Obsolete section in Talent Management Development Plan standard portal view

Hi all,
In Talent Management Development Plan standard portal view theres a section called "Obsolete" . In what conditions do development goals fall into that section?
Thanks for the help.

Dear Luke,
Thank you for your reply.
All those Services were activated already. I just checked once. All fine.
We dont have any issues with other templates. All are working fine.
But at the time of saving Development Template in Config Define Process Periods and Groupings,we got an error message as below
Process DEVP cannot be grouped
Message no. HRTMC_TM_ASSESSMENT051"
Despite the error message the Development template still got saved. Is this an issue ?
Below is the Config screen shot.
Appreciate your support.
Kind regards
Sathya

Similar Messages

  • Talent Assessment - Development Plan

    Hi Guys,
    We set up the wohle talent assessment, but we cannot see any "Create, change or display" link on the Development Plan tab.
    Any help?
    Regards
    Edited by: Henning van Wyk on Oct 21, 2009 8:34 AM

    >
    Ranjit Kumar wrote:
    > Hi,
    >
    > I have created development plan in Talent Management. But its showing error while consistency check that "You Do Not Have Authorization".
    >
    > I have 4 Talent Management roles assigned to this user id. So let me know where is the issue.
    >
    > Awaiting for valuable reply.
    > RK
    Hi Ranjit:
    Creating Development Plan templates in EHP4 should be done through the IMG step: Talent Management & Talent Development -> Talent Assessment -> Define Forms For Talent Assessment
    Once you create the form there and select "End Configuration" the appraisal template and it's subcomponents will automatically be set to "released" (HRP****-ISTAT = 4).  However, if you attempt to go into HRTMC_CATALOG_TMC, unrelease the template, modify it, then attempt to re-relase it, you will not be successful.
    The easiest answer would be.. create a new template using the IMG step I listed above.  If you don't like that, in a very indirect way, you can release the template again by updating the ISTAT field of the various V* objects you have created.  However, you're sure to have mixed results with this approach (I have lived this 1st hand).
    Further, if you attempt to modify the template directly in HRTMC_CATALOG_TMC, that is only one half of the process.  For instance, I wished to make the development plan printable.  Since it's the same basic technology as performance appraisals, it seemed completely logical.  There is a print layout option for the appraisal template, which for the development plan was blank.  I tried to set the value to something and then in my very indirect way, was able to release the template with the change in place.  Success (or so I thought)!  The frontend Web Dynpro functionality (and Flash Island) basically will not accomodate whatever modifications you've made. So basically, the Talent Assessment configuration is meant to be done through the IMG step above and that's prettymuch your only option.  Sorry I don't have better news.
    Let me know if you have any questions.
    Thanks,
    Chris
    Anyway

  • Talent Management & Succession Planning

    Hi
    As part of the EHP4 functional upgrade of HCM core processes for Talent Management such as Succession Planning or talent development is getting switched on.
    Any input on the impact it will have on existing BI reports on succession planning which is based on ehp3 data model.
    (The latest talent Management and talent development BI content is available only in the release of EHP5 package)
    Thanks & Regards
    Venkat

    Hi Dinu,
    It sounds like a data issue. SP is probably reading the HRP1001 values but somewhere the data may have been corrupted or an object incorrectly deleted/unassigned. I would just delete the relationship in PP01 if not actual successor is assigned.
    Kind regards,
    Luke

  • Talent Management-RePublishing Plans

    Hi Everybody,
    I'm unable to re-publish the plans in Talent Management, as it says that there are broken supervisor hiearchies which need to be fixed first. I ran a report and found three employees with broken hierarchies, all three employees are terminated, so I've excluded them from the system by adding them to the Eligibility Override EIT. Normally when I do that, it fixes the problem and I'm able to re-publish the plans. However, this time it hasn't worked and the employees in question are still appearing as having broken hierarchies. Can you please investigate and see if it is in fact these three employees causing the problem and if so, why the system is ignoring the fact that I've excluded them in the EIT. Any help would be appreciated. Thanks.

    I'm not technical, so can't comment on whether the SQL is correct. But, you can set objectives outside of the appraisal period, so your objectives might not yet be connected to a specific appraisal. Does your SQL allow for this?

  • Talent Management : To hide 'Obsolete' section

    Hi,
    We have a requirement in Talent Management.
    Requirement is : The obsolete section should be hidden in the Talent Mgmt development plan in the portal views but they should be viewable/accessible through R/3.
    Is it possible to implement these changes?

