Odd intermitent connection issues. [Solved]

I connect to my internet wirelessly. I created a netctl profile for my wireless by using wifi-menu, then added it to startup using netctl enable profilename. This works fine, apart from intermittently programs will complain that there is no connection, when there is. When I run the program again, it finds a connection. Here is an exmaple with pacman. I was downloading a file during both runs of pacman, and neither time did the download stop. Any suggestions as to what is going on?
samuel@arch:~$ sudo pacman -S ttf-hanazono
resolving dependencies...
looking for inter-conflicts...
Packages (1): ttf-hanazono-20131208-1
Total Download Size: 16.88 MiB
Total Installed Size: 42.23 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
error: failed retrieving file 'ttf-hanazono-20131208-1-any.pkg.tar.xz' from mirror.bytemark.co.uk : Could not resolve host: mirror.bytemark.co.uk
error: failed retrieving file 'ttf-hanazono-20131208-1-any.pkg.tar.xz' from mirror.de.leaseweb.net : Could not resolve host: mirror.de.leaseweb.net
error: failed retrieving file 'ttf-hanazono-20131208-1-any.pkg.tar.xz' from mirror.us.leaseweb.net : Could not resolve host: mirror.us.leaseweb.net
error: failed retrieving file 'ttf-hanazono-20131208-1-any.pkg.tar.xz' from archlinux.polymorf.fr : Could not resolve host: archlinux.polymorf.fr
error: failed retrieving file 'ttf-hanazono-20131208-1-any.pkg.tar.xz' from mirror.nl.leaseweb.net : Could not resolve host: mirror.nl.leaseweb.net
^Cerror: failed retrieving file 'ttf-hanazono-20131208-1-any.pkg.tar.xz' from mirror.chmuri.net : Could not resolve host: mirror.chmuri.net
Interrupt signal received
samuel@arch:~$ sudo pacman -S ttf-hanazono
resolving dependencies...
looking for inter-conflicts...
Packages (1): ttf-hanazono-20131208-1
Total Download Size: 16.88 MiB
Total Installed Size: 42.23 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
ttf-hanazono-20131208-1-any 16.9 MiB 4.51M/s 00:04 [#####################################################################################################################] 100%
(1/1) checking keys in keyring [#####################################################################################################################] 100%
(1/1) checking package integrity [#####################################################################################################################] 100%
(1/1) loading package files [#####################################################################################################################] 100%
(1/1) checking for file conflicts [#####################################################################################################################] 100%
(1/1) checking available disk space [#####################################################################################################################] 100%
(1/1) installing ttf-hanazono [#####################################################################################################################] 100%
Last edited by Handuel (2014-03-31 21:16:22)

Try ping google.com
if this does not work, try ping 8.8.8.8 ... if this works out, maybe you have problems with the hostnames resolution. If so, try adding 8.8.8.8 and 8.8.8.4 as dns server (google). Then there is opendns that can serve you as well.
Last edited by Void_Walker (2014-03-31 15:26:56)

Similar Messages

  • Odd Wifi connection issue

    I have a Curve 8530 that will connect to wi-fi and connect to other hotspots. The problem is the browser insists that it is not connected to a router. This is false.
    I can connect to a site that I have previously been to (roosterteeth.com) and browse the site. I can even go to pages that I have not previously browsed on the site so the connection is there. If I try any other site through the "go to" screen, or the google app, it says that I need to talk to my service provider if I want to connect to it without wi-fi.
    I have tried:
    resetting the connection with the router
    a battery pull
    deleting and reconnecting with the router
    all of these have ended with the same page telling me to call the service provider.
    Is there any solutions before I have to call the provider? I have not had any problem with the wi-fi before.

    Hi and welcome to the forums!
    Try cleaning the browser cache followed by a hard reset of the device.
    Thanks,
    Bifocals
    KB03865 How to clear the BlackBerry Browser cache
    KB02141 How to reset a BlackBerry smartphone
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Recent intermitent connection issues

    We live in an apartment building sharing a cable internet with my mother in law in the apartment right below us. Untill about a week ago, it was working fine. New neighbors, new problems.
    The signal will be excellent, then just drop and flake in and out for a few minutes or a little longer. Ive tried changing channels from 11 (default) to 5 and 6, down to 1. Nothing seems to really help.
    My real question is simply this, would a signal booster help at all? Like a bridge placed in her apartment. Right now she is just using an external USB wireless card.
    The model we have is the WRT54G. We've also tried a Belkin router, same troubles. (kinda rules out firmware upgrades)

    Hi…
    What is the approximate distance between the two apartments?
    To improve the signal strength of your router you need to get a range expander. You can also replace the existing antenna of your router with linksys high gain antenna. The range expander will expand the range of your wireless router.  

