Oci_fetch_array - Uppercase associative indices

Hi All,
Is there any way to change the Upper case into lower case with out using any string operations like (strtolower and etc....)?

The alternative is to create the tables with case sensitive identifiers.
Code wise, I'd prefer not to add any PHP OCI8 php.ini options to force array indices to be lower-case but I would fairly review any patch submissions. An option would make current applications less portable, since they might be run in environments where the php.ini setting is not what they expect. New applications would be forced to set the value.

Similar Messages

Cube's size report

Hi all,
Because of performance issue I want to collapse some cubes in my BW system.
I want to know if there is any report that can show me a list of all cubes and size/usage of these cubes.
Thanks in advanced.
Miki,
SAP Basis

As other have mentioned, DB02, will provide database storage allocations for each table and index, you'll just need to wild card the InfoCube Name to get the E and F fact tables, D dimension tables, ans all the associated indices. You would have to get the aggregates as a separate piece.
Maybe you don't care about storage, but are looking for row counts. If that is the case RSRV has a test you can run- Under All Elementary Tests / Database is a test called Database Information about InfoProvider Tables. It provides the following:
Database information about InfoProvider 0BWTC_C02 tables
0BWTC_C02 is a BasisInfoCube
Cube 0BWTC_C02 has 6 dimensions; 2 dimensions are line item dimensions
Table /BI0/D0BWTC_C021 has 55184 entries. Size corresponds to 48% of the InfoCube
Table /BI0/D0BWTC_C024 has 160580 entries. Size corresponds to 140% of the InfoCube
Table /BI0/D0BWTC_C02P has 58 entries. Size corresponds to 0% of the InfoCube
Table /BI0/D0BWTC_C02T has 963 entries. Size corresponds to 1% of the InfoCube
Table /BI0/E0BWTC_C02 has 102791 entries. Size corresponds to 89% of the InfoCube
Table /BI0/F0BWTC_C02 has 12275 entries. Size corresponds to 11% of the InfoCube
Keep in mind this info is based on the database statistics, so if they are stale for some reason, your row counts will be off.
As for usage, the BW Statistics business content queries can identify that, although for what you are looking for it might be easier to use ST03N in Expert Mode. It provides access to the last couple of months of the same data, summarized at InfoProvider and Query levels.
Also your DBA should be able to get you this info from DBA_TABLES (Oracle environment)
TABLE_NAME        NUM_ROWS    BLOCKS
/BI0/ABBP_CON00   8864658     379455
/BI0/ABBP_CON40   17630       832
/BI0/ABBP_CON50   0           1
/BI0/ABBP_DS100   2947678     152065
/BI0/ABBP_DS140   1723        76
/BI0/ABBP_DS150   0           1
/BI0/ABBP_INV00   3040014     141501
/BI0/ABBP_INV40   5400        280
/BI0/ABBP_INV50   0           1
Where blocksize is site specific, although typically 8K.

I have two iTunes accounts. When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad. Ian trying to link it to the other account instead

I have two iTunes accounts. When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead

johnfromnorth andover wrote:
I have two iTunes accounts
Why?
When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
You want to uise the newer account with the iPad?
Settings > Store.
Tap account, sign out then sign in with the account you want.

Problem with Finder and Menu Fonts (uppercase A)

Hello --
I'm having a problem with fonts. All the characters that appear under icons in the Finder or in the menu for any application appear as uppercase As with boxes around them. There appears to be one uppercase A for each character that should be there. If I click-pause-click to edit the filename in the Finder, the text appears normal during the duration of the change, and then reverts to uppercase A with a box around it again. All other operation of the computer is normal.
I was watching and downloading video files in iTunes when the problem appeared. When I pressed ESC to exit full-screen mode, the Finder said that my start-up disk was almost full, and I saw the font problem. Upon investigating, I discovered that my start-up disk was completely full (and the download had failed), so the first thing I did was move some video files to an external drive, which freed about 5 GB.
Since freeing the space, I've tried the following to fix it, in this order:
1. booted from Tiger CD to run Repair Disk from Disk Utility
2. rebooted from the boot hard drive to run Repair Disk Permissions from Disk Utility
3. run through Disk Warrior
4. created a test admin user and logged in as that user
5. removed font cache files using terminal
6. booted in safe mode, logged in as myself, and then rebooted normally
None of these actions has had any effect. The computer is still operating normally, except for the characters that don't display correctly.
I'm running 10.4.6 on a Titanium Powerbook 500 MHz with 512MB RAM. A few months ago, I replaced the internal hard drive with an 80GB Seagate.
Tibook 500 Mac OS X (10.4.6)

