(OEL 4.7) -bash: sqlplus: command not found after install of 10g R2
Hi all
I'm new to Linux and I would like your help and directions on a few things:
After 2 days of battle with RPM's (i386 vs x86_64) i was finally able to install 10g R2 on OEL 4.7 x86_64 system without any errors.
please check if all these settings are correct and help me how to start sqlplus? or create a database with dbca
I followed all the directions in Doc ID: 339510.1.
During installation i choose this path as the ORACLE_HOME
/u01/app/oracle/product/10.2.0/
I did not however installed the default database.
I then ran the two scripts at the end of the installation as root.
Here are my settings:
oracle bash_profile:
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
:q
ORACLE_BASE=/u01/app/oracle
export ORACLE_BASE
ORACLE_HOME=/product/10.2.0/db_1;
export ORACLE_HOME
export PATH=$ORACLE_HOME/bin:$PATH
here is my oracle env result
[oracle@nycoralp01 /]$ env | grep -i ORACLE
OLDPWD=/home/oracle/oraInventory
USER=oracle
ORACLE_BASE=/u01/app/oracle
MAIL=/var/spool/mail/oracle
PATH=/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
HOME=/home/oracle
LOGNAME=oracle
ORACLE_HOME=/product/10.2.0/db_1
here is my echo $ORACLE_HOME result:
[oracle@nycoralp01 /]$ echo $ORACLE_HOME
/product/10.2.0/db_1
Can someone please tell me what did i miss or did not set?
When i try to run sqlplus i get this error
[oracle@nycoralp01 /]$ sqlplus
-bash: sqlplus: command not found
Any help appreciated
I change it in my bash_profile
$ vi ~oracle/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
:q
ORACLE_BASE=/u01/app/oracle
export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1;
export ORACLE_HOME
export PATH=$ORACLE_HOME/bin:$PATH
and i'm still getting the same error
-bash: sqlplus: command not found
Is there anything else i'm missing? do i have to restart anything?
Similar Messages
-
ORACLE_HOME disappeared, SQLPLUS - bash: sqlplus: command not found
OK, I am a newbie but am having real difficulty with my 10G DB which I had set up on Unix Solaris box but someone was messing around with it and now I can't see ORACLE_HOME, ORACLE_BASE and ORACLE_SID, they all return blank when I try to "echo" each.
I realise I should have originally set it in Bash_profile, but is now too late.
So how do I set them back up, I cannot get SQLPLUS / AS SYSDBA.........bash: sqlplus: command not found
I have tried to reset and export but still doesn't work.
I got the ORACLE_BASE as:
training:/export/home/training/product/10.2.0/Db_1:N
but can't seem to set the three variables to run SQLPLUS, any ideas what I am doing wrong?
Tried messing around to reset but nothing works, this is the present state of affairs:
env
SSH_TTY=/dev/pts/3
USER=training
ORACLE_SID=training
ORACLE_BASE=/oracle/app
PATH=/usr/sbin:/usr/bin
PWD=/export/home/training/product/10.2.0/Db_1/bin
TZ=Eire
PS1=\e[33m\h\e[31m-\u-\e[33m\W/\e[31m-$\e[32m
SHLVL=3
HOME=/export/home/training
LOGNAME=training
ORACLE_HOME=/oracle/app/product/10.2.0
Can someone help me, really need a step by step guide to set these back up properly.