  • Logic Remote connectivity issues after updating to iOS 8 (solved!)

    Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
    After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
    Navigate to the following directory on your desktop system running GarageBand:
    ~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
    You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
    ~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
    In the Preferences folder should be a file named "com.apple.garageband10.cs”.
    Make sure GarageBand is not running and delete the  "com.apple.garageband10.cs” file.
    Relaunch GarageBand and see if you should now be able to connect.
    The same can be done for Logic by navigating to:
    ~/Library/Preferences/
    And deleting "com.apple.logic.pro.cs" and restarting Logic.
    Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality)  but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

    Thanks very much!  This solved my connection problem.

  • Airport time capsule Extreme dropping connection issue i have already upgraded new firmware 7.7.3 but problem is still in wifi connectivity drop please solve this issue i have expanded my money in tc drive

    time capsule drop wifi connection issue .I have already upgraded new firmware 7.7.3 but  problem in not solve i am very confuse to resolving this issue.also i attached my log here.
    May 15 11:37:43
    5
    Initialized (firmware 7.7.3).
    May 15 11:37:50
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 11:37:50
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 11:37:50
    5
    Rotated TKIP group key.
    May 15 11:37:51
    5
    Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
    May 15 11:37:54
    5
    Associated with station b8:e8:56:1f:2c:98
    May 15 11:37:54
    5
    Installed unicast CCMP key for supplicant b8:e8:56:1f:2c:98
    May 15 11:38:27
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 11:38:27
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 11:39:14
    5
    Connection accepted from [::ffff:192.168.1.170]:49439.
    May 15 11:40:49
    5
    SMB/CIFS login OK from [email protected].
    May 15 11:43:14
    5
    Connection accepted from [::ffff:192.168.1.170]:49452.
    May 15 11:43:19
    5
    Connection accepted from [::ffff:192.168.1.170]:49454.
    May 15 11:43:20
    5
    Connection accepted from [::ffff:192.168.1.170]:49456.
    May 15 11:43:42
    5
    Disassociated with station b8:e8:56:1f:2c:98
    May 15 11:43:43
    5
    Rotated TKIP group key.
    May 15 11:44:20
    5
    Connection accepted from [::ffff:192.168.1.170]:49460.
    May 15 11:45:21
    5
    SMB/CIFS login OK from [email protected].
    May 15 11:47:33
    5
    Associated with station b8:e8:56:1f:2c:98
    May 15 11:47:33
    5
    Installed unicast CCMP key for supplicant b8:e8:56:1f:2c:98
    May 15 11:47:34
    5
    Disassociated with station b8:e8:56:1f:2c:98
    May 15 11:47:35
    5
    Rotated TKIP group key.
    May 15 11:47:57
    5
    Associated with station e4:92:fb:dc:02:0b
    May 15 11:47:57
    5
    Installed unicast CCMP key for supplicant e4:92:fb:dc:02:0b
    May 15 11:49:25
    5
    SMB/CIFS login OK from [email protected].
    May 15 11:50:37
    5
    Connection accepted from [::ffff:192.168.1.170]:49472.
    May 15 11:50:42
    5
    Connection accepted from [::ffff:192.168.1.170]:49474.
    May 15 11:50:44
    5
    Connection accepted from [::ffff:192.168.1.170]:49476.
    May 15 11:51:18
    5
    SMB/CIFS login OK from [email protected].
    May 15 11:51:25
    5
    SMB/CIFS login OK from [email protected].
    May 15 11:51:53
    5
    Connection accepted from [::ffff:192.168.1.170]:49478.
    May 15 11:53:07
    5
    Idle timeout for station e4:92:fb:dc:02:0b
    May 15 11:53:07
    5
    Disassociating with station e4:92:fb:dc:02:0b (reserved 4).
    May 15 11:53:07
    5
    Disassociated with station e4:92:fb:dc:02:0b
    May 15 11:53:07
    5
    Rotated TKIP group key.
    May 15 11:54:45
    5
    Connection accepted from [::ffff:192.168.1.170]:49497.
    May 15 11:54:52
    5
    Connection accepted from [::ffff:192.168.1.170]:49499.
    May 15 11:54:57
    5
    Connection accepted from [::ffff:192.168.1.170]:49502.
    May 15 11:55:15
    5
    Connection accepted from [::ffff:192.168.1.170]:49504.
    May 15 11:55:24
    5
    Connection accepted from [::ffff:192.168.1.170]:49506.
    May 15 11:55:45
    5
    Connection accepted from [::ffff:192.168.1.170]:49508.
    May 15 12:05:39
    5
    SMB/CIFS login OK from [email protected].
    May 15 12:05:40
    5
    unloading current configuration.
    May 15 12:05:55
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 12:05:55
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 12:05:55
    5
    Rotated TKIP group key.
    May 15 12:05:56
    5
    Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
    May 15 12:06:00
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 12:06:00
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 12:06:45
    5
    Disassociated with station 78:a3:e4:ba:90:42
    May 15 12:06:45
    5
    Rotated TKIP group key.
    May 15 12:07:19
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 12:07:19
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 12:09:15
    5
    Connection accepted from [::ffff:192.168.1.170]:49576.
    May 15 12:09:35
    5
    Connection accepted from [::ffff:192.168.1.170]:49578.
    May 15 12:09:49
    5
    Connection accepted from [::ffff:192.168.1.170]:49580.
    May 15 12:25:40
    5
    Connection accepted from [::ffff:192.168.1.170]:49709.
    May 15 12:25:51
    5
    Connection accepted from [::ffff:192.168.1.170]:49711.
    May 15 12:26:12
    5
    Connection accepted from [::ffff:192.168.1.170]:49717.
    May 15 12:27:40
    5
    Connection accepted from [::ffff:192.168.1.170]:49723.
    May 15 12:27:41
    5
    unloading current configuration.
    May 15 12:27:56
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 12:27:56
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 12:27:56
    5
    Rotated TKIP group key.
    May 15 12:28:00
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 12:28:00
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 12:29:23
    5
    SMB/CIFS login OK from [email protected].
    May 15 12:29:31
    5
    Connection accepted from [::ffff:192.168.1.170]:49730.
    May 15 12:29:31
    5
    Connection accepted from [::ffff:192.168.1.170]:49732.
    May 15 12:34:15
    5
    Connection accepted from [::ffff:192.168.1.170]:49739.
    May 15 12:34:16
    5
    unloading current configuration.
    May 15 12:34:31
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 12:34:31
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 12:34:31
    5
    Rotated TKIP group key.
    May 15 12:34:49
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 12:34:50
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 12:36:07
    5
    Connection accepted from [::ffff:192.168.1.170]:49745.
    May 15 12:36:08
    5
    Connection accepted from [::ffff:192.168.1.170]:49747.
    May 15 12:40:40
    5
    Associated with station 10:68:3f:46:d2:69
    May 15 12:40:41
    1
    WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
    May 15 12:40:41
    5
    Deauthenticating with station 10:68:3f:46:d2:69 (reserved 2).
    May 15 12:40:41
    5
    Disassociated with station 10:68:3f:46:d2:69
    May 15 12:41:48
    5
    Disassociated with station 10:68:3f:46:d2:69
    May 15 12:42:12
    5
    Connection accepted from [::ffff:192.168.1.170]:49759.
    May 15 12:42:13
    5
    unloading current configuration.
    May 15 12:42:28
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 12:42:28
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 12:42:28
    5
    Rotated TKIP group key.
    May 15 12:42:32
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 12:42:32
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 12:44:04
    5
    Connection accepted from [::ffff:192.168.1.170]:49768.
    May 15 12:44:10
    5
    Connection accepted from [::ffff:192.168.1.170]:49771.
    May 15 12:45:03
    5
    Connection accepted from [::ffff:192.168.1.170]:49773.
    May 15 12:45:03
    5
    unloading current configuration.
    May 15 12:45:18
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 12:45:18
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 12:45:18
    5
    Rotated TKIP group key.
    May 15 12:45:23
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 12:45:23
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 12:46:23
    5
    Associated with station e4:92:fb:dc:02:0b
    May 15 12:46:24
    5
    Installed unicast CCMP key for supplicant e4:92:fb:dc:02:0b
    May 15 12:46:43
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:46:43
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:46:58
    5
    Connection accepted from [::ffff:192.168.1.170]:49780.
    May 15 12:47:02
    5
    Connection accepted from [::ffff:192.168.1.170]:49782.
    May 15 12:47:05
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:47:05
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:47:13
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:47:14
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:47:27
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:47:30
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:47:39
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:47:40
    5
    Rotated TKIP group key.
    May 15 12:47:44
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:47:44
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:49:07
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:49:07
    5
    Rotated TKIP group key.
