Off-Hours Alerting on WLC/ISE

Dear Community,
On a corporate enviroment, we are using a WLC Model 5508 along with a Standalone ISE for Wirelless authentication.
I was wondering if it is possible to set time-based alerting (via the WLC ??), in order to receive e-mail notification from ISE (or WLC) when there is a mobile device connected on AP off-hours (for example after 7pm).
Any comment is more than welcome.
Thanks

Hello Rasika,
Thanks for your prompt response.
Yes we have Prime Infrastructure 2. Actually my point is not to monitor a specific client, rather than activate an alert when the WLC has connections on "off-hours"
Do you have any suggestion on this?
Thanks

Similar Messages

  • How do you turn off all alerts except the ringer? For sleeping

    I just got my iphone4 today.  I need to know how to turn off all alerts and tones at night for sleeping, but I need the ringer to stay on.  Please help
    Much Thanks

    Thanks, will try that tonight, hope it works.   You solved that issue in 2 minutes, lol.  I've been calling friends and looking online for a few hours!! Thanks again!!

  • On iOS 7, my wife receives alerts from my calendar even though she chose not to see my calendars on her iPhone (We have the same iCloud account). How can I turn off my alerts on her iPhone 5 but nor her alerts ?

    My wife decided to use her calendar on her iPhone 5 via our iCloud account so that it will be synchronized with her iPad 3.
    I have been using it for many years for leisure activities and for my work.
    Althought she chose, in her calendar settings, to only see her calendar and not my calendars (I have many for leisure activities, for one of my job, for my other job etc...), she still gets alerts from my calendar events even thought she do not see the events on her iPhone nor on her iPad.
    Has anyone a solution for this ?
    I read many things on internet about this but found no solutions yet.

    Well, let take the personal service point of view : let say, I had two calendars on my iCloud account : one for work, one for my leisure activities.
    On my MacBook Pro that I use at home as well as at my office, I would want the two calendars to show and since I am alone in my office, I would want the alerts for both my work and my leisure activities to show (and make a sound at the same time).
    But on my iPad that I only use at home, I would only want my leisure activities alerts to show (and make a sound) and on my iPhone that I only use for work, I would only want my work alerts to show (and make a sound).
    That is a personal service that simply does not work.
    Why would Apple give us the opportunity to hide some calendars on certain devices but not allow us, on these same devices, to switch off the alerts linked to these calendars that we have chosen to hide ? Why having alerts of calendars that do not even show on these devices ?
    And I am an Apple fan since 1984, since the very first Mac. I still do believe Macs and Apple devices and/or software (iOS, OS X and others...) are much better and much more efficient than " Microsoft, Windows, Google and other Android devices and software.
    But that does not mean everything's perfect (and I find that quite normal).
    Nevertheless, in this case, letting alerts make a sound on a device where a specific calendar is not shown, that does not make any sense : when uncheking those calendars, the alerts linked to those calendars should be automatically switch off (but alerts should be able to work on the calendars that are shown.)

  • How do I turn off email alerts in iOS 7?

    How do I turn off email alerts in iOS 7? I've been to Notifications, Mail/Contacts/Calendars & Sounds. Turned everything off but the kitchen sink...powered down and back up...persistent email sound goes off everytime mail arrives (junk or good). Thanks. Started happening after upgrading my wife's iPhone 5.  I had no problems with upgrade on my own iPhone 5 (imagine that LOL).

    further clarified, yes I move Mail App to DO NOT INCLUDE and the mail icon now appears in that list. Mail is set to Vibrate Only...thanks for trying

  • How to turn off charge alert?

    Since I have loaded GDR2 & 3 the charging alert sounds in the middle of the night waking my wife and me. When I place the phone on the wireless charger the charging alert sounds as it always has but what is new is that the alert will sound again sometime
    later. It seams that the phone charges then when the phones battery runs down to a certain level the charger kicks in again and the alert goes off again. How can I turn off that alert? I use my phone as my morning alarm so I want to keep the volume up and
    if I put it on vibrate the noise of the vibration wakes me up. As you can imagine I am beginning to hate my phone for waking me up in the middle of the night.

    Thanks for the reply, I have found other posts on other forums that explain this issue similarly to the way you did. The phone charges then looses some of the charge over night then starts to charge again and when it stars to charge it sounds that alert.
    I don't think it is unreasonable for the battery to run down a little overnight. My battery life is really good especially since gdr2 and gdr3. But I think it is important to point out that this alert issue began with gdr2 or gdr3 or the Nokia firmware, it
    is hard to say which since they were all loaded just a few days apart. For what it is worth another issue I noticed following the upgrade is that the phone is much more sensitive to the placement of the phone on the wireless charger. If you don't get it on
    there just right it repeatedly sounds the charging alert. Again this is new behavior following the updates. I am hoping that the black update will correct the issue. BTW. My wife has a newer 920 and hers does the same thing following the updates, which leads
    me to believe that it was the updates that started the problem. Thanks for your help.

