEditorFromResource(EclipseWorkbench.java:529)
     at fuego.eclipse.studio.EclipseWorkbench.createEditor(EclipseWorkbench.java:297)
     at fuego.designer.action.OpenCatalogNodeAction.open(OpenCatalogNodeAction.java:91)
     at fuego.designer.action.OpenCatalogNodeAction.run(OpenCatalogNodeAction.java:55)
     at fuego.eclipse.ui.EclipseAction.run(EclipseAction.java:180)
     at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
     at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
     at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
     at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1173)

When you say you're having trouble "opening" the BPM Object, is it possible you instead mean you're having trouble expanding the BPM Object?
Just a guess, but if you're having trouble expanding the BPM Object I'd suspect that the object's xcdl contents might be corrupted. You might want to consider exporting and saving a backup of the project and then try deleting the object from the Project Navigator. Rebuild the BPM Object once you've deleted it.
Dan

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating "RETURNS" as ERP Sales transaction type

Description: We are getting error while creating ERP SLO type "Returns-ZRE". Message prompts as "Creation of ERP Transaction failed". We do not get the message for other order types for example "Standard order".
Please suggest. Please note that this is an ERP sales order in CRM UI not a CR< sales order.
Thanks
Shree

Is this only for a particular order type?
As stated above this can be to do with user authorisations or the trusted RFC set up. Some things to check are:
- ST22 dumps in ECC
- ST01 authorisation trace for the user in ECC
- Trusted RFC connection set up

Error while creating SC: Internal Error - termination type TH_RES_FREE

Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Error while creating the 'LOV' type parameter in Siebel 8.1.1.5

Hi,
One of my Customer is facing the below error while creatting the parameter of type 'LOV' in Parameter applet in Siebel 8.1.1.5
Runtime Error!
Program: C:\Program Files\Internet Explorer\iexplorer.exe
This application has requested the Runtime to terminate it in an usual way. Please contact the application’s support team for more information
Could some please let me know what would be the reason for this issue?
Thanks in advance for your help.
Thanks,
Ravi

Please close this thread...it appears that the error occurs when the report involves a big set of records. I tried trying to filter only one record and was able to produce the pdf

Error while creating Vacancy requisition object (NB) after upgrading EHP4

Hi All,
We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
Can any body help how to resolve this issue?
Thanks in advance.
Regards,
Sreelatha

Hi
Hope SAP Note 1241014 will be useful to you.
Best Regards
Reddy

Error while creating Temse Object (W2 form in PU19)

Team,
When i try to create the w2 in PU19, i am getting the error statingthat ERROR WHILE CREATING TEMSE OBJECT HRLUS01A100900109026.Please advise me in this.(We are maintaining the HRSP-42).It is veryurgent,Expecting your valuable Guidance.Points sure for the answers.
Regards
Priya.K

Hi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra.

Error while creating PDF object

We are using Adobe Interactive Forms with Guided Procedures. Netweaver 7.0 SP14 (Dual stack Java & Abap). All was working well it appears until we configured SSL for ADS - don't know for sure if this caused the problem but it is the only change we can identify around the time that our problems began.
When we attempt to Create an Impersonalized Form we receive the following error -
Cannot retrieve template structure: Execution ended in an unrecognized state
When we attempt to test a callable object associated with an interactive form we receive -
Error while creating PDF object: PDF object could not be created; object returned from ADS is null.
In both cases the entries in the default trace log are the same -
Service XMLFormService: Native process (PID=0) /usr/sap/UFD/DVEBMGS02/j2ee/os_libs/adssap/XMLFormService/bin/XMLForm.exe terminated abnormally with error code 134
PDF object could not be created; object returned from ADS is null
com.sap.caf.eu.gp.base.exception.EngineException: PDF object could not be created; object returned from ADS is null
at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.createInstanceDocument(AdobePDFAdapter.java:542)
at com.sap.caf.eu.gp.model.iforms.preproc.FormPreprocessor.execute(FormPreprocessor.java:507)
Like I mentioned earlier this functionality was working successfully in our environment at one time.
Any guidance in this matter would be greatly appreciated.
Thanks,
Joe

Joe,
If you originally configured ADS without SSL, I would recommend going back through the ADS Configuration Guide for your NetWeaver stack and make sure all the necessary changes for SSL were made. I've seen another case where a step was missed in SSL configuration for ADS which caused a form to error.
If everything looks good based on your SSL configuration, I would recommend creating an OSS Note.
-Matt

Error while creating an outbound idoc using idoc type delvry02

hi,
i getting the following error while creating an outbound idoc(outbound shipping notification) using message type " DESADV" and IDOC TYPE " DELVRY02"
ERROR:
" SPECIFY EITHER ADDRESS NO OR ADDRESS HANDLE"
MESSAGE NO: AM053
Help would be appreciated.
regards
leo

The message is kind of self-explanatory. It seems that some address (delivery address ?) is required but is missing from the IDoc. If it's a syntax error, then the segment with error will appear in red in WE05 transaction.
It is also possible that you have filled some field that you should have left blank and now SAP is trying to find an address based on that field.
Check your IDoc contents. It's really hard to tell from the distance since the requirements and configuration could be very different in different systems. Sometimes the OSS note search by message ID and number is also helpful.

Error While Creating Date type condition query

Hi All,
I am getting following error while creating a multiple condition query.
ERROR:java.lang.IllegalArgumentException: Unexpected field type for D: java.lang.String
I am pasting the scrap of the code for review below.
pls note after removing the condition cond6; it works fine, and cond6 is for date type field.
for(int j=1;j<7;j++){
fd[j] =trd.getFieldDescriptor(arrayHeaderFieldNames[j]);
BasisFieldType bft1 = fd[j].getFieldType();
if (bft1 == BasisFieldType.C) {
filterOperator[j] = RelationalOperatorType.CONTAINS; }
else{
filterOperator[j] = RelationalOperatorType.EQUALS;
order[j] =queryFactory.createSortOrder(fd[j],true);
cond1 =queryFactory.createCondition(fd[1], filterOperator[1], values[0]);
cond2 =queryFactory.createCondition(fd[2], filterOperator[2], values[1]);
cond3 =queryFactory.createCondition(fd[3], filterOperator[3], values[2]);
cond4 =queryFactory.createCondition(fd[4], filterOperator[4], values[3]);
cond5 =queryFactory.createCondition(fd[5], filterOperator[5], values[4]);
cond6 =queryFactory.createCondition(fd[6], filterOperator[6], values[5]);
Condition cond = queryFactory.createCondition(new Condition[]{cond1,cond2,cond3,cond4,cond5,cond6},LogicalOperatorType.AND);
Please Help!
Thanks n regards,
Kapoorchand.

Hi,
well that problem is a long time back -. I only have in mind that the date I had to transfer to the quesry was in a "strange" format. Have a lock into the documentation for the date field - your date field is not recognised as a date field from the quesry engine and so this fails - but unfortunately I have no idea at the moment how I fixed it last time - how I converted my date field......
Sorry, thast I can not give you the real point - but I will have a lock into the old code - hopefully I find it soon.
Regards,
Oliver

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Object type error while creating ECR

Similar Messages

Maybe you are looking for