OCI version 10.1.0.2.0 is not supported in Toad

I have upgraded my 9203 Oracle database to 10.1.0.2. Now when I connect to the database via TOAD 7.6, it gives me the following error:
"OCI version 10.1.0.2.0 is not supported"
Can some one let me know about how to solve this problem.
Thanks in Advance.
-Bikash

Here an answer from askTom:
Hi Tom,
I am not sure if I can ask this question in this thread or whether you are aware
of the following problem (as you are very fond of SQL*plus... ;) ).
I was happily usig toad 7.6 to work with oracle 9i. But now an upgrade to 10g
has caused toad fail to connect. Error "OCI version 10.1.0.2.0 is not
supported". But if I install 9i client and try to connect, then it works fine.
Is there any workaround?
Thanks and regards
Praveen
Followup:
you'd have to ask the makers of toad if they have a 10g client version or not.
Basically what is happening is that you have a 9i compiled piece of client
software (toad).
it uses, it depends on the 9i client software.
in order to use the 10g client software -- you'd need a new binary from the
makers of toad.
SQLPlus would be the same -- the 9i sqlplus needs the 9i client, the 10g sqlplus
needs the 10g client and so on.
As it is -- you are OK right now, you have installed the software needed by toad
and a 9i client connecting to a 10g database is "ok, supported and normal"

Similar Messages

TOAD ERROR : OCI version 10.2.0.1.0 is not supported

Hi all,
Previously i have oracle 9i in my system, now i installed oracle 10.2.., after this when i am trying to retrieve data from tables im getting this error "OCI version 10.2.0.1.0 is not supported". Please help me how can i solve this problem.
Thanks in advance

You need deinstall the old version of toad and install version higher than V 8.5 which will fix the issue. Because the default home is read by Toad sometimes reinstallation will fix the issue.
--kccrga

Avorcldb verify - ERROR: specified version 10.2.0.1.0 is not supported

Hello all,
I got this error when verify operation of source compatibility with the Collectors:
Audit Vault Server: Windows Server 2003, Oracle 10.2.0.3
Audit Vault Client: Windows Server 2003, Oracle 10.2.0.1
Run this command on Audit Vault Server:
E:\>avorcldb verify -src 10.10.70.51:1521:orcl -srcusr system/oracle -colltype ALL
source ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM verified for OS File Audit Collector collector
source ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM verified for Aud$/FGA_LOG$ Audit Collector collector
ERROR: specified version 10.2.0.1.0 is not supported
Please provide me any infomation to fix this error.
Do I need to upgrade the Audit Vault Client to 10.2.0.3 ?
Thanks.

Thank Damorgan,
It's ok after upgrading to 10.2.0.3.
But now I get another errors, please help:
urgent: could not get AV agent connection using jdbc:oracle:oci:@AV
Thanks.

HT5022 I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express. But when I go to mount, it says it can't be installed as version of OSX (latest Mountain Lion) is not supported. Feels like Im back using Windows...

I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express - because Airport Util 6.0 won't recognise it.
But when I go to mount, it says Airport 5.6 it can't be installed as my version of OSX (latest Mountain Lion) is not supported/does not support on 5.6.
Super unhelpful error messages bringing back memories of using Windows...
Anyone sussed this, or have Apple just fazed out the original Airport Express hardware on the sly?

Generation 1 AirPort Express is Model No A1264. Check the side of your Express to look for the model number there. AirPort Utility in Mountain Lion will configure this model.
More likely, you have an older "b/g" version of the Express. Apple started the "Generation" thing with "n" capable devices. The Model number of your device is likely either A1084 or A1088. AirPort Utility in Mountain Lion no longer supports these older "b/g" devices.
If you have a Mac there running an earlier version of the operating system, you can use that to configure the Express.
Or, there is is workaround to install AirPort Utility 5,6 for Lion on Mountain Lion. See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Version 03.03.00.XO - MLS QOS not supported