Thanksjust retyped the last one correctly:
find / -name sqlplus -ls
find: cannot read dir /var/lib/gdm: Permission denied
find: cannot read dir /var/lib/log/gdm: Permission denied
find: cannot read dir /var/mysql: Permission denied
find: cannot read dir /var/dt/sdtlogin: Permission denied
find: cannot read dir /var/core: Permission denied
find: cannot read dir /var/run/smc898: Permission denied
find: cannot read dir /var/spool/clientmqueue: Permission denied
find: cannot read dir /var/spool/mqueue: Permission denied
find: cannot read dir /var/fm/fmd/rsrc: Permission denied
find: cannot read dir /var/fm/fmd/ckpt: Permission denied
find: cannot read dir /var/fm/fmd/xprt: Permission denied
find: cannot read dir /var/postgres/8.2/data: Permission denied
find: cannot read dir /var/postgres/8.2/backups: Permission denied
find: cannot read dir /var/sma_snmp: Permission denied
find: cannot read dir /var/tmp/gconfd-root: Permission denied
find: cannot read dir /var/tmp/orbit-root: Permission denied
find: cannot read dir /var/krb5/rcache/root: Permission denied
find: cannot read dir /var/opt/SUNWjass/run/20091012152456: Permission denied
find: cannot read dir /.gconf: Permission denied
find: cannot read dir /opt/SUNWlwact/misc/: Permission denied
find: cannot read dir /opt/SUNWlwact/sdk/: Permission denied
find: cannot read dir /opt/SUNWlwact/xsl/: Permission denied
find: cannot read dir /opt/SUNWlwact/svc/: Permission denied
find: cannot read dir /opt/SUNWlwact/man/: Permission denied
find: cannot read dir /.sunw: Permission denied
199411 1 -rw-r--r-- 1 training other 0 Jan 14 23:12 /export/home/training/sqlplus
172460 2 drwxr-x--- 9 training other 9 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/sqlplus
188055 10 -rwxr-x--x 1 training other 8776 Oct 27 18:00 /export/home/training/product/10.2.0/Db_1/bin/sqlplus
184787 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/inventory/Templates/sqlplus
184842 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/oc4j/j2ee/oc4j_applications/applications/isqlplus/isqlplus/WEB-INF/classes/oracle/sqlplus
find: cannot read dir /root: Permission denied
find: cannot read dir /proc/227: Permission denied
find: cannot read dir /proc/832: Permission denied
find: cannot read dir /proc/835: Permission denied
find: cannot read dir /proc/458: Permission denied
find: cannot read dir /proc/381: Permission denied
find: cannot read dir /proc/624: Permission denied
find: cannot read dir /proc/818: Permission denied
find: cannot read dir /proc/2221: Permission denied
find: cannot read dir /proc/290: Permission denied
find: cannot read dir /proc/1166: Permission denied
find: cannot read dir /proc/273: Permission denied
find: cannot read dir /proc/229: Permission denied
find: cannot read dir /proc/225: Permission denied
find: cannot read dir /proc/478: Permission denied
find: cannot read dir /proc/445: Permission denied
find: cannot read dir /proc/815: Permission denied
find: cannot read dir /proc/410: Permission denied
find: cannot read dir /proc/432: Permission denied
find: cannot read dir /proc/440: Permission denied
find: cannot read dir /proc/427: Permission denied
find: cannot read dir /proc/352: Permission denied
find: cannot read dir /proc/443: Permission denied
find: cannot read dir /proc/1352: Permission denied
find: cannot read dir /proc/406: Permission denied
find: cannot read dir /proc/2353: Permission denied
find: cannot read dir /proc/670: Permission denied
find: cannot read dir /proc/667: Permission denied
find: cannot read dir /proc/405: Permission denied
find: cannot read dir /proc/213: Permission denied
find: cannot read dir /proc/16953: Permission denied
find: cannot read dir /proc/1146: Permission denied
find: cannot read dir /proc/2580: Permission denied
find: cannot read dir /proc/27831: Permission denied
find: cannot read dir /proc/444: Permission denied
find: cannot read dir /proc/1338: Permission denied
find: cannot read dir /proc/1350: Permission denied
find: cannot read dir /usr/lib/cc-cfw: Permission denied
find: cannot read dir /usr/aset: Permission denied
find: cannot read dir /.gconfd: Permission denied
find: cannot read dir /etc/flash/precreation: Permission denied
find: cannot read dir /etc/flash/preexit: Permission denied
find: cannot read dir /etc/flash/postcreation: Permission denied
find: cannot read dir /etc/inet/secret: Permission denied
find: cannot read dir /etc/apache/ssl.key: Permission denied
find: cannot read dir /etc/sfw/openssl/private: Permission denied
find: cannot read dir /etc/sfw/private: Permission denied
find: cannot read dir /etc/webmin: Permission denied
Looks a bit better:
199411 1 -rw-r--r-- 1 training other 0 Jan 14 23:12 /export/home/training/sqlplus
172460 2 drwxr-x--- 9 training other 9 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/sqlplus
188055 10 -rwxr-x--x 1 training other 8776 Oct 27 18:00 /export/home/training/product/10.2.0/Db_1/bin/sqlplus
184787 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/inventory/Templates/sqlplus
184842 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/oc4j/j2ee/oc4j_applications/applications/isqlplus
How to I run the sqlplus? -
Bash: SQLPLUS: Command not found
Hi All,
I'm facing problem during connecting to SQLPLUS in Linux Plateform Redhat 4.....whenever I write SQLPLUS, it gives me the following Error message
Bash: Sqlplus: Command not found.
kindly let me know, how can I get rid of this Error. Thanks
Regards,
ImranYour environmentals are not setup.