Hi again, zoobieboots —
I appreciate your initiating a new thread. Your post here helps to make the situation much clearer than in bmewolf's thread — particularly in terms of what you've already tried. Thanks again.
A few initial thoughts —
(a) As I was trying to suggest previously, you're apparently operating (after moving some files to an external drive) with ~6-10% (?) free disk space. Particularly given that you were working with large video files when this appeared, File fragmentation would be expected. While I haven't heard of this particular symptom resulting from fragmentation, that would be a concern to me — particularly since this immediately preceded the problematic behavior.
I've read some good reports about iDefrag, but haven't used it myself. A demo version is apparently available for HDs < 100GB. But you'd presumably need to free significantly more space first (you haven't actually said whether 5GB or ?? is the total available now). Having never experienced severe fragmentation, I don't fully understand its consequences — but another participant may be able to explain this.
<b>(b) You don't mention trying to troubleshoot potentially corrupt or incompatible fonts (or font caches), also as outlined in the other thread. As I suggested there, The X Lab's "undoing Font Book" FAQ is a useful resource in this.
(c) Although I agree it may be an unsatisfying "solution," an Archive & Install did work for bmewolf in the case that you've indicated matches yours closely.
I hope one of these suggestions is helpful. Please post back to discuss your progress.
Regards,
Dean

Safari doesn't download files, it instead tries to open the url associated with the file.

As stated in the title, when I try to download a file from the internet, clicking on the link associated to the file will not start a download, but instead opens a new tab in my browser showing the url of the associated file. If I then right-click and choose 'Download linked file as...' the file can be downloaded with no issues in most of the cases, at least as long as the website allows right-click downloads to happen.
Does anybody know why this could be? I have tried resetting Safari, emptying the cache and, of course, updating my software. It is a midly annoying problem, but it doesn't happen when I use other web browsers in my iMac. Any help would be appreciated. I'm using Lion in a late 2009 iMac with, as I said, updated software.
Thanks!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

How do i delete the primary email address associated with my apple id?

My husband deleted the Outlook email account that was associated with my Apple ID as the primary email. I have two alternate emails also associated with the same Apple ID. How can I delete the old, Outlook email and use one of the alternates as a primary? I have tried to do this under "manage my account," but there is no option to delte the primary and select one of the alternates in its place.
I also cannot receive confirmation emails from Apple at the old, primary email address because it has been terminated. Other Apple help posts indicated this could be a problem, as I need that old account to receive emails pertaining to a switch.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.

Pre purchase download ... won't. States "This computer is already associated with an Apple ID.

I prepurchased a movie in iTunes and after waiting several months got an email indicating that I could now download and enjoy the movie. So I was able to download the iTunes extras, but as for the movie itself, I am getting an annoying message stating "This computer is already associated with an Apple ID. You can download past purchases on this computer with just one Apple ID every 90 days. this computer can be used with a different Apple ID in 33 days."
Huh? What ID other than my own does it think is associated with this purchase, and where is the setting for this "association" found. This is pretty infuriating after the wait!
Appreciate the help!
Kbt

Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716)

How do I change the bank associated with receiving my ebill?

I'm trying to setup my bank account to receive ebills from Verizon, but whenever I try I receive the following message, "This account number is already active for e-bills. E-bills can only be associated with one user name." I've looked all over my account but cannot find where to change this information.

