Office 2013 over Windows Server 2012 RDP World Add-On Macro/Template Error

I have a new Windows Server 2012 Remote Desktop environment for about ten users (not R2) with the latest Office 2013 Pro installed.
The users all have an add-on word template in Word for Office 2013.  That add-on was installed as administrator and ONLY works as administrator.
When any other user (even if they are local administrators, domain admins, etc.) opens Word, they are immediately prompted with the following message:
"Could not load some objects because they are not available on this machine."
If a user "runs as administrator" it runs fine.  Obviously, I don't want that.  I have been searching and searching and thought maybe there was a group policy or Office setting someone may know that I just can't find.
Any help would be awesome!  Thank you.

Hi,
Once you login with the user account which is not getting access, try the below steps and check if it helps fix the issue: 
Click on start->control panel->programs and features->right click on the Office 2013 program->click on change->add or remove features-> click on the drop down arrow which is before the Microsoft Office->click on Run all from my computer->Continue.
Once completed restart the computer and then open to check if the issue occurs.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

    Hi all,
    I installed SharePoint server 2013 on Windows  server 2012 R2 using VirtualBox.  I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
    the DC server.  Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
    admin page, it gives error info:
    System status:  The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
    a good state and try again.
    Search Application Topology:  Unable to retrieve topology component health states. This may be because the admin component is not up and running.
    From event viewer, I see following errors:
    (1) Error From source: SharePoint Server
    Application Server Administration job failed for service instance  Microsoft.Office.Server.Search.Administration.SearchServiceInstance
    (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The object you are trying to create already exists. Try again using a different name.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.  
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
    isAdministrationServiceJob)
    (2) Error From source: SharePoint Server Search
    Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
    Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
    (3) Warning from source: SharePoint Server Search
    A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description:  Error ordinal: 1 Message:
    Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
    System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
    (4) Error From source: SharePoint Server
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
    (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
    been upgraded.  
    Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
    Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
    Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
    Thanks a lot.

    Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
    Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
    Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
    $IndexLocation = "C:\Search"  #Location must be empty, will be deleted during the process!
    $SearchAppPoolName = "SSAPool"
    $SearchAppPoolAccountName = "mydomain\admin"
    $SearchServiceName = "SSA"
    $SearchServiceProxyName = "SSA Proxy"
    $DatabaseServer = "W12R2DC1"
    $DatabaseName = "SSA"
    $spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
    if (!$spAppPool)
     $spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
    $ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
    if (!$ServiceApplication)
    # process stays at the following step forever, already one hour now.  
    $ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer  $DatabaseServer -DatabaseName $DatabaseName
    Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
    (1) Crawler:Content Plugin under source Crawler:Content Plugin 
    Content Plugin can not be initialized - list of CSS addresses is not set.
    (2) Warning for SharePoint Server Search
    A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description:  Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2   
    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
    (3) Error for SharePoint Server Search
    Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
    Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
    (4) Error for SharePoint Server
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded. 
    (5) Error Shared Services for SharePoint Server Search 
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The object you are trying to create already exists. Try again using a different name. 
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name. 
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
    Above errors keep being generated. Last step for SSA creation stay there forever.  Any clue what is really going on?  Thanks.

  • Project Server 2013 on Windows Server 2012 R2

    Can we install Project Server 2013 on Windows Server 2012 R2? Is it supported? I searched a bit but couldn't find any concrete information if it is supported or not.

    From the article:
    http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
    Today, aligned with the SharePoint Conference, we’re announcing availability
    of a slipstreamed SharePoint Server 2013 with SP1. SharePoint administrators
    will be able to use this updated installer to deploy on Windows Server 2012 R2.
    which I got linked from the following
    http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx

  • Install sharepoint 2013 on Windows server 2012, Microsoft Identity Extensions issue !!!!!!!!!

    Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
    I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
    The 2012 R2 server has been updated with all latest files by executing Windows update.
    In case of the Server 2012 R2,  MIE is already installed , but somehow the Sharepoint installation is missing something.
    I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
    When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
    I've tried several Sharepoint server installation files, including the 180 days free version.
    Screenshots will be uploaded after my account has been checked......