From the command prompt source oraenv
~> . oraenv
or (depending on your os )
~> source oraenv
Respond to the prompt with the name of your database exactly (uppercase/lowercase) as it is in the oratab file (/etc/oratab ?)
This will set your ORACLE_HOME, ORACLE_SID, and PATH variables correctly for your database.
Try sqlplus again and see if that does not work for you. -
-bash: sqlplus: command not found / Oracle file permissons
Hi,
I am running Oracle EE 10.2.0.1.0, on a RHEL 4-U2 server.
When I try to use sqlplus from a non dba account I get the following error:
[pemarten@orclserv ~]$ sqlplus pemarten/mypassword
-bash: sqlplus: command not foundAll my environment variables are set and $ORACLE_HOME/bin has been added to the PATH.
The problem seems to be that the file permissions of the oracle flexible architecture are wrong:
[oracle@orclserv 10.2.0]$ pwd
/u01/app/oracle/product/10.2.0
[oracle@orclserv 10.2.0]$ ls -l
totaal 8
drwx--x--- 56 oracle oinstall 4096 dec 12 14:15 db_1
drwxr-x--- 46 oracle oinstall 4096 dec 12 14:14 htmldbThe permission of the db_1 directory is to strict (should be at least chmod 711 I think)
On my other test server (DB version 10.1) the permissions are:
[oracle@locserv 10.1.0]$ pwd
/u01/app/oracle/product/10.1.0
[oracle@locserv 10.1.0]$ ls -l
total 4
drwxr-xr-x 53 oracle oinstall 4096 Oct 12 02:54 db1So I have tried to chmod the directories to at least 711 up to the sqlplus binary, but when I try to execute sqlplus after that I get the following error:
[pemarten@orclserv ~]$ sqlplus pemarten/mypassword
sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directorySo this doesn't seem to be an option. My biggest concern is why are the file permissons wrong after installation?
Before installing the oracle software umask 022 was added to the .bash_profile of the oracle user (used to install the software)
Has anyone experienced similar problems?
Does anyone knows how to solve this?
Thank You.
PieterIvan,
Thanks for your reply.
I have changed the file permissions of +- 5 files in the lib directory, every time that I changed the permission of 1 file, I got an error for another one.
Now I am getting the following error
[pemarten@orclserv ~]$ sqlplus pemarten/mypassword
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properlyAccording to oerr there are still lib files with wrong permissions...
What I would like to know is :
1) Are the file permissions changed in 10.2 (only DBA's can use sqlplus on the database server) ? If not I probably did something wrong and I will do a reinstall
2) Can anyone who has version 10.2 installed post an ls -l of his $ORACLE_HOME directory please, so I can compare the file permissions ?
Thank You,
Pieter -
Lircd: command not found after install of lirc
Hi!
I've had some problems with lirc and had to uninstall it from my system. I also deleted
the files named lirc* after I uninstalled. I then cleaned the pacman cache and reinstalled
lirc.
I did this in a hope of getting a complete reinstall of lirc. The installation went fine, but my
system doesn't seem to see that lirc has been reinstalled. When I do #lircd (which used to
start lircd) I get #bash: lircd: command not found
I've tried to reinstall several more times by #pacman -S lirc and it runs through the installation.
I still get #bash: lircd: command not found though.
What am I doing wrong? Why won't lirc go back to working like it should do after reinstallation??azleifel wrote:
The lircd daemon expects to be run at startup and needs root permissions because it will create device nodes in /dev. Try "man lircd" for more information.
To run lircd at startup, add it to the DAEMONS line in /etc/rc.conf. If needed, add any necessary kernel module to the MODULES line of /etc/rc.conf while you're there. As an example, I have MODULES=(lirc-mceusb2) for my trusty Microsoft MCE remote control and DAEMONS=(@lircd).
That did it!! Thanks.
I spent hours and hours yesterday trying to figure out how to autostart lircd. Now everything works.
When I try #irw every button I push is mapped with the right name and function. But in Freevo things are not that smooth. It seems
freevo only understands a few of the buttons.
I've seen that in myth there's a config file (or something) that seems to map out the remote functions in relation to myth itself. Do I
need a similar config file for freevo?
