OCI8 on Linux/11g

Hi to All
I have installed Oracle Linux and Oracle DB 11g.
When I try to install PHP with OCI8 library, the installation abort whi not found the library.
How can download or install this library
Thank You and Best Regards
Gaetano

As mentioned here,
http://us.php.net/manual/en/oci8.setup.php
Make sure you set these environment setting correctly.
ORACLE_HOME
ORACLE_SID
LD_PRELOAD
LD_LIBRARY_PATH
NLS_LANG

Similar Messages

Linux 11g client to solaris10 11g server

Can you confirm that a linux 11g client can connect to a solaris 10 11g server?
I'm getting some weird connectivity issues between these and would like to confirm it isn't just me and my solaris 10 patch level or some other unknown.
tnsping and sqlplus hang. tcpdump shows that there is no push of data from the server after the initial SYN/SYN ACK. Don't think it is the firewall, since the handshake takes place, but I'm not the solaris sysadmin, so I can't be 100% on that.
Thanks.

Oracle client server interoperability is not depends on platform. Linux 11g client definitely supported to connect to Solaris 11g server.
Can you post the content of tnsnames.ora of your 11g client (is it same as your 10g client that you said working?)
also the output from
lsnrctl status
on server side.

OCIEnvNlsCreate() failed: OCI8+PHP+Linux+Oracle 11g

Hi All,
I've been struggling with this since 3 days. I'm getting the following error while using oci_connect:
Warning: oci_connect(): OCIEnvNlsCreate() failed. There is something wrong with your system - please check that LD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries
My system configuration:
PHP : 5.3.3
OS: Red Hat Enterprise Linux Server release 6.1
Oracle: 11g
OCI8: 1.4.9
My phpInfo() shows that OCI8 is configured with PHP. I did set the LD_LIBRARY_PATH to Instantclient in httpd conf file itself and gave permission 777 just to make sure it's not permission issue. I did not set any ORACLE_HOME because my Oracle database is on a different server.
Please help!!

Your post doesn't contain enough detail to identify a cause.
See Unable load library '/usr/lib64/php/modules/oci8.so' - libclntsh.so.11.1 It is an example of a post that has good detail.

Linux 11g red hat 5 SDO_TOPO_MAP.LOAD_TOPO_MAP fails

Hi
I think this is a bug in the linux build of oracle 11 - I have a script that works on my 11g windows install where I
set timing onset verify off
set echo offEXECUTE SDO_TOPO_MAP.CREATE_TOPO_MAP('F_DATA', 'F_DATA_TOPOMAP', 100, 21000, 100);
EXECUTE SDO_TOPO_MAP.LOAD_TOPO_MAP('F_DATA_TOPOMAP', 593594.459800904, 246439.007109636, 635147.466206473, 287486.403346775, 'TRUE','TRUE');
-- CALL SDO_TOPO_MAP.LOAD_TOPO_MAP('F_DATA_TOPOMAP', 593594.459800904, 246439.007109636, 635147.466206473, 287486.403346775, 'TRUE','TRUE') INTO :res_varchar;
-- PRINT res_varchar;
INSERT INTO F_NODES VALUES(1, 1, 19009164, 632617.188, 287286.406, 0, 0, 0, NULL, 0, SDO_TOPO_MAP.CREATE_FEATURE('F_DATA', 'F_NODES', 'FEATURE', SDO_GEOMETRY(2001, 3078, SDO_POINT_TYPE(632617.188,287286.406,NULL), NULL, NULL)));
INSERT INTO F_NODES VALUES(1, 2, 19000001, 632640, 286538.969, 0, 0, 0, NULL, 0, SDO_TOPO_MAP.CREATE_FEATURE('F_DATA', 'F_NODES', 'FEATURE', SDO_GEOMETRY(2001, 3078, SDO_POINT_TYPE(632640,286538.969,NULL), NULL, NULL)));
and what is returned is
ERROR at line 2:
ORA-29532: Java call terminated by uncaught Java exception:
oracle.spatial.topo.TopoDataException: no updatable TopoMap object has been
created
When I check the the status of with:
SELECT SDO_TOPO_MAP.LIST_TOPO_MAPS FROM DUAL;
LIST_TOPO_MAPS
(F_DATA_TOPOMAP, F_DATA, read-only)
Is this a bug -- or a feature peculiar to the Linux build of 11g?
Any response would be appreciated
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production