Hi All,
Anyone face the same problem with the following IOS Version?
MLS QOS is not supported in global command.
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.03.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 14-Aug-13 07:26 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: 15.1(1r)SG2
Switch uptime is 6 minutes
System returned to ROM by power-on
Running default software
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1449
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Information for 'WS-X45-SUP8-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
cisco WS-C4506-E (P5040) processor (revision 2) with 4194304K bytes of physical memory.
Processor board ID FXS1812Q346
P5040 CPU at 2.2GHz, Supervisor 8-E
Last reset from PowerUp
1 Virtual Ethernet interface
20 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
SWITCH(config)#mls qos
                     ^
% Invalid input detected at '^' marker.
SWITCH(config)#
SWITCH(config)#?
Configure commands:
aaa                         Authentication, Authorization and Accounting.
access-list                 Add an access list entry
access-session              Access Sesion Global Configuration Commands
agent-server                Modify DNS server properties
alias                       Create command alias
ancp                        Configure ANCP
archive                     Archive the configuration
arp                         Set a static ARP entry
async-bootp                 Modify system bootp parameters
audit                       Router Audit
authentication              Auth Manager Global Configuration Commands
auto                        Configure Automation
banner                      Define a login banner
beep                        Configure BEEP (Blocks Extensible Exchange
                              Protocol)
bfd                         BFD configuration commands
bfd-template                BFD template configuration
boot                        Modify system boot parameters
bridge                      Bridge Group.
buffers                     Adjust system buffer pool parameters
bulkstat                    Bulkstat Application
call-home                   Enter call-home configuration mode
cdp                         Global CDP configuration subcommands
cef                         Cisco Express Forwarding
cisp                        Set CISP parameters
class-map                   Configure CPL Class Map
clns                        Global CLNS configuration subcommands
clock                       Configure time-of-day clock
cluster                     Cluster configuration commands
cns                         CNS agents
comet-server                Configure comet-server properties
config-register             Define the configuration register
configuration               Configuration access
control-plane               Configure control plane services
crypto                      Encryption module
cts                         Cisco Trusted Security commands
default                     Set a command to its defaults
default-value               Default character-bits values
define                      interface range macro definition
device-sensor               IOS Sensor Commands
diagnostic                  Configure diagnostic information
dns-server                  Modify DNS server properties
dnsix-dmdp                  Provide DMDP service for DNSIX
dnsix-nat                   Provide DNSIX service for audit trails
do-exec                     To run exec commands in config mode
dot1x                       IEEE 802.1X Global Configuration Commands
downward-compatible-config Generate a configuration compatible with older
                              software
eap                         EAP Global Configuration Commands
emm                         Specify pre-loading of MDF
enable                      Modify enable password parameters
end                         Exit from configure mode
energywise                  EnergyWise Global Configuration Commands
epm                         EPM Global Configuration Commands
errdisable                  Error disable
ethernet                    Ethernet configuration
event                       Event related configuration commands
exception                   Exception handling
exit                        Exit from configure mode
fallback                    Fallback configuration commands
fhrp                        Configure First Hop Redundancy Protocols
file                        Adjust file system parameters
fips                        FIPS mode after next reload
flow                        Global Flow configuration subcommands
format                      Format the output
global-address-family       Enter address-family base routing topology mode
help                        Description of the interactive help system
hostname                    Set system's network name
hw-module                   Apply command (e.g. shutdown) to specified
                              hardware target
hw-module                   Control of individual components in the system
hw-switch                   Control of individual components in the switch
id-manager                  ID Pool Manager
identity                    Identity Configuration Commands
infra-test                  Configure end2end properties
interface                   Select an interface to configure
ip                          Global IP configuration subcommands
ipc                         Configure IPC system
ipv6                        Global IPv6 configuration commands
isis                        Global ISIS configuration subcommands
issu                        no description
key                         Key management
kron                        Kron interval Facility
l2                          Layer 2
l2protocol-tunnel           Tunnel Layer2 protocols
lacp                        LACP configuration
li-view                     LI View
license                     Configure License
line                        Configure a terminal line
link                        Enable Link State Tracking feature
lldp                        Global LLDP configuration subcommands
location                    Global location configuration commands
logging                     Modify message logging facilities
login                       Enable secure login checking
mab                         MAC Authentication Bypass Global Configuration
                              Commands
mac                         Global MAC configuration subcommands
macro                       Macro configuration
media-proxy                 Global media proxy configuration
mediatrace                  Mediatrace Application
memory                      Configure memory management
metadata                    Metadata Application
mka                         MACsec Key Agreement (MKA) configuration
module                      Module
monitor                     Monitoring different system events
mvr                         Enable/Disable MVR on the switch
netconf                     Configure NETCONF
Thank you.