EDIT: nwm... I found out that yes, I do.
Last edited by Perre (2008-04-13 10:59:09) -
Hi All,
OS : Solaris
Oracle Version : 10.1.0.2.0
When i am trying to connect to database by typing sqlplus
i am getting error
-bash: sqlplus: command not found
previously when i connect like that i am able to connect to database
when i check space
I have 32 GB Drive and free space is 288M.
Can anyone tell me is this the space issue or any other issue.
I logged in with Oracle UserVikas Kohli wrote:
Hi All,
OS : Solaris
Oracle Version : 10.1.0.2.0
When i am trying to connect to database by typing sqlplus
i am getting error
-bash: sqlplus: command not found
previously when i connect like that i am able to connect to database
when i check space
I have 32 GB Drive and free space is 288M.
Can anyone tell me is this the space issue or any other issue.
I logged in with Oracle UserSet the environment variable PATH correclty and make sure you've added $ORACLE_HOME/bin folder to it
export PATH=$ORACLE_HOME/bin:$PATH
sqlplus / as sysdbaKamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/ -
-bash: then : command not found
Hi
Sorry i have post the same problem in Infrastruture but i am not getting a quick reply.Thats why i am posting this in the database thread.
I have installed OEL 5.I am going to install Oracle 11g.I have configured Kernel for oracle.But now when give the command su - oracle there is an
-bash: then : command not found
-bash: : command not found
When i give su - then also same these lines appear.Please send me a solution.
Will this give nay problem in database installation
Regards
Bobbyuser12119634(bobs) wrote:
Hi
Sorry i have post the same problem in Infrastruture but i am not getting a quick reply.Thats why i am posting this in the database thread.
I have installed OEL 5.I am going to install Oracle 11g.I have configured Kernel for oracle.But now when give the command su - oracle there is an
-bash: then : command not found
-bash: : command not found
When i give su - then also same these lines appear.Please send me a solution.
Will this give nay problem in database installation
Regards
BobbyTry
export PATH=/bin:$PATHthen do again -
Bash: chkconfig: command not found
Hi,
I have made a a file dbora and made an entry in the /etc/init.d
(The file basically does the Automatic Oracle Startup)
I have created a dbora file
I have then made the :$chmod 750 /etc/init.d/dbora
Then $chconfig -level 345 dbora on
Then its throwing error :bash:chkconfig: command not found
I have logged in as root:
$whereis chkconfig
its shwoing :chkconfig: /sbin/chkconfig
I tried also the same but not working
Kindly can anyone help me on thisuuh...ohhh...the answer to this question can be found at any fuckin bullshit linux documentation?!? so why don't you flame this guy for rtfm questions like the others for asking questions which can be googled for? Well Mr ASCORBINE why doesn't your post contain a link like http://lmgtfy/?q=command+not+found ?!? Actually the FIRST hit to this query got me to the solution, so if you are that wizard you pretend to be why didn't you rtmf him?!? Nah you seem to be another forum troll like others who is upset by himself for being a smartass....
-
Java -version bash: java: command not found
Hi all.
I wanna install java on linux (OpenSUSE). When I checked java -version, it shown that :
java -version
bash: java: command not found
Can any solution about it, please!Sukirmanster wrote:
I wanna install java on linux (OpenSUSE). When I checked java -version, it shown that :
java -version
bash: java: command not foundNot surprising if you have not installed java yet.
Can any solution about it, please!If you have installed java, read a unix/linux manual,
pay particular attention to bash (or any shell) and the role of $PATH. -
I have 10.6.8. When I type "purge" in Terminal I get: -bash: purge: command not found Is there another built-in command to clear memory leaks? I have FreeMemory (works well) and considering FreeMemory Pro, to clear memory periodically, say every 20 minutes, or preferably when a threshold is reached, say when only 100MB is available.
To get purge to work you need to install Xcode from Optional Installs on the 10.6 install DVD. Also be sure you install CHUD Tools with it.
But running purge or anything like it is pointless if within a short period of time the VM just grows back again. Sounds like you need more RAM.
