Office Web Apps Error after SP 2013 September 2014 CU
Hello Everyone,
I have a single front end and single SQL server for my SharePoint 2013 deployment. I also have Office Web Apps setup and running. However after installing SP 1 and the latest September 2014 CU it appears our users are seeing the below prompt
when open a Word doc in Office Web Apps.
However I am finding that if they use IE 9 or 10 and even Firefox everything works normal. This appears to be affecting just Word.
As for my Office Web Apps server it is still at Version 15.0.4420.1017 (RTM)
If I need to update my Office Web Apps server what order should i do. SP1, July, then Sept?
Thanks,
Ian...
You need to apply office web app update.
It should be in below order.
Office web app Sp1
September 2014 update
If this helped you resolve your issue, please mark it Answered
Similar Messages
-
Office Web Apps server / Lync server 2013
Hi I have installed a Lync 2013 Server and Office Web Apps Server. Configured Lync topology, Office Web Apps farm and certificates.
However when i start the services i get this error message in the log saying Office Web Apps discovery failed.
Event ID: 41033
Description:
Office Web Apps Server (WAC) discovery failed, PowerPoint content is disabled.
Attempted Office Web Apps Server discovery Url:
Received error message: Invalid Uri syntax for WAC configuration
The number of retries: 1,
Cause: Office Web Apps Server may be unavailable or network connectivity may have been compromised.
Resolution:
Check HTTPS connectivity from this box to the Office Web Apps Server deployment using the discovery Url.
I can access the OWAS server Url from Lync Server
Connecting to the HTTPS discovery URL is working fine, and brings up the XML-page (after i click "show all content").
The two servers are located on the same internal network, DNS resolves fine both ways, and no firewall rules blocks any connections between the two. Can anyone please help me figure this out?
Only identical problem found online is here (Invalid Uri syntax for WAC configuration):
http://blogs.technet.com/b/dodeitte/archive/2012/09/10/office-web-apps-server-amp-lync-server-2013.aspx
He resolved the problem by assigning a new OAuthTokenIssuer certificate. This however did not fix the problem in my case.
Regards
Sverre A. VeelHi,
In addition, please make sure you have restarted front end and office web apps server after reissuing the certificate.
Kent Huang
TechNet Community Support -
Office web apps Server for Sharepoint 2013
Hello,
I used the following article to install office web apps server and hook it up to a test sharepoint server:
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx. The OWAS service was verified as working by loading:
https://owas.companyname.com/hosting/discovery
For the sharepoint configuration phase, the following commands were run on the sharepoint machine:
1) New-SPWOPIBinding -ServerName "owas.companyname.com" -- (owas.companyname.com) is the host name of the owas server)
2) Get-SPWOPIZone
3) Set-SPWOPIZone -zone "external-https"
However, office documents are still launching in the desktop office applications, not in the browser. Any ideas of what else I may need to do?
thanks,
SherazadHi ,
According to your description, my understanding is that you fail to configure Office Web Apps for your SharePoint 2013.
How about run Get-SPWOPIZone? If you can get a result, it says that your SharePoint have connected with Office Web Apps.
Then you can run below command to change the zone to internal-https.
Set-SPWOPIZone -zone "internal-https"
Reference:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
SharePoint 2013 and MS Office Web Apps - error in sharepoint's url calls OWAps
I have new SharePoint 2013 Server farm and one dedicated Office Web Apps (OWAps) server.
This farm is placed in one domain (Acompany.local). There is other domain BCompany.local whitch has both trusted to first domain (two diffirent forests, two company's branches).
Users from second domain BCompany.local well see intranet portal, build in sharepoint in the first domain (url like http://intranet.Acompany.local).
But, when they try to use OWAps, f.e. whatching preview or try to open docs for edit in browser - they see error in frame.
I'm looked it in google chrome's developer tools and find' that sharepoint use wrong url to call OWAps - like http://owaps/... instead of http://owaps.Acompany.local/...
When I created new office web app farm by:
New-OfficeWebAppsFarm -InternalURL "http://owaps.Acompany.local" - ExternalURL "http://owaps.Acompany.local" -AllowHttp -EditingEnabled
And in sharepoint farm new SWOPI binding by:
New-SPWOPIBinding -ServerName "http://owaps.Acompany.local" -AllowHTTP
Get-SPWOPIBinding tell that all SWOPI bindings are http://owaps.Acompany.local, but in devtools I continue to see wrong http://owaps/... url
Any idea to fix this behavior?The reason WAC is recommended to be installed on a dedicated server is that it recreates the IIS sites/settings. This is why you're seeing the setting reset itself after restart.