    Hi Pooja,
    You should be able to hide it in the Development Plan - it might require some changes to the WebDynpro. I'm not even sure if this is displayed in the backend anyway so there should be no problem there.
    Thanks,
    Luke

  • Development Plans

    Hi,
    When I tried to test the Development plan in TSM - SAP_SR_TMC_TMS_6 getting the below error, When I tested service HRTMC_TA_DEV_PLAN getting the same error.
    But when I tried in MSS Talent Assessment iView i am able to see employees under Development plan tab? But I do not get the Create button to
    create the Development plans. I have configured assessment forms in TM.
    It would be a really a great help if some can share their experiences on Development plan iView’s, we have the below iView’s for Dev plan
    do not understand how these are different ?
    TM- Talent Assessment- Development Plans.
    TM- Development Plans.
        500 SAP Internal Server Error
    error: Invalid parameter combination PLVAR/OTYPE/OBJID (termination: RABAX_STATE)
    Thanks
    Kumar

    Hi Luke,
    I have assigned SAP_MANAGER_MSS_SR_NWBC_3 role to manager and able to get the development plans and the change button is  working (only header data is getting displayed).
    I have also assigned SAP_SR_TMC_MANAGER_6 but when i tried to open the Talent Assessment  in NWBC getting the error "  The user menu tree for user xxxx with role SAP_SR_TMC_MANAGER_6 is empty. Please contact your system administrator"  but i am able to open the development plans in PFCG using the SAP_SR_TMC_MANAGER role but  the change button is not working.
    Please let me know if i have missed any settings.
    Thanks
    Kumar

  • Development Plans functionality in Talent Management

    Hello,
    We are planning to use the Development Plans functionality in Talent Management.
    But the Development Plan is not opening from MSS. (MSS -> Talent management -> Assessment -> Development Plan).
    I had created the Business partner object for all my test PERNRs and I had created a Development Plan Template (via IMG step in Talent management). I had activated the Business Functions and Services.
    When I open the Development plan in MSS, it is showing the names of employees (i.e. the reports of the manager). But when I click on an employee, it's not opening any development plan. Nothing is happening.
    Please help me,
    Thanks
    Raghu

    Hi Bharti,
    You must first delete the template names from the customizing tables where it is stored (under Talent Assessment node of Talent Management and Talent Development). Then you delete it under PHAP_CATALOG. Unfortunately you have created an databse inconsistency and you might need to see if Basis can delete the values from the table.
    Best regards,
    Luke

  • Development Plan Configuration details for Talent Management

    Hi Gurus,
    I need to know the configuration nodes used for Development Plans in Talent management.I created the development form in Talent Assessment -->Define Forms for Talent Assessment. & assigned a scale to it.
    Now when I log in with the TMS id in portal & create a development form for one of the employees, I can see certain links & fields like : Add Action (link), when i click on Add action a screen pops up & asks for Action Type & Action Status.
    Firstly i need to know where does these values get fetched from.
    Secondly when i click on Add Action button, ideally it should give me 2 options :1. Add actions that can be freely defined and 2. Add training,but currently it just opens a window to create a new action.So how to control the same.
    Regards
    Bharti

    Hi,
    I know this is a (very) old post but my answer might help someone anyway.
    1. Actually, the dropw-down lists are filled from the table T77TMC_SCA_MAP, status is mapped with scale 8 and type is mapped is scale 9.
    Customizing of this table can be reached trough transaction S_EH4_55000247.
    2. The option is only shown when LSO integration is active.
    Hope it helps.
    Best regards,
    Guillaume

  • Need help  Development Planning : Part of Talent Management

    Hi All,
    I need to turn on new functionality for Development Planning (part of Talent Management), I looked online for material..I did find some but none of them explains configuration steps.
    Can someone guide me on the same.
    Regards,
    Shweta

    hi
    can u explain what exactly are you trying to do ,?
    which enhancement pack you currently are on?
    Regards
    sameer

  • Development plan by Employee - Talent Management

    Dear Luke,
    Greetings.
    From one of your blog understand very clearly that Development plans are only accessible by TMS and Manager. And not by Employee. But this could be well accepted when the it comes to larger organization.
    In the event of small or mid size kind of organization one of the main requirement is that they want the Employee to view the development plan set for them. Because these Development plans are not only for the purpose of Succession planning rather to address the gap in Position vs Person related competency.
    Would be extremely helpful if can share a solution pertaining to getting the Development Plan in Talent Management viewable by Employees.
    Would appreciate your inputs.
    Kind regards
    Sathya

    Hi Sathya,
    By default this is not possible, but I know that Chris McNarney has done this before. It is quite complex to code from what I remember because it involves generating the MEM_ID.
    Best regards,
    Luke