Where are the memory leaks? Just because the VM reaches a certain size doesn't necessarily mean it's from a memory leak. -
-bash: gcc_select: command not found
HI
I am try to compile the Darwin kernel 9.8 on my system according this page https://developer.apple.com/library/mac/#documentation/Darwin/Conceptual/KernelP rogramming/build/build.html
but unfortunaly I get the error message
-bash: gcc_select: command not found
According to the manpage http://developer.apple.com/library/mac/#documentation/Darwin/Reference/Manpages/ 10.5/man1/powerpc-apple-darwin9-gcc-4.0.1.1.html
In Apple's version of GCC, both cc and gcc are actually symbolic links to a compiler named like gcc-version; which compiler is linked to may be changed using the command gcc_select. Similarly, c++ and g++ are links to a compiler named like g++-version.
but unfortunaly I didn´t got the command on my system
can anybody help (sry for the bad english) if the is not enough information pls tell me
System
Macbook5.1
Mac OS X 10.5.8
Xcode 3.1.2
Thank in advanceThank for the answer
but unfurtunaly I can´t sign in to the developer Forum don´t know why
I suggest that I have to pay $99/year to get access to Forum
Developer Technical Support Incidents are only available to members of the iOS, Mac, and Safari Developer Programs.
for a simple answer I am not ready to pay 99$ that is rip off fraud
Welcome to Apple
NO MONEY get out of here
realy sad
Hope that someone can help me with my issue how to get the gcc_select or how to change the gcc
cheers -
-bash: make: command not found
Help me please. I downloaded cdrecord because I need a tool called makeisofs but I am told that I need to compile it first before I can use it. The directions say to type "make" to compile it but when I type make in the terminal window, I get the following message:
-bash: make: command not found
I've spent hours looking all over the web for an explanation but I just can not find anything to help me. I even joined some IRC channels but no one types anything in those rooms. It is the weirdest thing.
Can anyone tell me why I can't compile? The directions I got with the download don't explain a thing.I found something that might help. On the second Leopard DVD, there is something called Xcode Tools which I am told has what I need. I'll respond if I have any other questions. Thanks for reading.
-
Opmnctl status: "bash: opmnctl: command not found"
Hi All,
I am working to setup an OBI 11g VM image to my local system. The VM is a linux OS and my local m/c is Windows7. I am able to login to the VM using oracle/oracle. But the thing is, I am not able to start up my BI server over the VM.
I checked the status of opmnctl file present at: /home/oracle/obiee/instances/instance1/bin. But getting the message as "bash: opmnctl: command not found".
I did reboot the VM a few times as well. But, i am not sure can this be a problem? Please suggest what I did wrong and how can I resolve it.
Thanks.Is opmn running?
try using a different shell e.g ksh.
l -
I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.
It appears that you may not have a properly installed OS X system.
You must be connected to the Internet to reinstall OS X.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Disk Utility,” and then click Continue.
Select your startup disk from the list on the left, and then Repair Disk.
After disk is repaired, select Reinstall OS X, then click Continue.
Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk -
[Netconsole] bash: nc: command not found ?
I configured and loaded as root Netconsole module (its running) to watch a Plug computer boot on a PC with ArchLinux 3.5.4-1 installed, but when running nc command on the PC, bash gives error:
nc -u -l -p 6666
bash: nc: command not found
Any ideas? There is no nc file in /sbin dir or anywhere in FS.
Last edited by sambul13 (2012-10-02 23:01:16)Judging from http://lxr.linux.no/#linux+v2.6.32/Docu … onsole.txt 'nc' means 'netcat', not 'netconsole'.
Install gnu-netcat and try again.
Maybe you are looking for
-
Udf in Banks - validate accountnumber
Hello, In the Netherlands almost every accountnumber can be validate with a check digit formula. Some banks use this check digit formula and some banks don't. I would like add an udf in banks with a checkbox. When someone add a new accountnumber on t
-
How to delete or rename an object that has been created in IR.
Dear friends I have transfered a software component from SLD. But if I want to rename this so that I can re-import it from SLD or delet this transfered SWC object, how can i do it. I see a 'delete' option under the menu item Object, but it is grayed
-
Faulting application name: AcroRd32.exe, version: 11.0.0.379, time stamp: 0x505fd19e Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x5d69273f Faulting process id: 0xd64 Faulting app
-
hey guys i want the code for user-exits for inclusion of Excise Chapter ID mandatory in PO ..... regards, Naveen
-
Dreamweaver and Javascript error only on one site
I receive the following error when trying to select recently modified files from the files panel. While executing onClick in SelectRecentlyModified.html, the following JavaScript error(s) occurred: At line 370 of file "C:\Program Files (x86)\Adobe\Ad