When you use the sdo_topo_map.create_feature interface,
the changes in the TopoMap cache are flushed to the DB for each feature.
This is done to maintain the consistency between the features and
topo elements.
The SDO_TOPO_MAP.GET_EDGE_ADDITIONS gets you the edges that
are added and are still in the cache.
So in this case, since all changes from the cache are flushed, the procedure
returns no edges.
siva

Oracle-Linux 11g Install error

Hi guys,
After starting Ora installer on Linux I'm getting this error:
Invalid source path '../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path.
: No such file or directory
I downloaded 11g twice thinking that maybe the files are corrupt but both times got the same error as above directory does not exist when I unzip Oracle 11g db files... ???
Please help.
I downloaded 11g twice thinking that maybe the file is corrupt but both times got the same error as above directory does not exist when I unzip Oracle db files...
Please help.
Thank you very much.
Art.

I already closed the session... I started Oracle Installer as a super user in Oracle-Linux:
...@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 21968 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-13_08-24-59PM. Please wait ...
Invalid source path '../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path.
The problem I think is that directory '.../oracle.jdk/...' does not exist.
Thank you very much.
Art.
Edited by: user6248369 on Feb 13, 2011 6:24 PM

Install Oracle Linux + 11G Rac (itanium) HELP

Hello, sorry for the English ...
I have 2 hp server rx2620 itanium, mas1000 and should do tests to install oracle 11g rac linux oracle, but on linux I can not, someone can give me some advice or guide on the internet? my question is how to share the disk, so that the 2 servers are able to see them, I use ASMLib?
2 hp Server rx2620 itanium (4 NICs + 2 fiber channel cards)
MSA1000 (2 100gb disks to be shared) Fibre Channel
Oracle Linux 5.5 IA64
Oracle 11g Grid
Oracle Database 11g
Sorry and thanks.

There does not seen to be much current development in this area. Oracle Linux 5.5 is apparently the last version available. I would ask Oracle support about current and future plans to support the IA64 bit platform. Perhaps you might rather want to use HP Unix instead of Linux. Apparently Red Hat is no longer going to support the IA64 platform according to http://www.theregister.co.uk/2009/12/18/redhat_rhel6_itanium_dead. Oracle Stops All Software Development For Intel Itanium Microprocessor (March 2011) http://www.oracle.com/us/corporate/press/346696
I think this might actually be another example of a silly development in the IT industry, where customers prefer cheaper, often more trivial solutions, over more expensive superior solutions. The majority of customers is apparently buying into the the Intel x86-64 architecture to support x86 CISC based software like MS windows, thinking a x86-64 CPU is just as powerful as a IA 64-bit CPU.
Regrading your question to share the disks, you need hardware that supports device sharing and a cluster file system. There are several options for hardware, typically fiber-channel, iSCSI and the older differential (HVD) SCSI for SAN and even NFS can apparently be used with a certified NAS storage. MSA1000 should be fine. Oracle provides OCFS2 cluster filesystem and you can also use ASM. You don't necessarily need ASMLib, but need to setup multipath or udev. How to setup the MSA1000 for shared storage should be in the Storage controller manual.

Database migration from Windows 10g to Linux 11g

Hello All,
We are having a small database in a windows 2003 server machine. We would be shift this database to another Linux platform. So far My action plan is as follows:-
1. Shutting down instance.
2. copying physical structure of Database
3. alter database backup control file to trace as '....sql';
4. Transfer all the files.
5. In the Linux server creating pfile and creating control file using following commad:-
CREATE CONTROLFILE REUSE DATABASE "DBNAME" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY
LOGFILE GROUP 1 '../REDO01.LOG' SIZE 50M,
GROUP 2 '../REDO02.LOG' SIZE 50M,
GROUP 3 '../REDO03.LOG' SIZE 50M
DATAFILE '../SYSTEM01.DBF',
'../UNDOTBS01.DBF',
'../SYSAUX01.DBF',
'../USERS01.DBF',
'../RMANTBS01.DBF'
CHARACTER SET WE8MSWIN1252
6. Opening the database in upgrade mode. I am getting error:
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/COLDBACKUP_T1RMAN_POC/SYSTEM01.DBF'
Please help
-Reards,
Saha