What I'd probably recommend is creating a script that queries the WAC URL on a regular basis.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Office Web App error - unable to open PDF after multiple trials
Hi, we are using Office Web App server 2013 on win server 2012 (NO Sharepoint installed) to preview files (doc, docx, pdf, xls, xlsx, ppt, pptx), OWA is set as http, wopihost
is http as well under different from HTTP80, HTTP809 application pool
File conversion if fine for small files and large files to some point - we can process same large pdf (100MB) 30-50 times, but after that there is a message
"Sorry, Word Web App ran into
a problem opening this document. To view this document please open it in Microsoft Word."
Server has plenty of free space, PerfMon
does not show spikes, no memory spikes in Process Manager. ULS logs do not provide any good info either...
No errors in event log under Applications,
System, or Microsoft Office Web Apps sections.
That error will be shown if we process
the same file. if try to process different file it works fine (again - few dozen times), but if after that I try to process first file - it shows error again.
Documents
are located on the same server as OWA installed, same machine has wopi site in non owa application pool (from Microsoft demo
- C#)
The only resolution i found is to reset
WAC server from PowerShell or restart IIS - after that it starts to process original file...
If I just recycle OWA application pools
- HTTP80, HTTP809 it does not help. (tried to change Recycling condition in IIS for those pools - it slightly improves situation but does not resolve).
I can reproduce such pattern with different file types, it just matter of number of hits.
Same error present if we use OWA and wopi on machine as https with certificate.
We use VerboseEx option for logging - no errors in ULS log files, but multiple Sync exiting
early records similar to
Sync exiting early: LastSyncTime = 09/16/2014 14:52:07
at Microsoft.Office.Web.Apps.Environment.WacServer.ACacheableFarmStateObject.Sync(Boolean force)
at Microsoft.Office.Web.Apps.Environment.WacServer.AFarmSettings.TryGetSettingValue[T](String settingName,
T& value, Boolean shouldProcessValue)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSConfigAdapter.TryGetValue[T](String settingName,
T& value)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSServiceInstanceFinderAdapter.GetAgentUri(WebAgentProperties
agentProperties, String machineName, String fqdn)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSServiceInstanceFinderAdapter.UpdateServiceList()
at Microsoft.Office.Web.Apps.Environment.WacServer.WSServiceInstanceFinderAdapter.FindAllServiceInstances()
at Microsoft.Office.Web.Common.ServiceInstanceFinder.RefreshList(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback
callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
Object state, Boolean preserveSyncCtx)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.TimerQueue.FireNextTimers()
---------------------------------There are some paired records
Cached service list has 39 service instances before the update
Cached service lists has 39 service instances after the update
So it goes as follows: OWA processing all formats fine, after trying same 100mb pdf file 50 times (it is possible to get same error with docx, just bigger number of trials) it does not process that pdf file, but processes others.
After IIS reset it works as usual again. After trying another 100mb pdf file 50-60 times OWA stops to process that another file... We are expecting large number of hits and resetting IIS every 30min is not a good solution...
Any help will be appreciated.
Thank youHi ,
Thank you for your post.
Whether the issue occurs with different file types or only the PDF.
Based on your description, when you reset WAC server from PowerShell or restart IIS, the issue is solved temporarily.
I recommend that you check the application account, re-enter the account, then reset the IIS.
whether the issue occurs with different file types or only the PDF.
In addition, please check if the link is useful:
http://stevemannspath.blogspot.jp/2013/04/sharepoint-2013-pdf-support-and.html
Best Regards,
Lisa Chen -
hi -
I have Office Web Apps 2013 installed and configured on my dev server. It's set to allow HTTP.
When I try to preview a Word document, the frame displays the following message:
This content cannot be displayed in a frame.
To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame.
According to this
link, low memory conditions can cause this error in the preview. I have checked that and we are OK with memory.
For Excel documents, I get the following error in preview:
The website cannot display the page
Most likely causes:
•The website is under maintenance.