JLoope Let's figure out how to update your banking information for ebilling. Since the message is indicating that you already have an account active for ebills, is there a section where you delete the current information?
SheritaH_VZW
Follow us on Twitter
@VZWSupport

How can I change the iCloud account associated with my iphone

I changed my e-mail address a few months ago including changing my Apple ID to reflect my new e-mail. For some reason, my iphone and my ipad are both stuck with the iCloud username of my old e-mail address. When I try to delete these accounts like other forums have indicated to do, it won't let me because every password possible comes up as invalid and the "forgot password" e-mail never comes. I was wondering if there was a way to delete the icloud account associated with my old e-mail without having a password and replacing it with the updated iCloud information.

if for some reason your old iCloud account does not accpte or you do not remember your password, you can try this:
Problems after changing Apple ID primary mail address

OSPFv3 issue on a subif associated with a VRF

Hi,
I am trying to virtualize router and physical interface to test daul stack topology. This is one of my test 1841 routers which is failing enable OSPFv3 on a subif associated with a vrf while ospfv2 works fine with IPv4
interface FastEthernet0/1.59
encapsulation dot1Q 59
vrf forwarding TEST
ip address 172.18.58.18 255.255.255.240
ip ospf cost 200
ipv6 address 2001:DB8:BABE:59::2/64
end
Router(config)#int f0/1.59
Router(config-subif)#ipv
Router(config-subif)#ipv6 os
Router(config-subif)#ipv6 ospf 1 ar 0
% OSPFv3: not supported on VRF interface
Router(config-subif)#do sh ver
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Mon 26-Sep-11 15:48 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
Router uptime is 9 minutes
System returned to ROM by reload at 04:11:11 UTC Tue Nov 15 2011
System image file is "flash:c1841-adventerprisek9-mz.151-4.M2.bin"
Last reload type: Normal Reload
===XXX====
Any suggestions here???.
Thanks
Ramu

Hi Ramu,
As indicated by the error message, OSPFv3 VRF-Lite is not supported yet. Only BGP and static are available. Please work with your Cisco representative for road-map information.
HTH
Laurent.

SPLIT VALUATION - EXT/INT PO Indicator- OMWC

Hi,
     Could someone help me understanding this?
     While Configuring Split Valuation, for a Valuation Type I've set the 'EXT PO' indicator as '0' and associated it to a Valuation Category( No default Valuation Type has been set). After associating the Valuation Category and the Valuation Types to a material, I tried creating a PO for the same. It allowed me to create a PO, with the Valuation Type for which the EXT PO is set as '0'.
What I inferred from the settings is that it should have thorwn an error. Have I inferred correctly or else am missing out somewhere. Also, please help me to understand the significance of 'Acct Category Reference' in 'OMWC' Tcode (P.S: Could appreciate the use of Acct Categ Ref in Automatic Account Determination ie Valuation Class determination. But the Significance of Acct Categ Ref. in Split Valuation Type still remains vague.)
TIA,
Regards,
S. Satish

Hi Prabhu,
Thank You very much for your time.
                  The Valuation Type is as follows
                   INDI     EXT PO Indicator '0'.
                The Valuation type 'INDI', got defaulted from the Inforecord in the PO created. The PO is a standard PO.
              Since for 'INDI', the EXT PO is set as '0', ie Not allowed, should I expect an error in this case ( In actual it did not occur. I            suppose it should. Correct me if am wrong).
Acct category Reference is concerned:
     Is it that the Acct Category Reference chosen in the Valuation Type configuration, would surpass the Acct Category ref set for the Material Type?
Ie) if the Acct category ref for 'ROH' is say 0001. If I assign this Material Type for a material and still could I assign a Valuation Category associated to say HALB ( I know in real time, its not possible. But would like to understand if the system validates).
Regards,
S. Satish

Program associated with the creation of a virtual instrument of Lab View. Please help me

I have a question with program associated with the creation of a virtual instrument of Lab View. 1.Create of virtual instrument based on the NI 9401 module fitted to the chassis NI Compaq DAQ (Ni-cDAQ-9172). Creating a virtual tool needed to implement the following counting impulses in impulse series, visualization of data through a digital indicator, comparing the number of impusite with pre-set value, that value can be assigned by the user. Indicator light when reaching in reaching the set number of pulses, the opportunity to reset the meter of a button on the front panel. Switch to digital output in reaching the set number. I hope someone can help me.
Solved!
Go to Solution.