    Hi Jay,
    Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
    SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
    Refer to:
    SharePoint 2013 Support for Windows Server 2012 R2
    In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Not able to inistall Sharepoint 2013 on windows server 2012 r2

    Hi ,
    I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer. 
    As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite 
    http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
    SQL Server 2008 R2 SP1 Native
    Client 
    Microsoft
    WCF Data Services 5.0 
    Microsoft Information Protection
    and Control Client (MSIPC)
    Microsoft Sync Framework Runtime
    v1.0 SP1 (x64) 
    Windows
    Identity Extensions 
    Windows
    Identity Foundation (KB974405) 
    Windows
    Server AppFabric
    CU
    1 for AppFabric 1.1 (KB2671763)
    All got installed correctly on server validated from control panel then i restarted the server and Ran  SharePoint Set up
    But still facing issue attached in form of image
    Please help me on this.
    kirtesh

    Hi kirtesh,
    According to your description, my understanding is that you got an error when you ran prerequisite installer.
    Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
    Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
    i. Application Server
    ii. File Services
    iii. Web Server (IIS)
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Installing Exchange 2013 on Windows Server 2012 R2

    Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
    But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
    - Install Exchange 2013 (without SP1) on Windows Server 2012 R2
    - Install SP1 on top of Exchange 2013
    If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?

    yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
    Arnaud Buonaccorsi - GSX Groupware Solutions
    http://www.buenoflex.com
    http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

  • How to install SharePoint server 2013 in windows server 2012 R2

    Hi,
    I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
    Can you guide me on how to install it?,
    or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
    thanks in advance.

    Hi,
    Now I could install SP 2013 following this article
    http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
    I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
    Thanks everyone.

  • Is it ok to install Exchange 2013 on Windows Server 2012 Standard?

    Hello everyone,
    I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
    As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
    On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
    I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
    Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
    Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
    Thanks in advance.

    Few things to note.
    There is
    NO SBS in 2012
    All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
    For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
    Rajith Enchiparambil |
    http://www.howexchangeworks.com |

  • Not able to install Exchange Server 2013 on Windows Server 2012

    I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
    thanks :

    Hello,
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Cara Chen
    TechNet Community Support

  • Exchange Server 2013 In Windows Server 2012 - unable to logon EXchange Administrator Center (EAC)

    Hi All,
    I Just installed Exchange Server 2013 in Windows Server 2012 and trying to connect Dynamics CRM 2013 (DNS).
    The Installations Success full but unable to load the EAC page by using the following URL
    https://servername:port/owa/auth/logon.aspx
    I have cross checked in Exchange/owa/auth folder don't have the "logon.aspx" file 
    But the auth folder have the "logoff.aspx" 
    I installed many time freshly in separate WS-2012 but it not contains that logon.aspx 
    I want access the Exchange Administrator Center 
    Please Help me to solve it 
    IIS Exchange (Missing of logon.aspx)
    SRKD0808

    Hi All,
    I sorted out this problem 
    Actually we have to run these 2 commands in Domain Control, But what i did  I just run this
    1) setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
    Command in Domain Control we don't need to run the 2nd command, Because I already try to installed exchange 2013 very first time it success and after some modifications
    it gone.
    That time it will ask you to provide Organization name, Once you give that it will create the Organization name in Domain control and it will save the settings when
    you install first time 
    Because of this reason It is failing to run these 2 command
    Finally what i did I just revert back my Domain control snapshot & Exchange server as well 
    Then i started freshly Installation in DC and Exchange server 2013 successfully installed 
    URL http://servername/ecp/default.aspx
    Whole Process will be here 
     Exchange Server 2013 Step by Step Installation In Windows Server 2012
    SRKD0808

  • Office Professional 2013 on Windows Server 2012 R2 Essentials

    I installed Office Professional 2013 using emailed key - AAA-02768  * KEY ONLY EMAIL * Any attempt to run the installed software reports "
    Must have Volume Licence edition of Office"  I downloaded volume licence pack and get told my OS is not a VL edition.  What do I need to get Office 2013 running on this server?  One person will remote desktop into it, I purchased 5 RD licence
    as I was told this was essential.  I tried one solution downloading a trial, install from Install Application on Remote Desktop but that reported invalid key.  Can it run?  I know it is mainly a server, not a workstation, but surely Office can
    run on it.