    May 15 12:49:13
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:49:13
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:51:19
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:20
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:20
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:51:26
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:30
    5
    Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
    May 15 12:51:30
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:51:31
    5
    Rotated TKIP group key.
    May 15 12:51:31
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:31
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:51:34
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:38
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:40
    5
    Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
    May 15 12:51:40
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:51:40
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:41
    5
    Rotated TKIP group key.
    May 15 12:51:42
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:42
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:51:47
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:49
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:49
    5
    Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
    May 15 12:51:55
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:57
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:51:59
    5
    Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
    May 15 12:51:59
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:51:59
    5
    Rotated TKIP group key.
    May 15 12:52:05
    5
    Associated with station 24:fd:52:d0:3c:50
    May 15 12:52:09
    5
    Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
    May 15 12:52:09
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:52:20
    5
    Disassociated with station 24:fd:52:d0:3c:50
    May 15 12:59:22
    5
    Connection accepted from [::ffff:192.168.1.170]:49810.
    May 15 12:59:22
    5
    Connection accepted from [::ffff:192.168.1.170]:49812.
    May 15 13:00:07
    5
    Connection accepted from [::ffff:192.168.1.170]:49817.
    May 15 13:00:07
    5
    unloading current configuration.
    May 15 13:00:22
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 13:00:22
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 13:00:22
    5
    Rotated TKIP group key.
    May 15 13:00:35
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 13:00:35
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 13:02:00
    5
    Connection accepted from [::ffff:192.168.1.170]:49826.
    May 15 13:02:00
    5
    Connection accepted from [::ffff:192.168.1.170]:49828.
    May 15 13:03:14
    5
    Connection accepted from [::ffff:192.168.1.170]:49832.
    May 15 13:03:15
    5
    unloading current configuration.
    May 15 13:03:31
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 13:03:31
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 13:03:31
    5
    Rotated TKIP group key.
    May 15 13:04:03
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 13:04:03
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 13:05:07
    5
    Connection accepted from [::ffff:192.168.1.170]:49843.
    May 15 13:05:07
    5
    Connection accepted from [::ffff:192.168.1.170]:49845.
    May 15 13:06:15
    5
    Connection accepted from [::ffff:192.168.1.170]:49848.
    May 15 13:06:16
    5
    unloading current configuration.
    May 15 13:06:31
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    May 15 13:06:31
    5
    Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    May 15 13:06:31
    5
    Rotated TKIP group key.
    May 15 13:07:04
    5
    Associated with station 78:a3:e4:ba:90:42
    May 15 13:07:04
    5
    Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
    May 15 13:08:08
    5
    Connection accepted from [::ffff:192.168.1.170]:49854.
    May 15 13:08:09
    5
    Connection accepted from [::ffff:192.168.1.170]:49856.
    May 15 13:08:20
    5
    Connection accepted from [::ffff:192.168.1.170]:49858.
    May 15 13:12:31
    5
    unloading current configuration.
    May 15 13:32:36
    1
    WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
    May 15 13:32:57
    1
    WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
    May 15 13:33:09
    1
    WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
    May 15 13:33:22
    1
    WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
    May 15 13:33:33
    1
    WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
    May 15 15:21:21
    1
    WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
    May 15 15:21:26
    1
    WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
    May 15 15:21:41
    1
    WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client