•The website has a programming error.HI,Seems to be issue with the connection between sharepoint and office webapp.Check the below URL to get the connection successed and work succesfully.
http://expertsharepoint.blogspot.de/2013/12/microsoft-office-web-apps-server-2013_19.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Office Web App error in extended web application
I have a web application that has been extended in intranet zone. While all feature works in the application in the default zone of office web app, creating new document from site it self does not work in intranet zone. Error I am getting is sorry, there
was a problem and we can't open this document. If this happens again, try opening document in microsoft word. I was not able to find anything regarding this.
My extended web application is using FBA and default zone uses windows.
Thanks,
Errors in ULS logs
WOPI ProcessRequest - Unhandled Exception in WOPI app layer [e: System.InvalidOperationException: Operation is not valid due to the current state of the object.
at Microsoft.SharePoint.SPUserToken.GetClaimsUserLoginName()
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUser user)
at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri endpointAddress, SPUser user, String applicationContext, DateTime& validTo)
at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPWeb web, Guid uniqueId, String proofKeyId, SPUrlZone zone, SPBasePermissions perms, Boolean hasEditLicense, Int64& ttl)
at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPFile file, WopiTokenContext tokenContext, Int64& ttl)
at Microsoft.SharePoint.SoapServer.Wopi.RunCobalt(HttpContext context, CommonRequestData requestData, CommonResponseData responseData)
at Microsoft.SharePoint.SoapServer.Wopi.ProcessRequestCore(HttpContext context, CommonRequestData requestData, CommonResponseData responseData)]
WOPI - CopyRequestBodyToStream throw exception [exception System.ObjectDisposedException: Cannot access a disposed object. Object name: 'Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedMemoryStream'.
at Microsoft.SharePoint.Utilities.SPChunkedStream.get_Length()
at Microsoft.SharePoint.SoapServer.Wopi.CopyRequestBodyToStream(HttpContext context)]
WOPI cobalt - Failed to read entire request body, url
sachinHi sachin,
According to your description, my understanding is that you got an error when you created a new document using OWA in the extended zone with FBA.
The issue stems from SharePoint and is due to an error in the access token generation when a user tries to load a document in the Office Web Apps.
The current workaround is to configure FBA authentication in the Default zone of the effected web application.
More information, please refer to the link:
http://blogs.technet.com/b/office_web_apps_server_2013_support_blog/archive/2014/03/20/office-web-apps-2013-errors-previewing-viewing-editing-documents-when-using-fba-in-the-extended-zone-but-not-the-default-zone.aspx
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Installation - Office Web Apps Server on SharePoint 2013 Foundation - Download missing
Hi all,
I'm trying to download Office Web Apps Server.
As of November 24th, the download was relocated on the Volume Licencing Center (as per this
link ).
Connected to VLCS, I'm trying to find the download from the tree / using filter..... I'm not finding anything.
Was the product renamed / not available at this time ?
ThxAre you aware of the type of subscription needed to download it?
The client I work for is a government department.... I think they have quite a big subscription!
Thx.
Update
I just found a great link to the list of products available thru the Volume Licensing Program
(http://www.microsoft.com/licensing/products/products.aspx#tab=2).
Office Web Apps Server requires an Office 2013 Licence.... We are checking this requirement right now... -
I have setup my Office Web App Environment following the following article.
http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
This is a production environment with HTTPS. I can go to
https://URL/hosting/discovery and it pulls up the XML like it should.
The setup seemed to go well but when I try to open the docs up from SharePoint I get he following errors.
When opening a Word Doc: "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word"
When opening a PowerPoint Doc: "Sorry, we couldn't open this presentation because we ran into a problem. Please try again."
When opening a Excel Doc: "We couldn't find the file you wanted. It's possible the file was renamed, moved or deleted."
I see suggestions for AllowOAthOverHttp but did not set this because it is HTTP. I also have the zone set to external-HTTPS.
Please let me know if you have any suggestions.
Thank you,Try to restart IIS. Then check if your domain
is is allowed to connect with office web apps server by running Get-OfficeWebAppsHost
cmdlet.
If your domain is not the the allowed list, add it by New-OfficeWebAppsHost -Domain <String>. -
Office web app error for one note only
There is strange error in my SharePoint 2013 farm with OWA. Everything works fine except for one note.
If you click in the notebook on the left hand side of the site, for first time everything works fine. When you try to click the same link second time, either server error comes up in chrome and nothing in IE. If i deactivate the web feature one note and
reactivate it, it works again for first time and nothing comes up for the second time. Error i see is
WOPIFrame -Unhandled exception: System.TimeoutException: The open operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The read
from the pipe did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.