j_DBA_saha wrote:
Hello All,
We are having a small database in a windows 2003 server machine. We would be shift this database to another Linux platform. So far My action plan is as follows:-
1. Shutting down instance.
2. copying physical structure of Database
3. alter database backup control file to trace as '....sql';
4. Transfer all the files.
5. In the Linux server creating pfile and creating control file using following commad:-
CREATE CONTROLFILE REUSE DATABASE "DBNAME" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY
LOGFILE GROUP 1 '../REDO01.LOG' SIZE 50M,
GROUP 2 '../REDO02.LOG' SIZE 50M,
GROUP 3 '../REDO03.LOG' SIZE 50M
DATAFILE '../SYSTEM01.DBF',
'../UNDOTBS01.DBF',
'../SYSAUX01.DBF',
'../USERS01.DBF',
'../RMANTBS01.DBF'
CHARACTER SET WE8MSWIN1252
6. Opening the database in upgrade mode. I am getting error:
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/COLDBACKUP_T1RMAN_POC/SYSTEM01.DBF'
Please help
-Reards,
SahaThis will not work ....
Since you are performing the cross-platform migration . So this method will not work . Either use the exp/imp or datapump or the transport tablespace . for more about the transport tablespace check the below link
http://neeraj-dba.blogspot.in/2012/01/cross-platform-transportable.html
Hope this may help you
--neeraj

Cannot upgrade Linux 11g SQLDeveloper to 1.5.1

Downloaded sqldeveloper-1.5.54.40-1.noarch.rpm
as oracle user tried to install from /home/oracle but I get an error:
$ rpm -Uvh sqldeveloper-1.5.54.40-1.noarch.rpm
error: can't create transaction lock on /var/lib/rpm/__db.000
can't find info about this error.

Ok, ran it as root on /home/oracle
created it on /opt/sqldeveloper
when I try to run it (as roacle) It asks for the path of a full J2SE installation
where is it?
TIA

11g Clusterware installation VIPCA Exception error on linux

Hi,
I'm trying to build a 11g RAC on OEL5.1 with vmware for education purposes.
Software used:
- Oracle Enterprise Linux 5.1
- 11g clusterware for linux
- 11g Enterprise Edition database software for linux
- VMware 1.0.8 for linux
Hardware:
- Intel 2.3GHz quadcore with 4GB RAM and 250GB harddisk
I have successfully setup:
- host machine using OEL5.1 and installed VMware 1.0.8
- 2 nodes with guest OS using OEL5.1
When installing 11g clusterware, at the last part when we need to run orainst.sh and root.sh as root user on both nodes, I am able to run orainst.sh successfully on both nodes.
However, root.sh is only able to run successfully on node 1 but had VIPCA error on node 2.
Excerpt of the root.sh error message on node 2:
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
rac1
rac2
Cluster Synchronization Services is active on all the nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps+
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/wizard/WizardFrame+
Executing crs_stat -t as root user on both nodes only show 2 crs processes (CRSD and EVMD).
I did try invoking vipca manually as root user, but keep getting the same Exception error:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/wizard/WizardFrame+
I have tried installing clusterware more than 3 times and keep getting the same errors.
Has anyone experienced this vipca error before?
Regards
Jim
Edited by: user6442011 on Jul 7, 2009 11:39 PM