    It says you have the wrong password.
    WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
    Reset the TC to factory and start again.
    But do not be surprised if the v5 utility no longer works to do the setup.

  • HotSync connection issue with Palm Treo 800w Sprint work around Solved !!!

    I just switched from my Treo Palm Treo 755p to the The Palm Treo  800w. For the life of me I couldn't figure out why though everything was connected via USB. The Microsoft ActiveSync would work once or twice then nothing . Though I knew it was connected the charge wouldn't work either.
    Here is my work around and it never fails.
    If you see the Red light or Green light on your phone while connected Via the USB that means you are connected you can sync and charge.
    If you don't see the red/green light on or see the phone in My computer > Mobile devices.
    Plug your phone in via the USB. While it's plugged in take the battery out . Then put the battery back in. You know you are good when you see the red light or green light  turn on. Red light means charging Green light means its fully charged.
    I have connected every time using the take out the battery method and my Treo 800w charges / Microsoft syncs the works!!
    Hope this helps I tried everything before I figured this out.
    Post relates to: Treo 800w (Sprint)

    Did you install the 800W update that is available on the support page under downloads? There is a download for the charging issue and the USB connection issue.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=treo&mn=800w&cn=sprint
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
    Post relates to: Palm i705

  • Mac Mini Ethernet SSL connection issues

    Hi,
    Up until recently I have been using my Late 2012 Mac mini with a WiFi connection. Recently though I've had reason to switch to a Gigabit Ethernet connection (short version, moved from UK to Canada, living with in-laws and they have a crappy wireless router that can't hold a stable connection for more than a few hours).
    However, I'm getting a really odd Ethernet network issue where my mac will "corrupt" SSL connections. This normally manifests itself in web pages not fully downloading, images becoming corrupted, or errors when downloading files. The last one is particularly hurting as I have been doing some heavy downloading of DMG files and other installers, all of which are a 100% guaranteed fail with DMG files reporting as being corrupted if I try to open them.
    I have also lost my time machine backup as OSX has reported that this has failed verification and needs to be created new; I accepted creating a new one (reluctantly) and the backup now fails to complete every time it runs - either the wireless cuts out or the SSL connection corrupts the backup.
    I have a 16-port GigE Switch (Netgear GS116) with a number of computers and the home modem plugged into this.
    I've tried the following to look at this:
    I've tried (and tested) a number of different Cat5e and Cat6 cables. These all work fine with other Windows / Linux machines and according to my cable tester all check out. 100% of the cables I own produce the error leading me to believe that it's not a cable problem.
    Problem occurs even if the switch is bypassed and the mac plugged directly into the modem.
    Problem does not occur (for web pages and small downloads) when plugged into wireless - this is just sloooow and as the router seems to develop issues with DNS over WiFi, I have to reset it every few hours so long term downloads fail.
    I found an article (which I have now lost the URL for) where someone suffered intermittent network issues with Ethernet that they resolved by un-checking the "Enable automatic connection" on the 802.1X page of the network settings. This appeared to help for a couple of days and I enjoyed fast Ethernet and downloads once more. However, today the problem is back in force.
    I am able to download files from a windows machine (well, except for downloads via the App store) and then transfer them over the network to the mini with no problems at all - the corruption issue only seems to occur when SSL is involved.
    So I'm wondering what it could be and how I would go about diagnosing the issue. I'm more familiar with Windows / Linux systems, having not owned a Mac since the days of System 7 - the mini was bought so I could play with learning XCode and try my hand at Mac software development.
    Thanks in advance,
    ~MrBasset.
    Machine specs:
    Late 2012 Mac Mini running OXS Mavericks 10.9.3
    2.5Ghz Intel Core i5
    16GB Ram

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Frustratin​g mix of OSX connection issues

    Bought the M127fw and have had an endless stream of connection issues with my iMacs and Airport network.
    it did at first connect to my wireless network.  But found almost immediately that trying to get it to "wake up" and be seen on the network for printing never worked.  I had to go to it, reset it (pressing the white lighted button on the side of the display) for any of my computers to see it again.
    Then it suddenly stopped connecting to the same wireless network it had been connected to.  I've tried 100's of time to get this connection to work.  Oddly, it will connect to the same Airport's secondary network I have set up for guests.  But it will not connect to the main one. (yes, both are set up with the same security settings).
    So, then trying to wire it to the Airport and using it as a WPA printer.  That works, but then I can't use it for a scanner.
    My questions
    1) any suggestions for solving for the inability to connect to my wireless
    2) If I solve that, any work around for the devices, "waking up" issue mentioned above
    3) Is there a way to use the scanner via it being connected to my Airport via USB?
    thank you.

    This is certainly odd.  I suspect there may be a setting in your Airport that is wonky, especially if the guest network works.
    Open Airport Utility and in the Wireless tab, click Wireless Options.  Check to make sure that 802.11g is enabled (along with other modes is fine).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • X1 Carbon (20AX series) wifi connectivity issues