  • How to Sync clock on WLC ISE and AD

    Hi there,
    I am stuck in NTP, deployed WLC CWA using ISE that is integrated with AD. I tried using AD as NTP source but no luck(universal fact that Cisco uses NTP where as Microsoft uses SNTP).
    The issue is, if time is not synced between WLC, ISE and AD; web redirection stopped working and no authentication takes place.
    I tried installting Meinbergglobal NTP software to distribute time to my Cisco devices. It does work with Cisco devices but it acts as master and do not sync its own time with AD.
    I am trying to figure out a way to sync Cisco with Microsoft, is there any way in this world to do so???
    Please help..
    Thanks in advance           

    You mean I should sync AD and all my cisco devices with global NTP server?
    Yes and no.  If you know your network well, doing this is a pain in the proverbial backside because you have to open firewall rules to everyone going out to the global NTP server.
    The smart thing to do is what George has described.  You select a few (between two to four) to go out to the internet to synchronize.  Normally I would nominate our core routers do this.  Next, all our distribution switches and core switches synchronize to our core routers.  All our servers, PCs, printers, WLC, switches  sychronize to our distro switches. 

  • Messages to SAP During Off hours

    hi ,
    I long into work center via weblink as a key user during off hours and create an Ossmessage.
    I then login as message processor in SOLMAN and I can see the issue in SOLMAN ? does that mean that the message did not go to SAP?
    what configeration is needed to Solve this one ?
    please assist
    thanks
    smitha

    the priority was 1 but I dont understand what apporpiate section in Sold-To Party's business partner  needs to be updated .can you be more specifi please .
    I understand the login of OSS Message showing in the SOLMAN but how can I validate that it really went to SAP ?
    can you assist?
    thanks
    smitha

  • How to turn off Emergency Alerts on a GalaxyS4 (running 4.4.2 Kit Kat)

    If you are like me, you hate those annoying Emergency Alerts that fire off when  you are in a meeting or trying to sleep, etc. Previously, you could could go to Messaging > Settings > Emergency Alerts and turn off Amber Alerts and Weather Alerts. However, in a recent update for Galaxy S4, it appears some jackwagon removed the ability to disable this "feature" from Messaging Settings.now
    This approach will work with version 4.4.2 (at least). It may work with earlier versions.... Im not sure when the change was made.
    If you want to turn this "feature" off, here is how you do it:
    1. Click Menu
    2. Go to Apps.
    3. Find the Emergency Alert app. Open it.
    4. Click the menu button at lower left of your phone.
    5. Click Settings. A new menu will appear.
    6. Click Alert Types.
    7. Remove the check boxes next to Extreme Alerts, Severe Alerts, and AMBER alerts (as you so choose)
    8. That's it, you're done. Click the Home button and move on with your life.
    Brought to you by Texas   :-)

    If I understand your description correctly,
    it's the frame manager that has the fault light.
    That's an old quirk that is specific to that rack component.
    It has (essentially) no impact on whatever systems are installed to the rack.
    It is usually just a visual annoyance.
    Use your service contract and open a support case with Sun.
    That will give them a chance to help you check on everything.
    They'll walk you through the correct steps of power-cycling the frame manager.
    That can be done while the servers are happily serving.

  • How do I turn off email alerts on my Imac

    How do I turn off email alerts on my Imac without turning off the sound on the computer?

    On the menubar,  Mail > Preferences > General tab > New message sound: > set to none.

  • Can i turn off email alerts for find my iphone

    How do you turn off email alerts for find my iphone?

    There is no way to turn it off, just reduce it. It is a new security feature. It depends on where you are logging in that is generating the email. If you are logging in from a computer browser, if you have cookies on, it should not generate the email except for the first time that you use that device. If it is from logging in to the Find My iPhone app on the iPhone or iPad, if you have a passcode lock set on the device, it will not generate the email, as you will not be logged out of the app on the phone. You just use the home button to get past the app and it stays logged in by not tracking. You open the app again and it will just take you right in without having the log in and will refresh itself.

  • Anyway to turn off Email Alerts at night?

    I am looking for a way to turn off email alerts at night.  I just don't want the sound to wake me up.  I know I can manually change my volume each night to phone calls only, but I was wondering if there was an automatic way of doing this?
    I don't want to auto on/off my phone either because it's is the only phone I use in my house.  Never know if there will be an emergency at 2 AM and someone needs to call you.
    Thanks for any suggestions!
    Solved!
    Go to Solution.

    or go into the clock mode and in options select "enter bedside mode".
    I use this and no email or notifications ring until I "exit bedsidemode:.
    Hope this helps

  • Turn off sync alerts for dock changes?