Check vipca.jar file at $ORA_CRS_HOME/srvm/jlib/vipca.jar
$ORA_CRS_HOME/jdk/bin/jar -tvf $ORA_CRS_HOME/srvm/jlib/vipca.jar
Or
find $ORA_CRS_HOME -name vipca.jar -type f
Example: test...
# mv $ORA_CRS_HOME/srvm/jlib/vipca.jar $ORA_CRS_HOME/srvm/jlib/vipca.jar-bak
# $ORA_CRS_HOME/bin/vipca
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ops/vipca/VipCAStep:
- find vipca.jar
# find $ORA_CRS_HOME -name vipca.jar -type f
it should be at $ORA_CRS_HOME/srvm/jlib PATH
if not find... you can copy from other patch or ... (Or check why don'tfind ... it can happen if we patch, so find from old version )
If find ..
Check
$ORA_CRS_HOME/jdk/bin/jar -tvf $ORA_CRS_HOME/srvm/jlib/vipca.jar | grep Wizard
;) check you can read it (vipca.jar)
Or ... Example
# type vipca
/u01/oracle/crs/bin/vipca
# ls /u01/oracle/crs/srvm/jlib/vipca.jar
# /u01/oracle/crs/jdk/bin/jar -tvf /u01/oracle/crs/srvm/jlib/vipca.jarEdited by: Surachart Opun (HunterX) on Jul 8, 2009 5:22 PM
Edited by: Surachart Opun (HunterX) on Jul 8, 2009 5:36 PM

Drawstring is not working in Linux !!!

hi everbody
Graphics.drawString is not working properly on Linux ,
how can i fix it.
what is problem.
on XP , 10gR2 db evertything is ok. 326x160 picture and "Sample Text." seen on browser.
on Oracle Unbrakeble Linux , 11g db 326x160 picture seen on browser but "Sample Text." absent on picture !!!!!
complete code is below
Thanks.
create or replace and compile java source named java1 as
import java.awt.*;
import java.awt.image.BufferedImage;
import java.io.*;
import com.sun.image.codec.jpeg.JPEGCodec;
import com.sun.image.codec.jpeg.JPEGImageEncoder;
public class MyGraph
public static byte[] vcanvas (int width ,int height ) throws IOException
BufferedImage bimage = new BufferedImage(width,height, BufferedImage.TYPE_INT_RGB);
Graphics g = bimage.createGraphics();
g.setColor(Color.white);
g.fillRect(0, 0, width - 1, height - 1);
g.setColor(Color.red);
g.drawRect(0,0,width-1,height-1);
g.setColor(Color.black);
g.drawRect(2,2,width-3,height-3);
g.drawString("Sample Text.",10,height/2);
ByteArrayOutputStream baos = new ByteArrayOutputStream();
JPEGImageEncoder jpeg = JPEGCodec.createJPEGEncoder(baos);
jpeg.encode(bimage);
baos.flush();
baos.close();
return baos.toByteArray();
} // MyGraph
create or replace function javaimage(w number,h number) return varchar2
as LANGUAGE JAVA name 'MyGraph.vcanvas(int, int) return byte[]';
create or replace procedure imgXYZ is
vData varchar2(32767);
begin
owa_util.mime_header('image/jpeg', FALSE );
owa_util.http_header_close;
vData:=javaimage(326,160);
htp.prn(vData);
end;
http://server:port/schema/imgXYZ

You have to start Http server for that :
$ $ORACLE_HOME/Apache/Apache/bin/apachectl start

Oracle 11g RAC hp-unix 11.31安装

在linux安装11g RAC的时候需要在 /etc/security/limits.conf 对oracle,grid进行设置。
HP-UNIX有没有类似的地方进行设置？

Away from these things – anythings I need to configure or any services that I need to stop – like listener etc.It depends on setting you want.
You may use two listeners separately or you can use one listener (9i) for both versions.
If you decide to use two listeners (better option) then they must be listening on different ports (of course) and you don't need to stop or reconfigure anything on 8i.
If you want use one listener for both instances (8i,9i) then you need to configure listener.ora for both instances and you should use 9i listener. But this option is not good as the first one.
Just little hint. Create in user's home new enviroment file (for example .oracle9) with completely new enviroment for 9i. Then for work with 9i simply reset the enviroment by execution of ". .oracle9".
Basicaly you don't need to stop anything during installation (but for sure you could to prevent some mistake during installtion) but installation could affect the server's performance.

Need Steps or documents to connect existing 10g agent to 11g oms

Hi All,
Just installed 11g oms on oel 5.5 linux and it runs good. We have several hp servers run 10205 agents and they are monitored by 10205 oms on window. We want to use this new 11g oms to replace the 10205 oms. How to make this 11g linux oms to find the 10g hp agents?
Has anyone known the steps to configure an existing 10205 hp agent to connect to linux 11g oms? Or generally the steps to modify an existing 10g agent to see the 11g oms?
Thanks in advance for any help!