Has anyone seen this behavior?
sachinHi,
According to your description, I think this issue is more related to SharePoint, I suggest that you could post it to
SharePoint forum.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Office Web Apps 2013 + could not establish trust relationship
We currently have a three tier SharePoint 2013 Farm:
1. Web Front End Server (Server 2008 R2 Enterprise) - Servername: TEST2SP013.domain.dom
2. Central Admin Server (Server 2008 R2 Enterprise) - Servername: TEST2SPCA013.domain.dom
3. SQL Server (Server 2012 Datacenter) - Servername: TESTSQL012.domain.dom
All Machines are in the same IP/Subnet.
We are trying to setup a new server (Server 2012 R2 Datacenter) (Servername: TEST022.domain.dom) to run Office Web Apps 2013 in our TEST environment to test the system before rolling in production and have had issues throughout the entire process.
The technet articles we have used are:
http://technet.microsoft.com/en-us/library/jj219435.aspx
http://technet.microsoft.com/en-us/library/ff431687.aspx
http://technet.microsoft.com/en-us/library/jj219627.aspx
We finally have what I thought was a correct setup but anytime we try to edit or view a word, excel, powerpoint document within SharePoint 2013, we receive "Sorry, there was a problem and we can't open this document. If this happens again, try opening
the document in Microsoft Word."
We found a few How-To Setup Office Web Apps sites where other people provided step-by step instructions:
blogs.msdn.com/b/sowmyancs/archive/2012/10/29/install-configure-amp-monitor-office-web-apps-2013-for-sp-2013.aspx
http://www.wictorwilen.se/office-web-apps-2013-securing-your-wac-farm
http://blogs.technet.com/b/justin_gao/archive/2013/06/30/configuring-office-web-apps-server-communication-using-https.aspx
We reviewed the ULS logs and found the following error:
02/14/2014 13:38:40.24 w3wp.exe (0x1C04) 0x1BB4 Office Web Apps
WAC Hosting Interaction adhsk Unexpected WOPI CheckFile: Catch-All Failure [exception:Microsoft.Office.Web.Common.EnvironmentAdapters.UnexpectedErrorException: HttpRequest failed ---> Microsoft.Office.Web.Apps.Common.HttpRequestAsyncException:
No Response in WebException ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate
is invalid according to the validation procedure. at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult) at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar) --- End of
inner exception stack trace --- at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at Microsoft.Office.Web.Apps.Common.Ht... 7bed0d51-511d-4541-a059-e2f72942e617
None of the article provide specific step-by-step instructions with using HTTPS in a test environment specifically when it comes to Self-Signed Certs through Active Directory Certificate Services.
We tried creating a Self-Signed Cert through IIS on the Office Web Apps Box which did not work.
We tried creating a Cert through Active Directory Certificate Services which did not work.
We tried adding the Cert through Central Admin > Security > Manage Trust which did not help.
We verified "get-spwopizone" is set to internal-https
We can access the Web Apps https://test022/hosting/discovery site and view the XML with no issue on any machine on our network.
We added our domain to the list of approved domains that can use Office Web Apps as well as add "Domain Users" as the security group that can "EDIT" Office Documents through Office Web Apps.
After each step, we tried performing either a system reboot or IIS Reset on the Office Web Appcs and WFE box.
My Question is how do we generate a certificate (either self-signed through IIS on the Office Web Apps Box or through AD) that will allow this application to work? I read that the Fully Qualified Domain Name needs to be in the SAN field of the Cert but when
we request it, I have no way of entering this information. I tried following http://technet.microsoft.com/en-us/library/ff625722 to manually request a certificate with a Custom SAN but that did not work either.
I am assuming the certificate issue is with the New Office Web Apps box. Is this correct?
-ChrisIf internal cert then you will have to add certificate from OWA to tursted certificates in each sharepoint server plus add the certificate from central admin in Sharepoint through manage trust. Also you will need to install p7b file (file that contains
path to root certificate to verify each intermediate certificate) for internal cert to each sharepoint server to not get certificate error.
sachin -
SharePoint 2013 - Office web apps intermittent issue
From past few weeks we are seeing issue while opening the documents from sites error message says “Sorry something went wrong + An unexpected error occur on the Server”. This happens with individual users accounts(Since it is
expected behavior with Service account for Office web Apps). After identifying on which server we are seeing the issue we are performing the
IIS reset on that effected Server and then issue will resolve but after a week or 10 days this is repeated again. If anyone has seen this issue in(SP2013+OWA) please share your inputs for permanent fix.