Hi,
QOS implementation has radically changed since the advent of
sup-7 & later
You no longer set mls qos as qos is on the engine by default.
Please see the following links
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/white_paper_c11-539588.html
"Ingress QoS: Default Actions
First and foremost, QoS does not need to be enabled on the Supervisor Engine, it is on by default in compliance with the MQC construct.
When a packet arrives at an interface, there are two options to take into consideration: is there a policy attached or not? If the packet arrives with or without a marking and there is not a policy attached to the interface, packets will flow through the switch untouched. There are no questions as to where the packet came from or if it has a valid marking. If the packet arrives with or without a marking, and a policy is attached to the interface, the packet will only then be subject to the policy classification."
And the config guide
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1/XE_330SG/configuration/guide/config/qos_mrg.html#wp1461453
Hope this helps
Regards
Alex

Tuxera Version That Comes with HDTC705XK3A1 Does Not Support on Install on MAC OSX 10.9.2

The Tuxera version pre-installed (2012.3.6) on my hard drive does not support Mac OS X 10.9.2
I first looked at the support site and it says there isn't any updates for drivers & software for the Toshiba 500GB Canvio Connect Portable Hard Drive (HDTC705XK3A).
I am on OSX 10.9.2 and would like a working copy of Tuxera to use with my new Toshiba drive. Please advise where I get the updated version. Going to Tuxera requires buying a copy of the software.
Thanks,
Doug

I have the same problem after an upgrade to my iMac. Fortunitely, a wWindows machine will read your drive. I also have a new Macbook Pro with 10.9.3 on it and it loaded Tuxera correctly. Not sure why it works on one not the other. I wnet through the following steps:
After I upgraded my iMAC to Maverics, I could not see my NTFS drives in finder or on the desktop. I could see my NTFS drives in Disk Utility but they were grayed out and are not accessible. I could boot the iMac in Windows and have access to all of my NTFS drives.
I tried reinstalling the latest version, 2013.2, downloaded from your web page. I can see my NTFS drives but could not write to them. I then got the following message when the system started up, "invalid product key". When I opened Tuxera from the system preferences page I get the following message on the Activation page, "Current status: Invalid product key. Limited performance mode." I have tried reloading Texura from the Toshiba drive, but the process doesn't complete the last step.
As a last step, I uninstalled Tuxera and can not reinstall it. I get the message "The Tuxera NTFS for Mac installer could not detect your Toshiba External HDD. Please attach it to your Mac and run the installer again. I'm running the installer from the Toshiba drive so the installer should detect it.
Please note, I have a new Macbook Pro that came with Mavericks and I loaded Tuxera from the same Toshiba drive. It has no problems writing to it. The upgrade to Mavericks caused the problem.

Oracle Version 10.1.0: Data type is not supported

Hi,
I am getting "Data Type is not supported" whenever I try to access tables with lob column in Toad.
Oracle server version is 10.1.0 and using toad version 7.6. Sql net version 9.2.0
Any pointers towards the resolution?
Thanks in advance.
Bhavesh

You could take this opportunity to upgrade your Toad to version 10 of sqlplus.
Failing that there are mail lists for those less productive souls struggling with the amphibious software at which can be found at.
http://www.toadsoft.com/maillist.htm