Sorry my mistake.
You should
1.
Stop the Management Agent.
2.
Locate the emd.properties file in the Management Agent home directory:
AGENT_HOME/sysman/config/emd.properties
3.
Use a text editor to open the file and locate the REPOSITORY_URL property.
4.
Modify the value for the REPOSITORY_URL property so it references the new Management Service. For example:
REPOSITORY_URL=http://mgmthost2.acme.com:4889/em/upload
5.
Modify the value for the emdWalletSrcUrl property so it references the new Management Service. For example, if the new Management Service is on a host called mgmthost2.acme.com , modify the property as follows:
emdWalletSrcUrl=http://mgmthost2.acme.com:4889/em/wallets/emd
6.
Save your changes and close the emd.properties file.
7.
To ensure that the Management Agent is no longer holding any specific data or settings from the previous Management Service, delete all the files in the following directories:
AGENT_HOME/sysman/emd/upload/
AGENT_HOME/sysman/emd/state/
AGENT_HOME/sysman/emd/collection/*
AGENT_HOME/sysman/emd/lastupld.xml
AGENT_HOME/sysman/emd/agntstmp.txt
AGENT_HOME/sysman/emd/blackouts.xml
AGENT_HOME/sysman/emd/protocol.ini
Note that this action removes all user-defined metrics (UDM)s and custom changes to metric and policy collections.
Note:
You can use the emctl clearstate agent command to delete the files in the state directory.
8.
Restart the Management Agent.
as directed by mnazim (sorry)
http://download.oracle.com/docs/cd/E11857_01/em.111/e16790/ha_agent.htm#BABDFBGA

Oracle 11g Client Installing - invalid entry size

Hello,
I am trying to install the Oracle Linux 11g r2 client (Oracle Database 11g Release 2 Client (11.2.0.1.0) for Linux x86 ) on Fedora 17.
The following was prompted by the installer:
INFO: Number of threads for fast copy :1
INFO: invalid entry size (expected 7100024 but got 7100029 bytes)
SEVERE: oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: invalid entry size (expected 7100024 but got 7100029 bytes)
at oracle.sysman.oii.oiic.OiicInstallAPISession.doOperation(OiicInstallAPISession.java:453)
at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:973)
at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:936)
at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:456)
at oracle.install.driver.oui.SetupJob.call(SetupJob.java:166)
at oracle.install.driver.oui.SetupJob.call(SetupJob.java:47)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
INFO: Update the state machine to STATE_READY
INFO: isSuccessfullInstallation: false
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Shutting down OUISetupDriver.JobExecutorThread
+SEVERE: [FATAL] invalid entry size (expected 7100024 but got 7100029 bytes)+
CAUSE: No additional information available.
ACTION: Refer to the logs or contact Oracle Support Services
SUMMARY:
- invalid entry size (expected 7100024 but got 7100029 bytes).
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:5171
My cksum is correct:
[waldyd@amsimeca ~]$ cksum Downloads/linux_11gR2_client.zip
1997033971 642016988 Downloads/linux_11gR2_client.zip
Any ideas to solve this issue?
Best Regards,
Nestor Waldyd

Hello,
Oracle Database 11g Release 2 Client (11.2.0.1.0) for Linux x86
+ Download linux_11gR2_client.zip (642,016,988 bytes) (cksum - 1997033971)+
Contains the Oracle Client Libraries for Linux.
I downloaded it from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linuxsoft-085393.html
Best Regards,
Nestor Waldyd
Edited by: waldyd on Mar 15, 2013 4:23 PM

Download Oracle DB 11g

Hi all
1. I'd like to know where I can download Oracle DB 11g for my own personal home-training
2. what's the connection between oracle DB 11g and Windows / Linux / UNIX. Could the masters here elaborate?
thanks.