SubhashHi Cristian,
Below is the Log file. Please refer.
08/06/2014 11:41:09.73 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache air4a Monitorable Token Cache: Failed to get token from distributed cache for '0).w|s-1-5-21-2146773085-903363285-719344707-1611799'.(This
is expected during the process warm up or if data cache Initialization is getting done by some other thread). ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.73 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache air4b Monitorable Token Cache: Reverting to local cache to get the token for '0).w|s-1-5-21-2146773085-903363285-719344707-1611799'. ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation Application Authentication aiv3c Exception System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Configuration.ConfigurationChannelFactory`1[Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract],
cannot be used for communication because it is in the Faulted state. at System.ServiceModel.Channels.CommunicationObject.ThrowIfDisposed() at System.ServiceModel.ChannelFactory.EnsureOpened()
at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.GetInternalAppStsChannel() at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst)
StackTrace: at onetnative.dll: (sig=6aba1f5f-ccc4-4590-af00-b8ffe7fe99a0|2|onetnative.pdb, offset=28BE6) at onetnative.dll: (offset=152A9) ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation Unified Logging Service c91s Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSException14, 269cd32d "sharepoint foundation",
0f001144 "15.0.4420.0", b2c61fc4 "system.servicemodel", 0400766f "4.0.30319.0", 51d7762b "fri jul 05 18:43:07 2013", 000000e4 "000000e4", 00000063 "00000063", 96a3e724 "communicationobjectfaultedexception",
00215742 "aiv3c" ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation Application Authentication agmxo Exception System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Configuration.ConfigurationChannelFactory`1[Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract],
cannot be used for communication because it is in the Faulted state. at System.ServiceModel.Channels.CommunicationObject.ThrowIfDisposed() at System.ServiceModel.ChannelFactory.EnsureOpened()
at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.GetInternalAppStsChannel() at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst)
at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.RequestRawLoopbackToken(OAuth2EndpointIdentity endpointIdentity, JsonWebSecurityToken onBehalfOf, String applicationContext) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri
endpointAddress, SPIdentityContext identityContext, String applicationContext, DateTime& validTo) StackTrace: at onetnative.dll: (sig=6aba1f5f-ccc4-4590-af00-b8ffe7fe99a0|2|onetnative.pdb, offset=28BE6) at onetnative.dll: (offset=152A9) ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation Unified Logging Service c91s Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSException14, 269cd32d "sharepoint foundation",
0f001144 "15.0.4420.0", b2c61fc4 "system.servicemodel", 0400766f "4.0.30319.0", 51d7762b "fri jul 05 18:43:07 2013", 000000e4 "000000e4", 00000063 "00000063", 96a3e724 "communicationobjectfaultedexception",
0018c5ce "agmxo" ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation WOPI ajc39 Unexpected WOPIFrame - Unhandled exception: System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Configuration.ConfigurationChannelFactory`1[Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract],
cannot be used for communication because it is in the Faulted state. at System.ServiceModel.Channels.CommunicationObject.ThrowIfDisposed() at System.ServiceModel.ChannelFactory.EnsureOpened()
at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.GetInternalAppStsChannel() at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst)
at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.RequestRawLoopbackToken(OAuth2EndpointIdentity endpointIdentity, JsonWebSecurityToken onBehalfOf, String applicationContext) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri
endpointAddress, SPIdentityContext identityContext, String applicationContext, DateTime& validTo) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri endpointAddress, SPUser user,
String applicationContext, DateTime& validTo) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPWeb web, Guid uniqueId, String proofKeyId, SPUrlZone zone, SPBasePermissions perms, Boolean hasEditLicense, Int64& ttl)
at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPFile file, String proofKeyId, SPUrlZone zone, Int64& ttl) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetWOPITargetInternal(HttpContext httpContext, SPWeb web, Object&
spPrimeObject, SPWOPIAction& requestedAction, SPRegionalSettings spSettings, String& wopiAppUrl, String& wopiFavIconUrl, String& wopiAccessToken, Int64& wopiAccessTokenTtl, String& errorMessageToDisplay, String& redirectUrl)
at Microsoft.SharePoint.ApplicationPages.WOPIFrameHelper.OnLoadHelper(WOPIFrame frame) at Microsoft.SharePoint.ApplicationPages.WOPIFrameHelper.OnLoad(WOPIFrame frame) ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation General aat87 Monitorable An error has occurred on the server. ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:09.78 w3wp.exe (0x1688) 0x4764 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache: Documents/Srikanth_excel test.xlsx&action=default ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:19.97 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:19.97 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. ccecab9c-73c6-e096-b4ac-251e2bb15206
08/06/2014 11:41:19.97 w3wp.exe (0x1688) 0x4764 SharePoint Foundation DistributedCache air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException:
SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCacheInitializer.Init(Object state)'. ccecab9c-73c6-e096-b4ac-251e2bb15206 -
Error word web app can not open this document for viewing in office web apps 2010
Hi
i am receiving office web apps error.