    Dear Lenovo Support and all others,
    I am posting this in hope that someone can help with my problem and also to share my unpleasant experience with a new Lenovo product.
    Lenovo Thinkpad X1 Carbon
    Model: 20A8A00VSG
    OS: Windows 7 Pro 64bit
    Purchase date: 27th February 2014
    Since the first day I purchased the system, I have been having an issue with my wireless connection:
    1. I am unable to reliably get a wireless connection to wireless access points (e.g. free wifi coffee outlets or malls) and personal mobile hotspots (mobile phone hotspots). It constantly says "LIMITED CONNECTIVITY". In other words, I cannot get internet access. Even when it does connect to the network and get internet access, there is a tendency for the connection to drop back to "LIMITED CONNECTIVITY".
    The only time I can get a reliable connection is when I am connected to my home wireless router. The system does not seem to have problems on home wifi networks. Since the problem seems limited to wireless access points and hotspots, I believe its a hardware/software problem.
    Please note that I have other  wireless devices (laptops and mobile phones) that can connect to the same networks that I am trying to connect to and have no issues.
    I have tested the networks with my friends' wireless devices as well and they have no issues accessing the internet so I am fairly certain that there is no issue with the networks themselves.
    2. I have already called in twice and been given advice on both occasions but the problem still persist. I have updated all drivers, uninstalled and reinstalled and updated the BIOS for the system and also performed a system recovery but nothing has worked so far.
    I have also tried disabling and/or deleting any anti-virus software and firewalls but it does not fix the problem.
    I have also been advised that I need to go down to the Lenovo service center to have my laptop checked out by the technicians and that there MIGHT be a firmware upgrade for the wireless card itself.
    NOTE: MIGHT? The support staff doesn't even know for sure whether there is an upgrade available.
    3. Rebooting my computer, the wireless card or the hotspots does not solve the problem. It might work for a shortwhile before it reverts back to it's non working state or stops working again once I reboot the system.
    I am really unhappy with the purchase so far. It's actually a good laptop per se when all is working, but without internet access, it is pretty much like a dead fish. And thats 90% of the time.
    Like I said, this problem has been happening since day one and I've tolerated it long enough.
    I hope someone can help me with this problem.
    Thanks all.
    UPDATE - 3/24/2014
    I borrowed an ASUS Wireless USB adapter from a friend and installed it on the laptop. Lo and behold there are no connectivity issues to my iPhone wireless hotspot.
    INTEL DUAL BAND WIRELESS AC 7260 - NO CONNECTION/LIMITED ACCESS
    ASUS USB N10 WIRELESS ADAPTOR - CONNECTIVITY AND INTERNET ACCESS
    I think this narrows it down to the software/hardware in the computer....

    Hi, all
    there is an issue bugged driver or even card firmware related. Intel confirmed that. Wait some time for the new release.
    For the test purpose only disable 2,4 ghz band support and switch to 5 ghz. N-band seems unstable so switch to G-band. As the Linux users report the same issue it's firmware bug basically.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Multiple Internet Connection Issues

    Hi there, long time reader first time poster.
    I figured I should post this as, while having read through hundreds of similar posts I still can't figure out how to solve my connectivity issues.
    I just bought a new iMac 21.5 inch 3.2Ghz i3 model and while I am happy with the machine overall, it is the second one in a month - the first had a faulty ethernet port and refused to connect to the internet out of the box. Apple replaced it without question - almost as if they knew.
    The replacement has now seemingly developed the same issue.
    Some background info. The computer was connected both through ethernet and through the TC I bought to back it up until yesterday. So I was getting both a wireless signal from the TC and one through ethernet.
    I have a hub that has 5 devices connected to it ( Printer, Cable TV, iMac and TC - now a PS3 ) That hub is served a signal by a simple NTT modem connected to a phone line. That modem is now nearly 5 years old but has always given great net speeds so I don't believe the problem to be the modem - I could be wrong though.
    I just bought a PS3 and tried connecting it yesterday but had multiple problems. Despite me entering the correct PPPoE information to the letter, the PS3 refused to connect, saying the password and username was incorrect. I could connect it via a Bluetooth signal but no hard wired connection would work.
    So I unplugged everything from the hub, shut down all the machines, turned off the modem and let it sit for 10 minutes and then plugged the ethernet cable from the PS3 straight into the modem, giving it a direct line. Switched on modem, rebooted PS3 and tried again - this time it connected through ethernet. I still don't know how or why. I can guess but I'm sure you guys know much more about this than I do.
    So then I tried connecting the iMac back to the net, reconnected all the hub, followed the same procedure. Off, sit for a bit, on etc. This time the PS3 has no connection and now the iMac has no connection either!
    The TC gave a green light though so I was able to get wireless. I tried removing all net locations from the iMac, installing new ones, renewed the DHCP lease, but no matter what I did (PPPoE info 100% correct) it just refused to establish a connection.
    The the bloody TC light flashed amber and I couldn't get wireless either despite being plugged into the hub and getting a signal! The PS3 is now working and the cable is fine so I am starting to think either I have cluster ****** the whole setup or something is wrong with the iMac.
    I go away for an hour then come back and the stupid TC has somehow picked up a connection! The light is green again?! But now the time connected display is scrolling repeatedly. I've got net but what the **** is wrong with all this?
    Bottom line - not ethernet connection for the iMac but TC seems to be working and all other devices have a connection.
    Please help me if you can! I just can't figure any of this out.
    Message was edited by: Zildog
    Message was edited by: Zildog

    Your description is a bit confusing, but I use English as a second language, so it may be just me.
    1. How is the hub connecting to your modem, by ethernet cable or wirelessly?
    2. Which device is negotiating the internet connection with your ISP, the modem?
    3. Does the device that negotiates the connection use PPPoE?
    4. How are the other devices being handed their internet connection? DHCP only?
    Only one device should be connecting directly to your ISP using the PPPoE protocol and configured with your account username and password. This device is preferably the modem. This device should be configured to hand out internal IP addresses to the other devices on your LAN using DHCP. All of the other devices should be configured to request an IP from that device, whether by ethernet or wi-fi, just with DHCP.
    Dah•veed