Is Oracle under windows and under LInux different? what are the differences? syntax?
Yes is diffrent in terms of software and how object module created. ie .o files.
1)
In windows relinking of binaries will not happen when you are installing the oracle software
In Linux relinking of binaries will happen when you are installing the oracle software and you can check the installation log.
2) Linux is more fexiable and robust compare to windows ( this will not applicable to as you are using for training purpose)
I'm planning on taking oracle DBA 11g OCA, and hopefully Oracle 11g DBA OCP in the future. Will it be categorized to Oracle Windows 11g DBA OCP and Oracle Linux 11g DBA OCP? thanks.
no, there is only 11g DBA OCP or 11g DBA OCA.
But if you work on linux then you can also write oracle on linux.
if you work on linux then you can use, solaris, hp-ux,hp-IA, etc..
you will became robust
IN OCM (oracle certified master) also you will use linux not windows :)
Kind Regards,
Rakesh Jayappa

Again a Error 500--Internal Server Error

          Hi folks,
          I hope someone can help out. I get a error 500 and the already documented "java.lang.VerifyError:
          (class: jsp_servlet/_cda/_RedArticleDetailFB, method: _jspService signature: (Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V)
          Incompatible object argument for function call
          error while generating a servlet from the following JSP. Maybe I'm to blind or
          the platform is corrupt (WebLogic 5.1, Solaris 2.x, JDK 1.3). Can anyone have
          look at the code and make a suggestion.
          <%--
          $Id$
          --%><%@page import="java.sql.*" contentType="text/html; charset=UTF-8"
          %><jsp:useBean id="articleDetail" scope="request" class="ce.beans.ArticleDetail"
          /><jsp:setProperty name="articleDetail" property="*"
          /><jsp:useBean id="dbcon" scope="request" class="client.beans.DBConnection"
          /><jsp:useBean id="publish" scope="request" class="ce.beans.LayoutTemplate" /><%
          Connection con = null;
          * Load the right articleDetail bean if an existing is to be updated
          if ((!request.getParameter("articleDetailId").equals("0")) && (request.getParameter("articleDetail")
          != null)) {
               try {
                    con = dbcon.getConnection("content");
                    // Load an articleDetail content bean if an update is on progress
                    articleDetail.setId(Long.parseLong(request.getParameter("articleDetailId")));
                    articleDetail.load(con);
                    articleDetail.setArticleId(Long.parseLong(request.getParameter("articleId")));
               } catch (Exception e) {
                    request.setAttribute("errorMsg","Fehler beim Identifizieren des Konfigurationsbeans:
          "+e.getMessage());
               } finally {
               if (con != null) {
               dbcon.freeConnection("content",con);
          } // if articleDetailId
          * Save the ArticleDetail bean to the database, if requested by "mode" parameter.
          if ((request.getParameter("mode") != null) && (request.getParameter("mode").equals("save")))
               try {
                    con = dbcon.getConnection("content");
                    // throws exception while saving without a configured article
                    articleDetail.store(con);
                    // Call the SP to update the content_id in TM01_NAVIGATION_CONTENT
                    publish.updateConfFBContentId(con,Long.parseLong(request.getParameter("lid")),articleDetail.getId());
               } catch (Exception e) {
                    request.setAttribute("errorMsg","Fehler beim Schreiben in die DB, wenden Sie
          sich an den Administrator: "+e.getMessage());
               } finally {
               if (con != null) {
               dbcon.freeConnection("content",con);
          } // if mode
          * Return to the page, defined in the "returnTo" parameter
          if (request.getParameter("returnTo") != null) {
               request.setAttribute("articleDetail",articleDetail);
               request.setAttribute("lid",request.getParameter("lid"));
          pageContext.forward(request.getParameter("returnTo"));
               return;
          } else {
          out.println("Done with save.");
          %><%--
               $Log$
          --%>


Hunk09 wrote:
Hi all
I am using Apex 4.1.1 , linux 11g r2
Classic report
I have a query basic select from where typo with *36-38* unions in thast query
Apex wont let me save the query would report
500 Internal Server Error
System Unavailable. Please try again later.Is there a limit for Maximum length of query string.
when a remove few unions just use 32 union then it work like charm.
pls throw some light on this.
thanksYes, first option is to create view. If it's not possible (you want to use apex session state in aueryetc.) then change report type as "PL/SQL function returning SQL" and create function in DB.
Regards,
Hari

OCI8 on Linux/11g

Similar Messages

Maybe you are looking for