i installed sharepoint 2010 on windows server 2012 datacenter,
and installed office web apps 2010 and sp2
adilHi Adil,
From the error message, I recommend to check the things below:
Check if Word Viewing service is started in Central Administration. If it is started, stop and re-start it.
Check if the Word Viewing service proxy is created.
Check if the Word Viewing service proxy is associated with web application with issue.
If above cannot work, please check the ULS log for further research.
More reference:
https://amalhashim.wordpress.com/2013/01/29/sharepoint-word-web-app-cannot-open-this-document-for-viewing-because-of-an-unexpected-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Using Office Web Apps Server with SharePoint Foundation 2013
I want to know whether I can configure Office Web Apps server to edit Excel documents on a SharePoint Foundation 2013 site.
I came across a TechNet article that states that "When used together with SharePoint Server 2013, Office Web Apps Server provides updated versions of Word Web App, Excel Web App, PowerPoint Web App, and OneNote Web App".
However, later in the same article, it states "If your organization licenses Office 2013 through a Volume Licensing program, you can enable Office Web Apps editing for SharePoint 2013 on-premises" (without mentioning Foundation or Server).Hi Lemesnil,
The Office Web App server should support the Edit licenses for SharePoin Foundation 2013, Office Web App is free to
download, you can also try installing and configuring in a test environment, see more from the below article applied to SharePoint Foundation 2013.
http://support.microsoft.com/kb/2886404/en-us
http://blogs.technet.com/b/speschka/archive/2012/12/31/enabling-licensing-and-editing-for-office-web-apps-in-sharepoint-2013.aspx
Anohter useful article aobut how to license Office Web App server, you can take a look.
http://blogs.technet.com/b/volume-licensing/archive/2013/05/22/how-to-license-office-web-apps-server.aspx
Thanks
Daniel Yang
TechNet Community Support -
Using office web apps with SharePoint 2013
Hi,
I would like to use office web apps in our SharePoint 2013 environment. I would like to know if OWA has to have a dedicated server or can I install it on the SharePoint 2013 app server.
SherazadWith SharePoint 2013, Office Web Apps cannot be installed on the SharePoint Server, it must be installed on its own server, not shared with any other IIS-based service (it essentially "takes over" IIS).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
IPhone wont show up in itunes after upgrading to leopard and iLife 08
Hello: For some reason, my iphone does not show up on my itunes after upgrading my mac to leopard and ilife 08. The phone was syncing properly before the upgrade. I also installed all the patches that were available for downloading but I did not try
-
How do I transfer songs from one laptop to another in iTunes?
How do I transfer songs from one laptop to another in iTunes?
-
Desktop in Trash involuntarily and I can't seem to get it back out.
Erm ok... am not rightly sure what has just happened. I was unraring some files... I went to empty my trash... and then before I knew it... the files I was unraring were in my trash and I was getting the error message that some of my files were in us
-
Inbound idoc creation by reading data from flat file in same system
Hi.. I have a flat file on my application server. I know the idoc type , message type and the FM to post the application document in SAP at the end when an idoc is created. Can someone tell me how do i create an idoc in sap reading the flat file data
-
Input objects and software monitoring
Okay, my set up: Macbook intel 1 gig RAM Edirol FA-66 Lacie external drive for audio The issue: The edirol has a peak meter which is just a light that comes on when the signal is too high, however, Logic is still perfectly happy with it, which means