    I just upgraded to Lion from Snow Leopard. This mostly went well, however, when I make any changes to my dock, I get a "Sync Alert" saying that syncing with the dock with change it by more than 25%. How do I turn this off?
    Couple of notes:
    - I've never had a Mobile Me account.
    - I've never tried to sync the Dock with anything.
    - I have more than 20 items in the dock, so changing a single item shouldn't constitute a 25% change anyway.
    What process is producing these alerts and how do I make it stop?
    On a similar note, when I sync my iPad to iCal using iTunes, I get a similar complaint about 25% change. This is again nuts, since I have appointments dating back to 1999 and the last sync with iCal only added 2 new events.
    I tried fishing iSync from Snow Leopard out of a back up and unchecking the alert box for 25% change. But that didn't help.
    Any ideas???

    I have iPhone 6 with iOS 8.1.3, and this is the solution that's working for me so far. However, I had to use the Calendar app on my Mac OS X (Yosemite) - not sure if there is another option for PC. Basically, I added the shared Google calendar to iCloud and told Google not to sync the shared calendar to my iPhone, so the shared calendar now shows up under the iCloud list of calendars and not the Google list (and thus the option to turn off alerts). Note: the shared calendars I'm using are read-only, so I don't know how well this would work if you need to edit events from iPhone. I hope this helps, and if anyone has a better solution, please share!
    1. Turn on iCloud calendars on iPhone and Mac.
    2. In browser, open the shared Google calendar settings and copy the iCal calendar address URL.
    3. In Mac OS X Calendar app, subscribe to the shared Google calendar. File > New Calendar Subscription > paste shared Google calendar URL > click Subscribe
    4. Set Location to iCloud. I checked Ignore Alerts because I also didn't want them on my Mac.
    5. The shared calendar should now be listed on your iPhone calendars in the iCloud section with the red i.
    6. Press the red i and scroll to the bottom and switch off Event Alerts.
    7. Remove the shared calendar from the Google list by going to https://www.google.com/calendar/syncselect and unchecking the shared calendars.

  • Turning off sound alerts altogether

    I've plugged in headphones to my iBook, but get annoying sound effects as I work in Microsoft Word, with sounds everytime I cut/paste, drag a word, etc. and at the same volumn as the music I'm listening to on the headphones. I work a lot on Word and want to turn off sound alerts altogether but don't see that option.

    Did you look in your Word Preferences?
    In my version (Word 2004) in Prefences:General is a checkbox
    "Provide feedback with sound"
    Jeff

  • Turning off email alerts

    Is there a way to turn off email alerts?
    Solved!
    Go to Solution.

    Yes, check your profile. If you don't have a Phone Only profile, edit your Ring tones and Alerts to set the volume on email messages to MUTE.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do we turn off the alert emails when we do a search with find my iphone?

    How do we turn off the alert emails when we do a search with find my iphone?

    You are not talking to Apple on here, we are all fellow users and not Apple employees.  You can comment to Apple by giving feedback at http://www.apple.com/feedback
    What we have heard is this 'feature' was added as a result of the high-profile downloads of celebrity photos from iCloud accounts.

Maybe you are looking for

  • [Solved] Accents on US keyboards

    Hello everyone, I have already solved this for my laptop, so I post the solution to help someone else. My laptop is a Dell Inspiron E1505, with English-us keyboard. And my main language is Spanish, so I normally use accents like áéíóú, and ñ. The sol

  • Clearfloat problem-extra space remains in IE

    Hi, I've worked on this problem, did the Google thing, but I just can't resolve it. There is extra space remaining under the image even after using clearfloat. I want the bottom border to snug up to the bottom of the image, but somehow in IE I keep g

  • Roles doesn't work

    when I connect as SYS ,I find the following error:user SYS lack create SESSION privilege.logon denied. I am sure the SYS has been given the connect role and the connect role has been give the create session privilege,so it seems the role doesn't work

  • Letting drill-down on a column depending on permissions

    Hi friends, I have a question about drilling-down on a column. I've designed a hierarchial level security on my application, so, some users can't access to certain information, therefore the query will get back it no results. But i need dissable dril

  • Exception -- with CustomSecurityRealm on WL6.0

    I started the weblogic server with my caching realm which incorporates the clone of RDBMSRealm. everything ran fine and i checked the security node on the console and the users node on the same. Shutdown the server from the monitoring tag on the Serv