  • Found a fix for iTunes 10.6.1 store and connection issues

    Been having trouble for months not being able to connect to the store and then after the most recent update couldn't even connect to the internet to import a physical CD (wouldn't connect to Gracenotes), import purchases I made on my phone or even to check for iTunes updaes.  After reading some other posts about the winsocket concerns I ran a diagnostic and found a real player file called speedster used to enhance download speed using the winsocket.  I just uninstalled realplayer (I did have real player plus btw) and BAM all issues with iTunes were fixed.  Opened iTunes, store loaded and all my purchases from my iphone and ipod touch started downloading.  Simple, but ridiculous it caused that much trouble and not been an update to fix it yet seeing months of problems out there.

    Ha! Issue solved. The track not showing the arrows was a PDF in iTunes. All is well.

  • BT Connection Issue

    I've recently moved home and have transferred my BT connection, however I cannot get a broadband connection.
    I've tried both the BT homehub (HH3) and my original router (Netlink) and neither can connect. I've changed the cable connecting the filter to the router and different ADSL filters.
    I've gone through the connection issue checklist and have checked the line using the online option (no fault detected). There are no faults detected in my area and I do not use McAfee.
    I've tried both my original username and password and the default one.
    The broadband helpline number (0800 111 4567) just leads me in circles, referring me back to the order confirmation menu (order completed on the 23rd).
    Is there something obvious I'm missing, or do I need to try harder to get hold of BT?
    Solved!
    Go to Solution.

    It does sound like an authentication or misconfiguratuion somewhere, but there is nothing I can do as BT customer.
    If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to find the problem.
    They can be contacted using this link BT Care Team
    They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Oracle RDB driver – Version 3.01.00.01 Connectivity Issue

    I have a SQL Server 2000 extended stored procedure connecting to an Oracle RDB data server via an ODBC connection (using Oracle RDB driver – Version 3.01.00.01). The SQL Server 2000 runs on a Windows 2000 Server.
    This extended stored procedure opens up multiple database connections and maintains them for processing. Usually, everything runs fine.
    However, every so often, we have connectivity issues. What happens is as follows:
    When we bring a station down and then try to reconnnect, our connection is denied, and we get the error: "recv() unexpected close Ret 0 Err#0 UNKNOWN Unknown WINSOCK Error 0". (This error is logged by the .dll running in the SQL Server processing space.) From the first time we receive a connectivity error like this until the Oracle RDB box is rebooted, we cannot establish another new ODBC connection to that Oracle RDB box --- whether we are trying to establish it programmatically or just via a "test connection" in the ODBC dialogue on the SQL Server box.
    We can, however, establish an ODBC connection to another, identically configured, Oracle RDB box from the SQL Server box (without restarting the SQL Server box).
    Has anyone had experience with instable connections from Windows system using the Oracle RDB driver to connect to the Oracle RDB? If not, can anyone point me in a direction that would help me research this? I am more familiar with SQL Server than Oracle, and the Oracle DBA on the other end isn't very accessible.
    I'd really appreciate any help anyone can give me.
    Thanks!

    I got same error.. Are you already solve that problem? how? please help me. Thanks