OAF version 10.1.3.3.0.3 not supporting to 11.5..10.2

Hi,
Earlier we are using 9.0.3 version of OAF , which is suported to 11.5.10.2 EBS version .
Now I have upgrade the verion of OAF to 10.1.3.3.0.3 and the form is not supported to 11.5.10.2 EBS version , i m getting below mentioned error while running the form.
Please help how to resolve the issue .
500 Internal Server Error
oracle.apps.fnd.cache.CacheException at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1294) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1149) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1118) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1085) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1072) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:593) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:570) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:524) at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1094) at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:225) at OAErrorPage.jspService(_OAErrorPage.java:62) [OAErrorPage.jsp] at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.3.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193) at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:847) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:813) at runregion.jspService(_runregion.java:193) [runregion.jsp] at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.3.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298) at java.lang.Thread.run(Thread.java:595)Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: oracle.apps.fnd.common.PoolException: Not able to create new database connection. at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:833) at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802) at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624) at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216) ... 50 moreCaused by: oracle.apps.jtf.base.resources.FrameworkException: An exception occurred in the
method CacheAccess.getnullThe base exception is:Not able to create new database connection.

Hi,
JDeveloper 10g is not supported for EBS 11i
You can Download correct version depending on your EBS Version
Metalink Note
OA Framework - How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x [ID 416708.1]
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=55244593374894&id=416708.1&_afrWindowMode=0&_adf.ctrl-state=94cu8zvhj_4
Thanks,
Jit
Edited by: appsjit on Apr 29, 2013 3:10 PM
Edited by: appsjit on Apr 29, 2013 3:33 PM

HT201272 I seem to have a version of overdrive media console that does not support wma audiobooks files. Is there anyone with this problem with a solution.

I recently installed the overdrive media console. I was able to down e books and mp3 books but when I tried to down wma books. A message flashes out that the omc that I installed from the apps store is unsupported format. The version of omc does not support wma audiobook titles. Any suggestions.
Daphne

WMA stands for Windows Media Audio...it is a Microsoft audio format that is not supported on the Mac or iOS version of the apps. If you want to use the WMA audiobooks, you will have to use the Windows desktop app. You can use MP3 audiobooks on any version of the app.

How do I activate old version of Photoshop CS3 as it is not supported over the phone and website notes are not helping...? I need a human being to resolve this

I am trying to activate an old version of Adobe Photoshop CS3 but internet activation is not working and the notes on the page online are not helping either. I need a person to assist me.

You need to deal with Adobe for you problem this is an Adobe Photoshop User forum site not part of Adobe support users here do not have access to Adobe activation servers and database. You need to get someone at Adobe to help. Adobe support is not what it should be. Good luck.

I have the newest version of Ps CC, but I does not support the extension Mediaclip. How can I get an older version?

Do I have to buy another version of Photoshop?

You can download CS6 by checking the respective "other versions/ older versions" list at the bottom of the CC app.
Mylenium

OCI version compatibility

I have a application using OCIStmtFetch2() statement but some users have oracle 8i and the dll only supports OCIStmtFetch() statement:
*Any way to check witch version is installed and use <if> sentence ?
* Do I need to distribute application with oci.dll included ?
* Need to use only OCIStmtFetch() instead of OCIStmtFetch2() ?
Compiler : VC++
Thanks a lot

*Any way to check witch version is installed and use <if> sentence ?Not easily. You'd need to code explicitly against only a common-denominator of OCI 8i to 11g, find out the version, and explicitly GetProcAddress (dlsym on Unix) OCIStmtFetch or OCIStmtFetch2, with all the casts involved and all... Not for the feint of heart ;-)
OCILIB is a C library wrapping OCI using basically the technique above, and is actively developed and tested against most OCI versions. But you'd have to recode your app against it...
* Do I need to distribute application with oci.dll included ?You could. You'd need the Instant Client (Lite or not) instead of just oci.dll. I don't think 11g's client side support 8i anyway, so you'd need to use an older client (10g?)
* Need to use only OCIStmtFetch() instead of OCIStmtFetch2() ?Sounds like the easiest solution to me ;-) --DD

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

My system for work only supports Firefox 7.0 and 8.0. I can only find 3.6 and 9.0 available on your website. Where can I find 8.0. I really love Firefox, but I can't use an unsupported version, as features of our Blackboard will not work.

Where can I find a download for Firefox 8.0. Work does not support the 9.0 platform, yet.

Firefox 8 English version for windows vista is here
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/8.0.1/win32/en-US/Firefox%20Setup%208.0.1.exe

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

OCI version 10.1.0.2.0 is not supported in Toad

Similar Messages

Maybe you are looking for