What is your question? You've described what the program is supposed to do, but it's not clear what you're asking about. Do you need help getting started? If so, have you gone through the LabVIEW tutorials? You and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free. Have you looked through the many examples that ship with LabVIEW for data acquisition?

Add New value to the special reference indicator on the TO field

Can you please tell me how to add a new value to the special reference indicator dropdown which is on the transfer order.
LTAK->SPEZI ? Currently it is displaying values A & B in the drop down and want to add a new value to the indicator.
Thanks
John

Hi,
I dont think you will be able to add more values to this field from configuration.
If you check the data element and domain associated with this field (LTAK_SPEZI) in SE11. You can see that the value range for the domain has been defined there as A and B only.
So if you want to add a new value you can ask and ABAP/technical consulatnt to add new values to this Domain.
However i am not sure it will be useful (unless you have a specific requirement and want to modify the standard programs) as the field is checked in different program (eg in inculde LL03AF4V , LL03AF7F ) against these fixed values A and B.

Problem while working with Business Indicator in oracle BPM11.1.1.7

I am working for process analytic and BAM dash board for our application. currently i am having following problems
I have define business indicator of type counter, measure and dimension.I am able to see counter and dimension business indicator(BI) Both in data association editor and custom dash board editor in work space. However , measure BI appears in brown color in data association editor and i am not able to perform any mapping to it. additionally, Measure BI does not appear even in work space customer editor .
Any solution for above problem is welcome

Hi
I have tried this and with small change this is working fine.
TYPES :
BEGIN OF ty_tadir,
pgmid TYPE pgmid,
object TYPE trobjtype,
obj_name TYPE sobj_name,
END OF ty_tadir.
DATA : it_tadir TYPE STANDARD TABLE OF ty_tadir,
wa_tadir TYPE ty_tadir.
data: stmp_dokhl like TAB512 occurs 100000 with header line.
data: options1 like rfc_db_opt occurs 10 with header line.
data: wa_options1 like line of options1.
data: nametab1 like rfc_db_fld occurs 10 with header line.
START-OF-SELECTION.
DATA : W_VALUE(5) TYPE C,
W_VALUE1(20) TYPE C.
W_VALUE1 = 'OBJ_NAME LIKE ''Z%'''.
wa_options1-text = w_value1.
APPEND wa_OPTIONS1 to OPTIONS1.
CLEAR wa_OPTIONS1.
call function 'RFC_READ_TABLE'
*destination 'zard'
exporting
query_table = 'TADIR' "'ZBANK_GUARANTEE'
tables
options = options1
fields = nametab1
data = stmp_dokhl
exceptions
table_not_available = 1
table_without_data = 2
option_not_valid = 3
field_not_valid = 4
not_authorized = 5
data_buffer_exceeded = 6
others = 7 .

In Bridge I cannot find Lightroom as a program to open files. All the other programs like photoshop etc are indicated?

In Bridge I cannot find Lightroom as a program to open files. All the other programs like photoshop etc are indicated?

You would go into Preferences > File Type Associations and from the dropdown menu and choose "Browse" to get to Lightroom.
So yes you can set files that Lightroom supports to open from Bridge into Lightroom.
But I don't think you'd want to.
Lightroom is a standalone product for a Photography workflow. Bridge is a manager for Creative suite products like Photoshop, Illustrator, Indesign. Basically web and print design workflows.
Bridge is not a manager for Lr because Lr has it's own catalog system.
Lightroom is not a Creative Suite product.
Bridge does use Adobe Camera Raw to make adjustments, but move those adjusted files into Lr, you have to make a decision whose settings stay.
This video should explain the difference.
Adobe Bridge CC vs. Lightroom 5 - Terry White's Tech Blog
Julieanne Kost also explains using the two together. LR/BR - Working with Lightroom and Adobe Bridge | Adobe Evangelists - Julieanne Kost | Adobe TV
Gene

Oci_fetch_array - Uppercase associative indices

Similar Messages

Maybe you are looking for