  • Issue in creating dev plan in talent management specialist role

    Hi ,
    I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
    Tarun

    Hi Luke ,
    According to one of your article , I run  HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
    The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
    Qualification 90007487 does not exist
    The incorrect HR object has the key 01NA90011026
    The incorrect infotype record is 40601NA900110265105    1  1900010199991231
    The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
    Serious error; see log
    The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
    Serious error; see log
    The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
    Qualification 90007487 does not exist
    The incorrect HR object has the key 01NA90011026
    The incorrect infotype record is 40601NA900110265105    1  1900010199991231
    The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
    Serious error; see log
    The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
    Thanks
    Tarun

  • Obsolete in Development Plan

    Dear Luke,
    Greetings.
    We are on ECC 6, Eph4.
    We configured Development Plan starting from Define Forms for Talent Assessment to Define Process Periods and Groupings. But while executing Talent Information by TMS in Portal encountring the below error. " Obsolete" in Developmental plan. Totally puzzled abt the error.
    Would be great if you can share in your inputs.
    Step 1:
    Step 2:
    While configuring "Development Plan" we performed the following steps
    Config step 1:
    Config step 2:
    Config Step 3:
    Kind regards
    Sathya

    Dear Luke,
    Thank you for your reply.
    All those Services were activated already. I just checked once. All fine.
    We dont have any issues with other templates. All are working fine.
    But at the time of saving Development Template in Config Define Process Periods and Groupings,we got an error message as below
    Process DEVP cannot be grouped
    Message no. HRTMC_TM_ASSESSMENT051"
    Despite the error message the Development template still got saved. Is this an issue ?
    Below is the Config screen shot.
    Appreciate your support.
    Kind regards
    Sathya

  • Personnel Development or Talent Management

    Hi Experts,
    When we talk of Personnel Development in EHp 6.0 does it refer to Talent management as qualifications, appraisals also available in Talent management.
    Does it mean that PD is nomore a separate submodule & if we go with Talent Managemnt then we have have the employee devlopment also.
    So no need of going with PD , Dev activity can be achieved through Talent,is it so?
    Please guide.

    Hi Martin,
    Thanks you very much for the assistance.
    The client wants employee development:
    Short Term & Long Term Dev Plan for Employees.
    Track & Monitor the progress of employee.
    Profile Matchup against positions to determine skills & knowledge of the employee.
    Training plans to adress the individual dev needs.
    These are few of the needs, but i dont think we have all these available in Talent.
    Please guide.

  • BAPI to Upload talent Group in HR Talent management and talent development

    Hello all,
      I am trying to create some talent group (in Talent management and talent development module) directly using ECC6 but not able to do the same. is there any bapi which we can use to mass upload of talent groups.
    I tried to put data directly yo infotype 7420 but its not the right way of doing the same.
    Mandeep

    not solved yet.

  • How to Delete Development & Potential Form in Talent Management

    Hi Guruz,
    Please let me know the correct method to delete forms (Development & potential )forms in Talent assessment .
    We deleted the forms via PHAP_CATALOG, but they are still visible in Define Forms for Talent Assessment under Talent Assessment, & the system is not allowing to delete it from this node as it gives the below mentioned error:
    Appraisal Template was not deleted:
    Message no. HRHAP00_TEMPLATE010
    Diagnosis
    The system may have canceled the deletion for one of the following reasons:
    The system cannot delete the element, for example if it is a category group.
    The business check found errors.
    The element is already released or in history.
    The system could not delete the entire structure (one of the above- mentioned reasons could be the cause).
    Please let me know what & how to get rid of this problem.
    Regards
    Bharti Sood

    Hi Bharti,
    You must first delete the template names from the customizing tables where it is stored (under Talent Assessment node of Talent Management and Talent Development). Then you delete it under PHAP_CATALOG. Unfortunately you have created an databse inconsistency and you might need to see if Basis can delete the values from the table.
    Best regards,
    Luke

Maybe you are looking for

  • Applet / SQL Database communication

    I am developing an applet that needs to connect to a SQL Database to keep track of a variety of information. I am running into some errors when I try to connect to the database. Can anyone tell me the best way for an applet to connect to a SQL databa

  • HT201287 iMessage is not sent as SMS

    My Wife and I are both using iMessages. But in last days, when she is out and has no Internet connection, she is not recieving my iMessage ans regular SMS. On my phone it is marked as delivered iMessage, but she gets nothing. What can be the issue? T

  • OS X LION and Time Capsule

    I have a 2TB Time Capsule (wi-fi), and cannot use it with OS X Lion!  It says the airport utility is not compatible with my operating system.  What do I do now?  Is there a solution to this issue?

  • HT1688 im getting an unknown error  (-54) in my itunes

    im getting an unknown error  (-54) in my itunes

  • Linking a custom object to an activity and importing records

    I'm trying to create a link between an activity record and a custom object record. In essence, we will have 1 activity record with multiple associated custom object records linked to it. How do I import these multiple records to a specific activity r