  • HP Slate 21 Pro: WiFi connection issues

    Hi,
    I recently ordered two HP Slate 21 Pro devices. Unfortunately, both of them have WiFi connection issues. After some time the properly configured WiFi connection will be dropped, which results in connectionless devices. The WiFi AP is disabled after this, and so a timed reconnect will not succeed.
    After inspecting the Logcat I found following lines:
    12-05 08:56:58.939 V/EthernetStateTracker(675): report interface is up for eth0
    12-05 08:56:58.939 I/EthernetStateTracker(675): interface up event, kick off connection request
    12-05 08:56:58.939 I/EthernetStateTracker(675): interface up but ethernet is disabled, stop this interface
    12-05 08:56:58.939 I/EthernetStateTracker(675): stop dhcp and interface
    12-05 08:56:58.947 V/EthernetStateTracker(675): report interface is up for eth0
    12-05 08:56:58.948 I/EthernetStateTracker(675): interface up event, kick off connection request
    12-05 08:56:58.948 I/EthernetStateTracker(675): interface up but ethernet is disabled, stop this interface
    12-05 08:56:58.954 I/EthernetStateTracker(675): report new state DISCONNECTED on dev eth0
    12-05 08:56:58.954 V/EthernetStateTracker(675): update network state tracker
    12-05 08:56:58.954 V/EthernetStateTracker(675): Ethernet is disabled, ignore state change event
    12-05 08:56:59.080 D/ConnectivityService(675): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
    12-05 08:56:59.080 D/ConnectivityService(675): Attempting to switch to BLUETOOTH_TETHER
    12-05 08:56:59.080 V/EthernetStateTracker(675): reconnect +++
    12-05 08:56:59.080 D/ConnectivityService(675): Attempting to switch to ETHERNET
    12-05 08:56:59.094 D/ConnectivityService(675): resetConnections(wlan0, 3)
    12-05 08:56:59.201 I/EthernetStateTracker(675): stop dhcp and interface
    12-05 08:56:59.208 D/Nat464Xlat(675): requiresClat: netType=1, hasIPv4Address=false
    12-05 08:56:59.208 D/ConnectivityService(675): handleInetConditionChange: no active default network - ignore
     Especially this line:
    12-05 08:56:59.080 D/ConnectivityService(675): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
    Is this issue already known? Has someone a solution for me?
    Thanks in advance,
    Christian

    That really shouldn't affect it.
    I'm a little stumped because I haven't seen this issue with this device before. The only similar issue I found was this, and it's unresolved.
    Have you tried doing a hard reboot of the Slate 21? 
    I work on behalf of HP (But this isn't my job)
    Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
    Please give me Kudos if I wrote something that helped you.

  • Fed up with speed and connection issues since exch...

    Last Monday BT done some upgrade work at our local exchange.  From that point onwards we have had speed and connection issues.
    I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension.  But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
    We live in the countrside so broadband speeds are not great in any case.  About 1.8 mg I guess but we have always had no problems.  It was good enough for us and we could watch Iplayer.
    I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed.  He made some calls and was told our band width had been capped.  He had that removed and yesterday evening speed was a bit better.
    Today just as bad again.
    Details from router:
    Date/Time          January 25 2012 , 21 : 14 : 25       
    Version Info      
    Runtime Code version   F5D7633-4Av1_UK_1.00.009
    Boot Code Version          1.0.37-5.15
    Hardware Version           V1.0J3
    ADSL Modem Code Version        A2pB015c6
    ADSL     
    Type     
    Status   No Defect
                    Downstream      Upstream
    Data rate             287         440
    Noise margin     32.3        18.6
    Output power   14.8        12.7
    Attenuation       58.5      28.9
    Figures from speedtester BT
    Download speed: 180  Kps
    acceptable range speeds is 100 - 250 Kps
    DSL  Connection rate 286 Kps (DOWN_STREAM)  440Kps (UP_STREAM)
    Upstream Test
    Upload Speed 346 kps
    Upstream Profile 440Kps
    Any help would be appreciated
    Solved!
    Go to Solution.

    Hi Welcome to the forums
    Your high noise margin  will have a major impact  on your speed 
    If you post the full stats from your router
    For homehub – type 192.168.1.254 into your browser
    Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
    Click on More Details and then post the full results.
    also post the full results from http://speedtester.bt.com/
    Have you tried connecting to the test socket at the rear of the master socket
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
    Then someone here may be able to help and offer more advice.
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Maybe you are looking for

  • BAPI_PR_CHANGE (Not Able to insert more than 3 Line Items)

    Hi Friends, I have Issue with BAPI_PR_CHANGE. I could Able to insert up to 3 lines items using this BAPI but if I am Trying to Insert More Than 3 BAPI throwing Dump. Any Idea on this? Any Parameter I need to pass for more than 3 line items. Let me kn

  • BAPI_PO_CREATE1 condition type are creating duplicate records

    Hello Experts, Currently I am creating Purchase orders using BAPI_PO_CREATE1 . When I am passing Condition related records to the same BAPI , second line item onwards , it creates multiple records of same condition type . I have also looked into thre

  • Network Latency

    I've been working with VMWare on an issue with our system, and after looking through the logs, they found that some of the heartbeat packets from the ESXi hosts to the vCenter VM are getting lost. They suggested that our network was not enough to han

  • Select Statement for Varray columns

    Hi all, How should my select statment look like,if i want to see my data as following: I am using oracle version 9.2.0.8 std_id std_name name teacher 100 raghu shekar telugu 101 tedla prabhakar hindi 101 tedla das science 101 tedla thomas social 101

  • JDK6 And ClassNotFound Exception during RMI server start

    Hello, I have been write a simple Hello World RMI, but I'm unable to start the server always get this exeception: Server exception: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:      java.rmi.UnmarshalExcep