    Hi Michelle,
    Where did you download the volume license edition of Office 2013? At what exactly point did you get the "OS is not a VL edition" message?
    Generally, to install Office 2013 on a server with RDS, you must have a volume license and you must use Office Professional Plus 2013 from the
    Volume Licensing Service Center (VLSC).
    For more information about the volume licensing for your situation, you should contact your local reseller or Microsoft partner.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Error while installing Microsoft Identity Extensions Setup during installation of SharePoint Foundation 2013 on Windows Server 2012

    Hi All,
     When i try to manually (no internet connection on the server) install SharePoint 2013 Prerequisites on Windows Server 2012 I get the below error
    I have installed .Net Framework 3.5, 4.0 and Windows Identity Foundation using Add server roles or features from the server manager.
    From Software & Hardware requirements for SharePoint 2013 give
    Prerequisites for SharePoint 2013 I can see that the identity extensions are available only of Windows Server 2008 R2 and not for windows server 2012. Can you please provide the link for windows server 2012? 
    I have installed all the prerequisites required except Microsoft Identity Extensions.
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    I fixed it by installing Microsoft Identity extensions from command line, please find command line below.
    C:\Windows\System32>msiexec.exe /i "C:\SharePoint2013ServerFiles\prerequisiteinstallerfiles\MicrosoftIdentityExtensions-64.msi" /quiet /norestart
    Note: In the above command C:\SharePoint2013ServerFiles\prerequisiteinsTallerfiles is the path where I had downloaded all the prerequisites for SP2013
    This will install Microsoft Identity Extensions and creates registry entries, which will help the SharePoint 2013 Prerequisite installer to complete the setup
    For more details check out
    here
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

  • Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

    I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
    Been reading this thread 32&64 bit Oracle Client but not much help there.
    Here are the  details
    System
    Windows Server 2012
    Crystal Server 2013 SP5
    Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
    We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
    I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
    The tns entries are also located in both installs of oracle client...
    What might be the issue?

    Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
    Installation Type: Custom
    COMPONENTS INSTALLED:
    SQLPLUS
    ORACLE NET
    We are currently not using an ODBC connection.
    We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

  • Install Prerequisite sharepoint 2013 on windows server 2012 r2, take forever

    today i try to install prerequisite, for the first time, it take like 2 hour and still not finish.
    its normal??
    and then i cancel by using task manager..by end task..
    now i run again install prerequisite.
    did i make any mistake?
    currenly it still installing
    link image
    "http://i62.tinypic.com/apjlev.png"

    It  a issue with Windows server server 2012 r2.
    You need sharepoint 2013 sp1
    http://support.microsoft.com/kb/2891274
    http://blogs.technet.com/b/wbaer/archive/2013/09/22/sharepoint-2013-support-for-windows-server-2012-r2.aspx
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for

  • Corrupt Power Mac Firmware

    Is there anyway to install a fresh firmware (4.2.8) on a system that already has firmware 4.2.8 I ask this because my sonnet firmware modifier software has corrupted my firmware (the system still boots but I can no longer add/remove the firmware patc

  • Need help with Photoshop elements 11 download

    Just purchased a download card for Photoshop elements 11, created an account, registered the card, got a serial #. And now there is no download screen, or prompts to guide me to the next step of downloading the product. What is the issue and what sho

  • How to parse multiple xml documents from single buffer

    Hello, I am trying to use jaxb 2.0 to parse a buffer which contains multiple xml documents. However, it seems that it is meant to only parse a single document at a time and throws an exception when it gets to the 2nd document. Is there a way I can te

  • Can't attach files or photos after microsoft update to 8.1

    I have a HP Envy Desktop all in one computer which I purchased in April 2013 with Windows 8.  Recently my Microsoft automatic update added Windows 8.1.   When that occured it knocked my printer off and I reinstalled.  I use Outlook 2013  for email. 

  • Why do I need brarchive ?

    Hi, Few questions about db2 log archiving. We have TSM server in our enterprise and use it to store db2 backups and db2 logs. We have "TSM for Enterprise Resource Planning" software installed. As I understand this is like TSM client and we use it for